Metal UV Curing Adhesives
from Dymax
Dymax Multi-Cure ® 6-621 adhesive is designed for rapid assembling of parts made of metal, glass, ceramic, phenolic, filled polyamide, and other substrate materials. The material is specially formulated to cure with heat in applications where shadow areas exist. This product is curable with... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates; ABS; EP; PA; Phenolic Plastic; Ceramic; AL; CU; Glass; CRS; Stainless Steel
- Industry: coil winding, potting, as well as metal-to-glass bonding.
- Cure / Technology: UV or Radiation Cured
- Viscosity: 800
from Master Bond, Inc.
UV17Med is a low viscosity, UV curable system with an affinity for bonding to a wide array of thermoplastic urethanes and passes stringent ISO10993-5 cytotoxicity standards. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Features: High Dielectric; Non-corrosive; Sealant
from Hernon Manufacturing, Inc.
Ultrabond ® 787 is a one component, thixotropic adhesive, which cures when exposed to ultraviolet radiation and/or visible light of sufficient intensity. Ultrabond ® 787 is primarily used for bonding rigid and flexible PVC to polycarbonate where large gap filling capabilities and a... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Variety of substrates including glass, many plastics and most metals
- Cure / Technology: UV or Radiation Cured
- Chemical System: Vinyl
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Dymax
Dymax Multi-Cure ® 6-630-T structural bonding adhesive cures in seconds for fast assembly of parts made of metal, glass, ceramic, phenolic, filled polyamide, and other substrates. The product demonstrates excellent flexibility and is high-temperature and moisture-resistant. The material cures... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates; ABS; PEEK; PEI; PSU; PVC; AL; Stainless Steel; Glass
- Industry: automotive latch assembly, potting, and bonding glass fixtures and furniture.
- Cure / Technology: UV or Radiation Cured
- Viscosity: 6000
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
- Composition: Filled
- Type / Form: Liquid
from Dymax
Dymax 9803 low shrinkage optical epoxy adhesive offers superior adhesion for common substrates used in camera modules and LiDAR assemblies, in active alignment, and other optical bonding applications. The adhesive has the unique flexibility to cure in seconds with LED and/or UV/Visible light as well... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates; ABS; CAP; FR-4 Board; LCP; PC; PET; PPS; PS; Stainless Steel; Aluminum; Glass; Magnesium
- Type / Form: Gel
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: used in camera modules and LiDAR assemblies, in active alignment, and other optical bonding applications.
from Master Bond, Inc.
Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It is toughened and flexible, allowing it to withstand rigorous thermal cycling. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
from Dymax
Dymax 9906-AA is a heat and/or LED light-curable epoxy adhesive designed specifically for use in Asia. This active alignment adhesive meets NASA ASTM E595 low-outgassing specifications making it ideal for critical optical components, camera modules, LiDAR (Light Detection and Ranging, and other ADAS... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates; ABS; CAP; FR-4 Board; LCP; PC; PET; PPS; PS; Stainless Steel; Aluminum; Glass; Magnesium
- Type / Form: Gel
- Cure / Technology: UV or Radiation Cured
- Industry: lens bonding, bonding the lens barrel to holder, or bonding the holder to printed circuit boards (PCBs).
from Master Bond, Inc.
Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Dymax
Dymax Low-Shrink ™ OP-81-LS is a UV/Visible light-curable optical adhesive epoxy with very low shrinkage during cure and is ideal for rapid positioning of optical components. OP-81-LS cures with UV light and includes a low-temperature heat-curing function in applications where shadow areas... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates; CAP; PS; FR-4; PA; PC; PETG; PMMA; SAN; Glass, Aluminum, Stainless Steel
- Type / Form: Gel
- Cure / Technology: UV or Radiation Cured; Single Component
- Viscosity: 60000
from Master Bond, Inc.
Key Features. Outstanding physical properties. Superb chemical resistance. Bonds well to many types of plastics. Withstands thermal cycling. Product Description. Master Bond UV18S is a specialty UV curable system for bonding, featuring good strength, toughness, and chemical resistance. It cures... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Features: High Dielectric; Sealant
from Dymax
Multi-Cure ® 6-621-VT adhesive quickly bonds parts made of metal, ceramic, glass, phenolic plastics, polyamide (filled/unfilled), and other substrate materials. 6-621-VT cures with UV/Visible light, heat, or pre-applied activator. The product features secondary heat cure for applications where... [See More]
- Substrate Compatibility: Metal; ABS; EP; PA; Phenolic plastic; CER; AL; CU; GL; CRS; Stainless Steel
- Industry: coil winding, metal-to-glass bonding, as well as potting.
- Cure / Technology: UV or Radiation Cured
- Viscosity: 14000
from Master Bond, Inc.
Master Bond UV10TK40M is a higher viscosity, one part UV system for bonding, sealing and coating with good optical clarity, excellent physical properties and a high glass transition temperature. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; UV curing system
- Composition: Unfilled
- Type / Form: Liquid
from Master Bond, Inc.
Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Features: High Dielectric; Encapsulant, Potting Compound; Laminaes; Non-corrosive; Sealant; Thermal Insulation
from Epoxy Technology
EPO-TEK ® UV Epoxies are your alternative to traditional oven cured optical products. They are fast curing and photo curable. These UV cure adhesives simplify the handling process by using a single component system. Our adhesives require no mixing, cure in seconds or minutes, and have an... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Electro-Lite Corporation
ELC-2500 clear is a standard potting and encapsulating material. Also used to adhere and fixture. The adhesive is clear an enables the identification of specific board populations. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Rubber or Elastomer
- Cure / Technology: UV or Radiation Cured
- Chemical System: Epoxy
- Type / Form: Liquid
from Shenzhen DeepMaterial Technologies Co., Ltd
Designed to bond metal and glass substrates. Typical applications include furniture (bonding stainless steel and tempered glass) and decorations (Copper bonded crystal glass). [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured
from Henkel Corporation - Industrial
Fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. LOCTITE ® 4311 is a light yellow-green to dark blue-green, transparent, fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. The UV-cure properties facilitate rapid curing of exposed... [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: Sanitary
from ND Industries, Inc.
Vibra-Tite light cure adhesives are single-part, photo-initiated acrylates that cure on demand when exposed to UV-light. Almost instant cure. Some cure with very low intensity. Flexible or rigid products available. High optical clarity & non-yellowing. Bonds a wide range of substrates [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: Electronics; Electric Power
from Epoxies Etc...
UV Cure 60-7112 is a non-yellowing UV Curable urethane system. It is designed to provide low stress on electronic components and outstanding adhesion to a variety of substances. UV Cure 60-7112 also has high impact strength and flexibility. This material is a good choice when water and weather... [See More]
- Substrate Compatibility: Composites; Metal; Plastic
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Type / Form: Liquid
from Protavic America, Inc.
ANA-97773 is a very fast curing adhesive that is fully cured and at its ultimate hardness in seconds. Other similar UV materials continue to harden for several minutes causing continued shrinkage and movement. Bond lines are clear, colorless and exhibit low shrinkage during the curing process. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Thermoset; Two Component ; UV or Radiation Cured
- Composition: Unfilled
- Type / Form: Liquid
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of ultraviolet curing adhesives and compounds, the Ultrabond ® line of products. These products are single component systems offering either ultraviolet light or ultraviolet light & primer initiated curing mechanisms. All Ultrabond ® products cure upon... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from ThreeBond International, Inc.
Our Cyanoacrylates are excellent fast acting all-purpose low viscosity adhesives. These instant adhesives cure in seconds for use on a wide range of materials including metals, plastics, rubber, wood, and inorganic materials. ThreeBond offers several types of instant adhesives: gel, low-odor, low... [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer; Wood
- Industry: Automotive
- Cure / Technology: UV or Radiation Cured
- Viscosity: 2
from Henkel Corporation - Industrial
UV, liquid acrylic adhesive for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance. LOCTITE ® AA 3933 is a transparent to slightly hazy, UV acrylic, instant, liquid adhesive suitable for a wide variety of applications requiring fast cure,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Epoxies Etc...
UV 60-7016 is a high performance Ultraviolet Curable Adhesive, Sealant, and Potting Compound. This new one component urethane acrylate system was specifically designed for the difficult bonding of glass to metal. UV 60-7016 has outstanding thermal shock and impact resistance, and is an excellent... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: UV or Radiation Cured; Single Component
from Protavic America, Inc.
PNU 46220 ™ is an electronics grade; unfilled, room temperature fast curing; two-component polyurethane adhesive is designed for the adhesion and encapsulation of circuit boards, circuit board components and for screw-thread sealing. The cured materials provide long-term circuit protection and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic
- Composition: Filled
- Chemical System: Polyurethane
- Cure / Technology: Thermoset; Two Component ; UV or Radiation Cured
from Henkel Corporation - Industrial
Fluorescent, UV acrylic light cure adhesive liquid primarily designed for bonding plastic substrates where a flexible, tough bond is required. LOCTITE ® AA 3944 is a transparent to hazy, fluorescent, UV acrylic light cure adhesive liquid primarily designed for bonding plastic substrates where a... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Henkel Corporation - Industrial
Epoxy colorless/slightly yellowish adhesive for applications demanding high structural, mechanical, and electrical insulating properties. LOCTITE ® EA 3336 is a colorless to slightly yellowish, 2-part, medium-viscosity, epoxy adhesive liquid for potting, bonding, sealing, and laminating... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Two Component ; UV or Radiation Cured
- Chemical System: Epoxy
- Type / Form: Liquid
from Henkel Corporation - Industrial
Translucent, viscous, UV light/moisture-cure acetoxy adhesive good for elastic bonding, sealing and leak-proofing on glass, metals and ceramics. LOCTITE ® SI 5083 is a translucent, slightly milky, UV light and atmospheric moisture-cured, thixotropic acetoxy silicone adhesive paste which forms a... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Silicone
- Viscosity: 55000