Plastic UV Curing Adhesives
from Dymax
3069 adhesive cures in seconds upon exposure to UV/Visible light to rapidly bond and laminate both flexible and rigid substrates. The fast-curing material adheres to many different plastics including PVC, polycarbonate, polyurethane, PET, PETG, as well as ABS. The bond strength of this product on PC... [See More]
- Substrate Compatibility: Plastic; ABS; COPE; PC; PEBA; PET; PETG; PS; PU; PVC
- Industry: flexible lamination, plastic housing assembly, appliance assembly, and speaker assembly.
- Cure / Technology: UV or Radiation Cured
- Viscosity: 450
from Master Bond, Inc.
UV17Med is a low viscosity, UV curable system with an affinity for bonding to a wide array of thermoplastic urethanes and passes stringent ISO10993-5 cytotoxicity standards. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Features: High Dielectric; Non-corrosive; Sealant
from Hernon Manufacturing, Inc.
Ultrabond ® 787 is a one component, thixotropic adhesive, which cures when exposed to ultraviolet radiation and/or visible light of sufficient intensity. Ultrabond ® 787 is primarily used for bonding rigid and flexible PVC to polycarbonate where large gap filling capabilities and a... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Variety of substrates including glass, many plastics and most metals
- Cure / Technology: UV or Radiation Cured
- Chemical System: Vinyl
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Dymax
Dymax 3094-T-REV-A plastic bonding adhesive cures with high-intensity UV/Visible light in seconds for “on-demand ” rapid bonding and sealing of a variety of plastics. The product adheres well to polycarbonate (PC), polyurethane (PU), polystyrene (PS), and even liquid-crystal polymer... [See More]
- Substrate Compatibility: Plastic; ABS; LCP; PA; PC; PCTG; PET; PETG; PMMA; PS; PVC; SAN
- Industry: plastic and household appliance assembly, as well as compact camera module (CCM) assembly.
- Cure / Technology: UV or Radiation Cured
- Viscosity: 11750
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
- Composition: Filled
- Type / Form: Liquid
from Dymax
9211-W low-stress plastic bonding adhesive cures with UV/Visible light energy for ultra-fast bonding and sealing of camera module components found in consumer wearable devices. This product forms excellent bonds to PC, LCP, ABS, and FR4 substrates and is specifically designed for CCM applications... [See More]
- Substrate Compatibility: Plastic; LCP, PC, ABS, FR4
- Industry: designed for CCM applications and camera module barrel fixtures
- Cure / Technology: UV or Radiation Cured; Single Component
- Viscosity: 20000
from Master Bond, Inc.
Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms. It is toughened and flexible, allowing it to withstand rigorous thermal cycling. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
from Master Bond, Inc.
Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Master Bond, Inc.
Key Features. Outstanding physical properties. Superb chemical resistance. Bonds well to many types of plastics. Withstands thermal cycling. Product Description. Master Bond UV18S is a specialty UV curable system for bonding, featuring good strength, toughness, and chemical resistance. It cures... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Features: High Dielectric; Sealant
from Master Bond, Inc.
Master Bond UV10TK40M is a higher viscosity, one part UV system for bonding, sealing and coating with good optical clarity, excellent physical properties and a high glass transition temperature. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; UV curing system
- Composition: Unfilled
- Type / Form: Liquid
from Master Bond, Inc.
Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Features: High Dielectric; Encapsulant, Potting Compound; Laminaes; Non-corrosive; Sealant; Thermal Insulation
from Epoxy Technology
EPO-TEK ® UV Epoxies are your alternative to traditional oven cured optical products. They are fast curing and photo curable. These UV cure adhesives simplify the handling process by using a single component system. Our adhesives require no mixing, cure in seconds or minutes, and have an... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Electro-Lite Corporation
ELC-2500 clear is a standard potting and encapsulating material. Also used to adhere and fixture. The adhesive is clear an enables the identification of specific board populations. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Rubber or Elastomer
- Cure / Technology: UV or Radiation Cured
- Chemical System: Epoxy
- Type / Form: Liquid
from Shenzhen DeepMaterial Technologies Co., Ltd
High thixotropy, suitable for filling and bonding of large gaps, suitable for materials with low surface energy and difficult to stick. Surfaces such as PTFE, PE, PP are low-energy surfaces. [See More]
- Substrate Compatibility: Plastic
- Features: Sealant
- Cure / Technology: UV or Radiation Cured
from Henkel Corporation - Industrial
Fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. LOCTITE ® 4311 is a light yellow-green to dark blue-green, transparent, fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. The UV-cure properties facilitate rapid curing of exposed... [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: Sanitary
from ND Industries, Inc.
Vibra-Tite light cure adhesives are single-part, photo-initiated acrylates that cure on demand when exposed to UV-light. Almost instant cure. Some cure with very low intensity. Flexible or rigid products available. High optical clarity & non-yellowing. Bonds a wide range of substrates [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: Electronics; Electric Power
from Epoxies Etc...
UV Cure 60-7112 is a non-yellowing UV Curable urethane system. It is designed to provide low stress on electronic components and outstanding adhesion to a variety of substances. UV Cure 60-7112 also has high impact strength and flexibility. This material is a good choice when water and weather... [See More]
- Substrate Compatibility: Composites; Metal; Plastic
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Type / Form: Liquid
from Protavic America, Inc.
ANA-97773 is a very fast curing adhesive that is fully cured and at its ultimate hardness in seconds. Other similar UV materials continue to harden for several minutes causing continued shrinkage and movement. Bond lines are clear, colorless and exhibit low shrinkage during the curing process. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Thermoset; Two Component ; UV or Radiation Cured
- Composition: Unfilled
- Type / Form: Liquid
from Chemence Inc.
Krylex KU3064 is a revolutionary odorless light curing cyanoacrylate adhesive. It is designed for bonding applications that require very rapid fixture, fillet cure or surface cure. The UV / visible light cure properties facilitate rapid curing of exposed surface areas while the moisture curing... [See More]
- Substrate Compatibility: Plastic
- Type / Form: Liquid
- Cure / Technology: Anaerobic; UV or Radiation Cured; Single Component; Reactive or Moisture Cured
- Features: Encapsulant, Potting Compound
from ThreeBond International, Inc.
Our Cyanoacrylates are excellent fast acting all-purpose low viscosity adhesives. These instant adhesives cure in seconds for use on a wide range of materials including metals, plastics, rubber, wood, and inorganic materials. ThreeBond offers several types of instant adhesives: gel, low-odor, low... [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer; Wood
- Industry: Automotive
- Cure / Technology: UV or Radiation Cured
- Viscosity: 2
from Henkel Corporation - Industrial
UV, liquid acrylic adhesive for a wide variety of applications that require fast cure, flexibility, high adhesion and autoclave resistance. LOCTITE ® AA 3933 is a transparent to slightly hazy, UV acrylic, instant, liquid adhesive suitable for a wide variety of applications requiring fast cure,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Epoxies Etc...
UV 60-7160 is a one component, UV light curable, clear coating. 60-7160 is water clear and exhibits superior yellowing resistance. This product has been formulated to cure instantly when exposed to high intensity ultraviolet light. 60-7160 has excellent adhesion to a variety of substrates and is... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: UV or Radiation Cured; Single Component
from Protavic America, Inc.
PNU 46220 ™ is an electronics grade; unfilled, room temperature fast curing; two-component polyurethane adhesive is designed for the adhesion and encapsulation of circuit boards, circuit board components and for screw-thread sealing. The cured materials provide long-term circuit protection and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic
- Composition: Filled
- Chemical System: Polyurethane
- Cure / Technology: Thermoset; Two Component ; UV or Radiation Cured
from ThreeBond International, Inc.
Our UV curable resins are materials that are polymerized and cured in a short time by the energy radiated from ultraviolet irradiation devices. We offer our UV curing adhesives in many variations to meet almost any industrial need. Curing is completed in several seconds through UV light irradiation. [See More]
- Substrate Compatibility: Plastic; Rubber or Elastomer
- Viscosity: 5000
- Cure / Technology: UV or Radiation Cured
from Henkel Corporation - Industrial
UV/Light cure acrylic adhesive for medical bonding applications where fluorescent properties of substrates interfere with the detection of adhesives. LOCTITE ® AA 3979 is a translucent to hazy yellow gel, 1-part, UV/Visible light cure acrylic designed for medical bonding applications where the... [See More]
- Substrate Compatibility: Plastic
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Henkel Corporation - Industrial
Epoxy colorless/slightly yellowish adhesive for applications demanding high structural, mechanical, and electrical insulating properties. LOCTITE ® EA 3336 is a colorless to slightly yellowish, 2-part, medium-viscosity, epoxy adhesive liquid for potting, bonding, sealing, and laminating... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Two Component ; UV or Radiation Cured
- Chemical System: Epoxy
- Type / Form: Liquid