CANopen Servo Drives
from ElectroCraft
The ElectroCraft PRO Series Programmable Servo Drives are based on the latest in digital drive technology, offering a cost effective, compact and modular solution for the control of rotary or linear brushless, stepper or PMDC brush motors. The ElectroCraft PRO Series drives integrate advanced motion... [See More]
- Communication: CANbus; CANopen; USB
- Axes: 1.0
- Description: Speed Controller
- Motor / System: DC Brushed; DC Brushless
from Kollmorgen Corporation
This digital multi-axis system operates directly from 115 to 400 VAC lines and provides output current of 3 or 6 Amps RMS/phase, continuous. It supports 1 master and up to 7 extension axes, is CANopen compatible, and is fully programmable via an RS232 interface. These drives are supported for... [See More]
- Communication: CANopen; RS232
- Drive Architecture: Digital
- Description: Multi-Axis; Amplifier
- AC Input: 115 to 400
from Parker Hannifin / Automation / Electromechanical Division - Europe
The Aries Controller combines the versatile and cost-effective Aries digital servo drive platform with the advanced control capabilities of the ACR servo controller into a single product, the Aries Controller single-axis drive-controller. Ethernet TCP communications. 3 power levels up to 6.3A... [See More]
- Communication: CANopen; Ethernet; RS232; RS485; USB
- Drive Architecture: Analog
- Description: Controller / Drive
- Axes: 1.0
from Gefran
The line of SIEIDrive AXV300 modular drives is the result of the experience gained by Gefran in over 30 years of working in close partnership with the leading industrial automation manufacturers. Powering each “multi-axis ” system by means of “common DC bus ” ensures the... [See More]
- Communication: CANopen; Ethernet
- Commutation: Sinusoidal
- Drive Architecture: Analog; Digital
- AC Input: 400
from Delta Electronics (Americas)
To meet the demanding requirements of stand-alone or distributed motion control applications in industrial automation and satisfy the needs of high-precision positioning control requested by machine designers and system integrators, Delta launched the high performance motion control ASDA-A2 series... [See More]
- Communication: CANopen; RS232; RS422; RS485; USB
- Drive Architecture: Digital
- Description: Speed Controller; Amplifier; Regenerative; Pulse Width Modulation Drive; DSP; MCU; Controller / Drive
- Axes: 1.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Communication: CANopen; DeviceNet; Ethernet; Interbus-S; PROFIBUS; RS485; SERCOS; Modbus RTU Standard, Optional; EtherCAT, CTNet, CTSync
- Drive Architecture: Analog; Digital
- Description: Speed Controller; Variable Speed; Regenerative
- Axes: 1.0
from Kollmorgen Corporation
AKD2G features include dual-axis, expandable I/O (without increasing the size), removable memory, dual-channel STO, and the first drive-resident graphic display in the industry. The AKD2G is optimized for single-connector AKM2G and AKM (with or without brake) reducing wiring with single hybrid cable... [See More]
- Communication: CANopen; EtherCAT
- Drive Architecture: Digital
- Description: Multi-Axis (optional feature)
- Axes: 2.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Available in both 120/240 VAC and 480 VAC input versions. Current output from 2.5A RMS continuous to 155A RMS continuous. Available with ETHERNET Powerlink. Certified Category 3 Safety (EN954-1 Cat. 3). Programs in all five IEC61131-3 International programming standard. Scalable control technology:... [See More]
- Communication: CANopen; DeviceNet; Ethernet; PROFIBUS; RS232; RS485; EtherCAT
- Drive Architecture: Analog
- Description: Regenerative; Controller / Drive
- Axes: 1.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Communication: CANopen; DeviceNet; Ethernet; Interbus-S; PROFIBUS; RS485; SERCOS; Modbus RTU Standard, Optional; EtherCAT, CTNet, CTSync
- Drive Architecture: Analog; Digital
- Description: Speed Controller; Variable Speed; Regenerative
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Drive for Brushless and Asynchronous Motors. High performance drive. Brushless and asynchronous motors control. From 2 to 150 Arms continuous current. Resolver, incremental/less wire encoder, SinCos+EnDat and SinCos+Hiperface absolute encoderfeedback. Positioner with speed trapezoidal profile. [See More]
- Communication: CANopen; DeviceNet (optional feature); Ethernet (optional feature); PROFIBUS (optional feature); RS232; RS422; RS485; SERCOS (optional feature)
- Drive Architecture: Analog (optional feature); Digital (optional feature)
- Description: Speed Controller; Controller / Drive
- Axes: 1.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Communication: CANopen; DeviceNet; Ethernet; Interbus-S; PROFIBUS; RS485; SERCOS; Modbus RTU Standard, Optional; EtherCAT, CTNet, CTSync
- Drive Architecture: Analog; Digital
- Description: Speed Controller; Variable Speed; Regenerative
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Up to 8 axes of servo or stepper control. 150 MFLOPS, 32-bit floating-point DSP. Advanced Multitasking of up to 24 simultaneous programs. Interpolation of 8 axes in any combination. Up to 10 encoder inputs at 20 MHz. 10/100 Base-T Ethernet. Supports EtherNet/IP protocol. USB2.0. Absolute Encoder... [See More]
- Communication: CANopen; Ethernet; RS232; RS485; USB
- Drive Architecture: Analog
- Description: Multi-Axis
- Axes: 2.0 to 8.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Communication: CANopen; DeviceNet; Ethernet; Interbus-S; PROFIBUS; RS485; SERCOS; Modbus RTU Standard, Optional; EtherCAT, CTNet, CTSync
- Drive Architecture: Analog; Digital
- Description: Speed Controller; Variable Speed; Regenerative
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
ETHERNET Powerlink expands the ACR9000 family by adding real-time motion control over standard Ethernet. The high-speed digital communications network enhances machine performance and configuration possibilities while reducing set-up time and installation complexity. Control of 16 ETHERNET Powerlink... [See More]
- Communication: CANopen; Ethernet; RS232; RS485; USB
- Axes: 1.0
- Description: Controller / Drive
- Resolution: 12
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Communication: CANopen; DeviceNet; Ethernet; Interbus-S; PROFIBUS; RS485; SERCOS; Modbus RTU Standard, Optional; EtherCAT, CTNet, CTSync
- Drive Architecture: Analog; Digital
- Description: Speed Controller; Variable Speed; Regenerative
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Compact Digital Servo Drive. From 1.25Arms to 15Arms continuous current. 230 VAC, 1 and 3 phase operation. Internal braking resistor. Resolver and incremental encoder feedback. +-10V velocity and torque control, Step & direction input for position control, Current, torque and speed control. [See More]
- Communication: CANbus; CANopen; DeviceNet (optional feature); PROFIBUS (optional feature)
- Drive Architecture: Digital
- Description: Multi-Axis
- Axes: 1.0 to 32.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Communication: CANopen; DeviceNet; Ethernet; Interbus-S; PROFIBUS; RS485; SERCOS; Modbus RTU Standard, Optional; EtherCAT, CTNet, CTSync
- Drive Architecture: Analog; Digital
- Description: Speed Controller; Variable Speed; Regenerative
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Feedback supported: Resolver, SinCos, SinCos + EnDat, SinCos + Hiperface, SinCos (1 per pole pitch), Quadrature, Quadrature + Hall, SinCos + Hall, EnDat 2.2. Auxiliary Encoder: 1 in input and 1 in output for each axis. I/O: 4 digital Input, 2 digital output, 1 analog input and 1 analog output for... [See More]
- Communication: CANopen; DeviceNet (optional feature); PROFIBUS (optional feature); USB; EtherCAT
- Drive Architecture: Digital
- Description: Multi-Axis
- Axes: 1.0 to 3.0
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Communication: CANopen; DeviceNet; Ethernet; Interbus-S; PROFIBUS; RS485; SERCOS; Modbus RTU Standard, Optional; EtherCAT, CTNet, CTSync
- Drive Architecture: Analog; Digital
- Description: Speed Controller; Variable Speed; Regenerative
- Axes: 1.0