Linear Motor Servo Drives
from Yaskawa America, Inc. - Motion Division
10W to 55kW, 1.6 kHz Bandwidth. The Sigma-5 servo amplifier delivers the highest performance in the industry due its unmatched frequency response, reduced settling times and more precise control. In addition it provides a faster set up, simpler tuning, and vibration suppression. With a wide range of... [See More]
- Description: Multi-Axis; Speed Controller; Amplifier
- Axes: 1.0
- Drive Architecture: Analog
- Commutation: Sinusoidal
from Citizen Chiba Precision Co., Ltd.
Special Features. This motor driver is designed with a PWM control method to output 3 phase sine wave. This motor driver is designed for exclusive use of our ultra miniaturized linear actuators. Preprogrammed thrust control or position control can be selected by input signal. Two types of... [See More]
- Description: Pulse Width Modulation Drive
- Continuous Current: 3
- DC Input: 24
- Peak Current: 10
from Aerotech, Inc.
Design Features. Drive brush or brushless motors. Modular design. 10 or 20 A peak models. Self-commutation. Complete electrical isolation. Integrated or external power supply [See More]
- Description: Amplifier; Variable Speed
- Axes: 1.0
- Drive Architecture: Analog
- Motor / System: DC Brushed; DC Brushless; DC Servo
from Schneider Electric
Schneider Electric industrial automation and control products and solutions cover the breadth of the industrial, infrastructure and building sectors -- from programmable relays to motion controllers and interface modules, for applications from simple machines to complex process systems. [See More]
- Power: 50 to 11000
from Galil
The AMP-43640 contains four linear, transconductance amplifiers for driving brushless servo motors with sinusoidal commutation. The AMP-43640 requires 15-30 VDC, and the gain setting of each amplifier is 0.1 A/V at 1 A maximum current. Hall sensors are not required for brushless motor commutation. [See More]
- Description: Amplifier; MCU
- Axes: 4.0
- Drive Architecture: Analog
- Commutation: Trapezoidal
from H2W Technologies
The LCAM-5/15 Power Amplifier is a linear power amplifier designed to drive loads in current mode. The amplifier is best suited for low inductive loads such as voice coil actuators. The unit displays low noise, wide bandwidth and an offset voltage adjustable to zero. Designed to run from a single... [See More]
- Description: Amplifier
- DC Input: 24 to 70
- Drive Architecture: Analog
- Continuous Current: 5
from Citizen Chiba Precision Co., Ltd.
Special Features. This motor driver is designed with a PWM control method to output 3 phase sine wave. This motor driver is designed for exclusive use of our ultra miniaturized linear actuators. Preprogrammed thrust control or position control can be selected by input signal. Two types of... [See More]
- Description: Pulse Width Modulation Drive
- Continuous Current: 3
- DC Input: 24
- Peak Current: 10
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Description: Multi-Axis; Amplifier; Variable Speed; Pulse Width Modulation Drive; DSP
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Galil
The CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port and up... [See More]
- Description: PC-Based; Amplifier; Pulse Width Modulation Drive; MCU; Controller / Drive
- Axes: 1.0
- Drive Architecture: Analog; Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Description: Multi-Axis; Amplifier; Variable Speed; Pulse Width Modulation Drive; DSP
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Galil
The DMC-22x0 stand-alone motion controller is a member of the Optima Series, Galil's prior-generation, multi-axis motion controllers. The DMC-22x0 features 10Base-T/100Base-T Ethernet connectivity. The controller is packaged in a compact, rugged enclosure and contains an internal power supply for... [See More]
- Description: Multi-Axis; PC-Based; Amplifier; Regenerative; Pulse Width Modulation Drive; MCU; Controller / Drive (optional feature)
- Axes: 2.0
- Drive Architecture: Analog; Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Current Loop, Digital Diagnostics
from Aerotech, Inc.
Design Features. Up to eight integrated drives in one stand-alone controller. Additional external drive axes can be added to provide up to ten axes of coordinated motion. Controller architecture capable of coordinating motion of up to five independent tasks. Capable of driving and controlling linear... [See More]
- Description: Multi-Axis; Amplifier; Pulse Width Modulation Drive; DSP; Controller / Drive
- Axes: 1.0 to 8.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Galil
Galil's AMP-19540 is a 4-axis amplifier for driving brush or brushless motors up to 500 Watts. By interfacing directly to Galil's DMC-18x2, DMC-18x0, or DMC-18x6 controllers, it provides a cost-effective controller/drive solution for multi-axis applications. The AMP-19540 contains four... [See More]
- Description: Multi-Axis; Amplifier; Regenerative; Pulse Width Modulation Drive; MCU; Controller / Drive (optional feature)
- Axes: 2.0 to 4.0
- Drive Architecture: Analog; Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Current Loop, Digital Diagnostics
from Aerotech, Inc.
Design Features. Up to six integrated drives in one stand-alone controller. Additional external drive axes can be added to provide up to nine axes of coordinated motion. Controller architecture capable of coordinating motion of up to five independent tasks. Capable of driving and controlling linear... [See More]
- Description: Multi-Axis; Pulse Width Modulation Drive; DSP; Controller / Drive
- Axes: 6.0 to 9.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Galil
The DMC-300xx Series is Galil's latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. The DMC-300xx is available as a compact card-level or box-level unit and connects to a stepper or servo motor amplifier of any power range. Or,... [See More]
- Description: Pulse Width Modulation Drive; Controller / Drive
- Axes: 1.0
- Drive Architecture: Analog
- Motor / System: DC Brushless; DC Servo
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Description: Multi-Axis; Amplifier; Variable Speed; DSP
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Description: Multi-Axis; Amplifier; Variable Speed; Pulse Width Modulation Drive; DSP
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Description: Multi-Axis; Amplifier; Variable Speed; Pulse Width Modulation Drive; DSP
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Description: Pulse Width Modulation Drive; DSP; Controller / Drive
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo
from Aerotech, Inc.
Design Features. Output power of 10 A peak. 2-phase AC line input. CE approval. Linear power stages. Digital current, velocity, and position loops for improved motion stability. Optional integrated encoder multiplier for higher throughput and reduced wiring. Flexible design provides ability to drive... [See More]
- Description: PC-Based; Amplifier
- Motor / System: Voice Coil
- Drive Architecture: Analog; Digital
- Resolution: 16
from Aerotech, Inc.
Design Features. Output power range 10 A peak to 30 A peak at 320 VDC. Single-phase AC line input. CE approved and UL listed. PWM power stages. Digital current, velocity, and position loops for improved motion stability. Optional integrated encoder multiplier for higher throughput and reduced... [See More]
- Description: PC-Based; Amplifier
- Resolution: 16
- Drive Architecture: Analog; Digital
- PC-Based Bus: Other; Modbus
from Aerotech, Inc.
Design Features. Output power range of 10 or 20 A peak. Single-phase AC line input. CE approval. Linear power stages. Digital current, velocity, and position loops for improved motion stability. Optional integrated encoder multiplier for higher throughput and reduced wiring. Flexible design provides... [See More]
- Description: PC-Based; Amplifier
- Motor / System: Voice Coil
- Drive Architecture: Analog; Digital
- Resolution: 16
from Aerotech, Inc.
Design Features. Wide output power range from 10 A peak to 150 A peak at 320 VDC. 3-phase AC line input. CE approved and UL listed. PWM power stages. Digital current, velocity, and position loops for improved motion stability. Optional integrated encoder multiplier for higher throughput and reduced... [See More]
- Description: PC-Based; Amplifier
- Resolution: 16
- Drive Architecture: Analog; Digital
- PC-Based Bus: Other; Modbus TCP
from Aerotech, Inc.
Design Features. Output power of 10 A peak. DC input. CE approval. Linear power stages. Digital current, velocity, and position loops for improved motion stability. Optional integrated encoder multiplier for higher throughput and reduced wiring. Flexible design provides ability to drive brushless... [See More]
- Description: PC-Based; Amplifier
- Motor / System: Voice Coil
- Drive Architecture: Analog; Digital
- Resolution: 16
from Aerotech, Inc.
Design Features. Output power range up to 10 A peak. DC input. CE approved and UL listed. PWM power stages. Digital current, velocity, and position loops for improved motion stability. Optional integrated encoder multiplier for higher throughput and reduced wiring. Flexible design provides ability... [See More]
- Description: PC-Based; Amplifier
- Resolution: 16
- Drive Architecture: Analog; Digital
- PC-Based Bus: Other; Modbus TCP
from Aerotech, Inc.
Design Features. 3U plug-in drives. 19 inch rack-mount design. Flexible design provides the ability to drive brush, brushless, or stepper motors with the same amplifier. 5 A to 30 A peak output current. PWM or linear amplifier. Integral power supplies. IEEE-1394 FireWire interface. Digital current,... [See More]
- Description: Multi-Axis; Pulse Width Modulation Drive; DSP; Controller / Drive
- Axes: 1.0 to 6.0
- Drive Architecture: Digital
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo