Sinusoidal Servo Drives
from ElectroCraft
The ElectroCraft PRO Series Programmable Servo Drives are based on a new design concept offering a cost effective, compact and modular solution for the control of rotary or linear brushless, stepper or PMDC brush motors of powers up to 1600W, with 80V nominal voltage. Designed to support both low... [See More]
- Commutation: Sinusoidal; Trapezoidal
- Axes: 1.0
- Description: Speed Controller
- DC Input: 11 to 50
from Yaskawa America, Inc. - Motion Division
10W to 55kW, 1.6 kHz Bandwidth. The Sigma-5 servo amplifier delivers the highest performance in the industry due its unmatched frequency response, reduced settling times and more precise control. In addition it provides a faster set up, simpler tuning, and vibration suppression. With a wide range of... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog
- Description: Multi-Axis; Speed Controller; Amplifier
- Axes: 1.0
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Commutation: Sinusoidal; Trapezoidal
- Axes: 1.0
- Description: Speed Controller
- Motor / System: DC Brushed; DC Brushless
from Yaskawa America, Inc. - Motion Division
The SGMJV small capacity brushless Sigma-5 servo motor can be used in a variety of applications. Features. Medium inertia. Instantaneous peak torque (350% of rated torque). Mounted high resolution serial encoder: 13, 20 bit. Maximum speed: 6,000 rpm. Wide selection: 50W to 750W capacity, holding... [See More]
- Commutation: Sinusoidal
- Axes: 1.0
- Description: Speed Controller
- AC Input: 200
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Commutation: Sinusoidal; Trapezoidal
- Axes: 1.0
- Description: Speed Controller
- Motor / System: DC Brushed; DC Brushless
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Commutation: Sinusoidal; Trapezoidal
- Axes: 1.0
- Description: Speed Controller
- Motor / System: DC Brushed; DC Brushless
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Commutation: Sinusoidal; Trapezoidal
- Axes: 1.0
- Description: Speed Controller
- Motor / System: DC Brushed; DC Brushless
from Data Device Corporation (DDC)
High power H-Bridge brush-motor drive with internal drive circuitry. (PWR-82340)200 V (drain/source) breakdown voltage,(PWR-82342)500 V (drain/source) breakdown voltage, and 30 Amps continuous/50 Amps peak motor current. [See More]
- Commutation: Sinusoidal; Trapezoidal
- Drive Architecture: Digital
- Description: Regenerative; Pulse Width Modulation Drive; DSP (optional feature)
- Motor / System: DC Brushed; DC Brushless; DC Servo
from Parker Hannifin / Automation / Electromechanical Division - Europe
The Aries Controller combines the versatile and cost-effective Aries digital servo drive platform with the advanced control capabilities of the ACR servo controller into a single product, the Aries Controller single-axis drive-controller. Ethernet TCP communications. 3 power levels up to 6.3A... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog
- Description: Controller / Drive
- Axes: 1.0
from Kollmorgen Corporation
S300 Series digital brushless servo drives are compact, easy-to-use and extremely versatile. The small footprint saves space in the switchgear cabinet, and with its wide-ranging connectivity options the S300 may be the only drive family you need. These drives work with our best-in-class rotary servo... [See More]
- Commutation: Sinusoidal
- AC Input: 115 to 480
- Drive Architecture: Digital
- Phase : Three Phase
from Gefran
The line of SIEIDrive AXV300 modular drives is the result of the experience gained by Gefran in over 30 years of working in close partnership with the leading industrial automation manufacturers. Powering each “multi-axis ” system by means of “common DC bus ” ensures the... [See More]
- Commutation: Sinusoidal
- AC Input: 400
- Drive Architecture: Analog; Digital
- Phase : Three Phase
from PERFORMANCE CONTROLS, INC.®
The ACD Series of four-quadrant AC motor servo drives utilizes a high performance Digital Signal Processor (DSP), high efficiency MOSFETS, and proprietary control techniques to perform smooth, reliable motor control functions with a high degree of flexibility. Parameters are available to optimize... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Speed Controller
- Motor / System: AC Servo
from Galil
The CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port and up... [See More]
- Commutation: Sinusoidal; Trapezoidal
- Drive Architecture: Analog; Digital
- Description: PC-Based; Amplifier; Pulse Width Modulation Drive; MCU; Controller / Drive
- Axes: 1.0
from Delta Electronics (Americas)
To meet the demanding requirements of stand-alone or distributed motion control applications in industrial automation and satisfy the needs of high-precision positioning control requested by machine designers and system integrators, Delta launched the high performance motion control ASDA-A2 series... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Speed Controller; Amplifier; Regenerative; Pulse Width Modulation Drive; DSP; MCU; Controller / Drive
- Axes: 1.0
from Aerotech, Inc.
Design Features. Output power range from 50 A peak to 100 A peak at 320 VDC. No transformer required; direct connection to AC line. Capable of running brushless or single-phase DC brush motors. Velocity, torque, and dual-phase mode input command. Accepts both encoder or tachometer feedback for... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog
- Description: Amplifier; Variable Speed; Pulse Width Modulation Drive
- Axes: 1.0
from Data Device Corporation (DDC)
SPACE-Rated, 3-phase, 19 A, 400 V, radiation-tolerant motor drive with internal power supply (NASA SSQ-22691). [See More]
- Commutation: Sinusoidal; Trapezoidal
- Drive Architecture: Digital
- Description: Regenerative; Pulse Width Modulation Drive; DSP (optional feature)
- Motor / System: DC Servo
from Parker Hannifin / Automation / Electromechanical Division - Europe
Available in both 120/240 VAC and 480 VAC input versions. Current output from 2.5A RMS continuous to 155A RMS continuous. Available with ETHERNET Powerlink. Certified Category 3 Safety (EN954-1 Cat. 3). Programs in all five IEC61131-3 International programming standard. Scalable control technology:... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog
- Description: Regenerative; Controller / Drive
- Axes: 1.0
from PERFORMANCE CONTROLS, INC.®
The ACD 4000 is a fully digital servo amplifier designed for long life in extended temperature environments for applications such as RADAR, Power Generation, and other remote applications without environmental controls. The amplifier can control up to a 4000 Watt (5HP) BLDC servo motor in torque or... [See More]
- Commutation: Sinusoidal; Trapezoidal
- Drive Architecture: Digital
- Description: Speed Controller
- Motor / System: DC Servo
from Galil
The DMC-300xx Series is Galil's latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. The DMC-300xx is available as a compact card-level or box-level unit and connects to a stepper or servo motor amplifier of any power range. Or,... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog
- Description: Pulse Width Modulation Drive; Controller / Drive
- Axes: 1.0
from Delta Electronics (Americas)
Delta ’s ASDA-A2-E is an advanced AC Servo Drive with an EtherCAT communication Interface. EtherCAT is the fastest, most efficient and open, deterministic control network available in the market making it ideal for servo motion control. Complies with IEC standards to enable faster, real-time,... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Speed Controller; Amplifier; Regenerative; Pulse Width Modulation Drive; DSP; MCU; Controller / Drive
- Axes: 1.0
from Aerotech, Inc.
Design Features. Drive brush or brushless motors. Modular design. 10 or 20 A peak models. Self-commutation. Complete electrical isolation. Integrated or external power supply [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog
- Description: Amplifier; Variable Speed
- Axes: 1.0
from Data Device Corporation (DDC)
PW-82336. Radiation Tolerant Smart Power 3-Phase Motor Drive (PWR). The PW-82336 is a 3-phase Motor Drive hybrid that utilizes a rad-tolerant MOSFET output stage with 100 VDC rating to deliver 5 A continuous current to the motor. Packaged in a small case with internal logic for optimized... [See More]
- Commutation: Sinusoidal; Trapezoidal
- Drive Architecture: Digital
- Description: Speed Controller; Amplifier; Pulse Width Modulation Drive
- Motor / System: DC Brushless
from Parker Hannifin / Automation / Electromechanical Division - Europe
Up to 8 axes of servo or stepper control. 150 MFLOPS, 32-bit floating-point DSP. Advanced Multitasking of up to 24 simultaneous programs. Interpolation of 8 axes in any combination. Up to 10 encoder inputs at 20 MHz. 10/100 Base-T Ethernet. Supports EtherNet/IP protocol. USB2.0. Absolute Encoder... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog
- Description: Multi-Axis
- Axes: 2.0 to 8.0
from PERFORMANCE CONTROLS, INC.®
The DHT24-02 is a fully digital servo amplifier designed for long life in harsh environments (operates from -10 °C to 175 °C) for down-hole applications such as Directional Drilling, Horizontal Drilling, MWD, LWD, and Wireline. The amplifier can control a BLDC servo motor in torque or... [See More]
- Commutation: Sinusoidal; Trapezoidal
- Drive Architecture: Digital
- Description: Speed Controller
- Motor / System: DC Servo
from Delta Electronics (Americas)
To meet the requirements of general-purpose machine control and enhance our competitive advantage in the industrial automation market, Delta Electronics, Inc. introduces its high-performance and cost-effective ASDA-B2 series servo motor and drive systems. The series has a wide power range for its... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Speed Controller; Amplifier; Regenerative; Pulse Width Modulation Drive; DSP; MCU
- Axes: 1.0
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Pulse Width Modulation Drive; DSP; Controller / Drive
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Digital drive for brushless motors. [See More]
- Commutation: Sinusoidal
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: AC Servo
from PERFORMANCE CONTROLS, INC.®
Surgical hand tool manufacturers are constantly challenged to minimize motor generated heat in the tool while also minimizing the weight without sacrificing the power. PCI has joined the battle by partnering with OEMs and applying our knowledge of and techniques for precise control of PWM power to... [See More]
- Commutation: Sinusoidal; Trapezoidal
- Drive Architecture: Digital
- Description: Speed Controller
- Motor / System: DC Brushless; DC Servo
from Aerotech, Inc.
Design Features. Single-axis digital servo controller with integral power supply and amplifier. Advanced software architecture shortens customer development time; use C#, VB.Net, C, and LabVIEW?? combined with our full IDE and multitasking operating system. Host-mode operation allows you to send... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Pulse Width Modulation Drive; DSP; Controller / Drive
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Digital drive for brushless motors. [See More]
- Commutation: Sinusoidal
- Axes: 1.0
- Drive Architecture: Digital
- Motor / System: AC Servo
from Parker Hannifin / Automation / Electromechanical Division - Europe
Combines the powerful features of the 6K Controller with the Gemini GV digital servo drive for a complete stand-alone servo solution in one small package. Six powerful ranges for up to 11.8 kW of continuous power. Full ASCII communication capability. Control features such as registration,... [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog (optional feature); Digital (optional feature)
- Description: Controller / Drive
- Axes: 1.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Compact Digital Servo Drive. From 1.25Arms to 15Arms continuous current. 230 VAC, 1 and 3 phase operation. Internal braking resistor. Resolver and incremental encoder feedback. +-10V velocity and torque control, Step & direction input for position control, Current, torque and speed control. [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Multi-Axis
- Axes: 1.0 to 32.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
Compact Digital Servo Drive. From 1.25 A to 17 A continuous current. 230 VAC, 1 and 3 phase operation. Internal braking resistor. Configurable feedback. Current, torque and speed control. Positioner. Electronic shaft. Electronic cam. Internal PLC - programming according to IEC61131-3 (option). [See More]
- Commutation: Sinusoidal
- Drive Architecture: Digital
- Description: Multi-Axis
- Axes: 1.0 to 32.0
from Parker Hannifin / Automation / Electromechanical Division - Europe
1-8 axes of stepper/servo control (any combination). Outputs standard +/- 10V or step & direction. Servo update rates of 62.5 axis. Motion Planner Software provided 10 Mbps twisted pair Ethernet. TCP/IP and UDP protocol. 4-8 digital outputs [See More]
- Commutation: Sinusoidal
- Drive Architecture: Analog (optional feature); Digital (optional feature)
- Description: Multi-Axis; PC-Based; Controller / Drive
- Axes: 1.0 to 8.0