Metal / Metal Filled Marine Coatings
from Dampney Company, Inc.
Pheonxy Zinc Rich Primer [See More]
- Coating Material: Metal Filled; Resin; Zinc
- Cure / Setting Technology: Film Drying
- Type: Coating; Primer
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
COPPER BOTTOM ANTI-FOULING PAINT #45 is a semihard, anti-fouling developed for the shallow draft trade. It offers a moderately high concentration loading of cuprous oxide and a chemically modified binder that only slightly dissolves upon immersion service. RECOMMENDED USAGE. Used for moderate... [See More]
- Coating Material: Metal Filled; Cuprous Oxide
- Cure / Setting Technology: Film Drying
- Type: Paint
- Substrate: Aluminum; Steel; Wood; Other; Iron, Galvanized
from PPG Protective & Marine Coatings
Water-based inorganic zinc silicate PCP [See More]
- Coating Material: Metal Filled; Zinc; Water
- Substrate: Steel
- Type: Coating; Primer
- Thickness: 5.00E-4 to 7.00E-4
from Chase Products Co.
Cold Galvanizing 95 is a complete zinc metal spray which rustproofs any metal surface with thorough protection that lasts for years. It is equivalent to a hot galvanizing treatment as it fuses and adheres to all metal surfaces, stopping corrosion immediately. Zinc used in this product is 95% pure. [See More]
- Coating Material: Metal Filled; Zinc
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Operating Temperature: 400
from Aervoe Industries Incorporated
93% Zinc-rich coating bonds to iron and steel, USDA Category 21 acceptable [See More]
- Coating Material: Epoxy; Metal Filled; Resin; Zinc; Solvent
- Cure / Setting Technology: Film Drying
- Type: Coating
- Substrate: Metallic; Steel; Other; Pipes, TV Towers, Signs, Guard Rails
from Sherwin-Williams Protective & Marine Coatings
Epo-Phen ™ FF COATING is a flake filled (MIO) amine cured epoxyphenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures and for immersion service in water and hydrocarbons such as gasoline, fuel oil, and diesel fuel. [See More]
- Coating Material: Epoxy; Metal Filled; Formaldehyde Resins (Phenolic, Furan, Melamine); Resin; Micaceous Iron Oxide (MIO) Flake-Filled
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating
- Substrate: Concrete; Steel; Other; Iron, Stainless Steel
from PPG Protective & Marine Coatings
High Solids Epoxy Coating [See More]
- Coating Material: Inorganic (Silicate, Cement, Glaze); Metal Filled; Zinc
- Substrate: Steel
- Type: Coating; Primer
- Thickness: 0.0020 to 0.0040
from Sherwin-Williams Protective & Marine Coatings
EPOXY MASTIC ALUMINUM II is a high solids, aluminum filled, polyamine bisphenol A epoxy coating formulated to provide a high performance system over marginally prepared steel surfaces. Outstanding adhesion over marginally prepared surfaces. Chemical and moisture barrier. As a barrier or universal... [See More]
- Coating Material: Aluminum; Epoxy; Metal Filled; Resin; Polyamine Bisphenol-A
- Cure / Setting Technology: Thermoset
- Type: Coating; Primer; Clear Coat
- Substrate: Aluminum; Steel; Other; Iron, Galvanizing
from Sherwin-Williams Protective & Marine Coatings
INDUSTRIAL ALUMINUM PAINT is an economical, one-package, interior / exterior, general purpose, leafing aluminum paint which produces a chrome-like uniform appearance and provides heat resistance up to 400 °F. Ultraviolet light resistant. Long term protection against weathering and moisture. Heat... [See More]
- Coating Material: Alkyd; Aluminum; Metal Filled; Resin
- Cure / Setting Technology: Film Drying
- Type: Paint
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Sherwin-Williams Protective & Marine Coatings
Fast Clad ® Zinc HS is an inorganically reinforced zinc rich primer formulated to cathodically protect steel in various industrial and marine environments. Zinc dust is pre-wetted for easy incorporation and mixing. Reinforced film provides durable performance. Fast recoat time for improved... [See More]
- Coating Material: Metal Filled; Zinc; Inorganically Reinforced
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Primer
- Substrate: Concrete; Steel; Other; Iron
from Sherwin-Williams Protective & Marine Coatings
ZINC CLAD 4100 is a three-component, polyamide epoxy, zinc-rich coating. It is low VOC and contains 89.2% by weight of zinc dust pigment in its dried film. Meets Class B requirements for slip coefficient and creep resistance. Provides cathodic protection. Damaged film exhibits "self-healing"... [See More]
- Coating Material: Epoxy; Metal Filled; Resin; Zinc
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
Corothane ® I MIO-ALUMINUM is a single component, VOC compliant, moisture curing, aluminum and Micaceous Iron Oxide (MIO) filled, urethane primer, intermediate coating, or finish. It has excellent surface wetting properties and provides extended recoatability. Excellent adhesion to most... [See More]
- Coating Material: Aluminum; Metal Filled; Polyurethane; Resin; Aluminum & Micaceous Iron Oxide
- Cure / Setting Technology: Reactive or Moisture Cured; Thermoset
- Type: Coating; Primer; Clear Coat
- Substrate: Aluminum; Concrete; Plastic; Steel; Other; Iron, Galvanizing
from Sherwin-Williams Protective & Marine Coatings
Zinc Clad ® 200 is a three-component, polyamide epoxy, zincrich coating formulated to meet the SSPC Paint Spec 20. Meets the composition and performance requirements of SSPC Paint Spec 20. Light and moderate corrosive atmospheric exposure. Provides cathodic protection. Damaged film exhibits... [See More]
- Coating Material: Epoxy; Metal Filled; Resin; Zinc; Polyamide
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Primer
- Substrate: Metallic; Steel; Other; Iron