Weather / UV Resistant Marine Coatings
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Features: Weather Resistant; Chemical Resistant
- Cure / Setting Technology: Can Be Cured At Room or High Temperatures
- Type: Coating
- Substrate: Aluminum
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Features: Weather Resistant; Touch-Up
- Cure / Setting Technology: Film Drying
- Type: Paint; Clear Coat
- Substrate: Aluminum; Concrete; Metallic; Plastic; Steel; Wood; Other; Fiberglass
from Whitford Corporation
High temperature resistant; low coefficient of friction; abrasion/wear resistant; easy clean; dry film lubricant; thermoset; wide use temperature; anti-galling. [See More]
- Features: Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Heat Resistant
- Cure / Setting Technology: Film Drying
- Type: Coating
- Substrate: Ceramic; Metallic; Plastic; Wood
from Rhino Linings USA, Inc. / Industrial Division
Impact/abrasion/chemical/corrosion/rust & skid resistance, sound deadening. [See More]
- Features: Weather Resistant; Skid Resistant; Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Substrate: Metallic; Plastic; Wood; Other; Geotextile
from Heresite Protective Coatings, LLC
This family of thin film, air dry phenolics is excellent for resistance to corrosive fume atmospheres and is particularly good in marine and salt air environments. VR-514 coatings exhibit superior durability, excellent adhesion and good flexibility. Typical applications include Swimming Pools, Waste... [See More]
- Features: Abrasion, Erosion or Wear Resistant; Weather Resistant; Corrosion Resistant; Heat Resistant; Protective; Touch-Up
- Cure / Setting Technology: Film Drying
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
EnviroLastic ® PA POLYASPARTIC is a 100% solids, spray applied, aliphatic polyaspartic polyurea, which exhibits excellent color retention, gloss and UV stability. It can be applied at thicknesses of 8-12 mils in a single pass on horizontal surfaces or multiple passes on vertical surfaces. Rapid... [See More]
- Features: Weather Resistant; Low Odor, Seamless, Flexible; Chemical Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel
from Columbia Chemical Corporation
COLSID ® AP is a process for acid chloride zinc plating specially designed for mixed NH4Cl/KCl baths. COLSID AP contains a special ductilizer compound which insures extremely ductile, bright deposits. It produces little or no foam and can operate at high temperatures - over 125 °F/52 °C. [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Acid Chloride Zinc Plating
from Heresite Protective Coatings, LLC
Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective... [See More]
- Features: Waterproof; Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Thermoset
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
Epolon ™ II RUST INHIBITIVE EPOXY PRIMER is a high performance, exterior/interior, VOC compliant, lead and chromate free, high solids, two component, rust inhibitive, catalyzed polyamide epoxy steel primer. Specifically engineered for corrosion protection and chemical and weather resistant... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Primer
- Substrate: Steel; Other; Iron
from Columbia Chemical Corporation
EXTREME ® 110 is an economical process for plating brilliant, level, ductile zinc deposits in acid chloride zinc plating electrolytes using potassium chloride and boric acid (ammonia-free). EXTREME 110 additives promote superior bath solubility and higher temperature tolerance compared to... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Acid Chloride Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
Epolon ™ II MULTI-MIL EPOXY is a high performance, interior/ exterior, VOC compliant, high build, self-priming, two component, catalyzed polyamide epoxy. Dries to an extra tough, semi-gloss finish with maximum resistance to: alkali, abrasion, substrate corrosion, moisture, severe weather... [See More]
- Features: Weather Resistant; Alkali & Moisture Resistance; Chemical Resistant; Corrosion Resistant; Heat Resistant
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Self-Priming
- Substrate: Concrete; Steel; Other; Iron, Galvanizing
from Columbia Chemical Corporation
COLZINC ® ACF-II is a process for alkaline cyanide-free zinc plating that produces brilliantly bright, and extremely ductile deposits. Its excellent low current density covering and throwing power make it especially suitable for steel parts with deep recesses such as fittings, tubes, or computer... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Alkaline Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
Macropoxy ® 646-100 FAST CURE EPOXY is a high solids, less than 100 g/L VOC, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Thermoset
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Columbia Chemical Corporation
EXCEL ® 800 is cutting edge technology for producing acid chloride-like zinc deposit brightness from an alkaline cyanide-free zinc plating solution. Deposits are extremely ductile even at thickness over 25 microns (1 mil). EXCEL 800 is deal for both rack and barrel plating lines, and performs... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Alkaline Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
Fast Clad ® DTM URETHANE is a single coat, direct-to-metal urethane finish. It is a fast dry, polyaspartic urethane formulated to provide high build, high performance protection with excellent gloss and color retention through airless spray. Single coat application. Direct to metal. Corrosion... [See More]
- Features: Weather Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating
- Substrate: Aluminum; Metallic; Steel; Other; Iron, Galvanizing
from Columbia Chemical Corporation
COLCAD ® 100 is a brightener for cyanide cadmium plating for producing brilliant, ductile metal deposits over a wide current density range, and is suitable for both rack and barrel plating. COLCAD 100 is now the only Boeing approved cadmium brightener available for these applications. Under the... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Cadmium Plating
- Coating Material: Zinc; Cyanide Cadmium Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
HI-SOLIDS ALKYD METAL PRIMER is a fast drying, high solids, low VOC, rust inhibitive, alkyd primer for steel surfaces, and is free of heavy metal hazards. It is easy to apply by spray and has good resistance to general atmospheric weathering. It can be topcoated with alkyd and latex coatings. Fast... [See More]
- Features: Weather Resistant; Corrosion Resistant
- Cure / Setting Technology: Film Drying
- Type: Coating; Primer
- Substrate: Metallic; Steel; Other; Iron
from Columbia Chemical Corporation
MARQUEE ® ENVY MP is an ELV compliant, mid phosphorous, electroless nickel plating process. It contains no lead nor cadmium, and meets ASTM-B-733 and AMS2404 C specifications. Being a two component process, it is easy to use and has a 1:1 replenishment rate. It provides a deep, brilliant... [See More]
- Features: Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Substrate: Aluminum; Steel; Other; Brass
- Type: Coating; Electroless Nickel Deposit
- Coating Material: Electroless Nickel Plating Solution
from Sherwin-Williams Protective & Marine Coatings
HI-SOLIDS POLYURETHANE HS is a two-component, low VOC, aliphatic, acrylic polyurethane resin coating. It is designed for high performance protection with outstanding exterior gloss and color retention. Good/excellent resistance to corrosion and weathering. Outstanding color and gloss retention. [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Columbia Chemical Corporation
Lac-Chro-SEAL ® is a non-hazardous lacquer coating for enhanced corrosion resistance on electroplated deposits and base metals. It air dries quickly to a very thin, clear & glossy finish which prevents fingerprints and provides significant protection to high humidity conditions. [See More]
- Features: Weather Resistant; Corrosion Resistant; Protective
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat; Sealer; Lacquer
- Substrate: Metallic; Other; Zinc & Zinc Alloy Deposits Over Steel
from Sherwin-Williams Protective & Marine Coatings
Hi-Solids Polyurethane 250 is a two-component, aliphatic, acrylic polyurethane performance topcoat designed to provide good exterior gloss and color retention. It also exhibits good resistance to corrosion and weathering, along with chemical resistance. Recommended Usage. For use over prepared... [See More]
- Features: Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Steel
from Columbia Chemical Corporation
Zinc-Chro-SHIELD ® is a unique sealer for chromated zinc deposits which dramatically increases corrosion protection at very little additional cost. And since it's added to the final stagnant rinse at low concentrations (1% to 8% by volume), no additional equipment is required. Zinc-Chro-SHIELD... [See More]
- Features: Weather Resistant; Corrosion Resistant; Protective
- Cure / Setting Technology: Film Drying
- Type: Coating; Sealer
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel