Chemical / Oil Resistant Marine Coatings
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Features: Weather Resistant; Chemical Resistant
- Cure / Setting Technology: Can Be Cured At Room or High Temperatures
- Type: Coating
- Substrate: Aluminum
from Everlube Products
Ever-Slik 1201 is a thermally cured, specially blended epoxy based coating which provides outstanding corrosion resistance in almost any environment. Along with its excellent corrosion resistance, Ever-Slik 1201 is ideal for applications where an abrasion resistant coating is needed. Ever-Slik 1201... [See More]
- Features: Waterproof; Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Thermally Cured
- Type: Coating
- Substrate: Metallic; Steel
from Whitford Corporation
High temperature resistant; low coefficient of friction; abrasion/wear resistant; easy clean; dry film lubricant; thermoset; wide use temperature; anti-galling. [See More]
- Features: Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Heat Resistant
- Cure / Setting Technology: Film Drying
- Type: Coating
- Substrate: Ceramic; Metallic; Plastic; Wood
from Dampney Company, Inc.
Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides... [See More]
- Features: Waterproof; Chemical Resistant; Corrosion Resistant; Protective
- Cure / Setting Technology: Film Drying
- Type: Coating
- Substrate: Aluminum; Concrete; Metallic; Steel
from Heresite Protective Coatings, LLC
UC-5500 is formulated as a high gloss coating and as a top coat for other Heresite Coatings. It exhibits outstanding UV resistance with excellent weathering qualities, along with good flexibility and good abrasion resistance. This two component coating is typically sprayed on the exterior surfaces... [See More]
- Features: Waterproof; Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Features: Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Substrate: Concrete; Steel; Wood
from Rust-Oleum Corporation
Two component, high solid polyamide converted epoxy, refined coal tar pitch [See More]
- Features: Waterproof; Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic; Steel
from Rhino Linings USA, Inc. / Industrial Division
Impact/abrasion/chemical/corrosion/rust & skid resistance, sound deadening. [See More]
- Features: Weather Resistant; Skid Resistant; Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Substrate: Metallic; Plastic; Wood; Other; Geotextile
from Columbia Chemical Corporation
COLSID ® AP is a process for acid chloride zinc plating specially designed for mixed NH4Cl/KCl baths. COLSID AP contains a special ductilizer compound which insures extremely ductile, bright deposits. It produces little or no foam and can operate at high temperatures - over 125 °F/52 °C. [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Acid Chloride Zinc Plating
from Sauereisen, Inc.
Sauereisen ConoThane Glaze provides outstanding gloss and color retention along with excellent resistance to abrasion and chemicals, including solvents. This product matches the performance of baked finishes and may be used on properly prepared and primed substrates of nearly any composition. [See More]
- Features: Chemical Resistant; Protective
- Cure / Setting Technology: Multicomponent
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel
from Heresite Protective Coatings, LLC
Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became then, and still remains a standard in the industrial coatings industry. We provide the highest quality protective... [See More]
- Features: Waterproof; Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Thermoset
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®33 EPOXY PRIMER/SEALER is a low viscosity, 100% solids, high build, fast cure, epoxy primer designed for use under ArmorSeal ®650 or where a high build primer is needed. This primer/sealer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and... [See More]
- Features: Fast Dry, Low Odor; Chemical Resistant; Heat Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Primer; Sealer
- Substrate: Concrete; Wood
from Columbia Chemical Corporation
EXTREME ® 110 is an economical process for plating brilliant, level, ductile zinc deposits in acid chloride zinc plating electrolytes using potassium chloride and boric acid (ammonia-free). EXTREME 110 additives promote superior bath solubility and higher temperature tolerance compared to... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Acid Chloride Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Features: Humidity & Solvent Resistance; Chemical Resistant; Heat Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron
from Columbia Chemical Corporation
COLZINC ® ACF-II is a process for alkaline cyanide-free zinc plating that produces brilliantly bright, and extremely ductile deposits. Its excellent low current density covering and throwing power make it especially suitable for steel parts with deep recesses such as fittings, tubes, or computer... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Alkaline Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Features: Moisture & Yellowing Resistance; Chemical Resistant
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
from Columbia Chemical Corporation
EXCEL ® 800 is cutting edge technology for producing acid chloride-like zinc deposit brightness from an alkaline cyanide-free zinc plating solution. Deposits are extremely ductile even at thickness over 25 microns (1 mil). EXCEL 800 is deal for both rack and barrel plating lines, and performs... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Alkaline Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
ExpressCote ® 150 is an epoxy novolac coating engineered to protect concrete and steel tank interiors from chemicals and solvents at ambient and elevated temperatures. Designed for immersion, chemical exposure and high-temperature exposure, ExpressCote 150 is intended for a variety of aggressive... [See More]
- Features: Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Film Drying
- Type: Coating
- Substrate: Steel
from Columbia Chemical Corporation
COLCAD ® 100 is a brightener for cyanide cadmium plating for producing brilliant, ductile metal deposits over a wide current density range, and is suitable for both rack and barrel plating. COLCAD 100 is now the only Boeing approved cadmium brightener available for these applications. Under the... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Cadmium Plating
- Coating Material: Zinc; Cyanide Cadmium Zinc Plating
from Sherwin-Williams Protective & Marine Coatings
Corothane ® II is a 2-component, VOC compliant, aliphatic acrylic modified polyurethane designed for use in industrial environments. A chemical and abrasion resistant urethane enamel. A heavy duty maintenance coating for use in "high visibility areas. RECOMMENDED USAGE. Use over prepared... [See More]
- Features: Chemical Resistant; Corrosion Resistant; Heat Resistant
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Enamel
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
from Columbia Chemical Corporation
MARQUEE ® ENVY MP is an ELV compliant, mid phosphorous, electroless nickel plating process. It contains no lead nor cadmium, and meets ASTM-B-733 and AMS2404 C specifications. Being a two component process, it is easy to use and has a 1:1 replenishment rate. It provides a deep, brilliant... [See More]
- Features: Abrasion, Erosion or Wear Resistant; Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Substrate: Aluminum; Steel; Other; Brass
- Type: Coating; Electroless Nickel Deposit
- Coating Material: Electroless Nickel Plating Solution
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC COATING is a 100% acrylic, water reducible, corrosion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates. Chemical resistant. Corrosion resistant. Fast dry. Low odor. Flash rust/early... [See More]
- Features: Low Odor, Fast Dry, Low VOC; Chemical Resistant; Corrosion Resistant; Heat Resistant
- Cure / Setting Technology: Film Drying
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Wood; Other; Galvanizing, Drywall, Zinc Rich Primers
from Columbia Chemical Corporation
COLGLEAM ® Sn is a process for bright acid tin plating. Baths are maintained with only one brightener additive, eliminating the need to juggle and balance brighteners. The COLGLEAM Sn process is extremely simple to control, requiring only a fraction of the lab and analysis time needed by... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Aluminum; Steel
- Type: Coating; Tin Plating
- Coating Material: Acid Sulfate Tin Plating
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC PRIMER/FINISH is a 100% acrylic emulsion, waterborne, corrosion resistant coating for both new construction and industrial maintenance applications. It can be used as a primer under most water based topcoats or alone as a primer/topcoat system. It can be used directly over multipe... [See More]
- Features: Low Odor, Fast Dry, Low VOC; Chemical Resistant; Corrosion Resistant; Heat Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Primer; Clear Coat
- Substrate: Aluminum; Concrete; Steel; Other; Zinc Rich Primers, Galvanizing
from Columbia Chemical Corporation
COLLOY ® NI-Z-POSIT is a process for plating a zinc/nickel alloy from an alkaline cyanide-free zinc plating solution. The resulting alloy deposit which contains 10% to 15% nickel, is evenly distributed at low, mid and high current densities, and provides greatly enhanced corrosion resistance... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Protective
- Substrate: Steel
- Type: Coating; Zinc Nickel Plating
- Coating Material: Zinc; Alkaline Zinc Nickel
from Sherwin-Williams Protective & Marine Coatings
Epolon ™ II RUST INHIBITIVE EPOXY PRIMER is a high performance, exterior/interior, VOC compliant, lead and chromate free, high solids, two component, rust inhibitive, catalyzed polyamide epoxy steel primer. Specifically engineered for corrosion protection and chemical and weather resistant... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Primer
- Substrate: Steel; Other; Iron
from Sherwin-Williams Protective & Marine Coatings
Epolon ™ II MULTI-MIL EPOXY is a high performance, interior/ exterior, VOC compliant, high build, self-priming, two component, catalyzed polyamide epoxy. Dries to an extra tough, semi-gloss finish with maximum resistance to: alkali, abrasion, substrate corrosion, moisture, severe weather... [See More]
- Features: Weather Resistant; Alkali & Moisture Resistance; Chemical Resistant; Corrosion Resistant; Heat Resistant
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Self-Priming
- Substrate: Concrete; Steel; Other; Iron, Galvanizing
from Sherwin-Williams Protective & Marine Coatings
Macropoxy ® 646-100 FAST CURE EPOXY is a high solids, less than 100 g/L VOC, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate... [See More]
- Features: Weather Resistant; Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective
- Cure / Setting Technology: Thermoset
- Type: Coating
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing