Clear Coat / Top Coat Marine Coatings
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Type: Paint; Clear Coat
- Substrate: Aluminum; Concrete; Metallic; Plastic; Steel; Wood; Other; Fiberglass
- Cure / Setting Technology: Film Drying
- Coating Material: Epoxy; Resin
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Epoxy; Resin
from Rust-Oleum Corporation
Two component, high solid polyamide converted epoxy, refined coal tar pitch [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin
from Rhino Linings USA, Inc. / Industrial Division
Used for color stability and custom colors. [See More]
- Type: Coating; Clear Coat
- Substrate: Metallic; Plastic; Wood; Other; Polyurethane, Geotextile
- Cure / Setting Technology: Multicomponent
- Thickness: 0.0030 to 0.0050
from Heresite Protective Coatings, LLC
UC-5500 is formulated as a high gloss coating and as a top coat for other Heresite Coatings. It exhibits outstanding UV resistance with excellent weathering qualities, along with good flexibility and good abrasion resistance. This two component coating is typically sprayed on the exterior surfaces... [See More]
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin
- Substrate: Aluminum; Metallic; Steel
- Form: Aerosol (optional feature); Liquid
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
- Coating Material: Polyurethane; Resin; Aliphatic
from PPG Protective & Marine Coatings
High-performance tin-free antifouling with high level of cuprous oxide for long-life fouling protection [See More]
- Type: Coating; Clear Coat
- Features: Protective
from Columbia Chemical Corporation
Lac-Chro-SEAL ® is a non-hazardous lacquer coating for enhanced corrosion resistance on electroplated deposits and base metals. It air dries quickly to a very thin, clear & glossy finish which prevents fingerprints and provides significant protection to high humidity conditions. [See More]
- Type: Coating; Clear Coat; Sealer; Lacquer
- Substrate: Metallic; Other; Zinc & Zinc Alloy Deposits Over Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Zinc; Water
from Sauereisen, Inc.
Sauereisen ConoThane Glaze provides outstanding gloss and color retention along with excellent resistance to abrasion and chemicals, including solvents. This product matches the performance of baked finishes and may be used on properly prepared and primed substrates of nearly any composition. [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic
- Cure / Setting Technology: Multicomponent
- Coating Material: Acrylic; Polyurethane; Resin
from Sherwin-Williams Protective & Marine Coatings
EnviroLastic ® PA POLYASPARTIC is a 100% solids, spray applied, aliphatic polyaspartic polyurea, which exhibits excellent color retention, gloss and UV stability. It can be applied at thicknesses of 8-12 mils in a single pass on horizontal surfaces or multiple passes on vertical surfaces. Rapid... [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel
- Cure / Setting Technology: Multicomponent
- Coating Material: Resin; Aliphatic Polyaspartic Polyurea
from PPG Protective & Marine Coatings
High Solids Epoxy Coating [See More]
- Type: Coating; Clear Coat
- Coating Material: Epoxy; Resin
- Substrate: Concrete; Metallic; Steel
- Thickness: 0.0040 to 0.0080
from Sherwin-Williams Protective & Marine Coatings
Kem Kromik 150 is a high solids, high gloss, alkyd topcoat intended for interior and exterior applications in marine and industrial environments. Recommended Usage. Ships. Barges. Workboats. Fishing Boats. Offshore Vessels. Handrails/Appurtenances. Machinery & Equipment. Logo Equipment [See More]
- Type: Coating; Clear Coat
- Substrate: Aluminum; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC PRIMER/FINISH is a 100% acrylic emulsion, waterborne, corrosion resistant coating for both new construction and industrial maintenance applications. It can be used as a primer under most water based topcoats or alone as a primer/topcoat system. It can be used directly over multipe... [See More]
- Type: Coating; Primer; Clear Coat
- Substrate: Aluminum; Concrete; Steel; Other; Zinc Rich Primers, Galvanizing
- Cure / Setting Technology: Multicomponent
- Coating Material: Acrylic; Resin; Water
from Sherwin-Williams Protective & Marine Coatings
EPOXY MASTIC ALUMINUM II is a high solids, aluminum filled, polyamine bisphenol A epoxy coating formulated to provide a high performance system over marginally prepared steel surfaces. Outstanding adhesion over marginally prepared surfaces. Chemical and moisture barrier. As a barrier or universal... [See More]
- Type: Coating; Primer; Clear Coat
- Substrate: Aluminum; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Thermoset
- Coating Material: Aluminum; Epoxy; Metal Filled; Resin; Polyamine Bisphenol-A
from Sherwin-Williams Protective & Marine Coatings
INDUSTRIAL ENAMEL HS is a high solids, low VOC, alkyd, gloss topcoat. It is easy to apply by brush, roll, or spray and is intended for interior/exterior use in industrial environments. High gloss/dirt resistant. Chip and flake resistant. Abrasion resistant. Exterior/interior applications. Resists... [See More]
- Type: Coating; Enamel; Clear Coat
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood; Other; Iron, Galvanizing
- Cure / Setting Technology: Film Drying
- Coating Material: Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
Corothane ® I ALIPHATIC FINISH COAT is a single component, VOC compliant, moisture curing urethane designed for low temperature or high humidity applications while providing UV resistance and chemical resistance equivalent to two part urethane coatings. Low temperature application - down to 20... [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic; Steel; Other; Iron
- Cure / Setting Technology: Reactive or Moisture Cured; Thermoset
- Coating Material: Polyurethane; Resin