Ammonia (NH3) Gas Instruments
from MSA Safety
The General Monitors S5000 Gas Monitor is the ultimate gas detector for extreme environments needing to detect oxygen, toxic and combustible gases. It operates over a wide temperature range using a variety of gas sensing technologies. XCell ® gas sensors with TruCal ® technology extends... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 ppm, 0-1000 ppm); CO2 (0-2000, 0-5000, 0-10000, 0-30000, 0-50000 ppm); CO (0-100, 0-500, 0-1000 ppm); Cl2 (0-5, 0-10. 0-20 ppm); Hydrocarbons (0-100% LEL); H2 (0-1000 ppm); HCl (0-50ppm); H2S (0-10, 0-20, 0-50, 0-100, 0-500 ppm); Methane (CH4) / Natural Gas (0-100% LEL); NO (0-100ppm); NO2 (0-10 ppm); O2 (0-25 %); SO2 (0-25 ppm, 0-100 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; Semiconductor
from ABB Measurement & Analytics
The specialists for hazardous locations. The EL3060 series is compactly built and especially designed for hazardous areas. The gas analyzer is made up of the flameproof enclosed control unit which can also contain one analyzer. The infrared photometer is built into a separate flameproof enclosure... [See More]
- Gas Types: NH3 (0-30/500 ppm); CO2 (0-5/50 ppm); CO (0-10/50 ppm); Hydrocarbons (0-50/100/200/250/500 ppm); Methane (CH4) / Natural Gas (0-50/100 ppm); NO (0-75/150 ppm); NxOx (0-20/50 ppm); SO2 (0-25/100 ppm); SF6 (0-1900/2000 ppm); Water Vapor (0-500/1000 ppm)
- Mounting Type: Fixed
- Instrument Type: Monitor; Analyzer
- Sensor Technology: Infrared; PID
from Fuji Electric Corp. of America
Multigas analyser compact and light high performance multigas analyser. The ZSVS up to 4 gas components concentration measurement. Suited for gas monitoring in heat treatment furnaces, plant cultivation, and research-purpose chemical analysis. CO2 – CO – CH4 – O2 [See More]
- Gas Types: NH3 (50ppm); CO2 (15%); CO (1000ppm); Methane (CH4) / Natural Gas (1000ppm); NO (1000ppm); SO2 (1000ppm)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Infrared
from Arjay Engineering
The 4200-IR offers an intelligent solution to monitor for refrigerant leaks in machinery chiller rooms. The central panel offers full user interface, control setup and relay interlocks for ventilation control and gas leak alarms. Sleek remote alarm panels for outside the room and point of source... [See More]
- Gas Types: NH3; Refrigerants
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from United Electric Controls Company
The Vanguard WirelessHART, fixed point gas detector is designed to monitor gas emissions in areas with power and signal wire limitations. It significantly reduces engineering and deployment time and costs. A true wireless device with 5-year battery life and wireless HART communication, Vanguard... [See More]
- Gas Types: Toxic; Combustible; NH3 (0 - 100 ppm); CO (0 - 500 ppm); H2S (0 - 100 ppm); Methane (CH4) / Natural Gas (0 to 100% LEL) (Propane (C3H8) 0 to 100% LEL)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Electrochemical; Infrared
from Acme Engineering Products
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. . The... [See More]
- Gas Types: Combustible; NH3; CO2; CO; Hydrocarbons; H2; H2S; NO2; O2
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature)
from MSA Safety
MSA's TG5000 Gas Monitor provides a safe, reliable and effective solution for the detection of combustible and toxic gases and oxygen deficiency. The TG5000 includes a 95dB audible alarm with horn silence control, LED strobe, and a helpful Bluetooth® interface that connects with MSA's X/S Connect... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100, 0-1000 ppm); CO2 (0-2, 0-5% Vol); CO (0-100, 0-500 ppm); Cl2 (0-5, 0-10, 0-20 ppm); ClO2; Hydrocarbons (0-100% LEL); H2 (0-1000 ppm); HCl (0-50 ppm); HCN (0-50 ppm); HF (0-10 ppm); H2S (0-10, 0-50, 0-100 ppm); Methane (CH4) / Natural Gas (0-100% LEL); NO2 (0-10 ppm); O2 (0-25%); SO2 (0-25 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared
from ABB Measurement & Analytics
LGR's new Ammonia Analyzer - Trace (AAT) provides fast measurements of ammonia in ambient air with unparalleled precision, sensitivity and time response. No longer do you have to wait for minutes before getting a reliable reading – LGR ’s AAT provides measurements at 10 Hz with sub-ppb... [See More]
- Gas Types: NH3
- Mounting Type: Portable (optional feature)
- Instrument Type: Analyzer
- Sensor Technology: LGR’s Off-axis ICOS technology
from Arjay Engineering
The HLM 2000-TX gas transmitter is a 4-20 mA loop powered transmitter for monitoring toxic gases at ppm concentrations and oxygen levels in %. The sensing elements are gas selective electrochemical technology. The electronics are mounted directly at the sensor for ease of calibration and... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100ppm); CO (0-500ppm); Cl2 (0-10ppm); HCl (0-10ppm); H2S (0-100ppm); NO (0-100ppm); NO2 (0-20pm); O2 (0-30%); SO2 (0-50ppm)
- Mounting Type: Fixed
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Acme Engineering Products
The Pioneer Gen II is a budget conscious two gas combo detector that is configured and operated through a Bluetooth application. In its standard configuration, the Gen II combines integral CO/NO2 sensing elements. Installation is fast and simple given that all the connections are located within one... [See More]
- Gas Types: Toxic; Combustible; NH3; CO; Cl2; Hydrocarbons; H2; H2S; Methane (CH4) / Natural Gas; NO2; O2
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature)
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from MSA Safety
The ULTIMA ® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell ® gas sensors with TruCal ® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 ppm, 0-1000 ppm); CO2 (0-2%, 0-5% Vol); CO (0-100, 0-500, 0-1000 ppm); Cl2 (0-5, 0-10. 0-20 ppm); Hydrocarbons (0-100% LEL); H2 (0-1000 ppm); HCl (0-50ppm); H2S (0-10, 0-50, 0-100 ppm); Methane (CH4) / Natural Gas (0-100% LEL); NO (0-100ppm); NO2 (0-10 ppm); O2 (0-25%); SO2 (0-25 ppm, 0-100 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared
from ABB Measurement & Analytics
Los Gatos Research's (LGR's) Ammonia Analyzer provides sensitive measurements of ammonia in ambient air or in process flows containing ethylene with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time or rely on scrubbers to measure ammonia... [See More]
- Gas Types: NH3 (10 ppm in air); Water Vapor
- Mounting Type: Portable (optional feature)
- Instrument Type: Analyzer
- Sensor Technology: LGR’s Off-axis ICOS technology
from Arjay Engineering
The EC-Gold gas transmitter is part of the Arjay series of gas. detection instruments. This employs electro-. chemical sensors to target toxic gas or oxygen. concentrations in ambient air. The unique design. and flexible interface allows this transmitter to. be used with any of the Arjay controllers... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100ppm); CO (0-500ppm); Cl2 (0-10ppm); Refrigerants; H2S (0-100ppm); NO2 (0-20ppm); O2 (0-30%)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Number of Gases Monitored: Multi
from Acme Engineering Products
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple... [See More]
- Gas Types: Toxic; Combustible; NH3; CO; Cl2; Hydrocarbons; H2; H2S; Methane (CH4) / Natural Gas; NO2; O2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic
from RainWise, Inc.
Rainwise offers customized turnkey weather monitoring solution. [See More]
- Gas Types: Toxic (optional feature); Combustible (optional feature); NH3 (Contact Factory); AsH3 (Contact Factory); Br2 (Contact Factory); CO (Contact Factory); Cl2 (Contact Factory); ClO2 (Contact Factory); B2H6 (Contact Factory); F (Contact Factory); GeH4 (Contact Factory); H2 (Contact Factory); HCl (Contact Factory); HCN (Contact Factory); HF (Contact Factory); H2Se (Contact Factory); H2S (Contact Factory); NO (Contact Factory); NO2 (Contact Factory); O2 (Contact Factory); O3 (Contact Factory); PH3 (Contact Factory); SiH4 (Contact Factory); SO2 (Contact Factory)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Electrochemical
from Cubic Sensor and Instrument Co.,Ltd.
Laser raman gas analyze?r LRGA-6000 is an advanced equipment that can online measure all the gas composition of most fuel gases, including biogas, syngas, natural gas, producer gas and so on. And with the unique advantages of no consumables, higher accuracy, long lifetime, and no routine calibration... [See More]
- Gas Types: Combustible; NH3; CO2; CO; Hydrocarbons; H2; H2S (optional feature); Methane (CH4) / Natural Gas; O2; Water Vapor (optional feature)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Laser Raman
from Global Detection Systems Corp.
The GASMAX II single / dual channel Toxic / O2 / LEL gas monitor delivers the latest gas detection technology, reliability and ease of use. Available in both single and dual channel models, the GASMAX II is CSA certified for use in Div 1 & Div 2 explosion proof installations. [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 ppm); AsH3 (0-1 ppm); CO (0-300/1000 ppm); Cl2 (0-5/50 ppm); ClO2 (0-1 ppm); F (0-1 ppm); H2 (0-2000 ppm); HCl (0-30 ppm); HCN (0-50 ppm); HF (0-10 ppm); H2S (0-50/100 ppm); NO (0-100/500 ppm); NO2 (0-5/50 ppm); O2 (0-25%); O3 (0-1 ppm); SiH4 (0-50 ppm); SO2 (0-20/100 ppm) (COCI2 0-1ppm N2H4 0-1ppm TBM 0-14ppm)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic (optional feature); Infrared (optional feature); Semiconductor (optional feature)
from Bacharach, Inc.
Infrared, electrochemical and MOS sensor options. Detects CFC, HCFC, HFC, refrigerants, oxygen, toxic and combustible gases. Selectable current or volt analog output. IP66 housing options, including remote and duct mount sensors. Built-in relay with adjustable set-point. The MGS-150 Gas Detector can... [See More]
- Gas Types: NH3; CO2; Refrigerants
- Sensor Technology: Electrochemical; Infrared; Semiconductor
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Conspec Controls Inc.
CONSPEC's CN Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CN Series is a simple and "smart" gas detector. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for... [See More]
- Gas Types: Toxic; NH3
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from Senscient Inc.
Reliable, open path detection of ammonia at levels low enough to provide early warning for leakage of this highly toxic gas. Detection Limits for ammonia leak detection are orders of magnitude lower than any other OPGD product. Specific detection of Ammonia without any cross interference from any... [See More]
- Gas Types: Combustible; NH3 (0-1000ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Infrared; Enhanced Laser Diode Spectroscopy
from LumaSense Technologies, Inc., An Advanced Energy Company
The Automotive Emissions Monitor - 3433i is a highly accurate and reliable Multi Gas Monitor based on the INNOVA 1314 platform with special configuration for Exhaust Gas or SHED Evaporative Testing. Its measurement principle is based on the photoacoustic detection method. In addition to its high... [See More]
- Gas Types: Toxic; NH3 (0.2 ppm); CO2 (5 ppm); CO (0.2 ppm); Refrigerants (0.01 ppm); Hydrocarbons (0.08 - 0.4 ppm); NxOx (N2O: 0.03 ppm)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Infrared
from COSA Xentaur Corporation
The ZSS is a Highly Efficient Ammonia (NH3), Hydrochloric Acid (HCl), Moisture, Oxygen (O2), Carbon Monoxide (CO), Carbon Dioxide (CO2) and Methane (CH4) Optical Gas Analyzer For Stack Gas Applications. COSA ZSS. The ZSS uses a non-dispersive infrared absorbance system which is made up by an... [See More]
- Gas Types: NH3 (0 - 15 ppm/min); HCl (0 - 10 ppm/min)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Infrared
from Honeywell Analytics, Inc.
The Sensepoint XCD transmitter provides comprehensive monitoring of combustible, toxic and Oxygen gas hazards in potentially explosive atmospheres, indoors and outdoors —and is marked by installation ease and flexibility, user-friendly operation and cost-effective gas monitoring. Sensepoint... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-50PPM); CO (0-200 PPM / 0-500 PPM); Cl2 (0-5 PPM / 0-15 PPM); Hydrocarbons (0-100% LEL); H2 (0-1000 PPM); H2S (0-50 PPM / 0-100 PPM / 0-20 PPM); NO2 (0-10 PPM); O2 (0-25% VOL); SO2 (0-15 PPM / 0-50 PPM)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical
from Axetris AG
The LGD F200 instrument series is based on a contact-less, near-infrared absorption measurement of the target gas. The systems are self-contained, ready-to-use OEMmodules, using a flow-through cell set-up for extractive measurements. The slightly bigger LGD F200 (H) version features optional cell... [See More]
- Gas Types: Toxic; NH3 ((0 to 100 ppm)); Water Vapor ((0 to 2, 5, 10 20, or 30 % absolute))
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Tunable Diode Laser Spectrometer
from Emerson Automation Solutions – Rosemount
The M2B single channel universal transmitter is designed for the most demanding, industrial applications that require a local, full-featured transmitter interface but do not require a character display. The Millennium II BASIC includes bright LED indicators for Power/Alarm/Fault conditions with an... [See More]
- Gas Types: Toxic; Combustible; NH3; H2S; O2
- Sensor Technology: Catalytic; Electrochemical; Infrared; Semiconductor
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
from Pyott-Boone Electronics (PBE Group)
The Model 2200, when used with the Model BBS/II Power Supply with Battery Backup, is a stand-alone, environmental gas monitor capable of measuring four different gas types in a simple package. Available sensor types are: Carbon Monoxide, Oxygen, Methane (combustible gases), Nitric Oxide, Nitrogen... [See More]
- Gas Types: Combustible; NH3; CO; Cl2; Hydrocarbons ((CH4) ( (All combustible gases)); H2; H2S; NO; NO2; O3; SO2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Application: Confined Space Entry
from REED-Direct
Low power semi-conductor sensor. Includes soft carrying case and batteries. SPECIFICATIONS: Sensitivity: 50 ppm methane. Warm-up Time: Approx. 5 minutes. Response Time: < 2 seconds. Alarm Limit: At 10% LEL for methane. Power Supply: 3 x "C" batteries. Battery Life: 8 hours of continuous use. [See More]
- Gas Types: Combustible; NH3; CO; Hydrocarbons (50 ppm, 10% LEL); H2S; Water Vapor (Industrial Solvents, Lacquer Thinner)
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Sensor Technology: Semiconductor
from Linde North America, Inc.
The Series 6400 Gas Detector warns users of hazardous chemicals detected in the atmosphere. When incorporated with an emergency shutdown system, the Series 6400 Gas Detector can turn off the supply of hazardous gas immediately after a leak is detected. The Series 6400 Gas Detector is a simple to... [See More]
- Gas Types: Toxic; NH3 (0-100 ppm, 0-50 ppm, 0-500 ppm); AsH3 (0-1000 ppb, 0-1000 ppb, 0-10 ppm); Br2 (0-2 ppm, 0-1 ppm, 0-10 ppm); CO (0-100 ppm, 0-50 ppm, 0-500 ppm); Cl2 (0-10 ppm, 0-1 ppm, 0-50 ppm); ClO2 (0-2 ppm, 0-1 ppm, 0-10 ppm); B2H6 (0-1000 ppb, 0-1000 ppm, 0-10 ppm); F (0-2 ppm, 0-1 ppm, 0-10 ppm); GeH4 (0-1000 ppb, 0-1000 ppb, 0-10 ppm); H2 (0-4%, 0-2000 ppm, 0-10%); HCl (0-20 ppm, 0-10 ppm, 0-100 ppm); HCN (0-20 ppm, 0-10 ppm, 0-100 ppm); HF (0-10 ppm, 0-10 ppm, 0-100 ppm); H2Se (0-1000 ppb, 0-1000 ppb, 0-10 ppm); H2S (0-50 ppm, 0-10 ppm, 0-100 ppm); NO (0-100 ppm, 0-50 ppm, 0-500 ppm); NO2 (0-20 ppm, 0-5 ppm, 0-100 ppm); O2 (0-25%, 0-10%, 0-100 %); O3 (0-2 ppm, 0-1 ppm, 0-10 ppm); PH3 (0-1000 ppb,0-1000 ppb, 0-10 ppm); SiH4 (0-20 ppm, 0-1000 ppb, 0-100 ppm); SO2 (0-20 ppm, 0-10 ppm, 0-100 pp) (Phosphine: 0-1000 ppb, 0-1000 ppb, 0-10 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector
- Number of Gases Monitored: Single; Multi
from Siemens Analytical Products
For continuous measurement of hydrogen and noble gases, the thermal conductivity of the sample gas mixture is measured and used to calculate the concentration. Only binary gas mixtures can be measured directly. If more than two components are present, the concentration of all other constituents must... [See More]
- Gas Types: NH3 (0 to 30%); CO2 (0 to 100%); H2 (0 to 100%); Methane (CH4) / Natural Gas (0 to 100%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Semiconductor
from ENMET Corporation
P/N 04810-2400, Spectrum Series Personal Gas Detector for Ammonia, NH3. The SPECTRUM Series portable gas detector is a compact, durable and microprocessor-based personal monitor. This instrument is designed for a variety of applications including use by firefighters, inspectors, emergency service... [See More]
- Gas Types: NH3
- Sensor Technology: Electrochemical
- Instrument Type: Detector
- Display: Digital
from FIS Inc.
Sensor Gas Chromatograph (SGC) uses a highly sensitive semiconductor gas sensor as a gas detector. The original built-in column is small, enabling the sample gases to be very sensitive and quick separation. [See More]
- Gas Types: NH3 (50ppb-100ppm) (Trimethylamine: 50ppb-100ppm)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Semiconductor
from Siemens Process Instrumentation
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications. One or two signals from up to three measuring points are processed simultaneously by the central analyzer unit. The sensors are designed for... [See More]
- Gas Types: Toxic; Combustible; NH3; CO2; CO; HCl; HF; O2; Water Vapor
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Application: Process Gas
from MIDAC Corporation
The MIDAC V-Series is designed to detect lower moisture levels than ever before...so you can raise your standards for purity higher than ever before! It's true, MIDAC's V-Series Moisture Analyzers provide unprecedented capability for detecting moisture and other impurities in corrosive gases. [See More]
- Gas Types: Aerosols; NH3; AsH3; CO2; CO; ClO2; B2H6; F; GeH4; Refrigerants; Hydrocarbons; HCl; HCN; HF; H2Se; H2S; Hg; NO; NO2; NxOx; O3; PH3; SiH4; SO2; Water Vapor (10ppb, 1.0ppb in HCl) (Formaldehydes, Xylenes)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Infrared; FTIR
from Compur Monitors, Inc.
You always know what is going on in your plant: Gas detection system Statox 505 compliant to SIL 2 Standard. Intelligent Gas Sensors for AsH3, Cl2, ClO2, CO, COCl2, H2, H2S, HCl, HCN, HF, N2H4, NH3, NO2, O2, O3, PH3 and SO2. The Statox 505 new 4 â €" 20 mA Transmitter for toxic gases and... [See More]
- Gas Types: NH3 (0-150 ppm); CO (0-300 ppm); Cl2 (0-5 ppm); ClO2 (0-1 ppm); Hydrocarbons (0-0,5/1,0/100 ppm); H2 (0-300 ppm); HCl (0-50 ppm); HCN (0-20/100 ppm); HF (0 - 10 ppm); NO2 (0-5 ppm); O2 (0-35 %); PH3 (0-1 ppm) (Sulfur Dioxide: 0-20/100 ppm)
- Application: Confined Space Entry
- Mounting Type: Fixed
- Display: Digital
from Industrial Scientific Corporation
The Radius® BZ1 Area Monitor is a rugged gas detector that connects your entire worksite. Designed to go where the work is, Radius can be deployed in seconds for emergency response scenarios or left in the field for up to 7 days on a single charge or for an unlimited period with the Solar Power... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-500ppm); CO2 (0-5%); CO (0 - 1500ppm); Cl2 (0-50ppm); Hydrocarbons (Methane, pentane 0-100% LEL;Methane 0-5%); H2; H2S (0-500 ppm); Methane (CH4) / Natural Gas (Methane, pentane 0-100% LEL;Methane 0-5%); NO2 (0-150 ppm); O2 (0-30% Volume); SO2 (0 - 150 ppm)
- Mounting Type: Portable
- Instrument Type: Monitor
- Sensor Technology: Electrochemical
from Bacharach, Inc.
Detects leaks that other instruments can ’t. 1ppm Minimum Detectable Level for refrigerants – the lowest MDL in the industry. High-performance detection of halogenated refrigerants, CO2 and NH3. Identify leaks early to mitigate refrigerant loss, protect produce, enhance energy... [See More]
- Gas Types: NH3 (25 to 10,000 ppm); CO2 (300 to 8,000 ppm); Refrigerants (0 to 10,000 ppm)
- Sensor Technology: Infrared; Proprietary Non-dispersive Infrared (NDIR) Technology
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Conspec Controls Inc.
CONSPEC's CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and "smart" gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS... [See More]
- Gas Types: Toxic; NH3
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from Honeywell Analytics, Inc.
Highest performance fixed flammable and toxic gas detector with a choice of communication outputs, accessories and installation flexibility. Apex takes the best elements of gas detection design and combining them into one unit. Apex provides the highest performance, installation flexibility, a wide... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-50 PPM / 0-1000 PPM); AsH3 (0-0.2 PPM); Br2 (0-0.4 PPM); CO (0-100 PPM / 0-500 PPM); Cl2 (0-2 PPM / 0-15 PPM); ClO2 (0-0.4 PPM); B2H6 (0-0.4 PPM); F (0-4 PPM); GeH4 (0-0.8 PPM); Hydrocarbons (0-100% LEL); H2 (0-1000 PPM); HCl (0-20 PPM); HCN (0-20 PPM); HF (0-12 PPM); H2S (0-15 PPM / 0-100 PPM); NO (0-100 PPM); NO2 (0-12 PPM); O2 (0-21 % v/v); O3 (0-4 PPM); PH3 (0-1.2 PPM); SiH4 (0-20 PPM); SO2 (0-8 PPM / 0-50 PPM) (Many other toxic gases- see datasheet)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical
from Axetris AG
The LGD F200 instrument series is based on a contact-less, near-infrared absorption measurement of the target gas. The systems are self-contained, ready-to-use OEM modules, using a flow-through cell set-up forextractive measurements. [See More]
- Gas Types: Toxic; NH3 ((0 to 300 ppm)); Water Vapor ((0 to 2, 5, 10 20, or 30 % absolute))
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Tunable Diode Laser Spectrometer
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-300 ppm, 0-30%); CO2 (0-10 ppm, 0-100%); CO (0-10 ppm, 0-100%); Methane (CH4) / Natural Gas (0-500 ppm, 0-100%); NO (0-250 ppm, 0-100%); NxOx (0-2000 ppm); O2 (0-100%); SO2 (0-130 ppm, 0-80%); SF6 (0-20 ppm, 0-2%); Water Vapor (0-1000 ppm, 0-3%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
from Linde North America, Inc.
G-TECTA ™ SG is a fully functional premium single gas instrument, water and dust resistant, with one button operation and a choice of 28 sensors to suit almost every application. The lightweight and robust design combined with full download and data logging capability offers the ideal single... [See More]
- Gas Types: Toxic; Combustible; NH3; CO2; CO; Cl2; ClO2; Hydrocarbons; H2; HCN; HF; H2S; Methane (CH4) / Natural Gas; NO; NO2; O3; PH3; SO2
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Number of Gases Monitored: Single
from Siemens Analytical Products
The "Combi-Analyzer" ULTRAMAT/OXYMAT 6 combines the features of the ULTRAMAT 6 and OXYMAT 6 in one analyzer in a 19" rack design. Most frequently used for demanding applications, the ULTRAMAT 6 must meet high standards with regard to reliability and measuring quality. This is guaranteed by modern... [See More]
- Gas Types: NH3; CO2; CO; Methane (CH4) / Natural Gas; NO; SO2
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Infrared
from MIDAC Corporation
The Titan-OL is a turnkey, process-ready gas analysis system. The analyzer and sample handling hardware can be wall or frame mounted in a NEMA enclosure suitable for use in production environments, including Class I, Div. 1. The integrated sampling system is fully purgeable and can handle multiple... [See More]
- Gas Types: Aerosols; NH3; AsH3; CO2; CO; ClO2; B2H6; F; GeH4; Refrigerants; Hydrocarbons; HCl; HCN; HF; H2Se; H2S; Hg; NO; NO2; NxOx; O3; PH3; SiH4; SO2 (Formaldehydes, Xylenes)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Infrared; FTIR
from Bacharach, Inc.
Infrared or semiconductor sensor options. System solution for 1, 2, 4 or 6 sensors. Detects refrigerants, CFC, HCFC, HFC, Ammonia, Carbon Dioxide and combustible gases. IP66 housing options, including remote and duct mount sensors. Built-in relay for 1 or 2 pre-set alarm levels. The MGD-100 is an... [See More]
- Gas Types: NH3; CO2; Refrigerants
- Sensor Technology: Infrared; Semiconductor
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Conspec Controls Inc.
CONSPEC Controls Multi-Channel Controller is a microprocessor-based multi-analog input controller. The P2259/60 was designed to be an independent stand-alone controller but can integrate into any type of data acquisition system. The Controller can provide up to eight channels of remote monitoring... [See More]
- Gas Types: Combustible; Aerosols; NH3; AsH3; Br2; CO2; CO; Cl2; ClO2; B2H6; F; GeH4; Refrigerants; Hydrocarbons; H2; HCl; HCN; HF; H2Se; H2S; NO; NO2; O2; O3; PH3; SiH4; SO2; SF6
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from Honeywell Analytics, Inc.
Remotely monitor toxic gases in Class 1, Div 2 areas while reducing the maintenance, training and overall cost of gas monitoring. Sensepoint XCD RTD from Honeywell Analytics makes it easy on your maintenance team, time and budget when faced with the challenge of monitoring toxic gases in Class I,... [See More]
- Gas Types: Toxic; NH3 (0-50 PPM); CO (0-200 PPM); Cl2 (0-5 PPM); H2S (0-50 PPM); NO (0-100 PPM); NO2 (0-10 PPM); O2 (0-25%); SO2 (0-15 PPM)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from Emerson Automation Solutions – Rosemount
Derived from the X-STREAM process gas analyzer, the X-STREAM Enhanced analyzer leads the industry in analytical capabilities and takes process gas analysis to the next level. Offering enhanced performance, extended communication capabilities, and maximum ease of use, the X-STREAM Enhanced offers... [See More]
- Gas Types: Toxic; NH3 (0-200 ppm, 0-100%); CO2 (0-100 ppm, 0-100%); CO (0-100 ppm, 0-100%); Cl2 (0-600 ppm, 0-100%); Hydrocarbons; H2 (0-100%); H2S (0-100%); Methane (CH4) / Natural Gas (0-200 ppm, 0-100%); NxOx (0-500 ppm, 0-100%); O2 (0-100%); SO2 (0-200 ppm, 0-100%); SF6 (0-50 ppm, 0-100%); Water Vapor (0-3000 ppm, 0-8%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity, Moisture Sensors
from Linde North America, Inc.
G-TECTA ™ 4GP is an extremely robust 4 gas instrument with built in pump and charger. The single button operation and full data management allows the users to effectively manage their gas detection requirements with confidence. G-TECTA 4GP has infrared communication, full functional capability... [See More]
- Gas Types: Toxic; Combustible; NH3; CO; Cl2; H2; HCN; HF; H2S; Methane (CH4) / Natural Gas; NO; NO2; O2; O3; PH3; SO2
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Siemens Analytical Products
The basic design of the diode laser gas analyzer LDS 6 enables further opportunities in process gas analytics and continuous emission monitoring. The major part of the benefits the in-situ approach is introducing belongs to the simple fact that the measurement is performed non-intrusively and in... [See More]
- Gas Types: Toxic; NH3 (0 to 500 ppm); CO2 (0 to 100%); CO (0 to 100 %); HCl (0 to 6000 ppm); HF (0 to 200 ppm); O2 (0 to 100%)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Single-line Molecular Absorption Spectroscopy