Combustible Gas Gas Instruments
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Gas Types: Combustible; CO2; Hydrocarbons; H2; Methane (CH4) / Natural Gas; O2; SO2
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Number of Gases Monitored: Multi
from PCE Instruments / PCE Americas Inc.
The airborne particle-counting hygiene meter PCE-RCM 12 is used for indicative testing of environmental parameters. The airborne particle-counting hygiene meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the airborne... [See More]
- Gas Types: Toxic; Combustible; CO2 (0 ... 9999 ppm); Water Vapor (0 ... 100 % r.H.) (Formaldehyde (HCHO))
- Display: Digital
- Instrument Type: Detector
- Operating Temperature: 32 to 122
from MSA Safety
The 9010/9020 SIL controller comes with advanced design and innovative features. Monitoring up to 20 channels, it ’s now also SIL 2 suitable. The 9010 controller operates with one independent sensor, while the 9020 operates with two independent sensors per control module. Each module comes... [See More]
- Gas Types: Toxic; Combustible
- Mounting Type: Fixed
- Instrument Type: Detector
- Measurement Type: %LEL or %LFL; Trace
from Safeguard Analytics
Model SA-220 is an advanced single or dual gas detection transmitter designed for use with Safeguard Analytics ’ complete range of Model SA2 “smart sensor modules ”. A diffusion-based detector, with the gas type and sensitivity range determined by installing an application-specific... [See More]
- Gas Types: Toxic; Combustible (Oxygen Deficiency, VOCs, Refrigerants)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Diffusion
from Control Instruments Corp.
Control Instruments' CalorVal BTU Analyzer is a micro-combustion calorimeter. Because of its unique construction and operating technology, it is the optimum analyzer for directly measuring the total heating value of varying waste gas streams of industrial processes. Continuous & Direct measure... [See More]
- Gas Types: Combustible; Hydrocarbons (0-1300 BTU/ft³)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor; Analyzer
- Sensor Technology: Micro-combustion calorimeter
from Arjay Engineering
The HLM 2000-TX gas transmitter is a 4-20 mA loop powered transmitter for monitoring toxic gases at ppm concentrations and oxygen levels in %. The sensing elements are gas selective electrochemical technology. The electronics are mounted directly at the sensor for ease of calibration and... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100ppm); CO (0-500ppm); Cl2 (0-10ppm); HCl (0-10ppm); H2S (0-100ppm); NO (0-100ppm); NO2 (0-20pm); O2 (0-30%); SO2 (0-50ppm)
- Mounting Type: Fixed
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from ABB Measurement & Analytics
The H2 purity and purge gas monitor AK100 provides a complete system for monitoring hydrogen purity during normal operation and purge gas monitoring during commissioning and decommissioning of the generator. [See More]
- Gas Types: Toxic; Combustible (0); H2 (0 to 100% in CO2) (Air)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Thermal Conductivity
from DOD Technologies Inc.
The cGas Detector IR Refrigerant provides continuous monitoring of a wide range of refrigerant gases commonly used in commercial refrigeration systems. Dual beam, non-dispersive infrared sensor technology overcomes the limitations of solid state refrigerant sensors, accurately detects refrigerant... [See More]
- Gas Types: Combustible
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Infrared; Infrared
from CO2Meter.com
The Ammonia NH3 Combustible Fixed Gas Detector (PX2-1-2-E1125-A-01) is designed for continuous monitoring of ammonia toxic gases between 0-100ppm and vapors in hazardous areas of zones 1 and 2. This detector is an explosion-proof fixed NH3 gas detector, which measures between 0 - 100ppm. The... [See More]
- Gas Types: Combustible (Combustible Fixed Gas Detectors - Ammonia (NH3) Combustible Fixed Gas Detector (0-100ppm))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Acme Engineering Products
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication network. [See More]
- Gas Types: Toxic; Combustible; CO2 (optional feature); CO (optional feature); Cl2 (optional feature); Hydrocarbons (optional feature); H2 (optional feature); H2S (optional feature); Methane (CH4) / Natural Gas (optional feature); NO2 (optional feature); O2 (optional feature); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature)
from United Electric Controls Company
The Vanguard WirelessHART, fixed point gas detector is designed to monitor gas emissions in areas with power and signal wire limitations. It significantly reduces engineering and deployment time and costs. A true wireless device with 5-year battery life and wireless HART communication, Vanguard... [See More]
- Gas Types: Toxic; Combustible; NH3 (0 - 100 ppm); CO (0 - 500 ppm); H2S (0 - 100 ppm); Methane (CH4) / Natural Gas (0 to 100% LEL) (Propane (C3H8) 0 to 100% LEL)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Electrochemical; Infrared
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Gas Types: Combustible; Cl2; HCl; O2 (0 to 25vol%); SO2 (Zirconium Oxygen)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Infrared (optional feature)
from PCE Instruments / PCE Americas Inc.
Particle counter PCE-RCM 11. Air Quality Monitor for Indicative Measurement of Environmental Conditions / Determination of HCHO, particulate matter (PM2.5 / PM10) / Temperature and relative humidity / 3 " TFT LCD display The air quality monitor PCE-RCM 11 serves the indicative examination of... [See More]
- Gas Types: Toxic; Combustible; Water Vapor (0 ... 100% rh) (Formaldehyde (HCHO))
- Display: Digital
- Instrument Type: Detector
- Operating Temperature: 32 to 122
from MSA Safety
The General Monitors S5000 Gas Monitor is the ultimate gas detector for extreme environments needing to detect oxygen, toxic and combustible gases. It operates over a wide temperature range using a variety of gas sensing technologies. XCell ® gas sensors with TruCal ® technology extends... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 ppm, 0-1000 ppm); CO2 (0-2000, 0-5000, 0-10000, 0-30000, 0-50000 ppm); CO (0-100, 0-500, 0-1000 ppm); Cl2 (0-5, 0-10. 0-20 ppm); Hydrocarbons (0-100% LEL); H2 (0-1000 ppm); HCl (0-50ppm); H2S (0-10, 0-20, 0-50, 0-100, 0-500 ppm); Methane (CH4) / Natural Gas (0-100% LEL); NO (0-100ppm); NO2 (0-10 ppm); O2 (0-25 %); SO2 (0-25 ppm, 0-100 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; Semiconductor
from Safeguard Analytics
Model SA-2ES aspirated detection systems are designed for monitoring a wide range of gases in ambient air. System capacity is 1-2 Smart Sensors. Gas type and range of sensitivity are determined by installing user-specified sensors. An internal pump draws air and gas samples from a remote detection... [See More]
- Gas Types: Toxic; Combustible (Oxygen Deficiency, VOCs, Refrigerants)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Aspirated
from Control Instruments Corp.
For flammable gas monitoring in relatively clean, low temperature, low concentration applications. It ’s suitable for single or select solvent ranges and can also be used for mixtures of solvents in processes where normal solvent concentrations are below 25% LFL. Built on proven industrial... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LFL); Methane (CH4) / Natural Gas (0-100% LFL)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor; Analyzer
- Sensor Technology: Infrared
from Arjay Engineering
The EC-Gold gas transmitter is part of the Arjay series of gas. detection instruments. This employs electro-. chemical sensors to target toxic gas or oxygen. concentrations in ambient air. The unique design. and flexible interface allows this transmitter to. be used with any of the Arjay controllers... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100ppm); CO (0-500ppm); Cl2 (0-10ppm); Refrigerants; H2S (0-100ppm); NO2 (0-20ppm); O2 (0-30%)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Number of Gases Monitored: Multi
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. [See More]
- Gas Types: Combustible; O2
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Zirconia
from DOD Technologies Inc.
The cGas Detector is a digital, one or two channel gas detection transmitter that offers greater flexibility at a lower cost with customized sensor combinations and specialized options for adding only the functionality you need. It is ideal for monitoring toxic, combustible and refrigerant gases in... [See More]
- Gas Types: Combustible
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Electrochemical; Electrochemical
from CO2Meter.com
The Carbon Dioxide (CO2) Combustible Fixed Gas Detector (PX2-1-2-I464-C-01) is designed for continuous monitoring of CO2 gases between 0-5000ppm and vapors in hazardous areas of zones 1 and 2. This detector is an explosion-proof fixed CO2 gas detector, based with a 4-20 mA / RS485 Modbus output... [See More]
- Gas Types: Combustible; CO2 (Combustible Fixed Gas Detectors - Carbon Dioxide (CO2) Combustible Fixed Gas Detector (0-5000ppm))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Acme Engineering Products
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. . The... [See More]
- Gas Types: Combustible; NH3; CO2; CO; Hydrocarbons; H2; H2S; NO2; O2
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature)
from MSA Safety
MSA's TG5000 Gas Monitor provides a safe, reliable and effective solution for the detection of combustible and toxic gases and oxygen deficiency. The TG5000 includes a 95dB audible alarm with horn silence control, LED strobe, and a helpful Bluetooth® interface that connects with MSA's X/S Connect... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100, 0-1000 ppm); CO2 (0-2, 0-5% Vol); CO (0-100, 0-500 ppm); Cl2 (0-5, 0-10, 0-20 ppm); ClO2; Hydrocarbons (0-100% LEL); H2 (0-1000 ppm); HCl (0-50 ppm); HCN (0-50 ppm); HF (0-10 ppm); H2S (0-10, 0-50, 0-100 ppm); Methane (CH4) / Natural Gas (0-100% LEL); NO2 (0-10 ppm); O2 (0-25%); SO2 (0-25 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared
from Safeguard Analytics
Designed for monitoring a wide range of gases in ambient air, SA-XDS systems utilize Smart Sensors, each with a combination of optional gas types, range of sensitivity and alarm levels. The system controller is equipped with an intuitive full-script Human Machine Interface (HMI) featuring a color... [See More]
- Gas Types: Toxic; Combustible (Oxygen Deficiency, VOCs, Refrigerants)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Diffusion
from Control Instruments Corp.
The Model SNR701 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR701 to sample low oxygen and... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LFL); H2 (0-100% LFL); Methane (CH4) / Natural Gas (0-100% LFL)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor; Analyzer
- Sensor Technology: Flame temperature sensor
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted into the furnace or flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion optimization, process control and furnace atmosphere monitoring. [See More]
- Gas Types: Combustible; O2
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Zirconia
from DOD Technologies Inc.
The world ’s first 4G-connected integrated man down alarm equipped with a five gas monitor. In the event of an emergency, the G7c wirelessly connects your team members with live monitoring personnel to mobilize the fastest emergency response possible. Any device can be equipped with the... [See More]
- Gas Types: Combustible
- Mounting Type: Portable
- Instrument Type: Monitor
- Sensor Technology: Electrochemical; Electrochemical
from CO2Meter.com
The Fixed Combustible Carbon Monoxide (CO) Gas Detector (PX2-1-2-E1110-C-01): is designed for continuous monitoring of carbon dioxide gases to prevent leaks in the range of 0 to 150ppm for 24 hours in the confined space or automotive industries. This detector is also compatible with a wide range of... [See More]
- Gas Types: Combustible; CO (Combustible Fixed Gas Detectors - Carbon Monoxide Combustible Fixed Gas Detector (0-150ppm))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Acme Engineering Products
The Pioneer Gen II is a budget conscious two gas combo detector that is configured and operated through a Bluetooth application. In its standard configuration, the Gen II combines integral CO/NO2 sensing elements. Installation is fast and simple given that all the connections are located within one... [See More]
- Gas Types: Toxic; Combustible; NH3; CO; Cl2; Hydrocarbons; H2; H2S; Methane (CH4) / Natural Gas; NO2; O2
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature)
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from MSA Safety
The ULTIMA ® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell ® gas sensors with TruCal ® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 ppm, 0-1000 ppm); CO2 (0-2%, 0-5% Vol); CO (0-100, 0-500, 0-1000 ppm); Cl2 (0-5, 0-10. 0-20 ppm); Hydrocarbons (0-100% LEL); H2 (0-1000 ppm); HCl (0-50ppm); H2S (0-10, 0-50, 0-100 ppm); Methane (CH4) / Natural Gas (0-100% LEL); NO (0-100ppm); NO2 (0-10 ppm); O2 (0-25%); SO2 (0-25 ppm, 0-100 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared
from Safeguard Analytics
Fully scalable gas detection control systems for continuous monitoring and measurement of gases in both local and distributed environments, complete with alarm capabilities. The SCX supports both analog and digital devices, accommodating up to 32 sensors and eight distributed analog devices. With an... [See More]
- Gas Types: Toxic; Combustible (Oxygen Deficiency, VOCs, Refrigerants)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Controller
from ABB Measurement & Analytics
ABB ’s new ACF5000 is the specialist for emission and process monitoring from the pioneers in FTIR CEMS. It is available in the 4th generation. Since introduction in 1993, ABB has sold more than 2000 units. The standard system design combines the advantages of a FTIR spectrometer, flame... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-7ppm, 0-300ppm); CO2 (0-30% by volume); CO (0-65ppm, 0-3200ppm); Hydrocarbons (CH4 0-10ppm to 0-280ppm, CH2O 0-15ppm); HCl (0-15ppm, 0-125ppm); HF (0-3ppm, 0-7ppm); Methane (CH4) / Natural Gas (0-10ppm, 0-280ppm); NO (0-110ppm, 0-1500ppm); NO2 (0-40ppm, 0-300ppm); NxOx (N20 0-25ppm, 0-500ppm); O2 (0-25% by volume); SO2 (0-25ppm, 0-525ppm); Water Vapor (0-40% by volume) (VOC)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Number of Gases Monitored: Multi
from DOD Technologies Inc.
The Blackline Safety G7x system uses integrated satellite and cellular connectivity to wirelessly link employees and lone workers to real people, while automating data analytics and compliance reporting. Should a gas leak, injury or health event occur, G7x confidently accounts for everyone's... [See More]
- Gas Types: Combustible
- Mounting Type: Portable
- Instrument Type: Monitor
- Sensor Technology: Electrochemical; Electrochemical
from CO2Meter.com
The Hydrogen H2 Combustible Fixed Gas Detector is designed for continuous monitoring of hydrogen toxic gases between 0-1000ppm and vapors in hazardous areas of zones 1 and 2. This detector is an explosion-proof fixed H2 gas detector, which measures between 0 - 1000ppm. The detector also is based... [See More]
- Gas Types: Combustible (Combustible Fixed Gas Detectors - Hydrogen H2 Combustible Fixed Gas Detector (0-1000ppm))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Acme Engineering Products
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing... [See More]
- Gas Types: Toxic; Combustible; CO2 (optional feature); CO; Hydrocarbons (optional feature); H2 (optional feature); Methane (CH4) / Natural Gas (optional feature); NO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from MSA Safety
The TriGas X5000 Monitoring System is an integrated gas detection solution that helps plant operators comply with NFPA 820. The system monitors for combustible gases, hydrogen sulfide and oxygen with on-board alarming and communication interface to plant and remote location control stations. [See More]
- Gas Types: Combustible; H2S; O2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from DOD Technologies Inc.
Individuals need personal protection in hazardous areas at all times without adding extra bulky equipment, and the GP-03 can provide that kind of protection at an affordable price. The GP-03 is a personal single gas monitor designed for protection from exposure to combustible hydrocarbons. The GP-03... [See More]
- Gas Types: Combustible
- Mounting Type: Portable
- Instrument Type: Detector
- Sensor Technology: Catalytic; Catalytic Bead
from CO2Meter.com
The Hydrogen Sulfide (H2S) Combustible Fixed Gas Detector (PX2-1-2-E1197-B-01) is designed for continuous monitoring of H2S gases between 0-100ppm and vapors in hazardous areas of zones 1 and 2. This detector is an explosion-proof fixed H2S gas detector, based with a 4-20 mA / RS485 Modbus output... [See More]
- Gas Types: Combustible (Combustible Fixed Gas Detectors - Hydrogen Sulfide (H2S) Combustible Fixed Gas Detector (0-100ppm))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Acme Engineering Products
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple... [See More]
- Gas Types: Toxic; Combustible; NH3; CO; Cl2; Hydrocarbons; H2; H2S; Methane (CH4) / Natural Gas; NO2; O2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic
from MSA Safety
Every feature of the PrimaX IR Gas Transmitter is designed with reliability in mind to withstand the most challenging environmental conditions through out the product ’s life. MSA ’s PrimaX IR Gas Transmitter offers LEL (Lower Explosive Limit) combustible gas detection through a patented... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LEL)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Infrared
from DOD Technologies Inc.
The GTD-2000Ex Explosion-Proof Combustible Gas Detector provides comprehensive monitoring of flammable gas hazards in potentially explosive atmospheres (both indoors and outdoors). Modify detector operations using the LCD without the need to open the unit. This enables single-person, non-intrusive... [See More]
- Gas Types: Combustible
- Mounting Type: Fixed
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from CO2Meter.com
The Methane (CH4) Combustible Fixed Gas Detector (PX2-1-2-P3400-A-01) is designed for continuous monitoring of CH4 gases between 0-100% LEL and vapors in hazardous areas of zones 1 and 2. This detector is an explosion-proof fixed CH4 gas detector, based with a 4-20 mA / RS485 Modbus output signal,... [See More]
- Gas Types: Combustible; Methane (CH4) / Natural Gas (Combustible Fixed Gas Detectors - Methane (CH4) Combustible Fixed Gas Detector (0-100% LEL))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Acme Engineering Products
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900... [See More]
- Gas Types: Toxic; Combustible; CO2; CO; Refrigerants; Hydrocarbons; H2; H2S; NO2; O2
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature)
from MSA Safety
A cost-efficient monitor for underground garages and ventilation control, the Z-Gard COmbo Gas Monitor uses a solid-state sensor to detect carbon monoxide. The unit features local audio/visual alarm status indicators and it can be configured to interface with air-handling equipment to control air... [See More]
- Gas Types: Combustible; CO (0-100 ppm, 0-200 ppm); NO2 (0-100 ppm, 0-200 ppm)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Measurement Type: %LEL or %LFL; Trace
from DOD Technologies Inc.
The GX-3R Is The World's Smallest & Lightest 4-Gas Monitor!. OSHA defines the breathing zone as a ten inch radius around the worker ’s nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the... [See More]
- Gas Types: Combustible
- Mounting Type: Portable
- Instrument Type: Monitor
- Sensor Technology: Electrochemical; Electrochemical
from CO2Meter.com
The Nitrogen Dioxide NO2 Combustible Fixed Gas Detector (PX2-1-2-E1130-E-01) is designed for continuous monitoring of nitrogen dioxide gases to prevent leaks in the range of 0 to 100ppm for 24 hours in confined spaces or industrial manufacturing industries. This detector is also compatible with a... [See More]
- Gas Types: Combustible; NO2 (Combustible Fixed Gas Detectors - Nitrogen Dioxide NO2 Combustible Fixed Gas Detector (0-100ppm))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Acme Engineering Products
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz... [See More]
- Gas Types: Toxic; Combustible; CO2; CO; Refrigerants; Hydrocarbons; H2; H2S; NO2; O2
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature)
from MSA Safety
The Z-Gard S MPO Gas Sensor connects directly to a building automation system for single gas monitoring solutions. It detects the presence of either carbon monoxide, nitrogen dioxide or combustible gases in air. The Z-Gard MPO Sensor communicates with one of several industry standard protocols,... [See More]
- Gas Types: Toxic; Combustible; CO (0-100 ppm, 0-200 ppm); NO2 (0-10 ppm)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic; Electrochemical
from DOD Technologies Inc.
The GX-6000 6 Gas, Sample Draw Gas Monitor With PID, IR & Super Toxic Sensor!. The GX-6000 is a game changer. This powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, &... [See More]
- Gas Types: Combustible
- Mounting Type: Portable
- Instrument Type: Monitor
- Sensor Technology: PID; PID
from CO2Meter.com
The Oxygen Combustible Fixed Gas Detector (PX2-1-2-E1195-A5-01) is designed for continuous monitoring of toxic gases to prevent leaks in the range of 0 to 25% for 24 hours in confined spaces or industrial applications. This detector is also compatible with a wide range of controlled BMS systems and... [See More]
- Gas Types: Combustible; O2 (Combustible Fixed Gas Detectors - Oxygen Combustible Fixed Gas Detector (0-25%))
- Operating Temperature: -30 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 15 to 90
from Process Sensing Technologies USA
The XZR200 Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues. A cost effective zirconium-dioxide analyzer to measure percentage level oxygen in combustion processes, ambient air monitoring and many more applications. The unit is... [See More]
- Gas Types: Combustible
- Measurement Type: %Volume
- Sensor Technology: Zirconium Dioxide
- Features: Self Calibration
from H2scan, Corp.
H2scan's HY-OPTIMA ™ 700B series in-line, real time hydrogen-specific process analyzers are designed for ease of use, interface flexibility and true process control. The HY-OPTIMA ™ 700B series is a solid-state sensor that is configured to operate in process gas streams with temperatures... [See More]
- Gas Types: Combustible; H2 (0.5% to 100%)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Semiconductor; Solid State Sensor
from Siemens Process Instrumentation
Due to its multi-component design with UV and NDIR technology for measuring up to three IR-active components and optionally available electrochemical sensors (O2 and H2S measurement), the ULTRAMAT 23 offers high cost efficiency and space savings. ULTRAMAT 23 – a true all-rounder. The ULTRAMAT... [See More]
- Gas Types: Toxic; Combustible; CO2; CO; H2S (0-5 / 0-50 vpm); Methane (CH4) / Natural Gas; NO; O2 (0-5% / 0-25% EC and 0-2% / 0-100% Dumbbell); SO2; SF6 (C2H4)
- Sensor Technology: Infrared; PID
- Instrument Type: Analyzer
- Number of Gases Monitored: Multi
from Environment One Corporation
E/One's Generator Gas Analyzer (GGA) for hydrogen-cooled generators is a triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. We've taken a proven monitoring principle — thermal conductivity — and improved upon it. The... [See More]
- Gas Types: Combustible; H2 (0 to 100% H2 in Air) (H2 in CO2, H2 Air in CO2)
- Mounting Type: Fixed
- Instrument Type: Monitor; Analyzer
- Sensor Technology: Thermoconductivity
from Roscid Technologies
The Model CH-Trans is simple, accurate and. very simple to use in measuring the % levels of hydro carbons. three wire hydrocarbon transmitter. The Model CH-Trans is simple, accurate and very simple to use in measuring the % levels of hydro carbons. One User specific measuring range. The unit offers... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100%)
- Sensor Technology: Infrared
- Instrument Type: Analyzer
- Number of Gases Monitored: Multi
from REED-Direct
High-Low sensitivity selector. Detects leaks as small as 5ppm of gasoline. Ambient concentration reset function. Audible and visual leak indications. Flexible stainless steel probe. Low battery indication. Includes: batteries, a reference leak source & hard carrying case. Auto Power Off. [See More]
- Gas Types: Combustible; Hydrocarbons
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Sensor Technology: Semiconductor
from Axetris AG
The LGD F200 instrument series is based on a contact-less, near-infrared absorption measurement of the target gas. The systems are self-contained, ready-to-use OEM modules, using a flow-through cell set-up forextractive measurements. [See More]
- Gas Types: Toxic; Combustible; Methane (CH4) / Natural Gas ((0 to 1000 ppm))
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Tunable Diode Laser Spectrometer
from Conspec Controls Inc.
CONSPEC's CN Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CN Series is a simple and "smart" gas detector. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for... [See More]
- Gas Types: Toxic; Combustible; CO
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from LumaSense Technologies, Inc., An Advanced Energy Company
The LumaSense Technologies' ANDROS 6500 series offers unparalleled accuracy and performance through simplicity of design and implementation. Unlike analyzers that require moving components, the 6500 series uses a pulsed infrared source to achieve high accuracy with high reliability. Key Features of... [See More]
- Gas Types: Combustible; CO2 (0.01 to 20.00%); CO (0.001 to 15.000%); Hydrocarbons (1 to 30,000 ppm); NxOx (NOx: 0 to 5,000 ppm); O2 (0.01 to 25.00%)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Electrochemical; Infrared
from Senscient Inc.
Reliable, rapid detectionof methane concentrations in pre-combustion ventilation systems at 0.5 to 5.0 meters. 100% continuous measurement of normal gas levels present in the combustion stream and rapid, accurate detection of breakthrough gas levels for optimum safety in combustion operations. Fully... [See More]
- Gas Types: Combustible; Methane (CH4) / Natural Gas (0 to 100% LEL)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Infrared; Enhanced Laser Diode Spectroscopy
from Honeywell Analytics, Inc.
The Sensepoint XCD transmitter provides comprehensive monitoring of combustible, toxic and Oxygen gas hazards in potentially explosive atmospheres, indoors and outdoors —and is marked by installation ease and flexibility, user-friendly operation and cost-effective gas monitoring. Sensepoint... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-50PPM); CO (0-200 PPM / 0-500 PPM); Cl2 (0-5 PPM / 0-15 PPM); Hydrocarbons (0-100% LEL); H2 (0-1000 PPM); H2S (0-50 PPM / 0-100 PPM / 0-20 PPM); NO2 (0-10 PPM); O2 (0-25% VOL); SO2 (0-15 PPM / 0-50 PPM)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical
from Pem-Tech, Inc.
Model PT500 is a microprocessor-based multi-channel controller that provides up to 4 channels of continuous gas detection. The controller is housed in a Nema 4X weatherproof enclosure. PT500 can be interfaced with any of Pem-Tech's toxic and combustible gas sensors. The controller provides a front... [See More]
- Gas Types: Toxic; Combustible; NH3 (optional feature); CO (optional feature); Cl2 (optional feature); ClO2 (optional feature); Hydrocarbons (optional feature) (0-100% LEL); H2 (optional feature); HCl (optional feature); HCN (optional feature); H2S (optional feature); NO (optional feature); NO2 (optional feature); O2 (optional feature) (0-25% Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Industrial Scientific Corporation
The MX6 iBrid® is the most adaptable six-gas monitor on the market. With hundreds of possible sensor combinations and a robust list of available configuration settings, the MX6 iBrid gas detector is ready to monitor oxygen, toxic and combustible gas, and volatile organic compounds (VOCs). [See More]
- Gas Types: Toxic; Combustible
- Mounting Type: Handheld; Portable
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared
from COSA Xentaur Corporation
The COSA 707 is a hand held multigas analyzer for industrial and combustion processes. The COSA 707 is an easy to hold, hand-held emissions analyzers capable of measuring up to seven different gases. The emissions analyzer can be equipped with up to 6 electrochemical sensors and a CO2 IR-bench for... [See More]
- Gas Types: Combustible; CO2 (optional feature) (0 - 20%); CO (optional feature) (0 - 10%); H2S (optional feature) (0 - 500 ppm); NO (optional feature) (0 - 5000 ppm); NO2 (optional feature) (0 - 1000 ppm); NxOx (optional feature) (0 - 5000 ppm); O2 (optional feature) (0 - 21%); SO2 (optional feature) (0 - 5000 ppm)
- Mounting Type: Handheld; Portable
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical
from Teledyne Monitor Labs, Inc.
The sensor-e ® NOx uses the proven. chemiluminescence detection principle,. coupled with state-of-the-art. microprocessor technology to provide. the sensitivity, stability and ease. of use needed for ambient or CEM. monitoring requirements. The analyzer uses multi-tasking software. which allows... [See More]
- Gas Types: Combustible; NO (0-50 ppb / 0-20 ppm); NO2 (0-50 ppb / 0-20 ppm); NxOx (0-50 ppb / 0-20 ppm)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Chemiluminescence
from Pyott-Boone Electronics (PBE Group)
The Model 2200, when used with the Model BBS/II Power Supply with Battery Backup, is a stand-alone, environmental gas monitor capable of measuring four different gas types in a simple package. Available sensor types are: Carbon Monoxide, Oxygen, Methane (combustible gases), Nitric Oxide, Nitrogen... [See More]
- Gas Types: Combustible; NH3; CO; Cl2; Hydrocarbons ((CH4) ( (All combustible gases)); H2; H2S; NO; NO2; O3; SO2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Application: Confined Space Entry
from Det-Tronics
Shown with the FlexVu UD10 Universal Display/Controller, the catalytic combustible gas sensor (CGS) is a globally-approved, stainless steel sensor that is poison-resistant. It provides unmatched detection of almost all combustible gases in harsh industrial environments, and is compatible with the... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LFL Standard); H2
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic
from Bacharach, Inc.
Fast, accurate measurement of CO for both ambient air and flue gas applications. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Advanced features like trending display and a 15-minute CO ambient test. Available accessories for appliance testing, differential temperature... [See More]
- Gas Types: Combustible; CO (0 - 2,000 ppm in 1 ppm Increments)
- Number of Gases Monitored: Single
- Instrument Type: Analyzer
- Measurement Type: Trace
from HORIBA Instruments, Inc.
The Metal-Organic Chemical Vapor Deposition (MOCVD) process is widely used in the manufacture of LEDs, optical devices and other components. Liquid and solid precursors are delivered to the reaction chamber by controlling the temperature, pressure and the carrier gas flow rate (bubbling method). The... [See More]
- Gas Types: Toxic; Combustible; B2H6 (B2H6 10 Vol% / H2 or He); GeH4 (1 Vol% / H2) (TMGa, DEZn, IPA, TMn, TEGa, TMAI)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Infrared
from Delphian Corporation
The DC controller is a smart two channel digital device which displays alarms and concentrations of the gas(s) to be sensed. Each channel can be configured independently and unlike other controllers, the two channels are completely independent of one another. Each channel provides three gas alarms,... [See More]
- Gas Types: Combustible; Hydrocarbons; H2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic
from Terra Universal, Inc.
Quick response. 3-level leak indication with LED and audio indicators. Gas concentration alarm. Sensitivity Adjustable. This Portable Combustible Gas Leak Detector is a highly sensitive wide range gas detector. It can be used to detect natural gases or LPG. Goose neck probe allows for easy access to... [See More]
- Gas Types: Combustible (Natural gas, LPG)
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Sensidyne, LP
The Sensidyne Compressed Breathing Air (CBA) Analysis Kit allows anyone to simply, quickly, and quantitatively measure all four of the common contaminants in breathing air, plus oxygen defeciency. [See More]
- Gas Types: Toxic; Combustible; CO2 (optional feature) (100-3000ppm); CO (optional feature) (5-100ppm); Hydrocarbons (optional feature) (0.3-5 mg/M3); O2 (optional feature) (2-24%Volume); Water Vapor (optional feature) (20-160 mg/M3)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Number of Gases Monitored: Single
from Linde North America, Inc.
G-TECTA ™ SG is a fully functional premium single gas instrument, water and dust resistant, with one button operation and a choice of 28 sensors to suit almost every application. The lightweight and robust design combined with full download and data logging capability offers the ideal single... [See More]
- Gas Types: Toxic; Combustible; NH3; CO2; CO; Cl2; ClO2; Hydrocarbons; H2; HCN; HF; H2S; Methane (CH4) / Natural Gas; NO; NO2; O3; PH3; SO2
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
High precision automobile emission gas analyzer Gasboard-3000E is based on advanced 00 class emission standards, mainly used for measuring exhaust gases of CO, CO2, HC, O2, NO from petro, gasoline, CNG engines, for car testings lines, garage stations and so on [See More]
- Gas Types: Combustible; CO2 (0-18%); CO (0-14%); Hydrocarbons (0-9999ppm); NO (0-5000ppm); O2 (0-25%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared
from Eagle Eye Power Solutions, LLC
The Eagle Eye GD-3000 combustible gas detector is a versatile, easy-to-use device that allows you to select between methane (NG), propane (LP), or hydrogen (H2) gas detection. The GD-3000 provides low-level detection of combustible gas in an easy-to-maintain monitor that is factory calibrated for... [See More]
- Gas Types: Combustible; H2; Methane (CH4) / Natural Gas (Propane)
- Mounting Type: Fixed
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Emerson Automation Solutions – Rosemount
The CCO 5500 Carbon Monoxide (CO) Analyzer uses infrared absorption spectroscopy to continuously measure CO concentration in combustion flue gases. The infrared source is mounted directly on the flue gas duct or stack on the side opposite from the receiver. Infrared energy is radiated by the source,... [See More]
- Gas Types: Toxic; Combustible; CO (0-100, to 0-9,999 ppm)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Infrared
from INDECK Power Equipment Company
Standard Indeck systems are based on our nearly half century of packaged boiler field experience and are available for immediate delivery. Custom systems are rapidly developed and completed through our in-house engineering, UL listed panel shop, and large component inventory. Types: Single Point... [See More]
- Gas Types: Combustible; CO; H2; Methane (CH4) / Natural Gas; NxOx; O2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Single; Multi
from Nova Analytical Systems Inc.
The Nova 4230 Process Hydrogen Analyzer has been specifically designed for the accurate measurement of H2 in exothermic or 'DX' gas from a furnace, generator, or other processes with high levels of H2 and CO2. The CO2 acts as an interference to the measurement of Hydrogen when using a thermal... [See More]
- Gas Types: Combustible; CO2 (0-100%); H2 (0-100%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Thermal Conductivity Cell
from Owlstone Inc.
Lonestar is a portable gas analyzer that can detect a broad range of analytes at part per billion concentrations, with high selectivity in just a few seconds. [See More]
- Gas Types: Toxic; Combustible; Hydrocarbons; Methane (CH4) / Natural Gas (User Defined)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: PID
from Process Sensing Technologies USA
The OXY-Flex Oxygen Analyzer is suitable for measuring in oxygen closed systems, such as ventilation pipes and boiler exhaust flues. The OXY-Flex Oxygen Analyzer is designed to measure the oxygen concentration in air or gas mixtures with temperatures of -100 to 400 ⁰C. The oxygen analyzer... [See More]
- Gas Types: Combustible
- Features: Self Calibration
from H2scan, Corp.
H2scan's HY-ALERTA ™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen's low... [See More]
- Gas Types: Combustible; H2 (0.4% to 5.0%)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Hydrogen-Specific Sensor Technology
from Siemens Process Instrumentation
CALOMAT 62 | for hydrogen and noble gases in corrosive gases. Measures hydrogen and noble gases in corrosive gases. The CALOMAT 62 is a thermal conductivity analytical device specially designed for applications in corrosive gases. Concentration of gas components such as Cl2, HCl, and NH3 can be... [See More]
- Gas Types: Toxic; Combustible; Cl2; H2; HCl
- Sensor Technology: Thermal conductivity
- Instrument Type: Analyzer
- Number of Gases Monitored: Single
from Environment One Corporation
Environment One's standard Generator Gas Analyzer (GGA) can also be supplied in a portable configuration. The PGA incorporates the same hydrogen gas sensor/analyzer and system electronics found in our other hydrogen gas purity systems. The PGA is specifically intended for use in non-hazardous... [See More]
- Gas Types: Combustible; H2 (0 to 100% H2 in Air) (H2 in CO2, H2 Air in CO5)
- Mounting Type: Fixed
- Instrument Type: Monitor; Analyzer
- Sensor Technology: Thermoconductivity
from Roscid Technologies
The Model CO Tracer is simple, accurate and very economic measurement of CO in the ppm levels. The sensor comes fully calibrated and requires no calibration for two years. The CO Tracer uses a special electro chemical cell to measure the CO concentration. The sensor meets the industrial requirements... [See More]
- Gas Types: Toxic; Combustible; CO (0-50ppm)
- Sensor Technology: Electrochemical
- Instrument Type: Analyzer
- Number of Gases Monitored: Single
from REED-Direct
Low power semi-conductor sensor. Includes soft carrying case and batteries. SPECIFICATIONS: Sensitivity: 50 ppm methane. Warm-up Time: Approx. 5 minutes. Response Time: < 2 seconds. Alarm Limit: At 10% LEL for methane. Power Supply: 3 x "C" batteries. Battery Life: 8 hours of continuous use. [See More]
- Gas Types: Combustible; NH3; CO; Hydrocarbons (50 ppm, 10% LEL); H2S; Water Vapor (Industrial Solvents, Lacquer Thinner)
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Sensor Technology: Semiconductor
from Axetris AG
The LGD F200 instrument series is based on a contact-less, near-infrared absorption measurement of the target gas. The systems are self-contained, ready-to-use OEMmodules, using a flow-through cell set-up for extractive measurements. The slightly bigger LGD F200 (H) version features optional cell... [See More]
- Gas Types: Toxic; Combustible; Methane (CH4) / Natural Gas ((0 to 40,000 ppm))
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Tunable Diode Laser Spectrometer
from Conspec Controls Inc.
CONSPEC's CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and "smart" gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS... [See More]
- Gas Types: Toxic; Combustible; CO
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from LumaSense Technologies, Inc., An Advanced Energy Company
Available with two gas channels, the Andros 6552 can be configured for specific types of refrigeration plants or as a general purpose device that can be applied to any type or combination of refrigeration systems that may employ Freons and Carbon Dioxide. Key Features of Andros 6552 Gas Analyzer. [See More]
- Gas Types: Toxic; Combustible; CO2 (0.01% to 20.00%); Refrigerants (1 to 10,000 ppm); NxOx; O2
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Electrochemical; Infrared
from Honeywell Analytics, Inc.
Highest performance fixed flammable and toxic gas detector with a choice of communication outputs, accessories and installation flexibility. Apex takes the best elements of gas detection design and combining them into one unit. Apex provides the highest performance, installation flexibility, a wide... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-50 PPM / 0-1000 PPM); AsH3 (0-0.2 PPM); Br2 (0-0.4 PPM); CO (0-100 PPM / 0-500 PPM); Cl2 (0-2 PPM / 0-15 PPM); ClO2 (0-0.4 PPM); B2H6 (0-0.4 PPM); F (0-4 PPM); GeH4 (0-0.8 PPM); Hydrocarbons (0-100% LEL); H2 (0-1000 PPM); HCl (0-20 PPM); HCN (0-20 PPM); HF (0-12 PPM); H2S (0-15 PPM / 0-100 PPM); NO (0-100 PPM); NO2 (0-12 PPM); O2 (0-21 % v/v); O3 (0-4 PPM); PH3 (0-1.2 PPM); SiH4 (0-20 PPM); SO2 (0-8 PPM / 0-50 PPM) (Many other toxic gases- see datasheet)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical
from Pem-Tech, Inc.
Model PT900-6XP is a microprocessor based modular controller suitable for use in Hazardous locations. Maximum of six (6) PT900 Series toxic or combustible gas control module can be interfaced with Pem-Tech's gas sensors. The control modules provide digital display, discrete 4-20mA analog output and... [See More]
- Gas Types: Combustible; Cl2 (optional feature); Hydrocarbons (optional feature) (% LEL); H2Se (optional feature); H2S (optional feature); O2 (optional feature) (Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Industrial Scientific Corporation
The Radius® BZ1 Area Monitor is a rugged gas detector that connects your entire worksite. Designed to go where the work is, Radius can be deployed in seconds for emergency response scenarios or left in the field for up to 7 days on a single charge or for an unlimited period with the Solar Power... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-500ppm); CO2 (0-5%); CO (0 - 1500ppm); Cl2 (0-50ppm); Hydrocarbons (Methane, pentane 0-100% LEL;Methane 0-5%); H2; H2S (0-500 ppm); Methane (CH4) / Natural Gas (Methane, pentane 0-100% LEL;Methane 0-5%); NO2 (0-150 ppm); O2 (0-30% Volume); SO2 (0 - 150 ppm)
- Mounting Type: Portable
- Instrument Type: Monitor
- Sensor Technology: Electrochemical
from COSA Xentaur Corporation
The COSA/Xentaur Continuous Hydrogen Analyzer (CHA), used in countless UOP Schedule A applications for many years, is built under a license to a patented UOP design. It provides petroleum refiners, petrochemical producers, and electric power generators a means to continuously and accurately monitor... [See More]
- Gas Types: Combustible; H2 (0.04 - 100%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical
from Det-Tronics
The Model 505 Transmitter provides extremely cost-effective protection and performance. Used exclusively with our model CGS catalytic gas sensor, the 505 provides one-person calibration capability using a standard digital volt meter. The 505's analog 4 to 20 mA output signal is compatible with our... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LFL); H2
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Catalytic
from Bacharach, Inc.
Measures O2, CO, stack and air temperature for complete combustion analysis. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Compatible with the Bacharach Reporting App. Six fuels available in North American configuration covering most applications like natural gas, oil... [See More]
- Gas Types: Combustible; CO (0 to 2000 ppm); O2 (0 to 20.9%)
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Measurement Type: %Volume; Trace
from Delphian Corporation
The Micro Controller is fixed installation single channel and slides into the Flexirack. It requires a compact one inch of panel space three and one-half inches high. It is a simple design with few parts there is less that can go wrong. It is easy to maintain and repair. The controller uses a rugged... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100%); H2
- Sensor Technology: Catalytic
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from Sensidyne, LP
Four Channel Controller. • NEMA 4X, UL Listed Enclosure. • 115/230 VAC or 24 VDC. • Visual and Audible Annunciation. • Discrete LED and LCD Displays. • Automatic Sensor Recognition. • Twelve SPDT 5 amp Alarm Relays. • Common Fault Alarm Relay. • 4-20 mA &... [See More]
- Gas Types: Toxic; Combustible
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from Linde North America, Inc.
G-TECTA ™ 4GP is an extremely robust 4 gas instrument with built in pump and charger. The single button operation and full data management allows the users to effectively manage their gas detection requirements with confidence. G-TECTA 4GP has infrared communication, full functional capability... [See More]
- Gas Types: Toxic; Combustible; NH3; CO; Cl2; H2; HCN; HF; H2S; Methane (CH4) / Natural Gas; NO; NO2; O2; O3; PH3; SO2
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Cubic Sensor and Instrument Co.,Ltd.
Automobile emission gas analyzer Gasboard-5020 is a portable type exhaust gas analyzer, mainly used for measuring exhaust gases of CO, CO2, HC, O2, NO from petro, gasoline, CNG engines, with built-in printer, high accuracy, stable performance and easy operation. [See More]
- Gas Types: Combustible; CO2 (0-20%); CO (0-10%); Hydrocarbons (0-9999ppm); NO (0-5000ppm); O2 (0-25%)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared
from Eagle Eye Power Solutions, LLC
The Eagle Eye HGD-3000 Hydrogen Gas and Smoke Detector with (optional) Silent Intrusion Alarm is designed for unattended battery installations or remote shelters containing gassing lead acid batteries and charging systems - most commonly found in the telecommunications and utility sectors. Other... [See More]
- Gas Types: Combustible; H2
- Number of Gases Monitored: Single
- Instrument Type: Detector
- Application: Ambient Air Monitoring
from Emerson Automation Solutions – Rosemount
The GDU-Incus is an advanced gas leak detection system utilizing four ultra-sensitve acoustic sensors which constantly monitor wide areas for ultrasound generated from the release of pressurized gas. Ideally suited for monitoring well ventilated outdoor environments, the GDU-Incus has been... [See More]
- Gas Types: Toxic; Combustible
- Sensor Technology: Acoustic
- Mounting Type: Fixed
- Measurement Type: Leakage
from Nova Analytical Systems Inc.
The Nova 900 Series analyzers have been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas without the need for cooling water, compressed air, or failure-prone thermoelectric elements. The 900... [See More]
- Gas Types: Combustible; O2 (0-25%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical (optional feature); Infrared (optional feature)
from Owlstone Inc.
NEXSENSE C is a man portable chemical detection and identification system that enables rapid and robust on-scene analysis of chemical agents from airborne samples. Utilising Owlstone's cutting edge Field Asymmetric Ion Mobility Spectrometry (FAIMS) technology combined with intelligent data... [See More]
- Gas Types: Toxic; Combustible; Hydrocarbons; Methane (CH4) / Natural Gas (User Defined)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: PID
from Process Sensing Technologies USA
The XZR500 oxygen analyzer from Michell Instruments is designed to determine the excess air required for optimum combustion. It uses advanced Zirconium Oxide technology to measure levels of oxygen in harsh conditions such as boilers, incinerators, cremators and furnaces. It provides fast, accurate... [See More]
- Gas Types: Combustible; O2 (0.01 - 25% Oxygen)
- Sensor Technology: Zirconium Oxide Sensor with metallic sealed reference and K Type T/C
- Instrument Type: Analyzer
- Measurement Type: %Volume
from H2scan, Corp.
H2scan's 2620 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen's low flammability limit. The... [See More]
- Gas Types: Combustible; H2 (0.4% to 5.0%)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Hydrogen-Specific Sensor Technology
from Siemens Process Instrumentation
ULTRAMAT 6 | for IR-active components. The experts in IR-active components. Most frequently used for sophisticated applications, the ULTRAMAT 6 must meet high standards with regard to reliability and measurement quality. This is guaranteed by modern electronics, ease of operation, and a physical... [See More]
- Gas Types: Toxic; Combustible; CO2; CO; Hydrocarbons; Methane (CH4) / Natural Gas; NO; SO2
- Sensor Technology: Infrared
- Instrument Type: Analyzer
- Number of Gases Monitored: Multi
from Roscid Technologies
This medical gas analyzer is designed for fast, accurate and economic measurement of CO and Dew Point in medical air applications. A simple menu-driven software and LED-display allows easy and fast start-up of the instrument. Ranges. The CO can be measured in the range of 0 – 50 ppm and the... [See More]
- Gas Types: Toxic; Combustible; CO (0-50ppm)
- Sensor Technology: Electrochemical; Capacitive Sensor
- Instrument Type: Monitor; Analyzer
- Number of Gases Monitored: Single
from REED-Direct
GAS DETECTOR, FLAMMABLE. Detectable gases: Natural gas and Propane/Butane. Conforms to the National and European guidelines, Cat. II, Class B. SPECIFICATIONS: Operating Conditions: 14 to 120 °F (-10 to 50 °C); 95% RH or lower. Power Supply: 2 x 1.5V "AA" batteries. Battery Life: 4 hours of... [See More]
- Gas Types: Combustible; Hydrocarbons
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Conspec Controls Inc.
CONSPEC Controls Multi-Channel Controller is a microprocessor-based multi-analog input controller. The P2259/60 was designed to be an independent stand-alone controller but can integrate into any type of data acquisition system. The Controller can provide up to eight channels of remote monitoring... [See More]
- Gas Types: Combustible; Aerosols; NH3; AsH3; Br2; CO2; CO; Cl2; ClO2; B2H6; F; GeH4; Refrigerants; Hydrocarbons; H2; HCl; HCN; HF; H2Se; H2S; NO; NO2; O2; O3; PH3; SiH4; SO2; SF6
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from Honeywell Analytics, Inc.
UL certified, explosion-proof flammable gas detectors with high temperature version certified to 150 °C. The Model 705 high temperature sensor has been specifically designed for the detection of combustible gases in high temperature hazardous area locations. Typical applications include turbine... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LEL / 0-20% LEL); H2 (0-100% LEL) (Flammable gases)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic
from Pem-Tech, Inc.
Large Graphic display (240 x 128 Pixels). Optional Historical data Logging with Real time clock calendar. Sensor interface: 4-20mA transmitter or Addressable serial IO type. Eight (8) channels for analog sensors (PT295 series) or 24 addressable sensors (Ultra1000 series). Easy Configuration using... [See More]
- Gas Types: Toxic; Combustible; NH3 (optional feature); CO (optional feature); Cl2 (optional feature); ClO2 (optional feature); Hydrocarbons (optional feature) (0-100% LEL); H2 (optional feature); HCl (optional feature); HCN (optional feature); H2S (optional feature); NO (optional feature); NO2 (optional feature); O2 (optional feature) (0-25% Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Industrial Scientific Corporation
Experience maintenance-free gas detection and improved worker safety with the Tango®TX1 single gas monitor. A 2-year runtime and patented DualSense® Technology, increase worker safety, regardless of bump test frequency, while reducing overall costs. Simply put, with two of the same sensor, the Tango... [See More]
- Gas Types: Toxic; Combustible; CO (1-1000ppm); H2; H2S (0-500 ppm); NO2 (0-150 ppm); SO2 (0 - 150 ppm)
- Mounting Type: Handheld; Portable
- Instrument Type: Monitor
- Sensor Technology: Electrochemical
from Det-Tronics
The PIRDuct "DuctWatch" combustible IR gas detector is specially designed to deliver reliable gas detection in enclosed airhandling ductwork applications. Safety engineers have long been aware that duct air monitoring provides the ability to maximize protection of confined spaces in challenging... [See More]
- Gas Types: Combustible; Hydrocarbons (0-15% LFL)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Infrared
from Bacharach, Inc.
Industry-exclusive Tune Rite ® on-demand HVAC “assistant ”. Measures O2, CO (w/NOx filter), stack/air temperature and draft/pressure. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Standard 3 year O2 sensor. Compatible with the Bacharach Reporting App... [See More]
- Gas Types: Combustible; CO (0 to 4,000 ppm); O2 (20.9%)
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Measurement Type: %Volume; Trace
from Sensidyne, LP
The Model 7100 Multi Channel Digital Controller accepts 4-20mA, RS-485 or direct sensor inputs for display, alarm, and output on RS-485. There are three common alarm relays with a separate horn relay. A large backlit LCD display is provided. Power supply and input modules must be ordered separately. [See More]
- Gas Types: Toxic; Combustible
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from Linde North America, Inc.
The G-TECTA ™ 4G is a rugged, compact and easy to use 4-gas instrument with full data management and operator functionality. With 14 sensor options, one button operation and a robust water and dust resistant ergonomic casing, G-TECTA 4G is the ideal confined space entry monitor. The instrument... [See More]
- Gas Types: Toxic; Combustible; NH3; CO2; CO; Hydrocarbons; H2; H2S; Methane (CH4) / Natural Gas; O3; SO2
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Number of Gases Monitored: Multi
from Cubic Sensor and Instrument Co.,Ltd.
Handheld biogas analyzer Gasboard-3200Plus is handheld type analyzer, mainly used for measuring biogas compositions of CH4, CO2, O2, H2S and optional H2, CO gases, with high accuracy, stable performance and easy carrying features, widely used in anaerobic digestion biogas, waste water treatment... [See More]
- Gas Types: Combustible; CO2 (0-50%); CO (0-2000ppm); Hydrocarbons (0-100%); H2 (0-2000ppm); H2S (0-9999ppm); Methane (CH4) / Natural Gas; O2 (0-25%)
- Mounting Type: Handheld; Portable
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared
from Eagle Eye Power Solutions, LLC
The Eagle Eye HGD-2000 Hydrogen Gas Detector allows the user to monitor hydrogen gas buildup in storage room and facilities that house batteries - including forklifts, golf carts, backup power supplies, and battery charging stations. Lead-acid batteries on charge emit hydrogen gas after reaching the... [See More]
- Gas Types: Combustible; H2; Hg; Methane (CH4) / Natural Gas; O2
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor; Analyzer
- Number of Gases Monitored: Single; Multi
from Emerson Automation Solutions – Rosemount
The M2B single channel universal transmitter is designed for the most demanding, industrial applications that require a local, full-featured transmitter interface but do not require a character display. The Millennium II BASIC includes bright LED indicators for Power/Alarm/Fault conditions with an... [See More]
- Gas Types: Toxic; Combustible; NH3; H2S; O2
- Sensor Technology: Catalytic; Electrochemical; Infrared; Semiconductor
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
from Nova Analytical Systems Inc.
The Nova 350 Series Portable Flue Gas Analyzer has been designed for accuracy, reliability, ease of use and ease of service. It uses customer replaceable sensors which respond quickly to the Oxygen (O2) and combustibles present in the flue gas sample. The sensor life expectancy is between 2 and 3... [See More]
- Gas Types: Combustible; O2 (0-25%) (Combustibles, 0-10%)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Catalytic; Electrochemical
from Owlstone Inc.
FAIMS is a high speed, gas phase ion separation technique. When interfaced to a Mass Spectrometer, the FAIMS chip provides an additional separation stage, making it suitable for a applications ranging from drug development to proteomics. The FAIMS ion filter is orthogonal to both LC and MS, so has... [See More]
- Gas Types: Toxic; Combustible; Hydrocarbons; Methane (CH4) / Natural Gas (User Defined)
- Mounting Type: Portable
- Instrument Type: Detector
- Sensor Technology: PID
from H2scan, Corp.
H2scan's HY-ALERTA ™ 600B/610B Fixed Area Hydrogen Monitors will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen's low... [See More]
- Gas Types: Combustible; H2 (0.4% to 5.0%)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Hydrogen-Specific Sensor Technology
from Siemens Process Instrumentation
ULTRAMAT/OXYMAT 6 | for IR-active components and oxygen. Best combination for IR-active components and oxygen. The ULTRAMAT/OXYMAT 6 combines the features of the ULTRAMAT 6 and the OXYMAT 6 in one 19" analyzer. Most frequently used for demanding applications, the ULTRAMAT/OXYMAT 6 must meet high... [See More]
- Gas Types: Toxic; Combustible; CO2; CO; Hydrocarbons; Methane (CH4) / Natural Gas; NO; O2; SO2
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Application: Continuous Emissions Monitoring; Process Gas
from Roscid Technologies
The Model H2S-Tracer is simple, accurate and very economic measurement of Hydrogen Sulfide at ppm levels. [See More]
- Gas Types: Toxic; Combustible; H2S
- Number of Gases Monitored: Single
- Instrument Type: Analyzer
- Measurement Type: Trace
from Conspec Controls Inc.
CONSPEC's Single Channel Controllers are single point monitoring and control processors, which are housed in a NEMA 4-4X weatherproof non-metallic enclosure and are designed to monitor and display any voltage or current input signal from any instrument, including CONSPEC's EZ-CAL Toxic and... [See More]
- Gas Types: Toxic; Combustible; Aerosols; NH3 (0-50, 100, 200, 500ppm); AsH3; Br2 (0-10ppm); CO2 (0-2000ppm, 10000ppm 0-2%, 0-5%, 0-100%); CO (0-50, 100, 200, 500, 1000, 10000, 50000); Cl2 (0-10, 20ppm); ClO2 (0-5 ppm); B2H6; F; GeH4; Refrigerants; Hydrocarbons (0-100% LEL or 0-100% Vol.); H2 (0-2000, 10,000ppm 0-4%); HCl (0-25, 100, 150ppm); HCN; HF; H2Se; H2S (0-25, 50, 100, 200ppm); NO (0-50, 100ppm); NO2 (0-20ppm); O2 (0-25, 100%); O3 (0-2, 5ppm); PH3; SiH4; SO2 (0-10, 100, 1000, 2000ppm); SF6
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from Honeywell Analytics, Inc.
Centralize display and alarm functions with a flexible 16-64 channel controller that adapts and expands to your requirements, as a standalone solution or networkable device. The HA72 controller is a flexible, scaleable gas controller that works the way you need it to. Input/Output modules allow for... [See More]
- Gas Types: Toxic; Combustible
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from Pem-Tech, Inc.
PT800-AI is an addressable four channel analog input module with 3 discrete outputs. Communication adheres to industry standard RS-485 Modbus RTU protocol. DC power input is protected against reverse polarity. Modules are DIN Rail mounted and share a common bus when stacked together. Each module... [See More]
- Gas Types: Toxic; Combustible; NH3 (optional feature); CO (optional feature); Cl2 (optional feature); ClO2 (optional feature); Hydrocarbons (optional feature) (0-100% LEL); H2 (optional feature); HCl (optional feature); HCN (optional feature); H2S (optional feature); NO (optional feature); NO2 (optional feature); O2 (optional feature) (0-25% Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Industrial Scientific Corporation
Get the simple, reliable gas detection you need with the Ventis MX4, a four-gas monitor with the portability and size of a single-gas monitor. Designed to be extremely rugged yet lightweight and easy to wear, the Ventis MX4 eliminates the need for extra monitors and transitions seamlessly from... [See More]
- Gas Types: Toxic; Combustible; CO (0-1000 ppm); Hydrocarbons (Methane, pentane 0-100% LEL;Methane 0-5%); H2; H2S (0-500 ppm); Methane (CH4) / Natural Gas (Methane, pentane 0-100% LEL;Methane 0-5%); NO2 (0-150 ppm); O2 (0-30% Volume); SO2
- Mounting Type: Handheld; Portable
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Det-Tronics
The Det-Tronics Eagle Quantum Premier (EQP) Fire and Gas Detection/Releasing System serves the monitoring and protection functions in hazardous areas. This microprocessor based module performs communication and control functions of the fire and gas safety system. NEW! Ethernet Interface Board option... [See More]
- Gas Types: Combustible
- Application: Ambient Air Monitoring
- Instrument Type: Analyzer
- Number Channels: 8
from Bacharach, Inc.
Measures up to 7 gases simultaneously (minimum O2 and CO), including NOx, SOx and combustibles. Sensors are easily replaced or upgraded in the field. Rugged suitcase design with large, easy-to-read display. Built-in printer for instant traceability and record-keeping. The ECA 450 is an industrial... [See More]
- Gas Types: Combustible; CO2 (0 to Fuel Dependent Maximum); CO (0 to 4000 ppm (Hydrogen Compensated), 4001 to 80000 ppm, 0 to 99999 ppm); NO (0 to 3500 ppm, 0 to 14900 ppm); NO2 (0 to 500 ppm, 0 to 2100 ppm); NxOx (0 to 4000 ppm, 0 to 17000 ppm); SO2 (0 to 4000 ppm)
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Measurement Type: %Volume; Trace
from Sensidyne, LP
NEMA 4X UL Listed Enclosure. Accepts Two 4-20 mA Inputs. Graphic Backlit LCD Display. Common Alarm Relays (2). Discrete LED Alarm. Annunciation (6). Optional Discrete. Alarm Relays (6). Optional 4-20 mA Output [See More]
- Gas Types: Toxic; Combustible
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from Cubic Sensor and Instrument Co.,Ltd.
Combustion analyzers are available for HVAC, boiler, industrial and flue gas monitoring applications. A wide range of units is available, with most offering CO2, CO, O2 with advanced NDIR and long life time ECD technology. A new portable type in reliable and accurate combustion analysis with its... [See More]
- Gas Types: Combustible; CO2 (0-25%); CO (0-5000ppm); O2 (0-25%)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared
from Emerson Automation Solutions – Rosemount
The M22 dual channel universal transmitter has been engineered from the ground-up to include the innovative features that engineers and operators in the field demand, while providing rock solid day-to-day operation, even in the most extreme conditions. With the dual channel option you can cover more... [See More]
- Gas Types: Toxic; Combustible; NH3; H2S; O2
- Sensor Technology: Catalytic; Electrochemical; Infrared; Semiconductor
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
from Nova Analytical Systems Inc.
The Nova 350 Series Portable Flue Gas Analyzer has been designed for accuracy, reliability, ease of use and ease of service. It uses customer replaceable sensors which respond quickly to the Oxygen (O2) and combustibles present in the flue gas sample. The sensor life expectancy is between 2 and 3... [See More]
- Gas Types: Combustible; O2 (0-25%) (Combustibles, 0-10%)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Catalytic; Electrochemical
from H2scan, Corp.
H2scan recognizes the importance of detecting and locating hydrogen leaks as quickly as possible. H2scan's HY-ALERTA ™ 500 Handheld Hydrogen Leak Detector is the industry's most versatile, portable hydrogen leak detector able to respond to the widest range of hydrogen gas concentrations... [See More]
- Gas Types: Combustible; H2 (15 ppm to 100% hydrogen)
- Mounting Type: Handheld; Portable
- Instrument Type: Detector
- Sensor Technology: Semiconductor
from Siemens Process Instrumentation
The SIPROCESS UV600 is an extractive UV gas analyzer that can measure up to three components simultaneously. SIPROCESS UV600 with state of-the-art electronics and software, has the interfaces required for remote monitoring from a network as well as connecting to a process control system. The... [See More]
- Gas Types: Toxic; Combustible; H2S (0 1 000 ppmv); NO (0 ... 1 000 ppmv); NO2 (0 ... 1 000 ppmv); SO2 (0 ... 1 000 ppmv)
- Sensor Technology: PID
- Instrument Type: Analyzer
- Number of Gases Monitored: Multi
from Roscid Technologies
The Model H2Trans is simple, accurate and economic measurement of Hydrogen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument. Optional 1/2 G Ex ia IIC T4 (ATEX). Specifications. Measuring range. ppm : 100 – 100000 ppm H2. [See More]
- Gas Types: Combustible; H2 (100-100000ppm)
- Sensor Technology: Electrochemical
- Instrument Type: Analyzer
- Number of Gases Monitored: Single
from Conspec Controls Inc.
CONSPEC Controls Multi-Channel Controller is a microprocessor-based multi-analog input controller. The P2260 was designed to be an independent stand-alone controller but can integrate into any type of data acquisition system. The Controller can provide up to sixteen channels of remote monitoring and... [See More]
- Gas Types: Combustible; Aerosols; NH3; AsH3; Br2; CO2; CO; Cl2; ClO2; B2H6; F; GeH4; Refrigerants; Hydrocarbons; H2; HCl; HCN; HF; H2Se; H2S; NO; NO2; O2; O3; PH3; SiH4; SO2; SF6
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
from Honeywell Analytics, Inc.
The GM-JR is an innovative stand-alone or "signal feed-through" readout/alarm unit that can be configured in a variety of ways to solve many refrigeration-gas concentration and alarm needs at an affordable price. The readout provides a calibrated 20-segment LED bargraph, alarm and fault LEDs, plus a... [See More]
- Gas Types: Combustible
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Electrochemical
from Pem-Tech, Inc.
Model PT900-12FG is a microprocessor-based modular controller that provides up to 12 channels of continuous gas detection. The controller is housed in a Nema 4X weatherproof enclosure. Each PT900 Series toxic or combustible gas control module can be interfaced with Pem-Tech's gas sensors. The... [See More]
- Gas Types: Combustible; Cl2 (optional feature); Hydrocarbons (optional feature) (% LEL); H2Se (optional feature); H2S (optional feature); O2 (optional feature) (Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Industrial Scientific Corporation
The Ventis Pro5 multi-gas monitor is the most flexible connected monitor on the market, giving you the power to manage worker safety anytime, anywhere - even in the most remote settings. Wireless connectivity in the Ventis Pro5 connects workers to live monitoring software via cellular, wi-fi,... [See More]
- Gas Types: Toxic; Combustible; CO (0-1000 ppm); Cl2; Hydrocarbons (Methane, pentane 0-100% LEL;Methane 0-5%); H2; H2S (0-500 ppm); Methane (CH4) / Natural Gas (Methane, pentane 0-100% LEL;Methane 0-5%); NO2 (0-150 ppm); O2 (0-30% Volume); PH3; SO2
- Mounting Type: Handheld; Portable
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Det-Tronics
Det-Tronics offers a line-of-sight gas detector for measurement of hydrocarbon vapors in the lower explosive limit per distance (LFL-meter) detection range. Ideally suited for open path gas detection applications in oil, gas, and petrochemical facilities, the Open Path Eclipse provides a number of... [See More]
- Gas Types: Combustible; Hydrocarbons (0-5 % LFL-Meters); Methane (CH4) / Natural Gas (Meth / But / Propane)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Infrared
from Bacharach, Inc.
Measures up to 4 gases simultaneously (minimum O2 and CO), including NOx using NO only or NO + NO2. Exclusive B-Smart ® pre-calibrated sensors for easy field replacement or upgrades. 3.5 inch color LCD with customizable layout and zoom for viewing the readings you want to see. Ten standard fuels... [See More]
- Gas Types: Combustible; CO2 (0 to Fuel Dependent Maximum); CO (0 to 9999 ppm); NO (0 to 9999 ppm); NO2 (0 to 9999 ppm); NxOx (0 to 9999 ppm, 0 to 3500 ppm); SO2 (0 to 9999 ppm)
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Measurement Type: Trace
from Sensidyne, LP
Plug-in SensAlert ® sensors automatically configure the. system for the gas type, range, engineering units and alarm. levels. User configurable alarms and serial address. With active. temperature compensation, the sensors are virtually drift-free,. and maintenance is significantly reduced. [See More]
- Gas Types: Toxic; Combustible
- Mounting Type: Fixed
- Instrument Type: Monitor
- Number of Gases Monitored: Multi
from Cubic Sensor and Instrument Co.,Ltd.
Online flue gas analyzer Gasboard-3000UV is designed with advanced UV DOAS technology for ultra-low SO2,NO,O2 measurement, this model is an ideal solution with CE certification for pollution emission monitoring in boiler, power, cement, incinerator, furnace, steel and other industrial applications. [See More]
- Gas Types: Combustible; NO (0-100mg/m); O2 (0-25%); SO2 (0-100mg/m)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; UV DOAS
from Emerson Automation Solutions – Rosemount
The M21 single channel universal transmitter has been engineered from the ground-up to include the innovative features that managers and operators in the field demand, while providing rock solid day-to-day operation, even in the most extreme conditions. The Millennium II redefines what you expect... [See More]
- Gas Types: Toxic; Combustible; NH3; H2S; O2
- Sensor Technology: Catalytic; Electrochemical; Infrared; Semiconductor
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
from Nova Analytical Systems Inc.
The Nova Model 7900P Series Heat Treat analyzers utilize a three channel high stability infrared detector for the simultaneous measurement of CO, CO2, and CH4 in exothermic or endothermic gas mixtures. In addition, the analyzer can be supplied with a fully compensated thermal conductivity cell for... [See More]
- Gas Types: Toxic; Combustible; CO2 (0-100%); CO (0-100%); Hydrocarbons (Methane, 0-100%)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared
from H2scan, Corp.
H2scan's HY-OPTIMA ™ 1700 series in-line, real time hydrogen-specific process analyzers are designed for ease of use, interface flexibility and true process control. The HY-OPTIMA ™ 1700 series is an ATEX certified Intrinsically Safe (IS) device that incorporates our patented solid-state... [See More]
- Gas Types: Combustible; H2 (0.5% to 100%)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Semiconductor; Solid State Sensor
from Siemens Process Instrumentation
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications. One or two signals from up to three measuring points are processed simultaneously by the central analyzer unit. The sensors are designed for... [See More]
- Gas Types: Toxic; Combustible; NH3; CO2; CO; HCl; HF; O2; Water Vapor
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Application: Process Gas
from Roscid Technologies
The Model O2Tracer-M is simple to use, accurate and very economical. Features. Oxygen Transmitter with a display. 4 – 20 mA Loop Powered two wire. Two Wire Process Oxygen analyzer. Calibration : performed at Ambient O2. Accuracy : +/- 2% FSD T= const. +/- 5% FSD 0 >T >50 °C. Response... [See More]
- Gas Types: Combustible; O2 (0-25%)
- Sensor Technology: Electrochemical
- Instrument Type: Analyzer
- Number of Gases Monitored: Single
from Honeywell Analytics, Inc.
Acts as the nerve center of a modular gas detection network by providing continuous monitoring of up to 96 sensors. The Manning AirAlertTM 96d multichannel gas monitoring system is designed for installation and operational simplicity for continuous monitoring and control of toxic gases, combustible... [See More]
- Gas Types: Combustible; CO2; CO; Cl2; H2; O2
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Electrochemical
from Pem-Tech, Inc.
Model PT900-12R is a standard 19" rack assembly with up to 12 control modules to serve as a gas monitor and controller for Pem-Tech's remote mounted gas sensors. The modular designed 12 channel gas monitor is rated Nema 1 for safe area use. The control modules provide digital display, discrete... [See More]
- Gas Types: Combustible; Cl2 (optional feature); Hydrocarbons (optional feature) (% LEL); H2Se (optional feature); H2S (optional feature); O2 (optional feature) (Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Det-Tronics
The PointWatch Eclipse ® Model PIRECL IR Hydrocarbon Gas Detector is our most rugged stainless steel, point infrared gas detector. It is approved to be factory calibrated to detect methane, propane, ethylene, and butane. The Eclipse goes above gas detection to life-safety control. Thanks to its... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LEL Standard); Methane (CH4) / Natural Gas (Meth / But / Propane 0 to 100%LFL)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Infrared
from Bacharach, Inc.
Complete kit for measuring all attributes of combustion. The Bacharach Mechanical Oil/Gas Testing Kits are complete kits that have HVAC technicians and contractors in mind. They include everything needed to perform a comprehensive combustion test, including the Fyrite ® Classic (0-20% CO2), MZF... [See More]
- Gas Types: Combustible; CO2 (0-60%); O2 (0-60%)
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Measurement Type: %Volume
from Sensidyne, LP
Smart Sensor Technology enables SensAlertPlus to automatically recognize and configure to the gas type and range of the sensor, using the latest calibration data. The Predictive Sensor Failure (PSF) function provides warning of approaching sensor end-of-life. Non-volatile memory stores calibration... [See More]
- Gas Types: Toxic; Combustible; CO2 (0-5%Volume); CO (0-500ppm); Cl2 (0-10ppm); Hydrocarbons (0-100%LEL); H2 (0-1000ppm); HCl (0-20); HCN (0-20ppm); HF (0-20); H2S (0-100ppm); O2 (0-25%Volume); SO2 (0-20ppm)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared
from Cubic Sensor and Instrument Co.,Ltd.
Analyzers for professionals. Excellent portable flue gas analyzer for analyzing various measuring variables like SO2,NO,CO,CO2,O2 based on unique micro-flow NDIR and long life time technology. Cubic-Ruiyi is a leader in the field of portable, stationary measurement solutions. Stable performance and... [See More]
- Gas Types: Combustible; CO2 (0-25%); CO (0-5000ppm); NO (0-2000ppm); O2 (0-25%); SO2 (0-2000ppm)
- Mounting Type: Portable
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-300 ppm, 0-30%); CO2 (0-10 ppm, 0-100%); CO (0-10 ppm, 0-100%); Methane (CH4) / Natural Gas (0-500 ppm, 0-100%); NO (0-250 ppm, 0-100%); NxOx (0-2000 ppm); O2 (0-100%); SO2 (0-130 ppm, 0-80%); SF6 (0-20 ppm, 0-2%); Water Vapor (0-1000 ppm, 0-3%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
from Nova Analytical Systems Inc.
The Nova 430DPL analyzer utilizes a temperature-controlled T/C cell for the detection of H2 in process gas. This cell produces a small millivoltage output which is directly proportional to the H2 detected. This output is then amplified and displayed on a digital readout meter and is also available... [See More]
- Gas Types: Combustible; H2 (0-2% to 0-100%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Thermal Conductivity Cell
from Roscid Technologies
4 – 20 mA Loop Powered two wire Oxygen Transmitter. Two Wire Process Oxygen analyzer. The Model OxyTrans LC is simple, accurate and economic measurement of Oxygen at trace (ppm) levels and % levels. Four User Specific Measuring Range Offered. The OxyTrans LC is offered in 4 different measuring... [See More]
- Gas Types: Combustible; O2 (0-10000 ppm 0-25%)
- Sensor Technology: Electrochemical
- Instrument Type: Analyzer
- Number of Gases Monitored: Single
from Honeywell Analytics, Inc.
World renowned infrared open path flammable gas detector offering unrivalled performance and sensitivity. The Searchline Excel is the World ’s best selling infrared open path gas detector with over 6,000 units installed in challenging applications throughout industry. From the Arctic Circle to... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LEL)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Infrared
from Pem-Tech, Inc.
Model PT920-16SS is a microprocessor-based modular controller that provides up to sixteen (16) channels of continuous gas detection. The controller is housed in a Nema 4X Stainless Steel enclosure. Each PT920 Series toxic or combustible gas control module can be interfaced with Pem-Tech ’s gas... [See More]
- Gas Types: Combustible; Cl2 (optional feature); Hydrocarbons (optional feature) (% LEL); H2S (optional feature); O2 (optional feature) (Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical
from Det-Tronics
The PointWatch PIR9400 Infrared detector offers the lowest cost of ownership for detection of hydrocarbon combustible gases and vapors. It is virtually maintenance free and will detect gas concentrations within the 0 to 100% LFL range with a corresponding 4-20 mA output signal. Benefits include... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LFL Standard); Methane (CH4) / Natural Gas (Meth / But / Propane 0 to 100%LFL)
- Mounting Type: Fixed
- Instrument Type: Detector
- Sensor Technology: Infrared
from Bacharach, Inc.
Measure O2 and CO2 simply, accurately and quickly. Multiple ranges available for use in a wide variety of applications. Field-replaceable, easy-to-change fluid for keeping the instrument in the field. The Fyrite ® Classic is a tried-and-true instrument for measuring oxygen and carbon dioxide. [See More]
- Gas Types: Combustible; CO2 (0-60%); O2 (0-60%)
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Measurement Type: %Volume
from Cubic Sensor and Instrument Co.,Ltd.
Laser raman gas analyze?r LRGA-6000 is an advanced equipment that can online measure all the gas composition of most fuel gases, including biogas, syngas, natural gas, producer gas and so on. And with the unique advantages of no consumables, higher accuracy, long lifetime, and no routine calibration... [See More]
- Gas Types: Combustible; NH3; CO2; CO; Hydrocarbons; H2; H2S (optional feature); Methane (CH4) / Natural Gas; O2; Water Vapor (optional feature)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Laser Raman
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-2000 ppm, 0-100%); CO2 (0-5 ppm, 0-100%); CO (0-10 ppm, 0-100%); Cl2 (0-1000, 0-100%); Hydrocarbons; H2 (0-100%); HCN (0-100 ppm, 0-40%); Methane (CH4) / Natural Gas (0-300 ppm, 0-100%); NxOx (0-200 ppm, 0-100%); O2 (0-100%); SO2 (0-25 ppm, 0-80%); SF6 (0-5 ppm, 0-2%); Water Vapor (0-1000 ppm, 0-10%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
from Nova Analytical Systems Inc.
The Nova 430DPL analyzer utilizes a temperature-controlled T/C cell for the detection of H2 in process gas. This cell produces a small millivoltage output which is directly proportional to the H2 detected. This output is then amplified and displayed on a digital readout meter and is also available... [See More]
- Gas Types: Combustible; H2 (0-2% to 0-100%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Thermal Conductivity Cell
from Roscid Technologies
The Model O2Tracer is simple, accurate and very economic measurement of Oxygen at % levels. One User specific measuring range. the unit will offer with different ranges between 0 – 100% of oxygen. Typical range is 0- 25%. Sensor. The O2Tracer uses a special fuel cell to measure the oxygen... [See More]
- Gas Types: Combustible; O2 (0-100%)
- Sensor Technology: Electrochemical
- Instrument Type: Analyzer
- Number of Gases Monitored: Single
from Honeywell Analytics, Inc.
Take advantage of HART communication added to the proven performance of the market-leading hydrocarbon point infrared gas detector. With over 40 years experience in the design, manufacture, installation and maintenance of point infrared gas detection, Honeywell Analytics currently has a worldwide... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% LEL)
- Mounting Type: Fixed
- Instrument Type: Detector; Monitor
- Sensor Technology: Infrared
from Pem-Tech, Inc.
Model PT2008 Monitor interfaces with up to 64 Ultra 1000 series sensors, toxic and combustibles over wireless network. Operating frequency is 900 MHz. Displays sensor gas reading and status like sensor calibration, fault and battery voltage. Also available with real time data logging. 117VAC or DC... [See More]
- Gas Types: Toxic; Combustible; NH3 (optional feature); CO (optional feature); Cl2 (optional feature); ClO2 (optional feature); Hydrocarbons (optional feature) (0-100% LEL); H2 (optional feature); HCl (optional feature); HCN (optional feature); H2S (optional feature); NO (optional feature); NO2 (optional feature); O2 (optional feature) (0-25% Deficiency); SO2 (optional feature)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Catalytic; Electrochemical; Infrared
from Det-Tronics
The model PIRVOL IR gas monitor is designed to monitor hydrocarbon vapors in the range of 0-100% by volume, and is ideally suited for oil and gas wellhead mud-logging, hydrocarbon processing, and other extractive sampling applications. The PIRVOL provides superior life-cycle costs over destructive... [See More]
- Gas Types: Combustible; Hydrocarbons (0-100% By Volume Methane); Methane (CH4) / Natural Gas (0-100% By Volume Methane)
- Mounting Type: Fixed
- Instrument Type: Monitor
- Sensor Technology: Infrared
from Bacharach, Inc.
4.3 inch color touch screen with enhanced viewing options to easily see readings. Bluetooth ® wireless technology allows for live streaming of data to any phone, PC or tablet. Rugged all-in-one probe connection for durability and easy setup. Optional NOx and SO2 sensors with Viton probe tubing... [See More]
- Gas Types: Combustible; CO (0 to 40,000 ppm); NO (0 to 3,000 ppm); NO2 (0 to 500 ppm); O2 (0 to 20.9%); SO2 (0 to 5,000 ppm)
- Number of Gases Monitored: Multi
- Instrument Type: Analyzer
- Measurement Type: %Volume; Trace
from Cubic Sensor and Instrument Co.,Ltd.
Online syngas analyzer Gasboard-3100 is a stationary analyzer with standard 19'' 3U rack enclosure, easy to be integrated inside industrial system. It is able to online continuously measure volume concentration of CO, CO2, CH4, H2 , O2 , CnHm, C2H2 , C2H4 simultaneously, and calculate gas heating... [See More]
- Gas Types: Combustible; CO2 (0-100%); CO (0-100%); Hydrocarbons (0-100%); H2 (0-100%); Methane (CH4) / Natural Gas; O2 (0-25%) (0-20%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 ppm, 0-30%); CO2 (0-5 ppm, 0-100%); CO (0-10 ppm, 0-100%); Methane (CH4) / Natural Gas (0-9000 ppm); NO (0-150 ppm, 0-100%); NxOx (0-200 ppm, 0-100%); O2 (0-100%); SO2 (0-25 ppm, 0-80%); SF6 (0-5 ppm, 0-2%); Water Vapor (0-1000 ppm, 0-10%)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
from Nova Analytical Systems Inc.
The Nova 470 Series CH4 analyzers utilize a simple and reliable microprocessor-based non-dispersive infrared detector specific to CH4. The detector pulses an infrared beam of light through the sample tube, without the need for a mechanical chopper. In operation, the internal sample pump draws the... [See More]
- Gas Types: Combustible; Hydrocarbons (Methane, 0-100%, 0-5000 ppm)
- Mounting Type: Fixed
- Instrument Type: Analyzer
- Sensor Technology: Infrared