CE Marking Multiconductor Cables
from ifm efector inc.
For the reliable signal transmission in AS-i networks. Connection of components using insulation displacement technology. Reverse polarity protection due to special shape. High protection rating for the requirements of harsh industrial environments. From May 1st 2025, products produced in EU and... [See More]
- Standards / Certifications: CE Marking
- Rated Voltage: 0.0265 to 0.0316
- Product Category: Cable; Cable Assembly
- Rated Temperature: -40 to 85
from ifm efector inc.
For the reliable external 24 V power supply in AS-i networks. Connection of components using insulation displacement technology. Reverse polarity protection due to special shape. High protection rating for the requirements of harsh industrial environments. From May 1st 2025, products produced in EU... [See More]
- Standards / Certifications: CE Marking
- Rated Voltage: 0.0240
- Product Category: Cable; Cable Assembly
- Rated Temperature: -40 to 85
from ifm efector inc.
For the reliable signal transmission in AS-i networks. Connection of components using insulation displacement technology. Reverse polarity protection due to special shape. High protection rating for the requirements of harsh industrial environments. Wide operating temperature range. From May 1st... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Rated Voltage: 0.2300
- Product Category: Cable; Cable Assembly
- Rated Temperature: -40 to 105
from Automation24, Inc.
#214;LFLEX ® 190 12G0.5 20/12C is a multi-conductor cable, Highly oil-coolant-and solvent-resistant thermoplastic polymer jacket for control and power applications in an industrial environment. It is designed for use in all electrical equipment under dry/damp and wet conditions. Conductor size... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL, RU, FP 2015, CSA, CE, RoHS
- Number of Conductors: 12
- Product Category: Cable Assembly
- Rated Voltage: 0.6000
from Hi-Tech Controls, Inc.
400 Hz cables are used to supply power to aircraft (on-board power), data processing systems, radar stations, radio stations, etc. For safety reasons, 400 Hz cables are used to connect data processing systems, radar systems and communications systems to uninterruptible power supplies. Such power... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 1 to 20
- Product Category: Cable
- Rated Voltage: 4
from General Cable
With its industry-leading and diverse product offering, General Cable is positioned to meet the challenges faced by today ’s industrial automation customers. Our customers include automotive and consumer products manufacturers, plants and facilities management, industrial equipment... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 100
- Product Category: Cable
- Rated Voltage: 0.6000 to 8
from igus® inc.
1.Fine wire stranded conductor. 2.Pairs twisted together with short pitch. 3. gusset filled, pressure extruded. 4. Highly flexible braided copper shield. 5. Pressure extruded, halogen-free PUR blend. Classification of the Chainflex ® cable: Class 6.6.4.1. Requirements: 6: Cables for continuous... [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 12 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
BiHF-J is a multi-conductor, silicone insulated control cable with a reddish brown silicone jacket. Silicone cables are recommended for use where high temperatures. rapidly cause other cables to deteriorate. Recommended applications include foundries, steel mills and glass factories and other high... [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.5000
from ifm electronic gmbh
Reliable distribution of the AS-i voltage or the external 24 V supply. Hygienic design for the requirements of the food and beverage industry. Easy and quick connection due to insulation displacement technology. Resistant to high-pressure cleaning with aggressive cleaning agents. For applications in... [See More]
- Standards / Certifications: CE Marking
- Rated Amperage: 8
- Product Category: Cable Assembly
- Rated Temperature: 0.0 to 60
from Alpha Wire
Alpha Wire offers 50-, 75-, 93-, and 100-ohm coaxial, twinaxial, and triaxial cables in a wide range of insulation and jacket materials and rated for UL, CSA and military specifications. We now also provide non-magnetic coaxial cable options 9849 and 9851, which provide better signal transmission... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -70 to 150
- Rated Voltage: 0.0300
- North American: 36
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 3
- Rated Temperature: -40 to 90
from LAPP
The Lapp Group ’s new I 304 is an instrumentation cable rated for UL CMG, PLTC & ITC and CSA CMG. It is available with individually shielded pairs and triads and has an overall foil shield. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 32
- Product Category: Cable
- Rated Voltage: 0.3000
from Mueller Group, Inc. (The)
H)05Z1Z1-F is a VDE approved, halogen-free, light-duty, flexible, black jacketed multi-conductor 500V. European cord. Recommended when halogen-free, low-smoke and corrosive gas properties are required in case of fire. Applications include connecting electrical appliances under medium mechanical... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from PCB Piezotronics, Inc.
9-socket plug (for DC triaxial accels) **Requires special tooling for assembly – No sales except PCB locations that have the tooling and procedures**. (mates to the GJ connector) [See More]
- Standards / Certifications: RoHS; CE Marking
- Rated Temperature: -35 to 135
- Product Category: Cable Assembly
from Automation24, Inc.
#214;LFLEX ® 190 CY 12G1.0 18/12C is a multi-conductor cable, with a highly oil-coolant and solvent-resistant thermoplastic polymer jacket, for control and power applications in an industrial environment. It is designed for use in all electrical equipment under dry/damp and wet conditions. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL, RU, FP 2015, CSA, CE, RoHS
- Number of Conductors: 12
- Product Category: Cable Assembly
- Rated Voltage: 0.6000
from Hi-Tech Controls, Inc.
400 Hz cables are used to supply power to aircraft (on-board power), data processing systems, radar stations, radio stations, etc. For safety reasons, 400 Hz cables are used to connect data processing systems, radar systems and communications systems to uninterruptible power supplies. Such power... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 7 to 31
- Product Category: Cable
- Rated Voltage: 4
from General Cable
From exploration and extraction to production and refining, our state-of-the-art Oil, Gas and Petrochemical (OGP) cable solutions are designed to successfully address the upstream, midstream and downstream application challenges you face in this demanding market. Our effective cable designs help you... [See More]
- Standards / Certifications: CSA Mark; CE Marking; IEC; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 1 to 10
- Product Category: Cable
- Rated Voltage: 0.6000 to 15
from igus® inc.
1. Fine strand copper wire conductor. 2. Core element with tensile strength. 3. Braiding in layers with extremely short pitch. 4. Gusset-filling, pressure extruded. Classification of the Chainflex ® cable: Class 4.3.3. Requirements: 4: Cables with special structure for continuous movement in... [See More]
- Standards / Certifications: CE Marking; VDE
- Number of Conductors: 12 to 25
- Product Category: Cable
- Rated Voltage: 0.3000
from SAB North America
BiHFP-J is a multi-conductor, silicone insulated control cable with silicone jacket and protective steel braid. Recommended for use where high temperatures,. mechanical abuse and abrasion rapidly cause other cables to deteriorate. It is a flexible, high temperature alternative to teflon cables where... [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.5000
from Alpha Wire
Get control of your communication and control applications. Our line-up of standard communication and control cables gives you maximum choice and fewer tradeoffs. By offering you a comprehensive collection of insulation/jacketing materials, shielding options, and conductor counts, you can easily... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -20 to 80
- Rated Voltage: 0.2000
- North American: 28
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 3
- Rated Temperature: -40 to 90
from LAPP
ÖLFLEX ® CHAIN 808 P is a flexible multi-conductor cable designed for basic continuous flexing applications. ÖLFLEX ® CHAIN 808 CP is a shielded version available with an overall tinned copper braid. This is recommended when electrical interference needs to be suppressed. [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Mueller Group, Inc. (The)
A07RN-F is a VDE approved and Authorized national, heavy-duty, flexible, rubber insulated, black neoprene jacketed multi-conductor European cord. Recommended for use in electrical equipment under medium mechanical stress in a dry or damp indoor or outdoor environment. Commonly used on equipment in... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.4500 to 0.7500
- Product Category: Cable
from PCB Piezotronics, Inc.
PTFE cable, 2-conductor twisted pair with/drain, shielded [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2
- Product Category: Cable Assembly
- Rated Temperature: -67.78 to 200
from Automation24, Inc.
UNITRONIC ® 300 20/4C is a rugged, multi-conductor, low voltage control and signal cable for internal and external wiring of OEM equipment for industrial applications. The jacket is very oil resistant and is pressure-extruded for improved flexibility and easier installation. Cross-sectional... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); cULus, RU, FP 2015, CSA, CE, RoHS
- Number of Conductors: 4
- Product Category: Cable Assembly
- Rated Voltage: 0.3000
from Hi-Tech Controls, Inc.
Heavy duty rubber-outer jacket flexible cables are suited for use for medium mechanical stress in dry, damp and wet areas as well as in open air and in agriculture plants. They are used for equipment in industry works such as boilers, heating plates, hand lamps, electric tools such as drills,... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Number of Conductors: 3 to 37
- Product Category: Cable
- Rated Voltage: 2.5
from igus® inc.
1. Highly flexible special conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filling, pressure extruded. 5. Highly flexible braided copper shield. 6. Pressure extruded, PUR blend. Classification of the Chainflex ® cable: Class... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 4 to 48
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
CAN-Bus according to ISO 11898. The CAN-Bus cable is applied. for the exchange of digital information, control apparatus net. (CAN) for faster data transmission/exchange. Application in. power supply cable tracks, highly flexible data cables. [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3500
from Alpha Wire
Get control of your communication and control applications. Our line-up of standard communication and control cables gives you maximum choice and fewer tradeoffs. By offering you a comprehensive collection of insulation/jacketing materials, shielding options, and conductor counts, you can easily... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -20 to 60
- Rated Voltage: 0.6000
- North American: 16
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 4
- Rated Temperature: -40 to 90
from LAPP
ÖLFLEX ® CHAIN 808 P is a flexible multi-conductor cable designed for basic continuous flexing applications. ÖLFLEX ® CHAIN 808 CP is a shielded version available with an overall tinned copper braid. This is recommended when electrical interference needs to be suppressed. [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Mueller Group, Inc. (The)
DATA-CP is a VDE approved, flexible, oil-resistant, overall shielded, polyurethane, multi-conductor European data transmission cable. For use in flexible or stationary applications under high mechanical stress with free movement without any tensile stress, loads or forced movement in dry, moist and... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.2500
- Product Category: Cable
from Automation24, Inc.
UNITRONIC ® 300 22/4C is a rugged, multi-conductor, low voltage control and signal cable for internal and external wiring of OEM equipment for industrial applications. The jacket is very oil resistant and is pressure-extruded for improved flexibility and easier installation. Conductor size and... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); cULus, RU, FP 2015, CSA, CE, RoHS
- Number of Conductors: 4
- Product Category: Cable Assembly
- Rated Voltage: 0.3000
from Hi-Tech Controls, Inc.
Waterproof heavy hose cable for connection of submerged pumps. For a recommended water depth to 10 m and max. water temperature to +40 °C/+104 °F. Can be used in dry, damp and wet areas as well as in open air. [See More]
- Standards / Certifications: RoHS; CE Marking; HAR
- Number of Conductors: 1 to 3
- Product Category: Cable
- Rated Voltage: 2.5
from igus® inc.
1. Especially bending-resistant, fine-wire stranded conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filling, pressure extruded PUR blend [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 12 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
CC 500 is a multi-conductor, flexible power and control cable designed for use in all electrical equipment in dry, damp and wet conditions. Recommended applications. include machine tools, assembly lines, control systems, data processing equipment, CNC machining centers, connections between control... [See More]
- Standards / Certifications: CE Marking; VDE
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Alpha Wire
Get control of your communication and control applications. Our line-up of standard communication and control cables gives you maximum choice and fewer tradeoffs. By offering you a comprehensive collection of insulation/jacketing materials, shielding options, and conductor counts, you can easily... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -20 to 60
- Rated Voltage: 0.1500
- North American: 26
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 5
- Rated Temperature: -40 to 90
from LAPP
ÖLFLEX ® CHAIN 809 is a flexible multi-conductor cable designed for basic continuous flexing applications. ÖLFLEX ® CHAIN 809 CY is a shielded version available with an overall tinned copper braid. This is recommended when electrical interference needs to be suppressed. [See More]
- Standards / Certifications: RoHS; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 1
from Mueller Group, Inc. (The)
DATA-CP-TP is a VDE approved, flexible, oil-resistant, overall shielded, polyurethane, multi-pair European data transmission cable. For use in flexible or stationary applications under high mechanical stress with free movement without any tensile stress, loads or forced movement in dry, moist and... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.2500
- Product Category: Cable
from Automation24, Inc.
UNITRONIC ® 300 S 22/4C is a rugged, multi-conductor, low voltage control and signal cable for internal and external wiring of OEM equipment for industrial applications. The jacket is very oil resistant and is pressure-extruded for improved flexibility and easier installation. Conductor size... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); cULus, RU, FP 2015, CSA, CE, RoHS
- Number of Conductors: 4
- Product Category: Cable Assembly
- Rated Voltage: 0.3000
from Hi-Tech Controls, Inc.
These cables are used as control or feeder cables in lifts and hoists. The special attention given to both production and material quality for these cables has made them ideal even for use under extreme conditions. HELUKABEL ® Lift-2S has also proven itself to be ideally suited for installation... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 12 to 24
- Product Category: Cable
- Rated Voltage: 3
from igus® inc.
1. Especially bending-resistant, fine-wire stranded conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filling, pressure extruded. 5. Highly flexible braided copper shield. 6. Pressure extruded, PUR blend. Typical Applications. for... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 5 to 24
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
CC 500 B is a multi-conductor, flexible power and control cable designed for use in all electrical equipment in dry, damp and wet conditions. Recommended. applications include machine tools, assembly lines, control systems, data processing equipment, CNC machining centers, connections between... [See More]
- Standards / Certifications: CE Marking; VDE
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Alpha Wire
Get control of your communication and control applications. Our line-up of standard communication and control cables gives you maximum choice and fewer tradeoffs. By offering you a comprehensive collection of insulation/jacketing materials, shielding options, and conductor counts, you can easily... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -20 to 60
- Rated Voltage: 1
- North American: 24
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 7
- Rated Temperature: -40 to 90
from LAPP
ÖLFLEX ® CHAIN 809 is a flexible multi-conductor cable designed for basic continuous flexing applications. ÖLFLEX ® CHAIN 809 CY is a shielded version available with an overall tinned copper braid. This is recommended when electrical interference needs to be suppressed. [See More]
- Standards / Certifications: RoHS; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 1
from Mueller Group, Inc. (The)
EXTRAFLEX is a PVC, high flex, heavy-duty, oil-resistant, continuous flex multi-conductor cable designed for use in the machine tool industry, robotics, machine production and drag chains where high flexibility is essential. Suitable for use in flexible and stationary applications under medium... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
Are suited as a connecting cable for very high mechanical stress in underground mining and tools, for use in industries and outdoors. They are also used for the mining industry: surface mining, stone-pits, on building sites, outdoors as well as indoors. Suitable for fixed installation on plaster in... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 1 to 19
- Product Category: Cable
- Rated Voltage: 3
from igus® inc.
1. Fine strand copper wire conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filling, pressure extruded. Classification of the Chainflex ® cable: Class 4.4.1.2. Requirements: 4: Cables with special structure for continuous... [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
CC 500 CP is a multi-conductor, shielded, flexible oil resistant control cable. The special polyurethane jacket provides an excellent chemical and abrasion resistance. as well as being tear resistant. An overall tinned copper shield is recommended whenever electrical interference distorts signal... [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Alpha Wire
Xtra-Guard ® 3 - Direct burial —no conduit needed. The preferred outdoor cable for direct burial. 6 times the water resistance of PVC. Features a specially formulated polyethylene jacket for outstanding service life and ultraviolet light stability in all jacket colors. Resistant to the... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -30 to 80
- Rated Voltage: 0.3000
- North American: 22
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 3
- Rated Temperature: -40 to 90
from LAPP
Ouml;LFLEX ® FD CLASSIC 810 is a flexible multi-conductor cable designed for continuous flex applications. It is specially designed to optimize flex life and provides excellent resistance to minerals oils, synthetic oils, and water-based coolants. ÖLFLEX ® FD CLASSIC 810 CY is a... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 50
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Mueller Group, Inc. (The)
EXTRAFLEX-CH is a halogen-free, high flex, light-weight, overall shielded, continuous flex multi-conductor cable designed for use in the machine tool industry, robotics, machine production and drag chains where high flexibility is essential. Suitable for use in flexible and stationary applications... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
HELUTRUCK ® 272. This low voltage cable is designed for the wiring of electrical installations in the manufacture of commercial vehicles. Especially suited for trailers and semi trailers. This flat cable can be used for simple and quick contacting of side lights by means of conductor... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 3
from igus® inc.
1. Especially bending-resistant, fine-wire stranded conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filled extruded, oil-proof TPE blend. Classification of the Chainflex ® cable: Class 5.5.2.2. Requirements: 5: Cables for... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 2 to 42
- Product Category: Cable
- Rated Voltage: 0.6000
from SAB North America
CC 500 CY is a multi-conductor, shielded, flexible power and control cable designed for use in all electrical equipment in dry, damp and wet conditions. An overall. tinned copper shield is recommended whenever electrical interference distorts signal transmission, or when EMI emissions need to be... [See More]
- Standards / Certifications: CE Marking; VDE
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Alpha Wire
Xtra-Guard ® 3 - Direct burial —no conduit needed. The preferred outdoor cable for direct burial. 6 times the water resistance of PVC. Features a specially formulated polyethylene jacket for outstanding service life and ultraviolet light stability in all jacket colors. Resistant to the... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -30 to 80
- Rated Voltage: 0.3000
- North American: 22
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 4
- Rated Temperature: -40 to 90
from LAPP
Ouml;LFLEX ® FD CLASSIC 810 is a flexible multi-conductor cable designed for continuous flex applications. It is specially designed to optimize flex life and provides excellent resistance to minerals oils, synthetic oils, and water-based coolants. ÖLFLEX ® FD CLASSIC 810 CY is a... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 50
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Mueller Group, Inc. (The)
EXTRAFLEX-CP is a polyurethane, high flex, heavy-duty, oil-resistant, overall shielded, continuous flex multi-conductor cable designed for use in the machine tool industry, robotics, machine production and drag chains where high flexibility is essential. Suitable for use in flexible and stationary... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but are not suitable for open air. These are designed as control and connecting cables to machines, tool machineries, conveyor belts and... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE; HAR
- Number of Conductors: 2 to 12
- Product Category: Cable
- Rated Voltage: 2
from igus® inc.
1. Especially bending-resistant, fine-wire stranded conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filling, pressure extruded. 5. Highly flexible braided copper shield. 6. Pressure extruded, oil-proof PVC sheath blend. [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 4 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
CC 500 P is a multi-conductor, flexible oil resistant control cable. The special polyurethane jacket provides an excellent chemical and abrasion resistance as well. as being tear resistant. For use in harsh environments. [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Alpha Wire
Xtra-Guard ® 3 - Direct burial —no conduit needed. The preferred outdoor cable for direct burial. 6 times the water resistance of PVC. Features a specially formulated polyethylene jacket for outstanding service life and ultraviolet light stability in all jacket colors. Resistant to the... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -30 to 80
- Rated Voltage: 0.3000
- North American: 22
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 5
- Rated Temperature: -40 to 90
from LAPP
The single-cable solution for servo applications. The ÖLFLEX ® SERVO FD 7FTC goes from cable tray to cable track – no need for costly conduit, saving time and expense. Servo motors are known for precision and energy-efficiency. A high quality encoder/feedback cable connecting the... [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 9
- Product Category: Cable
- Rated Voltage: 1
from Mueller Group, Inc. (The)
EXTRAFLEX-P is a polyurethane, high flex, heavy-duty, oil-resistant, continuous flex multi-conductor cable designed for use in the machine tool industry, robotics, machine production and drag chains where high flexibility is essential. Suitable for use in flexible and stationary applications under... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air. These are designed as control and connecting cables to machines, tool machineries, conveyor belts and production... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE; HAR
- Number of Conductors: 2 to 12
- Product Category: Cable
- Rated Voltage: 2
from igus® inc.
1. Highly flexible special conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filling, pressure extruded. 5. Highly flexible braided copper shield. 6. With pressure extruded TPE blend. Classification of the Chainflex ® cable:... [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 18 to 24
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
CC 500 SY is a multi-conductor, steel braided, flexible power and control cable. The steel wire braid provides excellent protection against mechanical abuse and. EMI emissions. Recommended applications include machine tools, assembly lines, control systems, data processing equipment, CNC machining... [See More]
- Standards / Certifications: CE Marking; VDE
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Alpha Wire
Xtra-Guard ® 3 - Direct burial —no conduit needed. The preferred outdoor cable for direct burial. 6 times the water resistance of PVC. Features a specially formulated polyethylene jacket for outstanding service life and ultraviolet light stability in all jacket colors. Resistant to the... [See More]
- Standards / Certifications: CE Marking
- Rated Temperature: -30 to 80
- Rated Voltage: 0.3000
- North American: 22
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 7
- Rated Temperature: -40 to 90
from LAPP
Servo cables according to INDRAMAT ® Standard INK are highly flexible, oil-resistant, and are UL, CSA, and CE rated. Power cables with pairs and feedback/signal cables are in accordance to INDRAMAT standards. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 4
- Product Category: Cable
- Rated Voltage: 0.3000 to 1
from Mueller Group, Inc. (The)
FLEX-SF is a harmonized, light-duty, super-flexible, PVC multi-conductor 500-volt European cord. Commonly used as supply cables for small machines and portable devices. Recommended especially for use on domestic as domestic appliances, electrical power tools and various kinds of handyman tools. [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
The specific construction of DATAPUR-C makes this cable type ideal for use in all types of computer systems, office machinery, signal and control units. DATAPUR-C has uses that go beyond this for example in the field of acoustics, e.g. in telephone systems, intercoms as well as in all areas... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.8000 to 1.2
from igus® inc.
1. Highly flexible special conductor. 2. Core element with tensile strength. 3. Bunch stranding by core cord of high tensile strength. 4. Gusset-filling, pressure extruded TPE blend. Classification of the Chainflex ® cable: Class 7.6.4.2. Requirements: 7: Cables for continuous movement in... [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 3 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from SAB North America
CC 540 CP is a multi-conductor, flexible power supply cable with a rugged, abrasion resistant polyurethane jacket. The polyurethane jacket allows this cable to. be used both indoors and outdoors, in wet, dry, cold or hot conditions. An overall tinned copper braid is recommended whenever electrical... [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 3
- Rated Temperature: -40 to 90
from LAPP
ÖLFLEX ® CONTROL TM is a multi-conductor cable designed for use on machine tool equipment and other industrial machinery conforming to NFPA 79 2012 wiring norms. ÖLFLEX ® CONTROL TM is also UL/CSA TC approved so it can be routed in tray as well. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 3 to 25
- Product Category: Cable
- Rated Voltage: 0.6000 to 1
from Mueller Group, Inc. (The)
H00V-D (ESUY) is a harmonized, very high flex single core used for the earthing of portable equipment and short-circuiting. These cables perform a protective function in the live repair of high voltage power supply in railway systems, failing current equipment, alternating current systems and in... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables can be used for medium mechanical loads in dry, damp or wet environments, e.g. for connecting agricultural and commercial equipment and heaters provided there is no danger of contact with the hot parts or by radiation of heat. These robust and flexible cables are used for electrical... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE; HAR
- Number of Conductors: 2 to 5
- Product Category: Cable
- Rated Voltage: 2 to 2.5
from igus® inc.
1. Core element with tensile strength. 2. Fine-wire special conductor. 3. 2 conductors each, stranded with short pitches. 4. Highly flexible braided copper shield. 5. Pressure extruded. Classification of the Chainflex ® cable: Class 5.5.2.1. Requirements: 5: Cables for continuous movement in... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 28
- Product Category: Cable
- Rated Voltage: 0.3000
from SAB North America
CC 540 P is a multi-conductor, flexible power supply cable with a rugged, abrasion resistant polyurethane jacket. The polyurethane jacket allows this cable to be. used both indoors and outdoors, in wet, dry, cold or hot conditions. The cable is flame retardant and is colored safety yellow. [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 4
- Rated Temperature: -40 to 90
from LAPP
Ouml;LFLEX ® CONTROL TM is a multi-conductor cable designed for use on machine tool equipment and other industrial machinery conforming to NFPA 79 2012 wiring norms. ÖLFLEX ® CONTROL TM is also UL/CSA TC approved so it can be routed in tray as well. ÖLFLEX ® CONTROL TM CY has... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 3 to 25
- Product Category: Cable
- Rated Voltage: 0.6000 to 1
from Mueller Group, Inc. (The)
H01N2-D is a harmonized, flexible, rubber jacketed welding cable. This cable is designed for the transmission of high currents from electric welding machines to the welding tool on manually or automatically operated line and spot welding machines. Also suitable for assembly lines and conveyor... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.1000
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but are not suitable for open air. These are designed as control and connecting cables to machines, tool machineries, conveyor belts and... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE; HAR
- Number of Conductors: 2 to 65
- Product Category: Cable
- Rated Voltage: 2
from igus® inc.
1. Fine-wire special conductor. 2. Braiding in layers with extremely short pitch. 3. Highly flexible braided copper shield. 4. Pressure extruded. Classification of the Chainflex ® cable: Class 4.4.2.1. Requirements: 4: Cables with special structure for continuous movement in e-chains ®,... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 3 to 24
- Product Category: Cable
- Rated Voltage: 0.3000
from SAB North America
CC 600 is a multi-conductor, 600 V, 90 °C, UL, CSA and VDE approved, oil resistant flexible control cable. The reduced outer diameter permits easy handling and. installation in confined areas. Our specially designed PVC jacket passes the stringent requirements of the VDE test 0281 part 1 and HD... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 5
- Rated Temperature: -40 to 90
from LAPP
ÖLFLEX ® 190 is a multi-conductor cable with a highly oil-, coolant-, and solvent-resistant PVC jacket for control and power applications in an industrial environment. It is designed for use in all electrical equipment under dry, damp, and wet conditions. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 61
- Product Category: Cable
- Rated Voltage: 0.6000 to 1
from Mueller Group, Inc. (The)
H03VV-F is a harmonized, light duty, oil-resistant, flexible, PVC multi-conductor 300-volt European cord. Recommended for use in connecting small electrical appliances under low mechanical stress environments as in offices, kitchens and households. H03VV-F can commonly be found in connections to... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air. These are designed as control and connecting cables to machines, tool machineries, conveyor belts and production... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE; HAR
- Number of Conductors: 2 to 65
- Product Category: Cable
- Rated Voltage: 2
from igus® inc.
1. Especially bending-resistant, fine-wire stranded conductor. 2. 2 conductors each, stranded with short pitches. 3. Gusset-filling, pressure extruded. 4. Highly flexible braided copper shield. 5. With pressure extruded TPE blend. Classification of the Chainflex ® cable: Class 6.6.4.1. [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 2 to 36
- Product Category: Cable
- Rated Voltage: 0.3000
from SAB North America
CC 600 CP is a multi-conductor, 600 V, 80 °C oil resistant shielded control cable. The specially blended polyurethane jacket provides an excellent chemical and. abrasion resistance as well as being tear resistant and halogen free with low flame propagation. The overall tinned copper braid is... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® 150 CY Flexible Power and Control Cable is an internationally approved, 600V multi-conductor cable. It has UL & CSA AWM and HAR harmonized approvals for use as an interconnect cable for machinery. It's construction is extremely flexible for easier installation... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); UL Approved CSA Approved CE Approved
- Rated Voltage: 0.6000
- Number of Conductors: 7
- Rated Temperature: -40 to 90
from LAPP
Ouml;LFLEX ® 190 is a multi-conductor cable with a highly oil-, coolant-, and solvent-resistant PVC jacket for control and power applications in an industrial environment. It is designed for use in all electrical equipment under dry, damp, and wet conditions. ÖLFLEX ® 190 CY is a... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.6000 to 1
from Mueller Group, Inc. (The)
H05RN-F is a harmonized, medium duty, flexible, rubber insulated, black neoprene jacketed multi-conductor 500V. European cord. Recommended for use in electrical equipment under low stress in dry, damp or wet areas in indoor or outdoor environments. Commonly used as a connection cable in horticulture... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
HELUKABEL® BIOFLEX-500 is an extremely robust control cable with high abrasion and tear resistant properties due to its high resistance to Bio-fuel, Bio-oil and coolant emulsions. It is especially suited for use in the machine, tool making and plant industries as well as in the steel industry for... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 42
- Product Category: Cable
- Rated Voltage: 3
from igus® inc.
1. Especially bending-resistant, fine-wire stranded conductor. 2. Pressure extrudet element jacke. 3. Highly flexible braided copper shield. 4. Core element with tensile strength. 5. 2 conductors each stranded in especially short pitch. 6. Gusset-filling, pressure extruded. 7. Highly flexible steel... [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 8 to 28
- Product Category: Cable
- Rated Voltage: 0.3000
from SAB North America
CC 600 CYT is a multi-conductor, 600 V, 105 °C, UL approved flexible shielded control cable. The reduced outer diameter permits easy handling and installation. in confined areas. An overall tinned copper braid is recommended whenever electrical interference distorts signal transmission, or when... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.5000
- Number of Conductors: 3
- Rated Temperature: -40 to 80
from LAPP
Ouml;LFLEX ® TRAY II is an industrial grade tray cable with superior oil performance for long cable life. It has a pressure-extruded jacket and fine copper stranding for excellent flexibility, making it much easier to pull through tray. With UL TC-ER approval, no conduit is needed so you can... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); MSHA
- Number of Conductors: 3 to 61
- Product Category: Cable
- Rated Voltage: 0.6000 to 1
from Mueller Group, Inc. (The)
H05RR-F is a harmonized, light-duty, flexible, rubber insulated, black rubber jacketed multi-conductor European cord. Recommended for use in electrical equipment and appliances as vacuums and various kitchen appliances in low mechanical stress environments found in offices and households in dry,... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
HELUKABEL® BIOFLEX-500-C is an extremely robust control cable with high abrasion and tear resistant properties due to its high resistance to bio-fuel, bio-oil and coolant emulsions. It is especially suited for use in the machine, tool making and plant industries as well as in the steel industry for... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 42
- Product Category: Cable
- Rated Voltage: 3
from igus® inc.
1. Highly flexible special cable. 2. Energy conductor with signal pair elements stranded around high-tensile center cord. 3. Extremely highly flexible braided-pair copper shield. 4. Gusset-filling, pressure extruded. 5. Highly flexible braided copper shield. 6. Pressure extruded, oil-proof PVC... [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 6
- Product Category: Cable
- Rated Voltage: 0.6000 to 1
from SAB North America
CC 600 M CY is a multi-conductor, 600 V, 90 °C oil resistant shielded cable with all approvals, to be used on machinery and equipment for use in North America. and for worldwide export. Our special designed PVC jacket passes the stringent requirements of the VDE test 0281 part 1 and HD 21.1 oil... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE; HAR
- Number of Conductors: 3
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.5000
- Number of Conductors: 4
- Rated Temperature: -40 to 80
from LAPP
Ouml;LFLEX ® TRAY II is an industrial grade tray cable with superior oil performance for long cable life. It has a pressure-extruded jacket and fine copper stranding for excellent flexibility, making it much easier to pull through tray. With UL TC-ER approval, no conduit is needed so you can... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); MSHA
- Number of Conductors: 3 to 25
- Product Category: Cable
- Rated Voltage: 0.6000 to 1
from Mueller Group, Inc. (The)
H05VV-F is a harmonized, light duty, oil-resistant, flexible, PVC multi-conductor 500-volt European cord. Recommended for use in connecting small electrical appliances under medium mechanical stress environments as in offices, kitchens and households. H05VV-F can commonly be found in connections in... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
JZ-HF cables are ideal for use in the machine tool industry, in robotics and machine production and anywhere where high flexibility is essential. These cables have shown excellent performance in combination with standard cable trays. These cables are suitable for flexible use for medium mechanical... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 3
from SAB North America
CC 600 P is a multi-conductor, 600 V, 80 °C oil resistant control cable. The specially blended polyurethane jacket provides an excellent chemical and abrasion. resistance as well as being tear resistant and halogen free with low flame propagation. For use in harsh environments. [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.5000
- Number of Conductors: 5
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® CRANE F is a flexible oil-resistant, neoprene-jacketed festoon, power, and control cable. The flat design allows space-saving installation and a smaller bending radius. [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 4 to 12
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Mueller Group, Inc. (The)
H05VV-F/SJT is a harmonized, light duty, oil-resistant, flexible, PVC multi-conductor European and UL 62 SJT cord. The international and national approvals make this cable ideal for import and export to North American and European markets. Recommended for use in connecting small electrical... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Rated Voltage: 0.3000 to 0.5000
- Product Category: Cable
from Hi-Tech Controls, Inc.
HELUKABEL® BIOFLEX-HF-500-C is an extremely robust and highly flexible control cable with high abrasion and tear resistant properties, due to its high resistance to bio-fuel, bio-oil and coolant emulsions. It is especially suited for use in the machine, tool making and plant industries as well as in... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 3
from SAB North America
CC 600 P blue is a multi-conductor, 600 V, 80 °C oil resistant control cable. The specially blended polyurethane jacket provides an excellent chemical and abrasion. resistance as well as being tear resistant and halogen free with low flame propagation. For use in harsh environments. [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.5000
- Number of Conductors: 3
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® LIFT F is a flat control cable with special cold-resistant PVC insulation and a black PVC jacket. According to VDE definition, this cable can also be used as an elevator control cable. [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 4 to 24
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.7500
from Mueller Group, Inc. (The)
H07BN4-F is a harmonized, heavy-duty, flexible, EPR rubber insulated, special black polycholorprenene jacketed multi-conductor European cable. Recommended for use in electrical equipment under medium mechanical stress in a dry or damp indoor or outdoor environment. Commonly used on equipment in... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.4500 to 0.7500
- Product Category: Cable
from Hi-Tech Controls, Inc.
Extremely robust control cable characterized by high abrasion and notch resistance properties. Used for critical areas in such applications as machinery, tooling and plant construction, in rolling mills and steel works because of the resistance to mineral oils and to coolant emulsions in particular. [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 50
- Product Category: Cable
- Rated Voltage: 3
from SAB North America
CC 600 T is a multi-conductor, 600 V, 105 °C, UL, approved, flexible control cable. The reduced outer diameter permits easy handling and installation in confined areas. CC 600 T control cables are designed for use in all electrical equipment in dry, damp and wet conditions. Recommended... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.5000
- Number of Conductors: 4
- Rated Temperature: -40 to 80
from LAPP
The VFD cable market is large and growing. VFD motors drive machines that often operate in harsh industrial environments. To maximize production uptime, connections between motors and drives must utilize robust cables. LAPP VFD cables are engineered to operate in harsh factory conditions using... [See More]
- Standards / Certifications: RoHS; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 4
- Product Category: Cable
- Rated Voltage: 1
from Mueller Group, Inc. (The)
H07RN-F is a harmonized, heavy duty, flexible, rubber insulated, black neoprene jacketed multi-conductor 750V. European cable. Recommended for use in electrical equipment under medium mechanical stress in a dry or damp indoor or outdoor environment. Commonly used on equipment in industry works such... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.4500 to 0.7500
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are for flexible use in medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms, as measuring and control cables in machine tools, coneyor belts, production lines, as well as in machinery production, in air-conditioning and... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Number of Conductors: 2 to 56
- Product Category: Cable
- Rated Voltage: 4
from SAB North America
CC 600 World is a multi-conductor, 600 V, 90 °C, oil resistant cable, with all approvals. CC 600 World control cables are designed for use in all electrical equipment. in dry, damp and wet conditions. Our special designed PVC jacket passes the stringent requirements of the VDE test 0281 part 1... [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE; JET, HAR
- Number of Conductors: 3
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.5000
- Number of Conductors: 5
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® VFD SYMMETRICAL is a large AWG VFD cable designed with 3 symmetrical grounds and a longitudinal copper tape shield. It is UL TC-ER and CSA TC approved. ÖLFLEX ® VFD SYMMETRICAL is available from 1 AWG to 500 KCMIL for 75 HP drives and larger. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); MSHA
- Rated Voltage: 0.6000 to 1
- Product Category: Cable
- Rated Temperature: -40 to 105
from Mueller Group, Inc. (The)
H07RN-F/SOOW is a harmonized, UL/CSA approved, heavy-duty, flexible, black neoprene jacketed, multi-conductor European and domestic cord. Recommended for use in electrical equipment under medium mechanical stress in a dry or damp indoor or outdoor environment. Commonly used on equipment in industry... [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian); VDE
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, as measuring and control cables in tool machinery, conveyor belts, production lines, as well as in machinery... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Number of Conductors: 2 to 61
- Product Category: Cable
- Rated Voltage: 4
from SAB North America
CC 640 CP is a flexible multi-conductor, 600 V, 80 °C UL-approved TPE insulated flexible power supply and control cable with a rugged, abrasion resistant polyurethane. jacket. The polyurethane jacket allows this cable to be used both indoor and outdoor in wet, dry, and extremely cold conditions. [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.7500
- Number of Conductors: 3
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® PUR S is a highly flexible PUR-insulated and PUR-jacketed control cable. It has excellent oil and abrasion resistance and cold-temperature performance. [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.5000
from Mueller Group, Inc. (The)
H07RN8-F is a harmonized, heavy duty, flexible, rubber insulated, black neoprene jacketed multi-conductor European submersible pump cable. Designed for use in submersible pumps and applications for permanent use in water and under high mechanical stress. Recommended immersion depth is 10 meters with... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.4500 to 0.7500
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, as measuring and control cables in tool machines, conveyor belts, production lines in machinery production,... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Number of Conductors: 2 to 100
- Product Category: Cable
- Rated Voltage: 4
from SAB North America
CC 640 P is a flexible multi-conductor, 600 V, 80 °C UL-approved TPE insulated flexible power supply and control cable with a rugged, abrasion resistant polyurethane. jacket. The polyurethane jacket allows this cable to be used both indoor and outdoor in wet, dry, and extremely cold conditions. [See More]
- Standards / Certifications: CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.7500
- Number of Conductors: 4
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® SERVO 2YSLCY-JB is a highly flexible power cable for large horsepower motors and VFD drives. It has a double shield with polyethylene-insulated conductors for optimal low-loss power transmission when compared to PVC. [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 4 to 6
- Product Category: Cable
- Rated Voltage: 1
from Mueller Group, Inc. (The)
H07ZZ-F is a harmonized, halogen-free, heavy-duty, flexible, black jacketed multi-conductor 750V. European cable. Recommended when halogen-free, low-smoke and corrosive gas properties are required in case of fire. Designed for use in electrical equipment under medium stress in dry and damp... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.4500 to 0.7500
- Product Category: Cable
from Hi-Tech Controls, Inc.
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, wherever internationally recognized PVC cables are required. E.g. as a control or measurements cable on... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Number of Conductors: 2 to 61
- Product Category: Cable
- Rated Voltage: 4
from SAB North America
CRX 600 is a multi-conductor, 600 V, 105 °C, UL approved, chemical resistant and oil resistant flexible control cable. The reduced outer diameter permits easy. handling and installation in confined areas. Recommended applications for use in industrial painting machinery, water treatment... [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.7500
- Number of Conductors: 5
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® SERVO 9YSLCY-JB is a highly flexible power cable for large horsepower motors and VFD drives. It has a double shield with polypropylene-insulated conductors for optimal low-loss power transmission when compared to PVC. ÖLFLEX ® SERVO 9YSLCY-JB is UL & CSA AWM rated. [See More]
- Standards / Certifications: RoHS; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 4 to 6
- Product Category: Cable
- Rated Voltage: 1
from Mueller Group, Inc. (The)
JE-LiHCH is a VDE approved, flexible, overall shielded, halogen-free multi-pair European industrial data transmission cable. For use in stationary applications in dry, damp or wet conditions. Especially designed for transmissions of signals and measurements in electronics and computers. Suitable for... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.2250
- Product Category: Cable
from Hi-Tech Controls, Inc.
For hazardous areas this flexible control cable has been constructed for closed circuit systems in accordance with VDE 0165 part 1, part 12.2.2.6, which covers the requirements for the special marking (blue) (hazard type-i-). The paired construction and the copper shielding afford a good protection... [See More]
- Standards / Certifications: RoHS; CE Marking
- Number of Conductors: 2 to 25
- Product Category: Cable
- Rated Voltage: 1 to 2
from SAB North America
CRX 600 C is a multi-conductor, 600 V, 105 °C, UL approved, chemical resistant and oil resistant flexible shielded control cable. The reduced outer diameter permits. easy handling and installation in confined areas. An overall tinned copper braid is recommended whenever electrical interference... [See More]
- Standards / Certifications: CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.6000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.7500
- Number of Conductors: 2
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® POWER MULTI is a multi-purpose power cable with cordage, tray, and NEC Class 1 Div. 1 (flexible use only) approvals. The chemical-resistant elastomeric jacket has superior performance vs. PVC, making it ideal for hazardous industrial applications. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 3 to 25
- Product Category: Cable
- Rated Voltage: 0.6000
from Mueller Group, Inc. (The)
Li2YCY-PIMF is a CE approved, flexible, oil-resistant, overall shielded, PVC multi-pair European low capacitance data transmission cable. For use in flexible or stationary applications under low mechanical stress with free movement without any tensile stress, loads or forced movements in dry and... [See More]
- Standards / Certifications: RoHS; CE Marking
- Rated Voltage: 0.3000
- Product Category: Cable
from Hi-Tech Controls, Inc.
For hazardous areas the cables with special marking (blue) (hazard type -i-) used as flexible control and measuring cables to meet the requirements for the installation of electrical apparatus. These installations are not grounded and require a separate power circuit. Those cables are not suitable... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Number of Conductors: 2 to 41
- Product Category: Cable
- Rated Voltage: 3
from SAB North America
DC 105 is an unshielded, multi-conductor signal and control cable recommended for use with computers, data transmission, office equipment, process control. equipment and instrumentation. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.7500
- Number of Conductors: 4
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® CLASSIC 100 is a color-coded multi-conductor power and control cable for use in all electrical equipment in dry, damp, or wet conditions. It is a European style cable, conforms to CE, and is available shielded or unshielded. [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 2 to 5
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.7500
from Mueller Group, Inc. (The)
Li2YCY-TP is a CE approved, flexible, oil-resistant, overall shielded, PVC multi-pair European low capacitance data transmission cable. For use in flexible or stationary applications under low mechanical stress with free movement without any tensile stress, loads or forced movements in dry and damp... [See More]
- Standards / Certifications: RoHS; CE Marking
- Rated Voltage: 0.3000
- Product Category: Cable
from Hi-Tech Controls, Inc.
For hazardous areas the cables with special marking (blue) (hazard type-i-) used as flexible control and measuring cables to meet the requirements for the installation of electrical apparatus. These installations are not grounded and require a separate power circuit. Those cables are not suitable... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Number of Conductors: 2 to 41
- Product Category: Cable
- Rated Voltage: 3
from SAB North America
DC 105 CTP is a shielded, multi-paired signal and control cable designed for use with process control instrumentation, computers, data transmission, and office. equipment. [See More]
- Standards / Certifications: RoHS; CSA Mark; CE Marking; UL Recognized Component Mark (US and Canadian)
- Number of Conductors: 2
- Product Category: Cable
- Rated Voltage: 0.3000
from Lapp Tannehill
LAPP part number ÖLFLEX ® CLASSIC 100 SY Flexible Power and Control Cable is a color-coded multi-conductor power and control cable with a galvanized steel braided shield for mechanical and low frequency protection. It is for use in all electrical equipment in dry, damp, or wet conditions. [See More]
- Standards / Certifications: CE Marking; CE Approved
- Rated Voltage: 0.7500
- Number of Conductors: 5
- Rated Temperature: -40 to 80
from LAPP
ÖLFLEX ® CLASSIC 100 is a color-coded multi-conductor power and control cable for use in all electrical equipment in dry, damp, or wet conditions. It is a European style cable, conforms to CE, and is available shielded or unshielded. [See More]
- Standards / Certifications: CE Marking
- Number of Conductors: 2 to 5
- Product Category: Cable
- Rated Voltage: 0.3000 to 0.7500
from Mueller Group, Inc. (The)
LifYCY-TP is a VDE approved, high flex, oil-resistant, overall shielded, PVC multi-pair European data transmission cable. For use in highly flexible or stationary applications under medium mechanical stress with free movement without any tensile stress, loads or forced movements in dry, moist and... [See More]
- Standards / Certifications: RoHS; CE Marking; VDE
- Rated Voltage: 0.3500
- Product Category: Cable