Powder Inorganic Chemicals and Compounds
from Old Bridge Chemicals, Inc.
TYPICAL ANALYSIS. Copper (Cu). 52.0% minimum. Moisture. <2.0%. Lead (Pb). <25 ppm. Arsenic (As). <10 ppm. Cadmium (Cd). <5 ppm. pH. 6.5 – 8.0. Suspendibility. >30. Wet Sieve #200 retention. <0.5%. Copper soluble in water. <300 ppm. Bulk density. 20 – 30 lbs. / cu. [See More]
- State of Matter: Powders
- Chemical Name: Basic Copper Sulfate
- Type: Solid State
- Chemical Formula: CuSO4 3Cu(OH)2 H2O
from Jost Chemical USA
Fine, white powder with characteristic odor [See More]
- State of Matter: Powders
- Chemical Name: Calcium Hydroxide, FCC, Low Aluminum Low HM Powder
- Bases: All Inorganic Bases; Calcium Hydroxide (Lime Water)
- Chemical Formula: Ca(OH)2
from Materion Corporation
Materion Advanced Chemicals manufactures specialty inorganic chemicals to meet the individual specifications and requested compositions of the photovoltaic solar market. With total quality control and a flexible manufacturing environment, materials produced meet custom applications and support... [See More]
- State of Matter: Powders; Evaporation Sources, Sputtering Targets
- Type: Bio-Inorganic Compounds
from Chemical Strategies, Inc.
Chemical Strategies offers over 3,000 products by JT Baker. If you are unable to locate a chemical you need, our sales department can custom source any needed materials for you directly. [See More]
- State of Matter: Powders
from Indium Corporation
General Description: White powder with chraracteristic acetic odor having a needle like crystalline morphology. Molecular Weight: 291.86. Theoretical Indium Content: 39.33%. Actual Indium Content Range: 40%-45%. Tap Density: <1. Purity: 99.99% minimum. Solubility: Freely soluble in mineral acids... [See More]
- State of Matter: Powders
- Chemical Formula: In(CH3COO)3
- Chemical Name: Indium Acetate
- Purity: 99.99
from GFS Chemicals, Inc.
ITEM#:5116. AlCl3 •6H2O. CAS#:7784-13-6. F.W.:241.43. NFPA#:1-0-1. Specific Gravity: DOT:NR. Descriptions: Specification. TEST. 1. Assay (metals basis) 99.999% min. Properties. No properties. [See More]
- State of Matter: Powders
- CAS Number: 7784-13-6
- Chemical Formula: AlCl36H2O
from Toray Industries (America), Inc.
Toray manufactures and markets a variety of specialty chemicals, including rubber additives, pharmaceutical and agrochemical raw materials, electronic information materials Toray, with its affiliate Toray Fine Chemicals Co., Ltd., produces and retails these products. [See More]
- State of Matter: Powders
from Jost Chemical USA
Black powder, odorless [See More]
- State of Matter: Powders
- Chemical Formula: CuO
- Chemical Name: Cupric Oxide Purified Low HM Powder
- CAS Number: 1317-38-0
from Chemical Strategies, Inc.
Chemical Strategies offers over 3,000 products by Columbus Chemical, Inc. If you are unable to locate a chemical you need, our sales department can custom source any needed materials for you directly. [See More]
- State of Matter: Powders
from Indium Corporation
Product Characteristics. Color: White. Molecular Weight: 165.84. %of Indium (Fine): 64-67%. % of Indium (Crystalline): 69.26%. Apparent Density: 1.2 gr/cc. Nominal d50 particle size: 20 microns. Safety Data: Available on request and shipped with product. [See More]
- State of Matter: Powders
- Chemical Formula: In(OH)3
- Chemical Name: Indium Hydroxide
- Purity: 99.99
from Jost Chemical USA
Off-white powder [See More]
- State of Matter: Powders
- Chemical Formula: FePO4 · xH2O
- Chemical Name: Ferric Phosphate Hydrate FCC Powder
- CAS Number: 10045-86-0
from Indium Corporation
Product Characteristics. Color: White. Molecular Weight: 165.84. % of Indium (Fine): 64-67%. % of Indium (Crystalline): 69.26%. Apparent Density: 1.8gr/cc. Nominal d50 particle size: 2 microns. Safety Data: Available on request and shipped with product. [See More]
- State of Matter: Powders
- Chemical Formula: In(OH)3
- Chemical Name: Indium Hydroxide
- Purity: 99.99
from Jost Chemical USA
White powder; odorless [See More]
- State of Matter: Powders
- Chemical Formula: MgHPO4 · 3H2O
- Chemical Name: Magnesium Phosphate Dibasic FCC Low HM Powder
- CAS Number: 7757-86-0
from Indium Corporation
Product Characteristics. Color: Yellow. Molecular Weight: 277.64 (82.7% IN, 17.3% O). Specific Gravity: 7.2 g/cc (Apparent Density 0.5-1.2 g/cc). Nominal Tap Density: 1 gr/cc. Nominal d50 Particle Size: 2.5 microns. BET: 13 - 18 m2/gr. Safety Data: Available on request and shipped with product. [See More]
- State of Matter: Powders
- Chemical Formula: In2O3
- Chemical Name: Indium Oxide
- Purity: 99.99
from Jost Chemical USA
Pale pink, fine granular or fine powder product [See More]
- State of Matter: Powders; Bulk Solids or Granules
- Chemical Formula: MnSO4 · H2O
- Chemical Name: Manganese Sulfate Monohydrate ACS Fine Powder
- CAS Number: 10034-96-5
from Indium Corporation
Product Characteristics. Color: Yellow. Formula Weight: 277.64 (82.7% In, 17.3% O). Specific Gravity: 7.2 g/cc (Apparent Density 0.5-1.2 g/cc). Nominal Tap Density: 1.4 gr/cc. Nominal d50 Particle Size: 17 microns. BET: 2-3 m2/gr. Safety Data: Available on request and shipped with product. [See More]
- State of Matter: Powders
- Chemical Formula: In2O3
- Chemical Name: Indium Oxide
- Purity: 99.99
from Jost Chemical USA
White, powder product [See More]
- State of Matter: Powders
- Chemical Formula: K2HPO4
- Chemical Name: Potassium Phosphate Dibasic USP Powder
- CAS Number: 7758-11-4
from Indium Corporation
Advantages of the Indium Sulfamate Bath. - One of the easiest plating baths to operate and maintain. - Proven formulation, capable of heavy production. - Extremely stable operation and long life. - Constant plating rate. - Operates at room temperature. - Wide current density range of operation. -... [See More]
- State of Matter: Powders
- Chemical Formula: In(NH2SO3)3
- Chemical Name: Indium Sulfamate
- Purity: 99.99
from Jost Chemical USA
White Crystals or Granules or Crystaline Powder [See More]
- State of Matter: Powders; Bulk Solids or Granules
- Chemical Formula: Na3PO4 ·12H2O
- Chemical Name: Sodium Phosphate Tribasic Dodecahydrate ACS Granular
- CAS Number: 10101-89-0
from Indium Corporation
General Information. Molecular Weight: 517.81. %of Indium: 44.36%. Specific Gravity: 3.438 gr/cc, Apparent density N.A. Crystalline Form: White gray powder, monoclinic prisms, hydroscopic. Specific Heat: 0.129 cal/gram Degrees C (0-100 Degrees C). Specific Heat: 49.039 cals (2 In + 3H2SO4 =... [See More]
- State of Matter: Powders
- Chemical Formula: In2(SO4)3
- Chemical Name: Indium Sulfate
- Purity: 99.99
from Indium Corporation
General Information. Molecular Weight: 517.81. % of Indium : 44.36%. Specific Gravity: 3.438 gr/cc, Apparent density N.A. Crystalline Form : white gray powder, monoclinic prisms, hydroscopic. Specific Heat : 0.129 cal/gram Degrees C (0-100 Degrees C). Heat of Fromation : 49.039 cals (2 In + 3H2SO4 =... [See More]
- State of Matter: Powders
- Chemical Formula: In2(SO4)3
- Chemical Name: Indium Sulfate
- Purity: 99.99
from Indium Corporation
Product Characteristics. Color: Greenish Yellow. Specific Gravity: 7.2 g/cc (Apparent Density 0.5-1.2g/cc). Nominal Tap Density: 0.8 gr/cc. Nominal d50 particle size: 2 microns. BET: 15 m2/gr [See More]
- State of Matter: Powders
- Chemical Formula: In2O3:SnO2
- Chemical Name: Indium Tin Oxide
- Purity: 99.99
from Indium Corporation
Product Characteristics. Color: Greenish Yellow. Specific Gravity: 7.2 g/cc (Apparent Density 0.5-1.2g/cc). Nominal Tap Density: 1.6 gr/cc. Nominal d50 Particle Size: 15 microns. BET: 2-3 m2/gr [See More]
- State of Matter: Powders
- Chemical Formula: In2O3:SnO2
- Chemical Name: Indium Tin Oxide
- Purity: 99.99
from Indium Corporation
Gallium oxide is the common term for gallium sesquioxide, or (Ga2O3). It is a white powder that consists of rod shaped crystals, with the ß-phase being the dominant crystalline phase. The Ga2O3 rods agglomerate into larger, secondary particles. Gallium sesquioxide is used in phosphors, cathodes for... [See More]
- State of Matter: Powders
- Chemical Formula: Ga2O3
- Chemical Name: Gallium Oxide
- Purity: 99.99 to 100
from Indium Corporation
Gallium trichloride (GaCl3) dissolves in virtually all solvents and thus is the ideal precursor for gallium derivatives: Gallium trichloride is the starting material for making gallium-based metal-organic precursors. Tri-methyl gallium (TMG) is the material of choice for MOCVD deposition processes... [See More]
- State of Matter: Powders
- Chemical Formula: GaCl3
- Chemical Name: Gallium Trichloride
- Purity: 99.5 to 100
from Indium Corporation
Germanium dioxide (GeO2) is a white powder that is manufactured in both crystalline and amorphous forms. Germanium dioxide's refractive index (1.7) and its optical dispersion properties make it a useful material for wide-angle lenses and optical microscope lenses. GeO2 is transparent to infrared... [See More]
- State of Matter: Powders
- Chemical Formula: GeO2
- Chemical Name: Germanium Dioxide
- Purity: 99.99 to 100
from Indium Corporation
Indium nitrate (In(NO3)3) is a slightly off-white crystalline powder. It is odorless and dissolves freely in water and lower alcohols. It is available as an anhydrous powder and in hydrated form with 3 and 4.5 associated moles of water. For more details see the product data sheet. [See More]
- State of Matter: Powders
- Chemical Formula: In(NO3)3
- Chemical Name: Indium Nitrate
- Purity: 99.99
from Indium Corporation
Indium sulfide (In2S3) is an orange-red to red colored powder with the sulfuric odor that is characteristic to all sulfides. It is insoluble in water and most organic solvents but decomposes in common mineral acids, releasing hydrogen sulfide gas. Indium sulfide is primarily used as a buffer layer... [See More]
- State of Matter: Powders
- Chemical Formula: In2S3
- Chemical Name: Indium Sulfide
- Purity: 99.99