Rod / Round Bar Stock Ferrous Metals and Iron Alloys
from High Performance Alloys, Inc.
Overview. FERRALIUM 255 is finding many cost effective applications in the chemical, marine, metallurgical, municipal sanitation, plastics, oil and gas, petrochemical, pollution control, wet phosphoric acid, paper making and metalworking industries. Called "super" because it is more alloyed than... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; UNS
- Type: Stainless
- Features: Wrought; Corrosion Resistant; Forged; Superalloy
from High Performance Alloys, Inc.
N40 is a nitrogen-strengthened, high-manganese stainless steel with high strength and excellent resistance to corrosion at high temperatures. N40, also called Nitronic 40 ®, can be fabricated and is readily weldable. N40 has been used for chemical processing, pollution control equipment and... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; UNS
- Type: Stainless
- Features: Wrought; Corrosion Resistant; Forged; Heat Resistant; Superalloy
from High Performance Alloys, Inc.
NITRONIC 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Hex; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; UNS
- Type: Stainless
- Features: Austenitic; Wrought; Corrosion Resistant; Forged; Superalloy
from High Performance Alloys, Inc.
Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800 ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares; Bar Stock; Flats / Rectangular Bar; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; UNS
- Type: Stainless
- Features: Austenitic; Wrought; Corrosion Resistant; Forged; Heat Resistant; Superalloy; Wear Resistant
from High Performance Alloys, Inc.
Alloy 2507, also known as UNS S32750, is a super-duplex stainless steel alloy that offers exceptional corrosion resistance and high mechanical strength. This alloy's excellent mechanical properties, including high tensile and yield strength, make it well-suited for applications in demanding... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; UNS
- Type: Stainless
- Features: Wrought; Duplex; Forged; Superalloy
from Hoover Steel, Inc.
Cold Rolled Rounds Other grades and sizes available. Inquiries welcomed!. Cold Rolled Squares and Hex Bars available upon request. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Features: Cold Finished, Rolled or Cold Drawn
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
1 in. Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 1
- Features: Cold Finished, Rolled or Cold Drawn
from G.L. Huyett
Drill rod is used in the manufacture of tools and dies, punches, drills, gauges, pins and other machine parts that require high strength and durability. It is ideal for use in power drive shafts and other precision applications. [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME
- Type: ToolSteel
- Length: 36 to 144
from Roda Specialty Steel
Grade: B16 Cold Finished, Quenched & Tempered [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.3750
- Type: AlloySteel
- Features: Wrought; Cold Finished, Rolled or Cold Drawn
from Corey Steel Company
Our highly trained and veteran production workforce, using the most modern equipment, can satisfy the most demanding requirements in the cold finished steel bar marketplace. Whether it be cold drawn, turned or ground and polished, or any combination of these processes, Corey can make the product. We... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares; Bar Stock; Hex; Round Bar or Rod Stock
- Specifications & Grades: AISI; ASTM / ASME
- Type: CarbonSteel
- Thickness: 0.1870 to 4
from Kloeckner Metals Corporation
Standard Lengths 12' and 20' [See More]
- Shape / Form: Bar Stock; Profile or Structural Shape; Round Bar or Rod Stock
- Applications: Automotive or Vehicular; BuildingConstruction; Mining
- Specifications & Grades: AISI
from Ed Fagan, Inc.
A controlled expansion alloy, consisting of 42% Nickel, balance Iron; used in a wide variety of electronic application, lead frames, especially for glass and ceramic seals. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; MIL-SPEC / QQS; UNS; F-30, Mil-I-23011C Class 5
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Width / OD: 0.1250 to 6
from MicroGroup
Stainless steel bar & rod is stocked primarily in the annealed condition. Available alloys from stock are 303, 304, 316, 316L. Most sizes are Screw Machine Quality (SMQ), which offers finishes and tolerances exceeding ASTM A484. Other sizes, alloys and tempers are available upon request. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; ASTM A484
- Type: Stainless
- Width / OD: 0.0930 to 2
from Quorum Technologies
A range of carbon materials suitable for our carbon coaters are available. Carbon fibre can be supplied in standard purity or high purity and in varying lengths. Carbon rods are high purity and are available as 3.05mm diameter or 6.15mm diameter (depending upon coating system) and in various lengths... [See More]
- Shape / Form: Bar Stock; Profile or Structural Shape; Round Bar or Rod Stock
- Type: CarbonSteel
from Reid Supply
Type 303 is highly corrosion resistant and non-magnetic. It has non-galling and non-seizing qualities which allow for easy machining and is better for lighter equipment if welding is not required. When cold worked, can become slightly magnetic. Free machining for heavier cuts in automatic machining... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.5000
- Type: Stainless; Stainless Steel
- Length: 72
from Hoover Steel, Inc.
Hot Rolled Rounds Other sizes available upon request. Half Round available upon request. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Features: Hot Rolled
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
1/2 " Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.5000
- Features: Cold Finished, Rolled or Cold Drawn
from Corey Steel Company
We have also been distributing metal products for eighty years. Today, we inventory a wide selection of sizes and grades of aluminum and copper alloy products. From cold finished aluminum grades like 2011-T3 to a RoHS compliant extruded product like 6462-T6511, Corey carries all the popular sizes... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares; Bar Stock; Hex; Round Bar or Rod Stock
- Specifications & Grades: AISI; ASTM / ASME
- Type: AlloySteel
- Thickness: 0.1870 to 4
from Ed Fagan, Inc.
ASTM F-15 Alloy, commonly known as Kovar, is a controlled expansion alloy consisting of 29% Nickel, 17% Cobalt, and balance Iron. Kovar is produced to ensure good properties for machining and deep drawing as well as porosity free product. Its expansion characteristics match both borosilicate (Pyrex)... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; MIL-SPEC / QQS; UNS; F-15, F-1466, Mil-I-23011C Class 1, 7726B, 7727, 7728C
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Width / OD: 0.1250 to 6
from Hoover Steel, Inc.
Stainless Rounds Standard Stock Grade is 304. Inquire for other stainless items, finishes and grades. All inquiries welcome! [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Applications: BuildingConstruction
- Type: Stainless
from Princess Auto Limited
1/4 " Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.2000
- Features: Cold Finished, Rolled or Cold Drawn
from Ed Fagan, Inc.
An alloy of 49% Cobalt, and 2%Vanadium, balance Iron. This alloy exhibits the highest magnetic saturation of any commercial alloy and excels in applications where this attribute is needed. This alloy has higher mechanical strength than other soft magnetic alloys. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock (optional feature); Bar Stock (optional feature); Strip (optional feature); Round Bar or Rod Stock
- Specifications & Grades: AMS; MIL-SPEC / QQS
- Type: Miscellaneous Ferrous Alloy; Soft Magnetic Alloy
- Thickness: 0.0020 to 0.0500
from Princess Auto Limited
3/4 in. Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.7500
- Features: Cold Finished, Rolled or Cold Drawn
from Ed Fagan, Inc.
Radiometal 4550 is a Soft Magnetic Alloy consisting of 45% Nickel, balance Iron alloy and has excellent permeability with high saturation flux density. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock (optional feature); Bar Stock (optional feature); Strip (optional feature); Round Bar or Rod Stock
- Thickness: 0.0150
- Type: Pure, Unalloyed or Very Low Alloy Additions; Miscellaneous Ferrous Alloy; Soft Magnetic Alloy
- Width / OD: 0.5000 to 2
from Princess Auto Limited
3/8 " Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.3000
- Features: Cold Finished, Rolled or Cold Drawn
from Princess Auto Limited
5/8 in. Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.6000
- Features: Cold Finished, Rolled or Cold Drawn