Semi-finished Shape / Mill Stock Ferrous Metals and Iron Alloys
from High Performance Alloys, Inc.
Overview. FERRALIUM 255 is finding many cost effective applications in the chemical, marine, metallurgical, municipal sanitation, plastics, oil and gas, petrochemical, pollution control, wet phosphoric acid, paper making and metalworking industries. Called "super" because it is more alloyed than... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; UNS
- Type: Stainless
- Features: Wrought; Corrosion Resistant; Forged; Superalloy
from Eagle Stainless Tube & Fabrication, Inc.
Eagle stocks both Types 304 & 316 alloy tubing in a variety of gauge sizes from 3 STD to 33 STD. 316 is a medical grade tubing that has good strength and corrosion. 316 surgical steel is also used in the manufacture and handling of food and pharmaceutical products where it is often required in... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Hollow Stock (Tube, Pipe, Column)
- Specifications & Grades: ASTM / ASME; T304: ASTM –A908
- Type: Stainless; T304, T316
- Width / OD: 0.0080 to 0.2600
from Isabellenhutte USA
IRON is used as positive leg of the thermocouple types J and L. For extension leads, IRON is used for JPX and LPX. As compensating lead, IRON is used as positive leg for KCA. The thermoelectric voltages for LP(X) and KPCA differ from JP(X) materials depending on standards. The standardized... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Specifications & Grades: EN
from Arnold Magnetic Technologies
Arnold Magnetic Technologies Non Grain Oriented (NGOES) Electrical Steel is optimized by thickness and finish to meet your most demanding needs for high speed, high efficiency motors and high efficiency transformer applications. When optimally applied, NGOES offers reduced eddy currents which... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Foil; Strip; Sheet
- Thickness: 0.0040 to 0.0070
- Type: Miscellaneous Ferrous Alloy
- Width / OD: 0.2000 to 17
from High Performance Alloys, Inc.
Corrosion and abrasion resistant, tough and durable, NITRONIC 30 is the stainless steel for your abrasive needs. Ball mill tests have shown that many application standards, such as AR 500 suffer six to seven times as much metal loss as NITRONIC 30. Economical, low alloy, corrosion resistant,... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Profile or Structural Shape
- Specifications & Grades: ASTM / ASME; UNS
- Type: Stainless
- Features: Wrought; Corrosion Resistant; Forged; Wear Resistant
from Eagle Stainless Tube & Fabrication, Inc.
Eagle stocks seamless steel tubing for a variety of applications requiring strength, corrosion resistance and/or heat resistance. It is ordered to specifications that make the products versatile for general use and capable of ready certification to more stringent requirements. Stand seamless tube... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Hollow Stock (Tube, Pipe, Column)
- Specifications & Grades: ASTM / ASME; ASTM-A269/A213
- Type: Stainless
- Width / OD: 8
from Arnold Magnetic Technologies
Arnold ’s Precision Thin Metal business provides many types of high quality stainless steel, rolled to precise tolerances for thinness and flatness. Its excellent corrosion resistance and good workability make stainless steel the obvious choice in numerous applications across many markets. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Foil; Strip; Sheet
- Thickness: 8.00E-5 to 0.0100
- Type: Stainless
- Width / OD: 4.25 to 17.5
from High Performance Alloys, Inc.
N40 is a nitrogen-strengthened, high-manganese stainless steel with high strength and excellent resistance to corrosion at high temperatures. N40, also called Nitronic 40 ®, can be fabricated and is readily weldable. N40 has been used for chemical processing, pollution control equipment and... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; UNS
- Type: Stainless
- Features: Wrought; Corrosion Resistant; Forged; Heat Resistant; Superalloy
from Eagle Stainless Tube & Fabrication, Inc.
Eagle stocks welded tubing for a variety applications requiring strength, corrosion resistance, and/or heat resistance. Typical welded tube sizes are certified to ASTM-A269 / A249 (average wall) which ensures that the tubing meets the required mechanical property testing such as tensile, yield and... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Hollow Stock (Tube, Pipe, Column)
- Specifications & Grades: ASTM / ASME; ASTM-A269/A249
- Type: Stainless
- Width / OD: 8
from High Performance Alloys, Inc.
NITRONIC 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Hex; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; UNS
- Type: Stainless
- Features: Austenitic; Wrought; Corrosion Resistant; Forged; Superalloy
from High Performance Alloys, Inc.
Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800 ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares; Bar Stock; Flats / Rectangular Bar; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; UNS
- Type: Stainless
- Features: Austenitic; Wrought; Corrosion Resistant; Forged; Heat Resistant; Superalloy; Wear Resistant
from High Performance Alloys, Inc.
Alloy 2507, also known as UNS S32750, is a super-duplex stainless steel alloy that offers exceptional corrosion resistance and high mechanical strength. This alloy's excellent mechanical properties, including high tensile and yield strength, make it well-suited for applications in demanding... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Profile or Structural Shape; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; UNS
- Type: Stainless
- Features: Wrought; Duplex; Forged; Superalloy
from Trinity Brand Industries
Stainless - 304 Full Hard. Type 304 stainless steels are variations of 18% chromium and 8% nickel austenitic alloy. They are the most familiar and used alloy in the stainless steel family and represent nearly half of the total U.S. stainless steel production. These alloys are used in a wide variety... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock; Strip
- Thickness: 0.0310
- Type: Stainless
from Ed Fagan, Inc.
A soft magnetic alloy consisting of 80% Nickel, 5% Molybdenum, and balance Iron used where extremely high initial & maximum permeability and minimum hysteresis is needed. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock (optional feature); Strip (optional feature)
- Specifications & Grades: AMS; ASTM / ASME; UNS; A753, N-14411C
- Type: Miscellaneous Ferrous Alloy; Soft Magnetic Alloy
- Thickness: 0.0020 to 0.0200
from Ulbrich Stainless Steels & Special Metals, Inc.
Strip, Coil, Foil & Wire, ASTM F-15. APPLICATIONS. Alloy 29-17 (Kovar ®) has been used for making hermetic seals with the harder Pyrex glasses and ceramic materials. This alloy has found wide use in application where high reliability is a necessity. In power tubes, microwave tubes,... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock; Foil; Wire; Sheet, Strip, Plate; Wire – Profile, Round, Flat, Square; Plate; Strip; Sheet
- Specifications & Grades: ASTM / ASME; UNS
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Features: Wrought; Corrosion Resistant; Cold Finished, Rolled or Cold Drawn; Die / Cold Work; Hot Rolled (optional feature)
from Hoover Steel, Inc.
Cold Rolled Rounds Other grades and sizes available. Inquiries welcomed!. Cold Rolled Squares and Hex Bars available upon request. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Features: Cold Finished, Rolled or Cold Drawn
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
1 in. Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 1
- Features: Cold Finished, Rolled or Cold Drawn
from Corey Steel Company
We have also been distributing metal products for eighty years. Today, we inventory a wide selection of sizes and grades of aluminum and copper alloy products. From cold finished aluminum grades like 2011-T3 to a RoHS compliant extruded product like 6462-T6511, Corey carries all the popular sizes... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares; Bar Stock; Hex; Round Bar or Rod Stock
- Specifications & Grades: AISI; ASTM / ASME
- Type: AlloySteel
- Thickness: 0.1870 to 4
from Dongguan Yili Electronics Co., Ltd.
Our high quality silicon steel laminations can be applied in many products, such as Power Transformer, Ballast Resistor, UPS, Charger, Control Transformers and other electrical appliances. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Features: Coated / Painted; Die / Cold Work
- Thickness: 0.0091 to 0.0197
- Processing, Temper & Finish: Annealed
from Dura-Bar
Conforms to ASTM A536 grade 65-45-12 similar to AISI1020 steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares (optional feature); Bar Stock; Flats / Rectangular Bar (optional feature); Hex (optional feature); Hollow Stock (Tube, Pipe, Column) (optional feature); Round Bar or Rod Stock (optional feature)
- Specifications & Grades: ICI, ASTM, or Other Casting Grade; ASTM / ASME
- Type: CastIron; Composite
- Width / OD: 1.25 to 20
from Reid Supply
Type 303 is highly corrosion resistant and non-magnetic. It has non-galling and non-seizing qualities which allow for easy machining and is better for lighter equipment if welding is not required. When cold worked, can become slightly magnetic. Free machining for heavier cuts in automatic machining... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.5000
- Type: Stainless; Stainless Steel
- Length: 72
from ATI
ATI produces a wide variety of stainless and specialty steels known for their excellent corrosion and heat resistance. These steel alloys are are used in a broad range of applications including, aerospace and defense, chemical processing industry, oil and gas, electrical energy, medical, automotive,... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes
- Type: Stainless
from United Performance Metals
301-1/4 hard differs from other forms of 301 offered by United Performance Metals in that it has been hard cold rolled to its 1/4 hard condition. This increases the metal's attractiveness for mild drawing, stretching and forming operations. At 1/4 hard, type 301 stainless steel has a tensile... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0150 to 0.1300
from MicroGroup
Stainless steel bar & rod is stocked primarily in the annealed condition. Available alloys from stock are 303, 304, 316, 316L. Most sizes are Screw Machine Quality (SMQ), which offers finishes and tolerances exceeding ASTM A484. Other sizes, alloys and tempers are available upon request. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; ASTM A484
- Type: Stainless
- Width / OD: 0.0930 to 2
from Schmalz Inc.
Modular clamping system for precise metal and plastic machining. The Steel-Plate is mounted vacuum-tight on the Schmalz Matrix-Plate. Vacuum blocks ISBL are positioned flexibly and tubelessly above the vacuum openings and are magnetically pre-fixed. All the processed materials are optimized... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate
- Length: 11.81
- Type: CastSteel
from Kloeckner Metals Corporation
Kloeckner Metals, along with its subsidiary company Temtco Steel are ‘reliable partners ’ to more than 8,000 metalworking businesses throughout the United States. Through these partnerships, the Company uses its technological, commercial, operational, and financial resources to meet the... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Width / OD: 36 to 72
- Type: Stainless
- Length: 96 to 144
from Arcelor Mittal USA
Zinc or zinc-iron alloy coating weights or designations [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Specifications & Grades: ASTM / ASME; ASTM A 879
- Type: AlloySteel
- Thickness: 0.0150 to 0.0700
from Roda Specialty Steel
Grade: B16 Cold Finished, Quenched & Tempered [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.3750
- Type: AlloySteel
- Features: Wrought; Cold Finished, Rolled or Cold Drawn
from Trinity Brand Industries
Stainless - 301/302/304 Full Hard. Type 301 is an austenitic stainless steel with a composition of 17% chromium and 7% nickel. Its resistance to atmosphere corrosion and its bright surface finish make it an excellent choice for decorative structural applications. Kitchen equipment, automotive... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Thickness: 1.00E-3
- Type: Stainless
from Ed Fagan, Inc.
A soft magnetic alloy consisting of 80% Nickel, 5% Molybdenum, and balance Iron used where extremely high initial & maximum permeability and minimum hysteresis is needed. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Specifications & Grades: AMS; ASTM / ASME; UNS; A753, N-14411C
- Type: Miscellaneous Ferrous Alloy; Soft Magnetic Alloy
- Thickness: 0.0100 to 120
from Hoover Steel, Inc.
Cold Rolled Sheet All inquiries are welcome!. Inquire for Abrasion Resistant (AR) Plates. Shearing and bending services available. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Features: Cold Finished, Rolled or Cold Drawn
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
1/2 " Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.5000
- Features: Cold Finished, Rolled or Cold Drawn
from Corey Steel Company
Our highly trained and veteran production workforce, using the most modern equipment, can satisfy the most demanding requirements in the cold finished steel bar marketplace. Whether it be cold drawn, turned or ground and polished, or any combination of these processes, Corey can make the product. We... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock
- Thickness: 0.1000 to 3
- Type: AlloySteel (optional feature); CarbonSteel (optional feature)
- Width / OD: 0.1000 to 3
from Dura-Bar
Similar to ASTM A48 class 40, contains type A graphite [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares (optional feature); Bar Stock; Flats / Rectangular Bar (optional feature); Hex (optional feature); Hollow Stock (Tube, Pipe, Column) (optional feature); Round Bar or Rod Stock (optional feature)
- Width / OD: 0.6250 to 20
- Type: CastIron; Composite
- Length: 54 to 144
from Reid Supply
Made of dimensionally stable chromium, tungsten and vanadium electric furnace tool steel. Low 1,450-1,500 Fahrenheit hardening range makes this steel easy to harden. Vanadium content assures fine grain and high durability. Fully spheroidized and annealed for uniform carbide size and easy machining. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Thickness: 0.0630
- Type: ToolSteel; General Purpose Tool Steel
- Width / OD: 2
from United Performance Metals
301-1/2 hard differs from other forms of 301 offered by United Performance Metals in that it has been hard cold rolled to its 1/2 hard condition. This makes it ideal for applications requiring both formability and tensile strength of 150,000 PSI and yield strength of 110,000 PSI. Common Applications... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0090 to 0.1300
from MicroGroup
Stainless steel wire is stocked primarily in 304 stainless steel, with spring temper per ASTM A313 and a bright surface finish. Sizes range from .003" to .156" in .001" increments. Diameter tolerance for wire is typically ±.0002". Other alloys and tempers available. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Wire
- Specifications & Grades: ASTM / ASME; ASTM A313
- Type: Stainless
- Width / OD: 0.0030 to 0.1560
from Schmalz Inc.
Modular clamping system for precise metal and plastic machining. The Steel-Plate is mounted vacuum-tight on the Schmalz Matrix-Plate. Vacuum blocks ISBL are positioned flexibly and tubelessly above the vacuum openings and are magnetically pre-fixed. All the processed materials are optimized... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate
- Length: 15.75
- Type: CastSteel
from Trinity Brand Industries
Steel - HI Carbon 1095 RC 48/52. 1/2" X 12" Strips. Decimal - 0.0005 Thru 0.035. Feeler gage 12" strips and Thickness gage 25 ft coils are used in a variety of industries including aerospace, automotive and electronics as a close tolerance shim or to more accurately measure the spacing and clearance... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Strip
- Thickness: 1.00E-3
- Type: CarbonSteel
from Ed Fagan, Inc.
ASTM F-15 Alloy, commonly known as Kovar, is a controlled expansion alloy consisting of 29% Nickel, 17% Cobalt, and balance Iron. Kovar is produced to ensure good properties for machining and deep drawing as well as porosity free product. Its expansion characteristics match both borosilicate (Pyrex)... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate (optional feature); Sheet (optional feature)
- Specifications & Grades: AMS; ASTM / ASME; MIL-SPEC / QQS; UNS; F-15, F-1466, Mil-I-23011C Class 1, 7726B, 7727, 7728C
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Width / OD: 0.0050 to 2
from Hoover Steel, Inc.
Stock Length: 20 FT Inquire for Abraison Resistant (AR) Flats [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Applications: BuildingConstruction
- Type: CarbonSteel
from Princess Auto Limited
1/4 " Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.2000
- Features: Cold Finished, Rolled or Cold Drawn
from Dura-Bar
Suitable for corrosive environments, conforms to ASTM A436 [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares (optional feature); Bar Stock; Flats / Rectangular Bar (optional feature); Hex (optional feature); Hollow Stock (Tube, Pipe, Column) (optional feature); Round Bar or Rod Stock (optional feature)
- Specifications & Grades: ICI, ASTM, or Other Casting Grade; ASTM / ASME
- Type: CastIron; Composite
- Width / OD: 1 to 6
from Reid Supply
Made of dimensionally stable chromium, tungsten and vanadium electric furnace tool steel. Low 1,450-1,500 Fahrenheit hardening range makes this steel easy to harden. Vanadium content assures fine grain and high durability. Fully spheroidized and annealed for uniform carbide size and easy machining. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Thickness: 0.0630
- Type: ToolSteel; General Purpose Tool Steel
- Width / OD: 0.5000
from United Performance Metals
Type 410 stainless steel is a general purpose hardenable stainless steel. Its strength, good ductility and resistance to corrosion in mild atmospheres, steam and mild chemical environments make it well suited for highly stressed parts. Common Applications of 410 Stainless Steel. Automotive exhausts,... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0180 to 0.3000
from Schmalz Inc.
Modular clamping system for precise metal and plastic machining. The Steel-Plate is mounted vacuum-tight on the Schmalz Matrix-Plate. Vacuum blocks ISBL are positioned flexibly and tubelessly above the vacuum openings and are magnetically pre-fixed. All the processed materials are optimized... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate
- Length: 23.62
- Type: CastSteel
from Trinity Brand Industries
17-4 Precipitation Hardening Alloy (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless steel used for applications requiring high strength and moderate level of corrosion resistance. High strength is maintained to approximately 600 ºF (316 ºC). The corrosion... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Strip
- Thickness: 0.0100
- Type: Stainless
from Ed Fagan, Inc.
Invar is a low expansion alloy, consisting of 36% Nickel, balance Iron. This alloy exhibits extremely low expansion around ambient temperatures and is often used where minimum expansion is required. Invar was originally used for surveying tapes. The name Invar is a variant of Invariant, a reference... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate (optional feature); Sheet (optional feature)
- Specifications & Grades: ASTM / ASME; MIL-SPEC / QQS; UNS; A-658, B-753, Mil-I-23011C Class 7, F-1684 (96) Mil-S-16598B
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Width / OD: 0.0050 to 2
from Hoover Steel, Inc.
Galvanized Sheet Stock Size: 4 FT. x 10 FT. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Processing, Temper & Finish: Galvanized
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
1/8 " x 1 " Cold Finished (Rolled) Flat [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Width / OD: 1
- Thickness: 0.1250
- Length: 60
from United Performance Metals
321 stainless steel is most similar to 304 stainless steel, however it contains the addition of Titanium making it an excellent choice for prolonged high temperature applications. The addition of Titanium stabilizes this grade of stainless steel against the formation of Chromium Carbide in heat... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0080 to 0.2400
from Ed Fagan, Inc.
ASTM F-15 Alloy, commonly known as Kovar, is a controlled expansion alloy consisting of 29% Nickel, 17% Cobalt, and balance Iron. Kovar is produced to ensure good properties for machining and deep drawing as well as porosity free product. Its expansion characteristics match both borosilicate (Pyrex)... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Wire
- Specifications & Grades: AMS; ASTM / ASME; MIL-SPEC / QQS; UNS; F-15, F-1466, Mil-I-23011C Class 1, 7726B, 7727, 7728C
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Width / OD: 0.0200 to 0.1200
from Hoover Steel, Inc.
Galvanized Sheet All inquiries are welcome!. Inquire for Abrasion Resistant (AR) Plates. Shearing and bending services available. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Processing, Temper & Finish: Galvanized
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
3/16 " x 1-1/2 " Cold Finished (Rolled) Flat [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Width / OD: 1.5
- Thickness: 0.1875
- Length: 60
from United Performance Metals
347 stainless steel has a high resistance to prolonged heat and corrosion making it well suited for engine, power generation, welded fabrications and other high heat applications. 347 stainless steel offers good mechanical properties with higher creep and stress rupture characteristics than other... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0180 to 0.1300
from Ed Fagan, Inc.
A controlled expansion alloy, consisting of 42% Nickel, 6% Chromium, balance Iron; used in a wide variety of electronic applications, especially for glass seals. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate (optional feature); Sheet (optional feature)
- Specifications & Grades: ASTM / ASME; MIL-SPEC / QQS; F-30, Mil-I-23011C Class 6
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Features: Wrought; Corrosion Resistant; Cold Finished, Rolled or Cold Drawn
from Hoover Steel, Inc.
Hot Rolled Plate Shearing and bending services available. All inquiries are welcome!. Other Stock Sizes Available: * 5 FT. x 10 FT. ** 6 FT. x 10 FT. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate
- Features: Hot Rolled
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
3/4 in. Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.7500
- Features: Cold Finished, Rolled or Cold Drawn
from United Performance Metals
304 stainless steel has a high resistance to corrosion and lends itself to many types of fabrication, making it one of the most widely used forms of stainless steel used today. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Foil; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0080 to 0.3000
from Ed Fagan, Inc.
A controlled expansion alloy, consisting of 42% Nickel, balance Iron; used in a wide variety of electronic application, lead frames, especially for glass and ceramic seals. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Specifications & Grades: ASTM / ASME; MIL-SPEC / QQS; UNS; F-30, Mil-I-23011C Class 5
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Width / OD: 0.1250 to 6
from Hoover Steel, Inc.
Hot Rolled Rounds Other sizes available upon request. Half Round available upon request. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Features: Hot Rolled
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
3/8 " Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.3000
- Features: Cold Finished, Rolled or Cold Drawn
from United Performance Metals
316/316L stainless steel has a high resistance to many chemical corrodents and marine atmospheres. 316/316L stainless steels are more resistant to general corrosion and pitting/crevices than conventional austenitic stainless steels. 316/316L stainless steels also offer higher creep,... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0100 to 0.1300
from Ed Fagan, Inc.
ASTM F-15 Alloy, commonly known as Kovar, is a controlled expansion alloy consisting of 29% Nickel, 17% Cobalt, and balance Iron. Kovar is produced to ensure good properties for machining and deep drawing as well as porosity free product. Its expansion characteristics match both borosilicate (Pyrex)... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Specifications & Grades: AMS; ASTM / ASME; MIL-SPEC / QQS; UNS; F-15, F-1466, Mil-I-23011C Class 1, 7726B, 7727, 7728C
- Type: Miscellaneous Ferrous Alloy; Controlled / Low Expansion Alloy
- Width / OD: 0.1250 to 6
from Hoover Steel, Inc.
Hot Rolled. Other sizes available upon request. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Squares; Bar Stock
- Applications: BuildingConstruction
- Type: CarbonSteel
from Princess Auto Limited
5/8 in. Cold Finished (Rolled) Round Steel [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Length: 60
- Width / OD: 0.6000
- Features: Cold Finished, Rolled or Cold Drawn
from United Performance Metals
Type A-286 is an iron-based super alloy useful for applications requiring high strength and corrosion resistance up to 1300 degrees Fahrenheit and for lower stress applications at higher temperatures. A-286 can be hardened to a strength level. The alloy is also useful for low temperature... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0200 to 0.0830
from Ed Fagan, Inc.
A soft magnetic alloy, consisting of 49% Nickel, balance Iron used where high initial permeability, maximum permeability, and low core loss is needed. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Specifications & Grades: AMS; ASTM / ASME; UNS; A753, N-14411C
- Type: Miscellaneous Ferrous Alloy; Soft Magnetic Alloy
- Thickness: 0.1250 to 3.62
from Hoover Steel, Inc.
Galvanized Slotted Flat Landscape edging and guard rail available. Inquire for types and sizes. Inquire for other sizes and lengths. Bundle size: 10 pcs. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Processing, Temper & Finish: Galvanized
- Type: CarbonSteel
- Applications: BuildingConstruction
from Princess Auto Limited
Cold-Finished Rolled Sheets [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Length: 48
- Width / OD: 24.1
- Processing, Temper & Finish: Cold
from United Performance Metals
17-7 stainless steel develops its strength and hardness through heat treating. This makes it well suited for applications that require good formability, high strength/hardness and minimum distortion upon heat treating. Common Applications of 17-7 Stainless Steel. Aerospace applications. Chemical... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0180 to 0.2400
from Ed Fagan, Inc.
A soft magnetic alloy consisting of 80% Nickel, 5% Molybdenum, and balance Iron used where extremely high initial & maximum permeability and minimum hysteresis is needed. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Flats / Rectangular Bar
- Specifications & Grades: AMS; ASTM / ASME; UNS; A753, N-14411C
- Type: Miscellaneous Ferrous Alloy; Soft Magnetic Alloy
- Thickness: 0.1250 to 3.62
from Hoover Steel, Inc.
Stainless Plate Standard Stock Grade is 304. Inquire for other stainless items, finishes and grades. All inquiries welcome! [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate
- Applications: BuildingConstruction
- Type: Stainless
from Princess Auto Limited
Satin-Coated Sheets [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Length: 48
- Width / OD: 24
- Processing, Temper & Finish: Satin
from United Performance Metals
17-4 stainless steel develops its strength and hardness through heat treating. This makes it well suited to applications that require ease of fabrication and then the addition of strength/hardness for improved reliability. 17-4 stainless steels provide an outstanding combination of high strength and... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Wire; Plate; Strip; Sheet
- Specifications & Grades: AMS; UNS
- Type: Stainless
- Thickness: 0.0290 to 0.3000
from Ed Fagan, Inc.
Radiometal 4550 is a Soft Magnetic Alloy consisting of 45% Nickel, balance Iron alloy and has excellent permeability with high saturation flux density. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock (optional feature); Bar Stock (optional feature); Strip (optional feature); Round Bar or Rod Stock
- Thickness: 0.0150
- Type: Pure, Unalloyed or Very Low Alloy Additions; Miscellaneous Ferrous Alloy; Soft Magnetic Alloy
- Width / OD: 0.5000 to 2
from Hoover Steel, Inc.
Stainless Rounds Standard Stock Grade is 304. Inquire for other stainless items, finishes and grades. All inquiries welcome! [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Bar Stock; Round Bar or Rod Stock
- Applications: BuildingConstruction
- Type: Stainless
from Hoover Steel, Inc.
Stainless Sheet Standard Stock Grade is 304. Inquire for other stainless items, finishes and grades. All inquiries welcome! [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Applications: BuildingConstruction
- Type: Stainless