Braze, Weld or Solder Thermocouple Temperature Probes
from Pyromation
Heat-tracing temperature sensors are made for use in systems that measure the surface temperature of process pipe that is carrying products whose temperatures must be controlled to prevent freeze-up, or to maintain a viscosity level so that the inner medium will flow. These sensors are offered with... [See More]
- Process Connection: Braze, Weld or Solder
- Base, Noble and Refractory Metal Type: K
- Configuration: Grounded Thermocouple; Ungrounded Thermocouple (optional feature)
- Element Configuration: Single Element
from ABB Measurement & Analytics
With Energy Harvester, the autonomous TSP300-W wireless temperature sensor based on WirelessHART technology, features a multitude of new functions and enhanced diagnostic information. Unique driver-independent configuration of the sensor via push buttons and LCD display. TSP311-W without thermowell. [See More]
- Process Connection: Braze, Weld or Solder
- Sensed Temperature: -321 to 2192
- Base, Noble and Refractory Metal Type: E; J; K; N
- Application Options: Explosion Proof; Splash Proof, Watertight or Direct Immersion
from Gefran
Amplified output signal o Temperature limits: -40 ... +350 °C for type T. -40 ... +750 °C for type J. -40 ... +900 °C for type E. -40 ... +1000 °C for type K (see table for sheath diameters). Tolerance: IEC 584.2 STANDARD class 1: or type T: ± 0,5 ° C (- 40 ... + 125 °... [See More]
- Process Connection: Threaded (NPT) Fitting; Braze, Weld or Solder
- Element Configuration: Single Element
- Base, Noble and Refractory Metal Type: E; J; K; T
- Sensed Temperature: -40 to 1832
from AMETEK Sensors, Test & Calibration
The 1300 series is thermocouple assemblies with fixed or interchangeable inserts. With welded or drilled thermowells for low and high pressure. Screw-in or welded to the process. In the 1300 series, you find 6 different temperature sensors, typicially used within the following fields of application: [See More]
- Process Connection: Braze, Weld or Solder
- Element Configuration: Single Element (optional feature); Double Element (optional feature)
- Base, Noble and Refractory Metal Type: J; K; N
- Sensed Temperature: ? to 2282
from Gefran
Temperature limits: - 40 ... + 350 ° C for type T. - 40 ... + 750 ° C for type J. - 40 ... + 900 ° C for type E. - 40 ... + 1000 ° C for type K. (see table for sheath diameters). Tolerance: IEC standard 584.2/Class 1: for type T: ± 0,5 ° C (- 40 ... + 125 ° C). [See More]
- Process Connection: Threaded (NPT) Fitting; Braze, Weld or Solder
- Element Configuration: Single Element
- Base, Noble and Refractory Metal Type: E; J; K; T
- Sensed Temperature: -40 to 1832
from AMETEK Sensors, Test & Calibration
The 1300 series is thermocouple assemblies with fixed or interchangeable inserts. With welded or drilled thermowells for low and high pressure. Screw-in or welded to the process. In the 1300 series, you find 6 different temperature sensors, typicially used within the following fields of application: [See More]
- Process Connection: Braze, Weld or Solder
- Element Configuration: Single Element (optional feature); Double Element (optional feature)
- Base, Noble and Refractory Metal Type: J; K; N
- Sensed Temperature: ? to 2282