MIL-SPEC / Military Cleaning Agents and Surface Treatments
from Columbia Chemical Corporation
COLUMBIA PICKLE PAL ™ is a specially formulated inhibitor for HCL and H2SO4 pickling tanks in zinc electroplating lines. It improves plating quality by eliminating smut formation on hardened parts and improves the pickle's ability to remove scale while greatly extending the life of the pickle... [See More]
- Industry Applications: Mil-Spec; Electroplating
- Features: Contains Phosphates
- Type: Descaler, Deoxidizer or Desmutter; Etchant; Rust Remover
from Sanchem, Inc.
The Naval Air Development Center tested the 6 best chromate-free metal surface treatment to the Mil-C-5541 specification. Their conclusion was that SafeGard CC is the best non chromate conversion coating terms of paint adhesion and corrosion resistance [See More]
- Industry Applications: Mil-Spec
- Features: Chrome-Free
- Type: Pretreatment
from Henkel Corporation - Industrial
Water-based, concentrated metal pre-treatment compound formulated to effectively clean painted and unpainted aircraft exterior and interior surfaces. BONDERITE ® C-AK 5948DPM AERO is a blue, alkaline, water-based, concentrated metal pre-treatment compound formulated to effectively clean painted... [See More]
- Industry Applications: Mil-Spec
- Features: Contains Phosphates
- Type: Degreaser
from Hubbard-Hall Inc.
Metal Guard ® 320 is an economical and versatile rust-preventative soluble oil, which when mixed with water and heated to 140 °-150 °F leaves a corrosion-resistant, semi-dry film. Metal Guard ® 320 is typically applied to metal surfaces by immersion, however it can be brushed or... [See More]
- Industry Applications: Mil-Spec; Black Oxide, Zinc or Manganese Phosphate, or Bare Steel Surfaces, Automotive
- Volume Basis: 5.0 to 25.0
- Type: Cleaner
from United Bio Lube
Non-hazardous, worker friendly, and safe for the environment [See More]
- Industry Applications: Mil-Spec; Firearms
- Full Strength Use: Usable Undiluted or Full Strength
- Type: Cleaner; Degreaser; Solvent
- Features: Low Foam or Non-foaming; Non-toxic; Biodegradeable; VOC Compliant
from Houghton International, Inc.
Mill Clean ™ process cleaners are heavy-duty alkaline products that are used to clean oily residues from cold rolled strip steel. There are two series: P designates powdered products and L identifies liquids. The Mill Clean line includes both silicated and non-silicated formulations depending... [See More]
- Industry Applications: Mil-Spec; Cold Rolled Strip Steel Cleaner
- Features: Low Foam or Non-foaming; Carbon Removal
- Type: Alkaline; Cleaner
from Columbia Chemical Corporation
COLCLEAN ® ELECTRO 400 is a heavy duty alkaline electro cleaner (granular compound) recommended for use where good emulsification and detergency are required for cleaning ferrous metal surfaces prior to electroplating. COLCLEAN Electro 400 removes drawing compounds, oils, and other contaminants. [See More]
- Industry Applications: Mil-Spec
- Features: Contains Phosphates
- Type: Cleaner
from Columbia Chemical Corporation
COLPHOS ® Zn 35 is a liquid, immersion zinc phosphate used to produce fine grain crystalline heavyweight coatings (1000 - 5000 mg/ft2) on steel surfaces while generating minimal sludge. It meets the requirements of ASTM F1137, MIL-DTL-16232G TYPE Z and A-A59267, provides excellent absorbing... [See More]
- Industry Applications: Mil-Spec
- Features: Contains Phosphates
- Type: Surface Treatment