Inorganic (Ceramic, Conversion, Glaze) Primers and Adhesion Promoters
from Whitford Corporation
Xylar coatings have in common an inorganic, ceramic-metallic bonding agent rather than the organic polymer resins used in Xylan coatings. The ceramic-metallic cornerstone creates coatings which are much harder than their organic counterparts and have the potential for much higher operating... [See More]
- Chemistry: Inorganic (Silicate, Cement, Glaze)
- Cure / Setting Technology: Film Drying
- Type: Primer
- Features: Abrasion, Erosion or Wear Resistant; Sealer
from Tnemec Company, Inc.
Self-curing, primer/finish with tenacious bonding and abrasion resistance [See More]
- Chemistry: Inorganic (Silicate, Cement, Glaze); Zinc; Metal Filled
- Substrate: Steel
- Type: Primer
- Cure / Setting Technology: Film Drying
from PPG Protective & Marine Coatings
High Solids Epoxy Coating [See More]
- Chemistry: Inorganic (Silicate, Cement, Glaze); Zinc; Metal Filled
- Substrate: Steel
- Type: Primer
- Thickness: 0.0020 to 0.0040
from Sanchem, Inc.
The Naval Air Development Center tested the 6 best chromate-free metal surface treatment to the Mil-C-5541 specification. Their conclusion was that SafeGard CC is the best non chromate conversion coating terms of paint adhesion and corrosion resistance [See More]
- Chemistry: Inorganic (Silicate, Cement, Glaze); Conversion; Chromate-Free
- Substrate: Steel; Other; Magnesium, Zinc; Aluminum
- Type: Primer; Conversion Coating
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
An inorganic preconstruction zinc shop primer providing heat-resistance up to 1472 °F (800 °C), excellent welding properties, and resistance to zinc salt formation caused by weathering. Recommended Usage. Super heat-resistant long-exposure shop primer for steel plate. [See More]
- Chemistry: Inorganic (Silicate, Cement, Glaze); Zinc; Metal Filled
- Substrate: Steel
- Type: Primer
- Cure / Setting Technology: Film Drying
from Sherwin-Williams Protective & Marine Coatings
Zinc Clad ® II ETHYL SILICATE is a solvent-based two-package, inorganic ethyl silicate, zinc-rich coating. Meets Class B requirements for Slip Coefficient and Creep Resistance, .56. Meets AASHTO M-300 specification. 85% zinc content in dry film. Coating self-heals to resume protection if... [See More]
- Chemistry: Inorganic (Silicate, Cement, Glaze); Zinc; Metal Filled
- Substrate: Steel; Other; Iron
- Type: Primer
- Cure / Setting Technology: Film Drying; Multicomponent
from Sherwin-Williams Protective & Marine Coatings
Zinc Clad ® II PLUS is a solvent-based, three component, inorganic ethyl silicate, zinc rich coating. This is fast drying, high solids, low VOC coating with 82%, by weight, of zinc dust in the dry film. Coating self-heals to resume protection if damaged. Provides cathodic/sacrificial protection... [See More]
- Chemistry: Inorganic (Silicate, Cement, Glaze); Zinc; Metal Filled
- Substrate: Metallic; Steel; Other; Iron
- Type: Primer (optional feature)
- Cure / Setting Technology: Film Drying; Multicomponent; Thermoset