Oxygen (O2) Gas Sensors
from Safeguard Analytics
Model SA1-O2LF smart sensor modules are designed to detect and monitor oxygen gas in ambient air. The modules consist of a lead-free electrochemical gas detection sensor and a micro-processor-based signal conditioning circuit. The signal conditioning circuits includes embedded temperature... [See More]
- Gas Types: O2 (0-25.0 %)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical
- Measurement Type: %LEL or %LFL
from Acme Engineering Products
The Acme MGMS is our latest multipoint, multigas detection system designed with modular construction and remote connectivity in mind. A DIN-rail mountable system consisting of a CM (Controller Module), RM (Relay Module), and AM (Analog Module) snap together for ease of installation, expandability,... [See More]
- Gas Types: Toxic; Combustible; NH3; CO2; CO; Refrigerants; Hydrocarbons; H2; H2S; Methane (CH4) / Natural Gas; NO2; O2
- Number of Gases Monitored: Multi
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature)
- Electrical Outputs: Switch or Relay
from ABB Measurement & Analytics
Accurate measurement of both oxygen and COe is important for the safe, reliable and efficient operation of industrial combustion plant. – carbon monoxide detector. – flue gas. – combustion analysis. – combustion analyzer. [See More]
- Gas Types: O2 (Carbon Monoxide Equivalent (COe))
- Features: Hazardous Environment
- Electrical Outputs: Current
- Operating Humidity: 0 to 95
from DigiKey
Oxygen Sensor [See More]
- Gas Types: O2
- Operating Temperature: -4 to 131
from Dynament
Dynament ’s FGD10A Flameproof Fixed Gas Detectors are specifically designed for use in potentially explosive atmospheres, where the risk of an incendive spark from electrical equipment could trigger an explosion. In such hazardous environments, commonly found in industries like oil, gas, and... [See More]
- Gas Types: Toxic; Combustible; CO2; Hydrocarbons; H2; O2
- Electrical Outputs: Current
- Sensor Technology: NDIR Infrared, Electrochemical or Pellistor
- Features: Hazardous Environment
from Analytical Industries Inc.
Key features. Signal Output: 3.5 - 5.5 mV. Measuring Range: 0-100% O2. Response Time: 9 Seconds to reach 90% of the final value. Accuracy: ±1% Full Scale (FS), ±5% FS over the operating range. Humidity Range: Non-condensing, 0-99% RH. Electrical Connections: 4 Pin Phone Jack. OEM Oxygen... [See More]
- Gas Types: O2 (0-100% O2)
- Operating Temperature: 32 to 113
- Sensor Technology: Echem
- Operating Humidity: 0 to 99
from SST Sensing Ltd.
Details. Engineered for full immersion into the gas sample stream. Minimal cross-sensitivity to other gases. Fully RoHS & REACH compliant. Operates reliably in both vacuum conditions and high oxygen concentrations. Direct interface with microcontrollers, including Arduino and Raspberry Pi. [See More]
- Gas Types: O2 (0—25% O2)
- Operating Temperature: -22 to 140
- Electrical Outputs: Voltage
from Sensore Electronic GmbH
The Sensore SO-D0-XXX-AXXXC M16 Thread Oxygen Sensor is a stainless steel, threaded solution designed for accurate and stable oxygen measurement across a wide range of industries, including medical, laboratory, food processing, measuring instrumentation, security technology, and the electrical... [See More]
- Gas Types: O2 (10 ppm to 96% oxygen)
- Electrical Outputs: Current
- Sensor Technology: Zirconium Dioxide (ZrO₂) sensor technology
- Operating Temperature: 158
from CO2Meter.com
The CM-1652 Carbon Dioxide and Oxygen Welding Gas Analyzer provides customers with advanced analysis of active welding gas blends that contain 0-50% carbon dioxide and 0-25% oxygen. This device verifies the most common gas mixtures in the industry and will set the main targets that meet AWS... [See More]
- Gas Types: CO2; O2 (Carbon Dioxide and Oxygen Welding Gas Analyzer)
- Number of Gases Monitored: Single
from Acme Engineering Products
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. . The 4-20mA transmitter is designed for standard 2-wire loop-powered operation where the output is supplied via the same pair of... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 PPM); CO (0-200 PPM); Cl2 (0-5 PPM); H2 (0-1000 PPM); H2S (0-200 PPM); NO2 (0-10 PPM); O2 (0-25 %); SO2 (0-10 PPM)
- Number of Gases Monitored: Multi
- Sensor Technology: Electrochemical
- Measurement Type: Trace
from DigiKey
Oxygen Sensor Current [See More]
- Gas Types: O2
- Operating Temperature: -22 to 122
- Electrical Outputs: Current
from Dynament
Dynament ’s Flameproof Fixed Gas Detectors are specifically designed for use in potentially explosive atmospheres where the risk of ignition from electrical equipment sparks is a critical safety concern. These detectors comply with requirements to enclose electrical components within... [See More]
- Gas Types: Toxic; Combustible; CO2; Hydrocarbons; H2; O2
- Electrical Outputs: Current
- Sensor Technology: NDIR Infrared, Electrochemical or Pellistor
- Features: Hazardous Environment
from Analytical Industries Inc.
Key features. Signal Output: 3.5 - 5.5 mV. Measuring Range: 0-100% O2. Response Time: 13 seconds to reach 90% of the final value. Accuracy: ±1% Full Scale (FS). Humidity Range: Non-condensing, 0-99% RH. Electrical Connections: 4 Pin Molex. Oxygen sensor for use in: Analytical Industries... [See More]
- Gas Types: O2 (0-100% O2)
- Operating Humidity: 0 to 99
from SST Sensing Ltd.
Details. Efficient gas sample management with flow-through housing. Minimal interference from other gases. Compliant with RoHS & REACH regulations. Operates seamlessly in vacuum and high-oxygen environments. Compatible with microcontrollers like Arduino and Raspberry Pi. Delivers accurate... [See More]
- Gas Types: O2 (0—25% O2)
- Operating Temperature: 50 to 113
- Electrical Outputs: Voltage
from Sensore Electronic GmbH
The M18 ALU Sinter Cap SO ‑D3 is a high-performance oxygen sensor featuring zirconium dioxide technology for precise O ₂ measurement in industrial applications. Its durable design ensures reliable performance, fast response, and long service life. The SO-D3 series ensures reliable... [See More]
- Gas Types: O2
- Electrical Outputs: Current
- Sensor Technology: zirconium dioxide technology
- Operating Temperature: 158
from CO2Meter.com
The Fixed Oxygen (O2) Gas Detector (MSC2 + SC2-E1195-A2-P-00) is designed to protect individuals near toxic gases in commercial and industrial applications. This fixed gas safety monitor measures nitrogen, helium, oxygen (0-25%), and argon levels and detects hazards in order to protect facilities... [See More]
- Gas Types: CO2; O2 (0-25%)
- Measurement Type: %Volume
- Number of Gases Monitored: Single
- Operating Temperature: -13 to 140
from Acme Engineering Products
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900... [See More]
- Gas Types: Toxic; Combustible; CO2; CO; Refrigerants; Hydrocarbons; H2; H2S; NO2; O2
- Number of Gases Monitored: Multi
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature)
- Measurement Type: Trace
from DigiKey
Oxygen Sensor Current [See More]
- Gas Types: O2
- Operating Temperature: -40 to 140
- Electrical Outputs: Current
from Dynament
The Dynament FGD14 series consists of standalone gas detectors featuring a front panel display that clearly shows the gas concentration level. These detectors are equipped with two control relays, which can be triggered based on user-defined alarm set points, allowing the relay contacts to control... [See More]
- Gas Types: Toxic; CO2; CO; Cl2; H2S; O2; SO2
- Operating Temperature: 14 to 104
- Sensor Technology: NDIR Infrared or Electrochemical
- Operating Humidity: 0 to 95
from Analytical Industries Inc.
Key features. Measuring Range: 0-100%. Signal Output: 3.5 - 5.5 mV. Response Time T90: 9 sec. Accuracy: +/-2% of Full Scale. Operating Temp : 0 to 45 °C. Connector Type: Phono Jack 3.5. Humidity Non-condensing: 0-99% RH. OEM Equipment: Analytical Industries – AII-3000-AD Analytical... [See More]
- Gas Types: O2 (0-100%)
- Electrical Outputs: Voltage
- Sensor Technology: Echem
- Operating Temperature: 32 to 113
from SST Sensing Ltd.
Details. Gas-tight rear design simplifies sample handling. Minimal cross-sensitivity to other gases. Fully RoHS and REACH compliant. Operates in vacuum and high O ₂ environments. Direct interface with microcontrollers (e.g., Arduino, Raspberry Pi). Outputs: %O ₂, ppO ₂,... [See More]
- Gas Types: O2 (0—25% O2)
- Operating Temperature: 86 to 140
- Electrical Outputs: Voltage
from Sensore Electronic GmbH
The Sensore SO-A0-XXX Micro Oxygen Sensor utilises advanced Zirconium Dioxide (ZrO ₂) technology to deliver precise, stable oxygen concentration measurements across a wide range of industrial and scientific applications. This compact sensor is engineered for reliability and accuracy, making it... [See More]
- Gas Types: O2 (100 ppm to 96% oxygen)
- Electrical Outputs: Current
- Sensor Technology: Zirconium Dioxide (ZrO₂) technology
- Operating Temperature: 482
from CO2Meter.com
The CM-200 Gas Sensor Development Kit is a PCB developed to help customers, students, researchers, OEMs and hobbyists go from concept to product as quickly as possible. This PCB can interface with our free GasLab ® Data logging software or any terminal application to evaluate sensors and view... [See More]
- Gas Types: O2 (Oxygen Sensor Module - Gas Sensor Development Kit)
- Number of Gases Monitored: Single
from Acme Engineering Products
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless medium. The WS Wireless GasPost Sensor / Transmitter includes a high gain antenna... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 PPM); CO (0-200 PPM); Hydrocarbons (0-40% LEL); H2 (0-1000 PPM); H2S (0-200 PPM); NO2 (0-10 PPM); O2 (0-25%)
- Number of Gases Monitored: Multi
- Sensor Technology: Catalytic (optional feature); Electrochemical (optional feature)
- Measurement Type: %LEL or %LFL; Trace
from DigiKey
Oxygen Sensor Current [See More]
- Gas Types: O2
- Operating Temperature: -22 to 122
- Electrical Outputs: Current
from Dynament
Dynament ’s intrinsically safe fixed gas detectors are specifically engineered for use in hazardous environments where there is a potential risk of explosion due to flammable gases or vapours. These environments may result from industrial processes in sectors such as water treatment,... [See More]
- Gas Types: Toxic; Combustible; Hydrocarbons; O2
- Features: Hazardous Environment; Intrinsically Safe
from Analytical Industries Inc.
Key features. Signal Output: 10-14 mV. Measuring Range: 0-100% O2. Response Time: 13 Seconds to reach 90% of the final value. Accuracy: ±1% Full Scale (FS), ±5% FS over the operating range. Humidity Range: Non-condensing, 0-99% RH. Electrical Connections: 2 Pin Female. Oxygen sensor... [See More]
- Gas Types: O2 (0-100% O2)
- Electrical Outputs: Voltage
- Sensor Technology: Echem
- Operating Temperature: 32 to 113
from SST Sensing Ltd.
Details. Compact Industrial Miniature Zirconia Oxygen Sensor. Measurement Range: 0.1 to 100% O ₂ (2 mbar to 3 bar partial pressure with interface electronics). Linearity: Consistent, linear output across the full measurement range. Reference Gas: Not required. Sensor Diameter: 12 mm. Operating... [See More]
- Gas Types: (0.1 to 100% O₂ (2 mbar to 3 bar partial pressure with interface electronics)); O2 (0.1 to 100% O₂ (2 mbar to 3 bar partial pressure with interface electronics))
- Operating Temperature: -148 to 482
from Sensore Electronic GmbH
The Sensore SO-B0-xxx Mini Oxygen Sensor (Board Mount) is engineered for direct PCB integration and offers precise oxygen measurement for a wide range of industrial and commercial applications. Its low surface temperature ( <70 °C) makes it suitable for compact system designs requiring... [See More]
- Gas Types: O2 (10 ppm to 96% oxygen)
- Electrical Outputs: Current
- Sensor Technology: Zirconium Dioxide (ZrO₂) technology
- Operating Temperature: 158
from CO2Meter.com
The HSA Oxygen and Carbon Dioxide Headspace Analyzer (TSA-HSA) is designed to provide accurate real-time measurements and determination of O2 and CO2 gas in the headspace of cans and bottles. This portable O2 and CO2 Headspace Analyzer will verify and conduct a measurement of headspace gas in just... [See More]
- Gas Types: CO2; O2 (Headspace volume [ml] 5-30 O2 concentration [mg/L] 0 - 0,1 Foreign gases [mL/L] 0-1)
- Measurement Type: %Volume
- Number of Gases Monitored: Single
from DigiKey
SENSOR OXYGEN CURRENT OUTPUT [See More]
- Gas Types: O2
- Operating Temperature: -4 to 122
- Electrical Outputs: Current
from Analytical Industries Inc.
Key features. Signal Output: 4-8 mV. Measuring Range: 0-100% O2. Response Time: 13 Seconds to reach 90% of the final value. Accuracy: ±1% Full Scale (FS), ±5% FS over the operating range. Humidity Range: Non-condensing, 0-99% RH. Electrical Connections: 2 Pin Female. Oxygen sensor for... [See More]
- Gas Types: O2 (0-100% O2)
- Operating Humidity: 0 to 99
- Electrical Outputs: Voltage
from SST Sensing Ltd.
Details. Provides the electronics necessary to power and control PST ’s range of zirconia (ZrO2) sensors. Built in pressure sensor for barometric pressure compensation. Interface mounted screw terminals for easy wiring with reverse voltage and transient overvoltage. The OXY-LC Oxygen Sensor... [See More]
- Gas Types: O2
from Sensore Electronic GmbH
The Sensore SO-E2-xxx-D040C Mini Oxygen Sensor with Cable is designed for accurate and reliable oxygen concentration measurement across a wide range of applications, including medical devices such as oxygen concentrators, laboratory instrumentation, and food processing systems. Utilising advanced... [See More]
- Gas Types: O2 (100 ppm to 96% oxygen)
- Electrical Outputs: Current
- Sensor Technology: Zirconium Dioxide (ZrO₂) sensor technology
- Operating Temperature: 158
from CO2Meter.com
The LOX-O2 UV Flux 25% Oxygen Sensor (formerly known as OX-0052) is designed to be used anywhere 0-25% oxygen levels are required. This makes it a valuable safety sensor anywhere inert gases are stored or used. The sensor benefits from lower power requirements than electrochemical and galvanic... [See More]
- Gas Types: O2 (0.1 to 25% O2)
- Measurement Type: %Volume
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
Gasboard7500C is an economical oxygen sensor used to detect oxygen concentration and gas flow in binary gases. Adopting ultrasonic detecting technology, It has better performance than electro-chemical and other oxygen sensors. It has function including data display, online monitoring and has been... [See More]
- Gas Types: O2 (0~100%)
- Number of Gases Monitored: Single
- Sensor Technology: Ultrasonic
- Measurement Type: %Volume
from Teledyne Monitor Labs, Inc.
The SM425 is ideally suited for both. compliance monitoring of diluent gas. (Environmental Compliance) and Oxygen. monitoring for combustion and process. control applications. The SM425. offers state of the art oxygen analysis. and a rugged industrial design. Operators and engineers will appreciate. [See More]
- Gas Types: O2 (0-5 ,0-100 vol %)
- Number of Gases Monitored: Single
- Sensor Technology: Fuel Cell
- Measurement Type: %Volume
from Terra Universal, Inc.
Complete, easy-to-use sampling and analysis system. Detects and measures hazardous gases and vapors. Certified by the Safety Equipment Institute (SEI). Ideal for monitoring performance of Terra Exhaust Purification Filters. The most cost effective solution to air sampling and analysis. This Toxic... [See More]
- Gas Types: Toxic; O2 (2 to 24 %)
- Number of Gases Monitored: Single
- Sensor Technology: Colorimetric Stain
- Measurement Type: Trace
from Sensidyne, LP
Detector tubes provide fast, economical monitoring for a wide variety of target gases and vapors. Their direct reading capability provides on-the-spot results eliminating laboratory turnaround time. The tubes are typically calibrated in one of three commonly used units of concentration. [See More]
- Gas Types: Toxic; Combustible; O2 (2-24%)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical; Gas Chromatography
- Measurement Type: Trace
from Global Detection Systems Corp.
The GDS-49 is a two-wire loop-powered 4-20mA sensor transmitter designed to detect a wide range of toxic gases at ppm levels. The current loop output is compatible with the C1 Protector, C2 Protector, C2 Quad Protector or C64 Protector Controllers, the GASMAX II or GASMAX CX gas monitors or any... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-100 ppm); AsH3 (0-1 ppm); CO (0-300/1000 ppm); Cl2 (0-5/50 ppm); ClO2 (0-1 ppm); F (0-1 ppm); H2 (0-2000 ppm); HCl (0-30 ppm); HCN (0-50 ppm); HF (0-10 ppm); H2S (0-50/100 ppm); NO (0-100/500 ppm); NO2 (0-5/50 ppm); O2 (0-25%); O3 (0-1 ppm); SiH4 (0-50 ppm); SO2 (0-20/100 ppm) (COCI2 0-1ppm N2H4 0-1ppm TBM 0-14ppm)
- Number of Gases Monitored: Multi
- Sensor Technology: Electrochemical
- Measurement Type: %LEL or %LFL (optional feature); Trace (optional feature)
from Linde North America, Inc.
G-TECTA ™ Cellaguard ™ is a carbon dioxide (CO[2]) or a carbon dioxide and oxygen (O[2]) fixed monitoring system, designed to monitor gas levels in a confined space such as a beer cellar. The Cellaguard system consists of a wall mounted base station, housing the gas monitoring system,... [See More]
- Gas Types: CO2; O2
- Operating Temperature: 37 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 0 to 95
from Anton Paar
CboxQC ™ At-line is the combined portable CO2 and O2 meter for measurement directly from process lines, tanks, kegs and casks during production and bottling. For the utmost flexibility, the instrument ’s new and robust design is small, compact and lightweight and therefore fully... [See More]
- Gas Types: CO2 (0 g/L to 12 g/L); O2 (0ppm to 4ppm)
- Number of Gases Monitored: Multi
- Sensor Technology: Electrochemical
- Measurement Type: Trace; Leakage
from Honeywell Analytics, Inc.
The Sensepoint XCD transmitter provides comprehensive monitoring of combustible, toxic and Oxygen gas hazards in potentially explosive atmospheres, indoors and outdoors —and is marked by installation ease and flexibility, user-friendly operation and cost-effective gas monitoring. Sensepoint... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-50PPM); CO (0-200 PPM / 0-500 PPM); Cl2 (0-5 PPM / 0-15 PPM); Hydrocarbons (0-100% LEL); H2 (0-1000 PPM); H2S (0-50 PPM / 0-100 PPM / 0-20 PPM); NO2 (0-10 PPM); O2 (0-25% VOL); SO2 (0-15 PPM / 0-50 PPM)
- Number of Gases Monitored: Single
- Sensor Technology: Catalytic; Electrochemical
- Measurement Type: %LEL or %LFL; %Volume; Trace
from Delphian Corporation
The CommonSensor allows the user control over the cost of sensor use. By having the ability to replace sensor elements and flame arrestors, instead of the whole sensor, the user can keep the system operational with less expenditure for spares and labor. [See More]
- Gas Types: O2 (0-30%)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical
- Measurement Type: %Volume
from Analytical Systems Int’l. Keco
The regulated d.c. power supply provides a constant standing voltage. The gas diffuses through a porous filter and contacts the surface of the sensor element. A change in resistance occurs that is proportional to the concentration at gas applied. This signal is then amplified and sent to the... [See More]
- Gas Types: Toxic; Combustible; CO2; CO; Cl2; H2S; O2; SO2
- Number of Gases Monitored: Multi
- Sensor Technology: Catalytic; Electrochemical
- Measurement Type: %LEL or %LFL
from Eagle Eye Power Solutions, LLC
The Eagle Eye HGD-2000 Hydrogen Gas Detector allows the user to monitor hydrogen gas buildup in storage room and facilities that house batteries - including forklifts, golf carts, backup power supplies, and battery charging stations. Lead-acid batteries on charge emit hydrogen gas after reaching the... [See More]
- Gas Types: Combustible; H2; Hg; Methane (CH4) / Natural Gas; O2
- Measurement Type: %LEL or %LFL
- Number of Gases Monitored: Single; Multi
- Electrical Outputs: Switch or Relay
from BlueSens Gas Sensor GmbH
Hardly any other element is so thoroughly connected to life as oxygen is. Its measurement plays a central role in the control of biological processes. With this favourably priced O2 analyzer the oxygen content can be determined online in an uncomplicated and reliable manner. This oxygen analyzer... [See More]
- Gas Types: O2
from Conspec Controls Inc.
CONSPEC's CN Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CN Series is a simple and "smart" gas detector. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for... [See More]
- Gas Types: Combustible; O2
- Number of Gases Monitored: Single
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
- Measurement Type: Trace
from First Sensor AG
The XYO optical oxygen sensors measure ambient oxygen partial pressure (ppO2) using the principle of fluorescence quenching by oxygen. An optional pressure sensor allows to also measure barometric pressure (mbar) and to convert the ppO2 reading to an oxygen concentration (O2%). The oxygen sensors... [See More]
- Gas Types: O2 (0-25 %)
- Number of Gases Monitored: Single
- Sensor Technology: Fluorescence Quenching
- Measurement Type: %Volume
from Clark Solutions
The FYA600-Series sensors are ideal for monitoring the amount of gases in the ambient environment. The measurement of these critical gases is useful for monitoring air quality, particularly in environmental chambers and incubators in which the development of organisms is critical. Standard sensor... [See More]
- Gas Types: O2 (0 to 100%)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical
- Measurement Type: %Volume
from Det-Tronics
The Det-Tronics GT3000 line of electrochemical fixed-point toxic-gas detectors provides continuous monitoring of the atmosphere for potentially hazardous toxic gas leaks or oxygen depletion. The GT3000 family currently includes sensors that detect each of the following gases (additional gases added... [See More]
- Gas Types: Toxic; NH3 (0-100ppm); CO (0-500ppm); Cl2 (0-10ppm); H2S (0-50 ppm; 0-100 ppm); O2 (0-25%); SO2 (0-20 ppm)
- Number of Gases Monitored: Multi
- Sensor Technology: Electrochemical
- Measurement Type: %Volume; Trace
from Edgetech Instruments Inc.
4-20 mA Loop Powered Two Wire Oxygen Transmitter. The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument. Measuring Range. The unit will... [See More]
- Gas Types: Combustible; O2 (0-10000 ppm or 0-25%)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical; Micro-Fuel Cell
- Measurement Type: Trace
from Emerson Automation Solutions – Rosemount
This multi-component QCL represents the next generation of gas analyzers and sensors, with the ability to measure up to 20 gases and an interchangeable modular configuration for up to 9 lasers. An embedded ARM processor gives fully autonomous intelligent operation. Key Features/Benefits: Measure up... [See More]
- Gas Types: Combustible; NH3 (0-4000 ppm); CO2 (0-30%); CO (0-20000 ppm); Hydrocarbons (0-200 ppm); HCl (0-2000 ppm); HF (0-50 ppm); H2S (0-50000 ppm); Methane (CH4) / Natural Gas (0-20000 ppm); NO (0-10000 ppm); NO2 (0-2000 ppm); NxOx (0-10000 ppm); O2 (0-100%); SO2 (0-4000 ppm); Water Vapor (0-40%) (Formaldehyde 0-100ppm, Hydrogen Peroxide 0-800ppm, Methanol 0-120 ppm, Nitromethane 0-120ppm)
- Number of Gases Monitored: Multi
- Sensor Technology: Infrared
- Measurement Type: %Volume; Trace
from RainWise, Inc.
Rainwise offers customized turnkey weather monitoring solution. [See More]
- Gas Types: Toxic (optional feature); Combustible (optional feature); NH3 (Contact Factory); AsH3 (Contact Factory); Br2 (Contact Factory); CO (Contact Factory); Cl2 (Contact Factory); ClO2 (Contact Factory); B2H6 (Contact Factory); F (Contact Factory); GeH4 (Contact Factory); H2 (Contact Factory); HCl (Contact Factory); HCN (Contact Factory); HF (Contact Factory); H2Se (Contact Factory); H2S (Contact Factory); NO (Contact Factory); NO2 (Contact Factory); O2 (Contact Factory); O3 (Contact Factory); PH3 (Contact Factory); SiH4 (Contact Factory); SO2 (Contact Factory)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical
- Measurement Type: %LEL or %LFL; Trace
from Cubic Sensor and Instrument Co.,Ltd.
Gasboard 7500E can be used to measure the gas flow and oxygen concentration based on the ultrasonic technology, which has better performance than electro-chemical and other oxygen sensors. With the function of data display, online monitoring, etc., it has been widely used in home and medical oxygen... [See More]
- Gas Types: O2 (0~100%)
- Number of Gases Monitored: Single
- Sensor Technology: Ultrasonic
- Measurement Type: %Volume
from Sensidyne, LP
Min. Indicated Concentration Change ......... 0.1 %vol. Span Drift .................................................. < 10% change per year (typical). Response Time (Rise) ................................. T90: < 10 seconds (from 0 to 20.9 %vol O2). Temperature Range... [See More]
- Gas Types: Combustible; O2 (0-25%Volume)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical
- Measurement Type: %Volume
from Linde North America, Inc.
G-TECTA ™ 4GP is an extremely robust 4 gas instrument with built in pump and charger. The single button operation and full data management allows the users to effectively manage their gas detection requirements with confidence. G-TECTA 4GP has infrared communication, full functional capability... [See More]
- Gas Types: Toxic; Combustible; NH3; CO; Cl2; H2; HCN; HF; H2S; Methane (CH4) / Natural Gas; NO; NO2; O2; O3; PH3; SO2
- Measurement Type: %LEL or %LFL
- Number of Gases Monitored: Multi
- Operating Temperature: -4 to 131
from Anton Paar
CboxQC ™ is the precise combined CO2 and O2 meter which allows reliable QC on finished packages as well as highly accurate measurements in the laboratory for product development. [See More]
- Gas Types: CO2 (0 g/L to 20 g/L); O2 (+/- 20 ppb)
- Number of Gases Monitored: Multi
- Sensor Technology: Electrochemical
- Measurement Type: Trace; Leakage
from Honeywell Analytics, Inc.
Highest performance fixed flammable and toxic gas detector with a choice of communication outputs, accessories and installation flexibility. Apex takes the best elements of gas detection design and combining them into one unit. Apex provides the highest performance, installation flexibility, a wide... [See More]
- Gas Types: Toxic; Combustible; NH3 (0-50 PPM / 0-1000 PPM); AsH3 (0-0.2 PPM); Br2 (0-0.4 PPM); CO (0-100 PPM / 0-500 PPM); Cl2 (0-2 PPM / 0-15 PPM); ClO2 (0-0.4 PPM); B2H6 (0-0.4 PPM); F (0-4 PPM); GeH4 (0-0.8 PPM); Hydrocarbons (0-100% LEL); H2 (0-1000 PPM); HCl (0-20 PPM); HCN (0-20 PPM); HF (0-12 PPM); H2S (0-15 PPM / 0-100 PPM); NO (0-100 PPM); NO2 (0-12 PPM); O2 (0-21 % v/v); O3 (0-4 PPM); PH3 (0-1.2 PPM); SiH4 (0-20 PPM); SO2 (0-8 PPM / 0-50 PPM) (Many other toxic gases- see datasheet)
- Number of Gases Monitored: Multi
- Sensor Technology: Catalytic; Electrochemical
- Measurement Type: %LEL or %LFL; %Volume; Trace
from Conspec Controls Inc.
CONSPEC's CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and "smart" gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS... [See More]
- Gas Types: Combustible; O2
- Number of Gases Monitored: Single
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
- Measurement Type: Trace
from First Sensor AG
The XYA oxygen sensors are based on a special zirconium dioxide (ZrO2) technology to enable highly stable and accurate measurements from 0...100 %Vol. oxygen concentration. These sensors are non-consumptive and feature easy calibration in ambient air. Typical applications include medical technology,... [See More]
- Gas Types: O2 (0-100 %)
- Number of Gases Monitored: Single
- Sensor Technology: Zirconium Dioxide (ZrO2)
- Measurement Type: %Volume
from Edgetech Instruments Inc.
4-20 mA Loop Powered Two Wire Oxygen Transmitter. The Edgetech Instruments Model OxyTrans is an easy to use, accurate and economical way to measure Oxygen at trace and % levels. A simple display and one point calibration allows for a quick start of the instrument. Measuring Range. The unit will... [See More]
- Gas Types: Combustible; O2 (0-10000 ppm or 0-25%)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical; Special Fuel Cell
- Measurement Type: %Volume; Trace
from Cubic Sensor and Instrument Co.,Ltd.
It is an economical gas sensor used to detect oxygen concentration in binary gases. Adopting ultrasonic detecting technology, it is very stable and there is no need to calibrate the sensor in the application. It is mainly designed for ventilator oxygen concentration measurement with high flow range... [See More]
- Gas Types: O2 (0~100%)
- Number of Gases Monitored: Single
- Sensor Technology: Ultrasonic
- Measurement Type: %Volume
from Sensidyne, LP
Smart Sensor Technology enables SensAlertPlus to automatically recognize and configure to the gas type and range of the sensor, using the latest calibration data. The Predictive Sensor Failure (PSF) function provides warning of approaching sensor end-of-life. Non-volatile memory stores calibration... [See More]
- Gas Types: Combustible; O2 (0-25%Volume)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical
- Measurement Type: %Volume
from Linde North America, Inc.
The G-TECTA ™ SG2 instrument offers the user a simple to use, low maintenance disposable gas detector with a warranted 2 year life. Designed to resist the most arduous environments and to be used with basic training, the G-TECTA SG2 is ideal for contract work and where limited functionality is... [See More]
- Gas Types: NH3; CO; Cl2; H2S; O2; SO2
- Operating Temperature: -4 to 122
- Number of Gases Monitored: Single
- Operating Humidity: 5 to 95
from Honeywell Analytics, Inc.
Acts as the nerve center of a modular gas detection network by providing continuous monitoring of up to 96 sensors. The Manning AirAlertTM 96d multichannel gas monitoring system is designed for installation and operational simplicity for continuous monitoring and control of toxic gases, combustible... [See More]
- Gas Types: Combustible; CO2; CO; Cl2; H2; O2
- Number of Gases Monitored: Multi
- Sensor Technology: Electrochemical
- Electrical Outputs: Voltage; Switch or Relay
from Conspec Controls Inc.
CONSPEC Controls Multi-Channel Controller is a microprocessor-based multi-analog input controller. The P2259/60 was designed to be an independent stand-alone controller but can integrate into any type of data acquisition system. The Controller can provide up to eight channels of remote monitoring... [See More]
- Gas Types: Combustible; Aerosols; NH3; AsH3; Br2; CO2; CO; Cl2; ClO2; B2H6; F; GeH4; Refrigerants; Hydrocarbons; H2; HCl; HCN; HF; H2Se; H2S; NO; NO2; O2; O3; PH3; SiH4; SO2; SF6
- Number of Gases Monitored: Multi
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
- Measurement Type: %LEL or %LFL; %Volume; Trace
from Edgetech Instruments Inc.
The Edgetech Instruments Model OxyTrans-PSS is a portable oxygen transmitter that is fast responding, accurate and is capable of measuring oxygen at trace or percent levels. The OxyTrans-PSS has the capability of measuring oxygen between 0 - 10,000 ppm or 0-25 % and offers ease of operation with a... [See More]
- Gas Types: O2 (0-10000 ppm or 0-25%)
- Number of Gases Monitored: Single
- Sensor Technology: Electrochemical; Micro-Fuel Cell
- Measurement Type: %Volume; Trace
from Honeywell Analytics, Inc.
Remotely monitor toxic gases in Class 1, Div 2 areas while reducing the maintenance, training and overall cost of gas monitoring. Sensepoint XCD RTD from Honeywell Analytics makes it easy on your maintenance team, time and budget when faced with the challenge of monitoring toxic gases in Class I,... [See More]
- Gas Types: Toxic; NH3 (0-50 PPM); CO (0-200 PPM); Cl2 (0-5 PPM); H2S (0-50 PPM); NO (0-100 PPM); NO2 (0-10 PPM); O2 (0-25%); SO2 (0-15 PPM)
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Multi
- Electrical Outputs: Voltage; Current
from Conspec Controls Inc.
CONSPEC's Single Channel Controllers are single point monitoring and control processors, which are housed in a NEMA 4-4X weatherproof non-metallic enclosure and are designed to monitor and display any voltage or current input signal from any instrument, including CONSPEC's EZ-CAL Toxic and... [See More]
- Gas Types: Toxic; Combustible; Aerosols; NH3 (0-50, 100, 200, 500ppm); AsH3; Br2 (0-10ppm); CO2 (0-2000ppm, 10000ppm 0-2%, 0-5%, 0-100%); CO (0-50, 100, 200, 500, 1000, 10000, 50000); Cl2 (0-10, 20ppm); ClO2 (0-5 ppm); B2H6; F; GeH4; Refrigerants; Hydrocarbons (0-100% LEL or 0-100% Vol.); H2 (0-2000, 10,000ppm 0-4%); HCl (0-25, 100, 150ppm); HCN; HF; H2Se; H2S (0-25, 50, 100, 200ppm); NO (0-50, 100ppm); NO2 (0-20ppm); O2 (0-25, 100%); O3 (0-2, 5ppm); PH3; SiH4; SO2 (0-10, 100, 1000, 2000ppm); SF6
- Number of Gases Monitored: Single
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
- Measurement Type: %LEL or %LFL; %Volume; Trace
from Honeywell Analytics, Inc.
ATEX certified flammable, toxic and Oxygen gas detectors offering a low cost solution to hazardous area monitoring. The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially... [See More]
- Gas Types: Combustible; NH3 (0-50 PPM / 0-1000 PPM); CO (0-200 PPM / 0-500 PPM); Cl2 (0-5 PPM / 0-15 PPM); Hydrocarbons (0-100% LEL); H2 (0-1000 PPM); H2S (0-20 PPM / 0-50 PPM/ 0-100 PPM); NO2 (0-10 PPM); O2 (0-25% VOL); SO2 (0-15 PPM / 0-50 PPM)
- Number of Gases Monitored: Single
- Sensor Technology: Catalytic
- Measurement Type: %LEL or %LFL; Trace
from Conspec Controls Inc.
CONSPEC Controls Multi-Channel Controller is a microprocessor-based multi-analog input controller. The P2260 was designed to be an independent stand-alone controller but can integrate into any type of data acquisition system. The Controller can provide up to sixteen channels of remote monitoring and... [See More]
- Gas Types: Combustible; Aerosols; NH3; AsH3; Br2; CO2; CO; Cl2; ClO2; B2H6; F; GeH4; Refrigerants; Hydrocarbons; H2; HCl; HCN; HF; H2Se; H2S; NO; NO2; O2; O3; PH3; SiH4; SO2; SF6
- Number of Gases Monitored: Multi
- Sensor Technology: Catalytic; Electrochemical; Infrared; PID; Thermal Conductivity
- Measurement Type: %LEL or %LFL; %Volume; Trace