Spur Gear Metric Gears
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Gear Type: Spur; Rack; Pinion
- Pressure Angle: 20°
- Number of Teeth: 10
- PD: 5
from RS Components, Ltd.
Steel Spur Gear 12 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 12
- Number of Teeth: 12
- Face Width: 15
from KHK USA, Inc.
Small module brass spur gears suitable for mating with DS gears. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 15
- PD: 7.5
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Gear Type: Spur
- Pressure Angle: 20°
- Number of Teeth: 12 to 127
- Gear Center: Center Bore
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Gear Type: Spur; Rack
- Pressure Angle: 20°
- Number of Teeth: 20
- PD: 63.66
from RS Components, Ltd.
Steel Spur Gear 13 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 13
- Number of Teeth: 13
- Face Width: 15
from KHK USA, Inc.
Low cost, mass-produced products suitable for light duty office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 12
- PD: 6
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Gear Type: Spur; Rack
- Pressure Angle: 20°
- Number of Teeth: 100
- PD: 40
from RS Components, Ltd.
Steel Spur Gear 14 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 14
- Number of Teeth: 14
- Face Width: 15
from KHK USA, Inc.
These fine pitch, acetal spur gears have an integral stainless steel hub locking mechanism which enables the gear to be fastened to the shaft without any keys or set screws. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- PD: 50
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Gear Type: Spur; Rack
- Pressure Angle: 20°
- Number of Teeth: 100
- PD: 40
from RS Components, Ltd.
Steel Spur Gear 15 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 15
- Number of Teeth: 15
- Face Width: 15
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- PD: 30
from RS Components, Ltd.
Steel Spur Gear 16 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 16
- Number of Teeth: 16
- Face Width: 15
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a made to order custom basis once current inventory runs out. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from RS Components, Ltd.
Steel Spur Gear 18 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 18
- Number of Teeth: 18
- Face Width: 15
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a made to order custom basis once current inventory runs out. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Features: Ground Teeth
from RS Components, Ltd.
Steel Spur Gear 20 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 20
- Number of Teeth: 20
- Face Width: 15
from KHK USA, Inc.
The LS Sintered Spur Gears are made from pressed metal. These gears have a lower cost due to elimination of machining and reduction in wasted material. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 12
- PD: 6
from RS Components, Ltd.
Steel Spur Gear 22 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 22
- Number of Teeth: 22
- Face Width: 15
from KHK USA, Inc.
The MSGA & MSGB Ground Spur Gears are made from a chrome-alloy steel and are carburized and ground finished. This results in a high-strength, abrasion-resistant and compact designed Spur Gear. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Features: Ground Teeth
from RS Components, Ltd.
Steel Spur Gear 24 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 24
- Number of Teeth: 24
- Face Width: 15
from KHK USA, Inc.
Nylon teeth with steel hubs that can have keyways and set screws added. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- PD: 100
from RS Components, Ltd.
Steel Spur Gear 25 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 25
- Number of Teeth: 25
- Face Width: 15
from KHK USA, Inc.
Possible to operate without lubrication. Suitable for food processing machines. Finished products for J Series are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- PD: 100
from RS Components, Ltd.
Steel Spur Gear 26 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 26
- Number of Teeth: 26
- Face Width: 15
from KHK USA, Inc.
Possible to operate without lubrication. Suitable for food processing machines. Finished products for J Series are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Bore Diameter: 10
from RS Components, Ltd.
Steel Spur Gear 28 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 28
- Number of Teeth: 28
- Face Width: 15
from KHK USA, Inc.
Nylon teeth with stainless steel hubs for rust-resistance. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 30
- PD: 30
from RS Components, Ltd.
Steel Spur Gear 30 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 30
- Number of Teeth: 30
- Face Width: 15
from KHK USA, Inc.
The SS Spur Gears are made from carbon steel and are NOT hardened. However, the SS-H Spur Gears do have the gear teeth hardened. These Spur Gears are economically priced, general usage gears, with a large selection of modules and numbers of teeth. These Spur Gears are easily customizable and J... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- PD: 50
from RS Components, Ltd.
Steel Spur Gear 32 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 32
- Number of Teeth: 32
- Face Width: 15
from KHK USA, Inc.
The SS FA Spur Gears are made from carbon steel and are NOT hardened. These Spur Gears are assembled with a locking hub for the most secure fastening to your shaft. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- PD: 153
from RS Components, Ltd.
Steel Spur Gear 35 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 35
- Number of Teeth: 35
- Face Width: 15
from KHK USA, Inc.
The SSA Hubless Spur Gears are made from carbon steel and are NOT hardened. These Spur Gears are lighter weight due to their lack of a hub and are suitable for compact designs. These Hubless Spur Gears are easily customizable and J Series configurations of these Spur Gears are also... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- PD: 100
from RS Components, Ltd.
Steel Spur Gear 36 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 36
- Number of Teeth: 36
- Face Width: 15
from KHK USA, Inc.
The SSA-F Hubless Spur Gears are made from carbon steel and are NOT hardened. These Hubless Spur Gears are assembled with a locking hub for the most secure fastening to your shaft. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- PD: 200
from RS Components, Ltd.
Steel Spur Gear 40 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 40
- Number of Teeth: 40
- Face Width: 15
from KHK USA, Inc.
The SSAG Hubless Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These Spur Gears are lighter weight due to their lack of a hub and are suitable for compact designs. These Hubless Spur Gears are easily customizable since the heat treatment is applied... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 25
- PD: 25
from RS Components, Ltd.
Steel Spur Gear 45 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 45
- Number of Teeth: 45
- Face Width: 15
from KHK USA, Inc.
The SSAY Hubless Spur Gears are made from carbon steel and are NOT hardened. These Spur Gears are designed with a narrower face width than the SSA Series Spur Gears. These Spur Gears are suitable for light-duty applications. These Spur Gears are easily customizable. Please note that all J-Series,... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 28
- Bore Diameter: 6
from RS Components, Ltd.
Steel Spur Gear 48 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 48
- Number of Teeth: 48
- Face Width: 15
from KHK USA, Inc.
The SSG Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. Since the heat treatment is applied only to the tooth area, secondary operations can be preformed on the hub and bore. J Series configurations of the SSG Ground Spur Gears are available. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 30
- Features: Ground Teeth
from RS Components, Ltd.
Steel Spur Gear 50 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 50
- Number of Teeth: 50
- Face Width: 15
from KHK USA, Inc.
The SSG-R Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These pinions are designed to mate with Nabtesco Gearheads. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 50
- Features: Ground Teeth
from RS Components, Ltd.
Steel Spur Gear 55 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 55
- Number of Teeth: 55
- Face Width: 15
from KHK USA, Inc.
The SSG FA/FB Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These Spur Gears are assembled with a locking hub for the most secure fastening to your shaft. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Features: Ground Teeth
from RS Components, Ltd.
Steel Spur Gear 60 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 60
- Number of Teeth: 60
- Face Width: 15
from KHK USA, Inc.
The SSG-R Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These pinions are designed to mate with Nabtesco Gearheads. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 30
- Features: Ground Teeth
from RS Components, Ltd.
Steel Spur Gear 70 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 70
- Number of Teeth: 70
- Face Width: 15
from KHK USA, Inc.
The SSGS Ground Shaft Pinions are Spur Gears made from carbon steel, are induction hardened, and the teeth are ground finished. The shaft ends are not hardened specifically to allow modification of shafts to fit your bearings. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 10
- PD: 15
from RS Components, Ltd.
Steel Spur Gear 80 Tooth 1 Mod [See More]
- Gear Type: Spur
- PD: 80
- Number of Teeth: 80
- Face Width: 15
from KHK USA, Inc.
Allows large gear ratios. Can also be used as segment gears and corner racks. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 120
- PD: 240
from RS Components, Ltd.
Steel Spur Gear 12 Tooth 1.5 Mod [See More]
- Gear Type: Spur
- PD: 18
- Number of Teeth: 12
- Face Width: 17
from KHK USA, Inc.
The SSS Shaft Pinions are Spur Gears made from carbon steel and are NOT hardened. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a... [See More]
- Gear Type: Spur; Other; Spur Gears
- Pressure Angle: 20°; 20 º
- Number of Teeth: 10
- PD: 5
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Gear Type: Spur; Pinion
- Pressure Angle: 20°
- Number of Teeth: 25
- Features: Ground Teeth; Anti-backlash (optional feature)
from Shenzhen Besta Precision Machinery Co., Ltd.
Besta offers extensive manufacturing capabilities for helical gears in diverse sizes, types, base materials, and shaft types. We can produce large-scale helical gears, measuring up to 1200mm in diameter. Diametrical pitch can run to 1.25, with up to a 20 module. The minimum diametrical pitch of... [See More]
- Gear Type: Spur; Helical
- OD: 1600
- Module: 0.5 - 25
- Face Width: 500
from Ondrives.US Corporation, formerly Rino Mechanical
Ondrives.US has been designing, engineering, and manufacturing gears, gearboxes, and other motion transfer components for decades. If none of our standard gear options are right for your application, we can produce custom gears that meet your specifications. We can work from your part prints, or... [See More]
- Gear Type: Spur; Helical; Worm; Worm Wheel; Rack; Pinion
- Features: Anti-backlash
from Huco Dynatork
Injection moulded gears with machined bores. Pressure angle is 20 °. Suitable for running temperatures up to 100 °C with an intermittent temperature limit of 150 °C. High strength and low friction coefficient make these gears a popular choice for many applications, including underwater [See More]
- Gear Type: Spur
- Gear Center: Center Bore
- Pressure Angle: 20°
- Module: Mod 0.5 - Mod 3
from QTC METRIC GEARS
Module 0.5, 15 Teeth Brass Spur Gear with Finished Bore [See More]
- Gear Type: Spur
- Pressure Angle: 20°
- Number of Teeth: 15
- PD: 7.5
from ATLANTA Drive Systems, Inc.
We have recently expanded our range of ISO 9409-1-A flanged pinions. This allows the machine designer the flexibility of choosing the best flanged pinion to meet the application needs. The new TR flanged pinions have compact designs to reduce the amount of drive torque required. Traditionally,... [See More]
- Gear Type: Spur; Pinion
- Pressure Angle: 20°
- Number of Teeth: 17
- Features: Ground Teeth; Anti-backlash (optional feature)
from Shenzhen Besta Precision Machinery Co., Ltd.
As a full service provider of gear manufacturing services, Besta features full machining capabilities for all types of spur gears. Through nearly any process required for the end application, our spur gears are fabricated based on your needs. Our spur gears are manufactured in small or large sizes,... [See More]
- Gear Type: Spur
- OD: 1600
- Module: 0.5 - 24
- Face Width: 500
from QTC METRIC GEARS
Module 1, 45 Tooth, Duracon Spur Gear with Stainless Fairloc Hub [See More]
- Gear Type: Spur
- Pressure Angle: 20°
- Number of Teeth: 45
- PD: 45