Hub Gears
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Mounting: Hub
- Direction: Right
- Gear Type: Worm; Rack
- Pressure Angle: 20°
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Mounting: Hubless; Hub; Simple Bore
- Number of Teeth: 11 to 120
- Gear Type: Spur
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Mounting: Hub; Set Screw
- Design: English
- Gear Type: Rack
- Pressure Angle: 20°
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Mounting: Hub; Keyway
- Number of Teeth: 18 to 100
- Gear Type: Worm
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Mounting: Hub
- Design: English
- Gear Type: Rack
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Mounting: Hub
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Mounting: Hub; Hub Clamp
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Mounting: Hub
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Mounting: Hub
- Number of Teeth: 12
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 10. .104 FACE. 1/8, 3/16 & 1/4 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gears. - 303 Stainless Steel 2024-T4 or. -T351 Aluminum Alloy, anodized before cutting. - Bronze QQ-B-637 Alloy 464. Hubs. - 303 Stainless Steel Springs. - 302 Stainless... [See More]
- Mounting: Hub
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Mounting: Hub
- Number of Teeth: 12
- Gear Type: Spur; Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Mounting: Hub
- Number of Teeth: 16
- Gear Type: Rack
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Mounting: Hub
- Direction: Right
- Gear Type: Worm; Rack
- Pressure Angle: 14.5°
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Mounting: Hub
- Number of Teeth: 20
- Gear Type: Spur; Rack
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 20
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 23
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 25
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 26
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 28
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 30
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 33
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 40
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 50
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 30
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 33
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 35
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Stock Drive Products & Sterling Instrument - SDP/SI
Cluster gears are a collection of gears of different sizes mounted on the same shaft. Cluster gears are used in many different applications, such as Industrial machinery, medical equipment, and packaging equipment. Compact and accepting of both inch and metric sizes on the same shaft, cluster gears... [See More]
- Mounting: Hub
- Number of Teeth: 38
- Gear Type: Cluster; Rack
- Face Width: 0.16
from Ondrives.US Corporation, formerly Rino Mechanical
Helical cut gears are similar to spur gears with their teeth cut at an angle. The most popular helical gear design is 45 degrees. Helical cut gears can have a right hand or a left hand gear helix. When 45 ° helical gears of the opposite hand operate together they will turn parallel shafts in... [See More]
- Mounting: Hub
- Number of Teeth: 10 to 160
- Gear Type: Helical
- Design: English
from ATLANTA Drive Systems, Inc.
Atlanta standard bevel gears are made of heat-treatable steel Cf 53, material no. 1.1213, having a strength of 650- 800 N/mm ². For heavy-duty application our bevel gears may be subsequently fame or induction hardened. The following calculations therefore always refer to hardened as well as... [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 16
- Gear Type: Miter / Bevel Gear Set
- Design: Metric
from Huco Dynatork
Injection moulded gears with machined bores. Pressure angle is 20 °. Suitable for running temperatures up to 100 °C with an intermittent temperature limit of 150 °C. High strength and low friction coefficient make these gears a popular choice for many applications, including underwater [See More]
- Mounting: Hub; Simple Bore
- Design: Metric
- Gear Type: Spur
- Pressure Angle: 20°
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 32
- Gear Type: Spur
- Design: English
from QTC METRIC GEARS
Module 0.5, 15 Teeth Brass Spur Gear with Finished Bore [See More]
- Mounting: Hub; Set Screw
- Number of Teeth: 15
- Gear Type: Spur
- Design: Metric
from Martin Sprocket & Gear, Inc.
Bevel gear, 20 degree pressure angle, ratios range 1:1 to 6:1 [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 30
- Gear Type: Miter/Bevel
- Design: English
from Ondrives.US Corporation, formerly Rino Mechanical
A gear is a rotating machine part that utilizes cut teeth, or cogs, to mesh with another toothed part —usually another gear or a linear toothed part (called a gear rack) —to transmit rotational motion and torque. By using a combination of precision gears with the correct ratio, the... [See More]
- Mounting: Hub
- Design: English
- Gear Type: Spur; Rack
- Features: Anti-backlash
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Mounting: Hub; Keyway
- Number of Teeth: 25
- Gear Type: Spur; Pinion
- Design: Metric
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 52
- Gear Type: Spur
- Design: English
from QTC METRIC GEARS
Module 1, 100 Tooth Nylon Steel Core Spur Gear with Plain Bore [See More]
- Mounting: Hub
- Number of Teeth: 100
- Gear Type: Spur
- Design: Metric
from Martin Sprocket & Gear, Inc.
Martin manufactures spur gears and gear rack, bevel gears, miter gears and worm gears. With a vast inventory of raw materials, modern machine tool capacity, and a pro-service attitude, Martin makes short work of a quick delivery on all specialty gears. [See More]
- Mounting: Hub; Keyway; Set Screw
- Number of Teeth: 11
- Gear Type: Spur; Pinion (optional feature)
- Design: English
from Ondrives.US Corporation, formerly Rino Mechanical
Ondrives.US has been manufacturing worm and wheel gear systems for over 30 years. We offer worms and worm gears sets in a variety of inch and metric sizes and with numerous pitch, tooth count, and hub options. Our precision ground stainless steel worm and wheels and phosphor bronze worm gears... [See More]
- Mounting: Hub
- Number of Teeth: 20 to 360
- Gear Type: Worm; Worm Wheel
- Design: English
from ATLANTA Drive Systems, Inc.
Atlanta standard worm drives are manufactured from well- proven materials. The worm is of steel and has hardened and ground fanks. The worm gears are of special gear bronze and are provided with a grey cast iron hub in the case of larger diameters. All standard drives available from stock are of the... [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 27
- Gear Type: Worm; Worm Wheel
- Design: Metric
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 56
- Gear Type: Spur
- Design: English
from Martin Sprocket & Gear, Inc.
Miter gears, 20 degree pressure angle, 1:1 ratio [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 24
- Gear Type: Miter/Bevel
- Design: English
from ATLANTA Drive Systems, Inc.
We have recently expanded our range of ISO 9409-1-A flanged pinions. This allows the machine designer the flexibility of choosing the best flanged pinion to meet the application needs. The new TR flanged pinions have compact designs to reduce the amount of drive torque required. Traditionally,... [See More]
- Mounting: Hub; Flange
- Number of Teeth: 12
- Gear Type: Helical; Pinion
- Design: Metric
from Martin Sprocket & Gear, Inc.
Cast iron spur gears, 14.5 pressure angle, 10DP, with hubs [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 100
- Gear Type: Spur; Pinion (optional feature)
- Design: English
from Martin Sprocket & Gear, Inc.
Worm and worm gears, right handed, 14 1/2 degree pressure angle [See More]
- Mounting: Hub; Simple Bore
- Number of Teeth: 18
- Gear Type: Worm Wheel
- Design: English