20° Gears
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 14 to 60
- Gear Center: Center Bore
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Direction: Right
- Gear Type: Worm; Rack
- Gear Center: Shaft
from KHK USA, Inc.
Made of aluminum bronze, have excellent wear-resistance. Wide selection is available for this item. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Worm Gears
- Design: Metric
from Chengdu Leno Machinery Co., Ltd.
Spur gear is a kind of structure of transmission gear, which has excellent performance in acceleration, braking and control. Spur gears are widely accepted as the most efficient gear transmission solution when power needs to be transferred to another mechanical device. Benefits. Spur gear is easy to... [See More]
- Pressure Angle: 20°
- Number of Teeth: 18
- Gear Type: Spur
- Gear Center: Center Bore
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 16 to 64
- Gear Center: Center Bore
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Pressure Angle: 20°
- Number of Teeth: 10
- Gear Type: Spur; Rack; Pinion
- Design: Metric
from KHK USA, Inc.
Made of aluminum bronze, have excellent wear-resistance. Allows compact design. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Worm Gears
- Design: Metric
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 16 to 60
- Gear Center: Center Bore
from Stock Drive Products & Sterling Instrument - SDP/SI
Internal gears are spur gears with teeth on the inside of the gear as opposed to on the outside. They rotate in the same direction as the driving gear (a spur gear of the same module), turning it. They frequently serve as a component of a planetary gear configuration, in which a driving gear... [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Internal; Rack
- PD: 50
from KHK USA, Inc.
Aluminum bronze made products have excellent wear resistance. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Gear Type: Other; Screw Gears
- PD: 0.72
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Features: Rack/Rail
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Face Width: 3
- Gear Type: Rack
- Material: Stainless; Stainless Steel
from KHK USA, Inc.
Phosphorous bronze worm wheels have excellent wear resistance. Interchangeable with CG Worm Wheels, and enhances strength. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Worm Gears
- Design: Metric
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Number of Teeth: 20 to 424
- Gear Type: Rack
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. Helical gears are comparable to spur gears, but due to the higher contact ratio, they are quieter, vibrate less, and experience less friction. Helical gear pairs have the same helix angle but opposite threads (left-hand and right-hand). Helical gears... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Spur; Helical; Rack
- Direction: Left
from KHK USA, Inc.
Small module brass spur gears suitable for mating with DS gears. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 15
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Number of Teeth: 12 to 127
- Gear Type: Spur
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Face Width: 0.23
- Gear Type: Rack
from KHK USA, Inc.
Economical, commonly used worm wheels that have broad utility. Available with a large selection of modules and number of teeth. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Gear Type: Other; Worm Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Tooth Form: Straight
from KHK USA, Inc.
Injection molded, mass-produced productions, suitable for office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Tooth Form: Straight
from KHK USA, Inc.
Fine pitch worm wheels made of polyacetal, a stable plastic material. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but does have an alternate. Please see the... [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Worm Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Tooth Form: Straight
from KHK USA, Inc.
Injection molded, mass-produced products, suitable for office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Miter Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
The material of pinion wire is dragged through the dies; it is referred to as "drawn" steel, a process that begins with melting several metals together, typically iron plus an additional metal type that is a crucial part of the alloy (smelting). After being slightly cooled, the metal is then coated... [See More]
- Pressure Angle: 20°
- Number of Teeth: 10
- Gear Type: Stock; Rack
- Design: English
from KHK USA, Inc.
Low cost, mass-produced products suitable for light duty office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 12
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 0.83
from KHK USA, Inc.
These fine pitch, acetal spur gears have an integral stainless steel hub locking mechanism which enables the gear to be fastened to the shaft without any keys or set screws. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Cut continuously. Long length and bendable to a contour. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Gear Type: Other; CP Racks & Pinion
- Material: Steel; SS400 Carbon Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
Increased strength with SCM440 material which is thermal refined. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
This is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
High strength and abrasion-resistant for precision linear motion. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Gear Type: Other; CP Racks & Pinion
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Spur; Rack; Pinion
- Design: English
from KHK USA, Inc.
Heat treated ground gears with high precision and strength has excellent cost-performance ratio. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 100
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Face Width: 0.17
- Gear Type: Rack
- PD: 120
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Pressure Angle: 20°
- Shaft Diameter: 0.1247
- Gear Type: Rack
- PD: 120
from KHK USA, Inc.
Thermal refined and tooth-hardened chromolyracks, excellent in abrasion resistance. Use as mating pinions for KRCPF(-H) Racks. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is... [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 10. .104 FACE. 1/8, 3/16 & 1/4 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gears. - 303 Stainless Steel 2024-T4 or. -T351 Aluminum Alloy, anodized before cutting. - Bronze QQ-B-637 Alloy 464. Hubs. - 303 Stainless Steel Springs. - 302 Stainless... [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 9. 1/4 & 3/8 FACE. 3/8 & 1/2 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gear - Cast Nylon 12 (PA12G). Knurled Core - 303 Stainless Steel. FEATURES: Self-lubricating. Quiet operation. Precision hobbed & machined. Integral metal core. [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a made to order custom basis once current inventory runs out. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Pressure Angle: 20°
- Number of Teeth: 16
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a made to order custom basis once current inventory runs out. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 16
- Gear Type: Rack
- Design: Metric
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued. Please contact KHK for alternative... [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 10
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Number of Teeth: 20
- Gear Type: Rack
- PD: 20
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 25
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Pressure Angle: 20°
- Direction: Right
- Gear Type: Worm; Rack
- OD: 0.5830
from KHK USA, Inc.
By pairing with STRCPF rack, the backlash may be adjusted. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Number of Teeth: 20
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from QTC METRIC GEARS
Module 1, 100 Tooth, Left Handed Ground Helical Gear with Plain Bore [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Helical
- Design: Metric
from Huco Dynatork
Injection moulded gears with machined bores. Pressure angle is 20 °. Suitable for running temperatures up to 100 °C with an intermittent temperature limit of 150 °C. High strength and low friction coefficient make these gears a popular choice for many applications, including underwater [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Spur
- Gear Center: Center Bore
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 25
- Gear Type: Spur; Pinion
- Design: Metric
from Shenzhen Besta Precision Machinery Co., Ltd.
Rack and pinion is utilized to convert rotational motion to linear motion. A rack is straight teeth cut into one surface of rectangular or cylindrical rod shaped material, and a pinion is a small cylindrical gear meshing with the rack. There are many ways to categorize gears. If the relative... [See More]
- Pressure Angle: 20°
- Number of Teeth: 30 to 300
- Gear Type: Rack; Pinion
- Design: Metric
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 109
- Gear Type: Spur
- Design: English
from Boston Gear
Overview. Boston Gear's stock miter and bevel gears are specifically designed for the efficient transmission of power and motion between intersecting shafts at a right angle (90 °). Miter gears are a special type of bevel gear designed to operate in pairs with identical numbers of teeth and... [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Miter / Bevel Gear Set
- Tooth Form: Straight (optional feature); Spiral (optional feature)
from Schneeberger Inc.
Helical-toothed gear racks are available in typical industry dimensions from module 2 to module 12. The material, hardness, and accuracy determine the respective load. [See More]
- Pressure Angle: 20°
- Number of Teeth: 7 to 300
- Gear Type: Helical; Rack
- Design: Metric
from W.M. Berg
Bevel Gears are used exclusively to transmit rotary motion between intersecting shafts. Through commonly seen in right angle drives, bevel gears can be cut to drive any angle. A cross section of the gear tooth reveals a profile similar to a spur gear. However, as the tooth is generated. the cross... [See More]
- Pressure Angle: 20°
- PD: 0.62
- Gear Type: Miter/Bevel
- Bore Diameter: 0.2500
from Martin Sprocket & Gear, Inc.
Bevel gear, 20 degree pressure angle, ratios range 1:1 to 6:1 [See More]
- Pressure Angle: 20°
- Number of Teeth: 30
- Gear Type: Miter/Bevel
- Design: English
from QTC METRIC GEARS
Module 0.5, 100 Tooth Mild Steel Internal Gear [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 100
- PD: 50
from ATLANTA Drive Systems, Inc.
We have recently expanded our range of ISO 9409-1-A flanged pinions. This allows the machine designer the flexibility of choosing the best flanged pinion to meet the application needs. The new TR flanged pinions have compact designs to reduce the amount of drive torque required. Traditionally,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Helical; Pinion
- Design: Metric
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
- Design: Metric
- Gear Type: Miter / Bevel Gear Set; Hypoid
- Tooth Form: Straight; Spiral
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 18
- Gear Type: Spur
- Design: English
from Schneeberger Inc.
Straight-toothed gear racks are available in standard industrial sizes from module 2 to module 12. The material, hardness, and accuracy determine the respective load. [See More]
- Pressure Angle: 20°
- Number of Teeth: 7 to 320
- Gear Type: Rack; Other; Straight Tooth
- Design: Metric
from W.M. Berg
Spur Gears are the most recognized style of gear. Spur Gears are used exclusively to transmit rotary motion between parallel shafts, while maintaining uniform speed and torque. The involute tooth form, being the simplest to generate, permits high manufacturing tolerances to be attained. Pitch: 12 to... [See More]
- Pressure Angle: 20°
- PD: 0.75
- Gear Type: Spur
- Bore Diameter: 0.2500
from Martin Sprocket & Gear, Inc.
Machined gear rack, wide face width, 20 pressure angle [See More]
- Pressure Angle: 20°
- Design: English
- Gear Type: Rack
- Tooth Form: Straight
from QTC METRIC GEARS
Module 1.5, 1 Start Right Handed Ground Steel Worm Shaft [See More]
- Pressure Angle: 20°
- OD: 28
- Design: Metric
- Face Width: 40
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Pressure Angle: 20°
- Number of Teeth: 30
- Gear Type: Helical; Pinion
- Design: Metric
from Shenzhen Besta Precision Machinery Co., Ltd.
Besta full line of gear manufacturing services includes internal gears, in addition to our selection of conventional, external gears. Internal gears, with teeth located on the inside as opposed to the outside of the gear, are used in all industries, such as electronics and chemical applications. We... [See More]
- Pressure Angle: 14.5°; 20°; 22.5°
- Number of Teeth: 50 to 200
- Gear Type: Internal
- Design: Metric
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 28
- Gear Type: Spur
- Design: English
from W.M. Berg
Best choice of gearing when high drive reduction is required. Worm Wheels resemble spur gears with the addition of a throat cut into the O.D. of wheel. The throat permits the worm wheel to fully envelope the threads of the worm. Threads, not teeth are cut on the worm, and by adjusting the number of... [See More]
- Pressure Angle: 20°
- Length: 0.44
- Gear Type: Worm
- Material: Bronze
from Martin Sprocket & Gear, Inc.
Martin manufactures spur gears and gear rack, bevel gears, miter gears and worm gears. With a vast inventory of raw materials, modern machine tool capacity, and a pro-service attitude, Martin makes short work of a quick delivery on all specialty gears. [See More]
- Pressure Angle: 20°
- Number of Teeth: 12
- Gear Type: Spur; Pinion (optional feature)
- Design: English
from QTC METRIC GEARS
Nissei Module 1.5, 20 Tooth Alloy Steel Left Hand Threaded Spiral Miter Gear with Finished Bore [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 20
- PD: 30
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
- Design: Metric
- Gear Type: Miter / Bevel Gear Set
- Tooth Form: Straight; Spiral
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 30
- Gear Type: Spur
- Design: English
from W.M. Berg
A rack is a toothed bar or rod that can be thought of as a sector gear with an infinitely large radius of curvature. Pitch: 16 to 96 DP & 1.5 to .25 MOD. Material: Aluminum and Stainless Steel. Available in Round or Rectangular Design [See More]
- Pressure Angle: 20°
- Length: 11.19
- Gear Type: Rack
- Material: Stainless
from Martin Sprocket & Gear, Inc.
Miter gears, 20 degree pressure angle, 1:1 ratio [See More]
- Pressure Angle: 20°
- Number of Teeth: 24
- Gear Type: Miter/Bevel
- Design: English
from QTC METRIC GEARS
Module 1, 40 Tooth Nylon Bevel Gear [See More]
- Pressure Angle: 20°
- PD: 20
- Design: Metric
- Face Width: 6
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 32
- Gear Type: Spur
- Design: English
from W.M. Berg
Helical Gears are similar to spur gears with the exception that the teeth are cut at an angle to the axis of the shaft (helix angle). The helix cut creates a wider contact area enabling higher strengths and torques to be achieved. Though helical gear sets operate quieter and smoother than spur... [See More]
- Pressure Angle: 20°
- Length: 1.00
- Gear Type: Helical
from Martin Sprocket & Gear, Inc.
Cast iron spur gears, 20 pressure angle, 10DP, with hubs [See More]
- Pressure Angle: 20°
- Number of Teeth: 100
- Gear Type: Spur; Pinion (optional feature)
- Design: English
from QTC METRIC GEARS
Module 1 - 100mm Ground Alloy Steel Left Handed Helical Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 8
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 48
- Gear Type: Spur
- Design: English
from W.M. Berg
Internal Gears have the teeth generated on the I.D. of the blank. They are generally stronger and more efficient than the mating pinion gear. The pitch diameter of the internal gear must be at least 1.5 times the P.D. of the mating pinion. If this condition is not met, interferences between the tips... [See More]
- Pressure Angle: 20°
- Material: Aluminum
- PD: 0.83
from QTC METRIC GEARS
Module 2, 20 Tooth, 1 Start, Left Handed Bronze Worm Gear with Plain Bore [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 20
- PD: 40
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 52
- Gear Type: Spur
- Design: English
from W.M. Berg
Best choice of gearing when high drive reduction is required. Worm Wheels resemble spur gears with the addition of a throat cut into the O.D. of wheel. The throat permits the worm wheel to fully envelope the threads of the worm. Threads, not teeth are cut on the worm, and by adjusting the number of... [See More]
- Pressure Angle: 20°
- PD: 0.62
- Gear Type: Worm
- OD: 0.7500
from QTC METRIC GEARS
Module 0.5, 15 Teeth Brass Spur Gear with Finished Bore [See More]
- Pressure Angle: 20°
- Number of Teeth: 15
- Gear Type: Spur
- Design: Metric
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 56
- Gear Type: Spur
- Design: English
from QTC METRIC GEARS
Module 1, 45 Tooth, Duracon Spur Gear with Stainless Fairloc Hub [See More]
- Pressure Angle: 20°
- Number of Teeth: 45
- Gear Type: Spur
- Design: Metric
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Number of Teeth: 86
- Gear Type: Spur
- Design: English
from QTC METRIC GEARS
Module 0.5, 300mm Brass Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 3
from QTC METRIC GEARS
Module 1.5, 1000mm, Polyacetal Gear Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 15
from QTC METRIC GEARS
Module 1.5, 1000mm, Polyacetal Gear Rack with Mounting Holes [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Face Width: 15
from QTC METRIC GEARS
Module 1, 20 Tooth, 1 Start, Right Handed Aluminum Bronze Worm Gear with 6mm Finished Bore [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 20
- PD: 20
from QTC METRIC GEARS
Module 1, 500mm Mild Steel Round Rack [See More]
- Pressure Angle: 20°
- Design: Metric
- Gear Type: Rack
- Material: Steel
from QTC METRIC GEARS
Circular Pitch 10 - 10 Tooth Ground Steel Pinion Shaft [See More]
- Pressure Angle: 20°
- Number of Teeth: 10
- Gear Type: Pinion
- Design: Metric
from QTC METRIC GEARS
Module 0.8, 20 Tooth Sintered Metal Miter Gear [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 20
- PD: 16