Aluminum Gears
from KHK USA, Inc.
Made of aluminum bronze, have excellent wear-resistance. Wide selection is available for this item. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Aluminum; Bronze; CAC702 Aluminum Bronze (formerly JIS AℓBC2)
- Number of Teeth: 20
- Gear Type: Other; Worm Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Material: Aluminum; Aluminum (Set)
- Design: English
- Gear Type: Rack
- Pressure Angle: 20°
from KHK USA, Inc.
Duplex worm wheels made of aluminum bronze, excellent in wear-resistance. The pitch accuracy is first grade. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Aluminum; Bronze; CAC702 Aluminum Bronze (formerly JIS AℓBC2)
- Number of Teeth: 20
- Gear Type: Other; Worm Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Material: Aluminum; 2024 Aluminum Alloy
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
Made of aluminum bronze, have excellent wear-resistance. Allows compact design. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Aluminum; Bronze; CAC702 Aluminum Bronze (formerly JIS AℓBC2)
- Number of Teeth: 20
- Gear Type: Other; Worm Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Aluminum; Aluminum
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 0.17
from KHK USA, Inc.
Aluminum bronze made products have excellent wear resistance. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Aluminum; Bronze; CAC702 Aluminum Bronze (formerly JIS AℓBC2)
- Design: Metric
- Gear Type: Other; Screw Gears
- Pressure Angle: 20°; 20 º
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 10. .104 FACE. 1/8, 3/16 & 1/4 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gears. - 303 Stainless Steel 2024-T4 or. -T351 Aluminum Alloy, anodized before cutting. - Bronze QQ-B-637 Alloy 464. Hubs. - 303 Stainless Steel Springs. - 302 Stainless... [See More]
- Material: Aluminum; Stainless; Aluminum Body / Stainless Steel Hub
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Material: Aluminum; ISO 8 /Aluminum
- Number of Teeth: 20
- Gear Type: Rack
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Material: Aluminum; Acetal; Acetal Rim, Aluminum Core
- Number of Teeth: 24
- Gear Type: Spur; Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Material: Aluminum; Aluminum Set
- Number of Teeth: 24
- Gear Type: Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Internal gears are spur gears with teeth on the inside of the gear as opposed to on the outside. They rotate in the same direction as the driving gear (a spur gear of the same module), turning it. They frequently serve as a component of a planetary gear configuration, in which a driving gear... [See More]
- Material: Aluminum; 2024-T4 Aluminum
- Number of Teeth: 20
- Gear Type: Internal; Rack
- Pressure Angle: 20°
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. Helical gears are comparable to spur gears, but due to the higher contact ratio, they are quieter, vibrate less, and experience less friction. Helical gear pairs have the same helix angle but opposite threads (left-hand and right-hand). Helical gears... [See More]
- Material: Aluminum; AGMA Q10 / Aluminum
- Number of Teeth: 100
- Gear Type: Helical; Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Material: Aluminum; Aluminum Set
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 0.18
from Stock Drive Products & Sterling Instrument - SDP/SI
In a standard differential, two output shafts distribute a load imparted on them from an input shaft at different speeds. A differential contains a pinion (bevel) gear [A] on the input shaft, where the load is transmitted. The pinion mates with a [B] carrier or ring (bevel) gear at 90 °. [See More]
- Material: Aluminum; 2024 Aluminum Alloy
- Number of Teeth: 40
- Gear Type: Differential End; Rack
- Design: English
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Material: Aluminum; 2024 Aluminum Alloy
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Material: Aluminum; Acetal; Acetal Rim / Aluminum Core
- Number of Teeth: 128
- Gear Type: Spur; Rack
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Screw gears (crossed helical gears) are helical gears that are used to transmit (linear to rotary or rotary to linear) motion between non-intersecting shafts, typically at 90 °. Friction at the tooth point of contact, coupled with gear slippage, can cause screw gears to wear quickly and jam... [See More]
- Material: Aluminum; Bronze; Aluminum Bronze
- Number of Teeth: 13
- Gear Type: Rack
- Direction: Left
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Material: Aluminum; Bronze; Commercial / Aluminum Bronze
- Number of Teeth: 20
- Gear Type: Rack
- Direction: Right
from Stock Drive Products & Sterling Instrument - SDP/SI
In a standard differential, two output shafts distribute a load imparted on them from an input shaft at different speeds. A differential contains a pinion (bevel) gear [A] on the input shaft, where the load is transmitted. The pinion mates with a [B] carrier or ring (bevel) gear at 90 °. [See More]
- Material: Aluminum; 2024 Aluminum Alloy
- Number of Teeth: 72
- Gear Type: Differential End; Rack
- Pressure Angle: 20°
from W.M. Berg
Bevel Gears are used exclusively to transmit rotary motion between intersecting shafts. Through commonly seen in right angle drives, bevel gears can be cut to drive any angle. A cross section of the gear tooth reveals a profile similar to a spur gear. However, as the tooth is generated. the cross... [See More]
- Material: Aluminum; Stainless
- Pressure Angle: 20°
- Gear Type: Miter/Bevel
- PD: 0.62
from York Industries, Inc.
York manufactures custom spur gears, helical gears, worms, worm gears, gear racks and sprockets to your specifications in prototype through production quantities. Our pitch capacity ranges from 6 DP to 120 DP, including metric (module) pitches. We work with a variety of materials, including, steel,... [See More]
- Material: Aluminum; Brass; Bronze; Steel; Machined Plastic
- Gear Type: Spur; Helical; Worm; Rack
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Material: Aluminum
- Number of Teeth: 109
- Gear Type: Spur
- Design: English
from Shenzhen Besta Precision Machinery Co., Ltd.
Worm gear is one of gear type which mating with a worm to greatly reduce rotational speed, or allowing higher torque to be transmitted. this type of gear can gain higher gear ratio than spur gears of the same size. worm gear can be made from different material according to end application, some... [See More]
- Material: Aluminum; Brass; Cast Iron; Stainless; Delrin
- Design: Metric
- Gear Type: Worm
- Module: 0.5 - 6
from Circle Gear & Machine Co., Inc.
With extensive experience in the gear manufacturing industry, Circle Gear & Machine Co. is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic,... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Miter/Bevel
- Tooth Form: Straight; Spiral
from Ondrives.US Corporation, formerly Rino Mechanical
Helical cut gears are similar to spur gears with their teeth cut at an angle. The most popular helical gear design is 45 degrees. Helical cut gears can have a right hand or a left hand gear helix. When 45 ° helical gears of the opposite hand operate together they will turn parallel shafts in... [See More]
- Material: Aluminum; Stainless
- Number of Teeth: 10 to 160
- Gear Type: Helical
- Design: English
from W.M. Berg
Spur Gears are the most recognized style of gear. Spur Gears are used exclusively to transmit rotary motion between parallel shafts, while maintaining uniform speed and torque. The involute tooth form, being the simplest to generate, permits high manufacturing tolerances to be attained. Pitch: 12 to... [See More]
- Material: Aluminum
- Pressure Angle: 20°
- Gear Type: Spur
- PD: 0.75
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Material: Aluminum
- Number of Teeth: 86
- Gear Type: Spur
- Design: English
from Shenzhen Besta Precision Machinery Co., Ltd.
Besta offers extensive manufacturing capabilities for helical gears in diverse sizes, types, base materials, and shaft types. We can produce large-scale helical gears, measuring up to 1200mm in diameter. Diametrical pitch can run to 1.25, with up to a 20 module. The minimum diametrical pitch of... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Spur; Helical
- Module: 0.5 - 25
from Circle Gear & Machine Co., Inc.
Circle Gear & Machine Company Co. offers extensive manufacturing capabilities for helical gears in diverse sizes, types, base materials, and shaft types. We can produce large-scale helical gears, measuring up to 120" in diameter. Diametrical pitch can run to 1.25, with up to a 20 module. The... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Helical
- OD: 120
from Ondrives.US Corporation, formerly Rino Mechanical
A gear is a rotating machine part that utilizes cut teeth, or cogs, to mesh with another toothed part —usually another gear or a linear toothed part (called a gear rack) —to transmit rotational motion and torque. By using a combination of precision gears with the correct ratio, the... [See More]
- Material: Aluminum; Stainless
- Design: English
- Gear Type: Spur; Rack
- Features: Anti-backlash
from W.M. Berg
A rack is a toothed bar or rod that can be thought of as a sector gear with an infinitely large radius of curvature. Pitch: 16 to 96 DP & 1.5 to .25 MOD. Material: Aluminum and Stainless Steel. Available in Round or Rectangular Design [See More]
- Material: Aluminum
- Pressure Angle: 20°
- Gear Type: Rack
- Length: 10.00
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Miter / Bevel Gear Set; Hypoid
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
from Circle Gear & Machine Co., Inc.
With an extensive capacity to manufacture herringbone (or double helical) gears in quantities from large to small, Circle Gear & Machine Co. is well-prepared to meet your production needs, whatever the application may be. Working in ratios up to 1.5 diametrical pitch and modules up to 20, we can... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Herringbone
- OD: 60
from W.M. Berg
Internal Gears have the teeth generated on the I.D. of the blank. They are generally stronger and more efficient than the mating pinion gear. The pitch diameter of the internal gear must be at least 1.5 times the P.D. of the mating pinion. If this condition is not met, interferences between the tips... [See More]
- Material: Aluminum
- PD: 0.83
- Pressure Angle: 20°
from Shenzhen Besta Precision Machinery Co., Ltd.
Besta full line of gear manufacturing services includes internal gears, in addition to our selection of conventional, external gears. Internal gears, with teeth located on the inside as opposed to the outside of the gear, are used in all industries, such as electronics and chemical applications. We... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Number of Teeth: 50 to 200
- Gear Type: Internal
- Design: Metric
from Circle Gear & Machine Co., Inc.
Circle Gear & Machine Co.'s full line of gear manufacturing services includes internal gears, in addition to our selection of conventional, external gears. Internal gears, with teeth located on the inside as opposed to the outside of the gear, are used in all industries, from military/government... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Internal
- OD: 42
from W.M. Berg
Gearboxes are mechanisms that use gears to provide speed and torque conversions from a rotating power source to another device. Types: Worm, Bevel, Miter, Servo and Speed Reducers. Shaft Size: 1/8 ”, 3/16 ” or 1/4". Output Torque: 48 in. oz. – 500 in. oz. [See More]
- Material: Aluminum
- Gear Type: Worm; Worm Wheel
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Miter / Bevel Gear Set
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
from Circle Gear & Machine Co., Inc.
As a full service provider of gear manufacturing services, Circle Gear & Machine Co. features full machining capabilities for all types of spur gears. Through nearly any process required for the end application, our spur gears are fabricated based on your needs. Our spur gears are manufactured... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Spur
- OD: 120
from Shenzhen Besta Precision Machinery Co., Ltd.
Serving clients in a diverse range of industries, Besta is pleased to manufacture both internal and external splines, in involute and straight sided configurations. For internal spline products, we feature a maximum part diameter of 600mm, with a diametrical pitch of up to 2.5 and a module up to 10. [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Other; Spline Gear
- Module: 0.5 - 8
from Circle Gear & Machine Co., Inc.
With full production capabilities for gears of all types, Circle Gear & Machine Co. proudly offers worm and worm gear sets manufactured to customers from all industries. Worm gears can be manufactured up to 120" in diameter, with worms available in diameters up to 10". For the gear, we can... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Worm; Worm Wheel
- OD: 120
from Shenzhen Besta Precision Machinery Co., Ltd.
As a full service provider of gear manufacturing services, Besta features full machining capabilities for all types of spur gears. Through nearly any process required for the end application, our spur gears are fabricated based on your needs. Our spur gears are manufactured in small or large sizes,... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Spur
- Module: 0.5 - 24