Carbon / Alloy Steel Gears
from Chengdu Leno Machinery Co., Ltd.
Spur gear is a kind of structure of transmission gear, which has excellent performance in acceleration, braking and control. Spur gears are widely accepted as the most efficient gear transmission solution when power needs to be transferred to another mechanical device. Benefits. Spur gear is easy to... [See More]
- Material: Brass; Bronze; Steel; Stainless; Nylon
- Number of Teeth: 18
- Gear Type: Spur
- Pressure Angle: 20°
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 16 to 64
- Pressure Angle: 20°
from RS Components, Ltd.
Worm gear 0.8 module 2 starts [See More]
- Material: Bronze; Steel; Bronze, Steel
- Design: Metric
- Gear Type: Worm
- Direction: Right
from KHK USA, Inc.
Cut continuously. Long length and bendable to a contour. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SS400 Carbon Steel
- Design: Metric
- Gear Type: Other; CP Racks & Pinion
- Pressure Angle: 20°; 20 º
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Material: Steel; Low Carbon Steel
- Number of Teeth: 10
- Gear Type: Spur; Rack; Pinion
- Design: Metric
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 16 to 60
- Pressure Angle: 20°
from RS Components, Ltd.
Worm gear 1.0 module 2 starts [See More]
- Material: Bronze; Steel; Bronze, Steel
- Design: Metric
- Gear Type: Worm
- Direction: Right
from KHK USA, Inc.
Increased strength with SCM440 material which is thermal refined. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Number of Teeth: 100
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
The material of pinion wire is dragged through the dies; it is referred to as "drawn" steel, a process that begins with melting several metals together, typically iron plus an additional metal type that is a crucial part of the alloy (smelting). After being slightly cooled, the metal is then coated... [See More]
- Material: Steel; Carbon Steel
- Number of Teeth: 10
- Gear Type: Stock; Rack
- Design: English
from KHK USA, Inc.
This is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Number of Teeth: 100
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Material: Steel; Carbon Steel
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
High strength and abrasion-resistant for precision linear motion. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Design: Metric
- Gear Type: Other; CP Racks & Pinion
- Pressure Angle: 20°; 20 º
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Material: Steel; Carbon Steel Set
- Number of Teeth: 12
- Gear Type: Rack
- Design: English
from KHK USA, Inc.
Heat treated ground gears with high precision and strength has excellent cost-performance ratio. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Number of Teeth: 100
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Material: Steel; Carbon Steel
- Number of Teeth: 12
- Gear Type: Spur; Rack
- Design: English
from KHK USA, Inc.
Excellent products with high precision and strength, and low noise and abrasion characteristics. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Design: Metric
- Gear Type: Rack; Other; Racks
from Stock Drive Products & Sterling Instrument - SDP/SI
A worm gear pair, or worm gear set, consists of two gears: the worm, which resembles a spiral screw, and the worm gear (aka, worm wheel). For the pair to mesh, the worm and worm gear must have the same pressure angles, modules, and lead directions (left- or right-hand). A worm revolves on a shaft... [See More]
- Material: Steel; Carbon Steel/Commercial
- Direction: Right
- Gear Type: Worm; Rack
- Pressure Angle: 14.5°
from KHK USA, Inc.
Thermal refined and tooth-hardened chromolyracks, excellent in abrasion resistance. Use as mating pinions for KRCPF(-H) Racks. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is... [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Steel; Thermal Refined Alloy Steel
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 30
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued. Please contact KHK for alternative... [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Steel; Hardened; Hardened Alloy Steel
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 30
from KHK USA, Inc.
Superior performance with regard to highspeed, low noise, and low vibration. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Steel; Carbon Steel
- Pressure Angle: 20°
- Gear Type: Rack
- Shaft Diameter: 30
from KHK USA, Inc.
By pairing with STRCPF rack, the backlash may be adjusted. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Material: Steel; Hardened; Hardened Carbon Steel
- Number of Teeth: 20
- Gear Type: Spur; Rack
- Design: Metric
from KHK USA, Inc.
Grounded finished worms with a shaft, including tooth surface quenching treatment. Allows compact design due to having small reference diameters. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Design: Metric
- Gear Type: Other; Worm Gears
- Pressure Angle: 20°; 20 º
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Steel; SCM440 Alloy Steel, Black Oxide Coating
- Pressure Angle: 20°
- Gear Type: Rack
- Face Width: 30
from KHK USA, Inc.
High-precision duplex worms with superior strength. A range of backlash values can be obtained by moving the worm axially. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM440 (AISI 4140) Alloy Steel
- Design: Metric
- Gear Type: Other; Worm Gears
- Pressure Angle: 17.5 º
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Material: Steel; Carbon Steel
- Number of Teeth: 100
- Gear Type: Spur; Rack
- Design: Metric
from KHK USA, Inc.
Mass-produced, l ow cost si ntered products. Small and light weight. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SMF5040 Sintered Carbon Steel
- Number of Teeth: 20
- Gear Type: Other; Miter Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Internal gears are spur gears with teeth on the inside of the gear as opposed to on the outside. They rotate in the same direction as the driving gear (a spur gear of the same module), turning it. They frequently serve as a component of a planetary gear configuration, in which a driving gear... [See More]
- Material: Steel; Carbon Steel
- Number of Teeth: 100
- Gear Type: Internal; Rack
- Pressure Angle: 20°
from KHK USA, Inc.
The LS Sintered Spur Gears are made from pressed metal. These gears have a lower cost due to elimination of machining and reduction in wasted material. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Material: Steel; SMF5040 Sintered Carbon Steel
- Number of Teeth: 12
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
A gear rack is used to create linear motion out of rotary motion. Gear racks have square or round shafts with straight, equally spaced teeth; a pinion gear ’s teeth mesh with the teeth of the rack. We combined as a unit they are referred to as a “rack and pinion ”. Gear racks are... [See More]
- Material: Steel; Hardened; Commercial / Hardened Alloy Steel
- Direction: Left
- Gear Type: Rack
- Pressure Angle: 20°
from KHK USA, Inc.
Ready to use without performing secondary operations. Strong and abrasion resistant. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued. Please contact KHK for... [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 45
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Material: Steel; Pinion / Alloy Steel
- Number of Teeth: 1
- Gear Type: Hypoid; Rack
- Direction: Left
from KHK USA, Inc.
High strength, abrasion-resistant and compact for high-speed & torque use. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Screw gears (crossed helical gears) are helical gears that are used to transmit (linear to rotary or rotary to linear) motion between non-intersecting shafts, typically at 90 °. Friction at the tooth point of contact, coupled with gear slippage, can cause screw gears to wear quickly and jam... [See More]
- Material: Steel; Carbon Steel
- Number of Teeth: 13
- Gear Type: Rack
- Direction: Left
from KHK USA, Inc.
High speed reduction ratio, high efficiency, high rigidity and compact gear assembly. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 45
- Gear Type: Other; Bevel Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Material: Steel; Pinion (Carbon Steel)
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from KHK USA, Inc.
Compared to SM miters, these are stronger and less abrasive, and allow secondary operations. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; Miter Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Material: Steel; Carbon Steel
- Number of Teeth: 20
- Gear Type: Rack
- Face Width: 5
from KHK USA, Inc.
Compared to SM miters, these are stronger and less abrasive, and allow secondary operations. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; Miter Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Bevel gears are conically shaped gears produced as straight, spiral, and zerol bevel gears. The gears are commonly mounted on shafts that are perpendicular to each other. They are used to transfer mechanical energy between intersecting shafts. The shaft angle can be any angle, but bevel gears are... [See More]
- Material: Steel; Commercial / Carbon Steel
- Number of Teeth: 20
- Gear Type: Rack
- Direction: Left
from KHK USA, Inc.
Suitable for food machinery due to SUS303 material's rust-resistant quality. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; Miter Gears
- Design: Metric
from Stock Drive Products & Sterling Instrument - SDP/SI
Standard straight-tooth miter gears are a type of bevel gear set that has a 1:1 ratio, identical dimensions, and the same number of teeth, allowing them to mate with one another and transmit rotational motion at a 90 ° angle. Although the number of teeth in a spiral miter gear set is the same,... [See More]
- Material: Steel; Commercial / Carbon Steel
- Number of Teeth: 20
- Gear Type: Rack
- Direction: Left
from KHK USA, Inc.
Ready to use without performing secondary operations. Strong and abrasion resistant. [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; Miter Gears
- Design: Metric
from KHK USA, Inc.
Has the highest strength and precision in the KHK standard rack series. Bolt holes can be remachined as carburizing is applied only within the tooth area. J Series products are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are... [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 50
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from KHK USA, Inc.
Designed with positive partial transposition and to have an integral value (mm) for the mounting distance, so both strength and usability are enhanced. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 20
- Gear Type: Other; CP Racks & Pinion
- Design: Metric
from KHK USA, Inc.
The MSGA & MSGB Ground Spur Gears are made from a chrome-alloy steel and are carburized and ground finished. This results in a high-strength, abrasion-resistant and compact designed Spur Gear. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are... [See More]
- Material: Steel; SCM415 (AISI 4115) Alloy Steel
- Number of Teeth: 100
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from KHK USA, Inc.
Nylon teeth with steel hubs that can have keyways and set screws added. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Material: Steel; MC602ST Reinforced Nylon with S45C Carbon Steel core
- Number of Teeth: 100
- Gear Type: Spur; Other; Spur Gears
- Design: Metric
from Davall Gears, an ITW Company
Davall Gears is a long established UK manufacturer and supplier for the design and production of gearing systems and specialist gearboxes. Exporting a wide range of components worldwide, with it's customer base including; Aerospace, Defence, Medical, Industrial and Automotive sectors, for prototype,... [See More]
- Material: Steel
- Gear Type: Rack
from ATLANTA Drive Systems, Inc.
Atlanta standard bevel gears are made of heat-treatable steel Cf 53, material no. 1.1213, having a strength of 650- 800 N/mm ². For heavy-duty application our bevel gears may be subsequently fame or induction hardened. The following calculations therefore always refer to hardened as well as... [See More]
- Material: Steel
- Number of Teeth: 16
- Gear Type: Miter / Bevel Gear Set
- Design: Metric
from Martin Sprocket & Gear, Inc.
Bevel gear, 20 degree pressure angle, ratios range 1:1 to 6:52 [See More]
- Material: Steel
- Number of Teeth: 20
- Gear Type: Miter/Bevel
- Design: English
from Circle Gear & Machine Co., Inc.
With extensive experience in the gear manufacturing industry, Circle Gear & Machine Co. is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic,... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Miter/Bevel
- Tooth Form: Straight; Spiral
from QTC METRIC GEARS
Module 1.5, 20 Tooth, 45? Shaft Angle Mild Steel Angular Miter Gear [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 20
- PD: 30
from Reid Supply
Reid Supply offers miter and spur gears which are amongst the most economical gears in the power transmission industry. Spur gears are used to transmit power between parallel shafts while miter gears are used to transmit power between perpendicular shafts. . N/A [See More]
- Material: Steel
- Number of Teeth: 12
- Gear Type: Spur
- Design: English
from York Industries, Inc.
York manufactures custom spur gears, helical gears, worms, worm gears, gear racks and sprockets to your specifications in prototype through production quantities. Our pitch capacity ranges from 6 DP to 120 DP, including metric (module) pitches. We work with a variety of materials, including, steel,... [See More]
- Material: Aluminum; Brass; Bronze; Steel; Machined Plastic
- Gear Type: Spur; Helical; Worm; Rack
from W.M. Berg
Spur Gears are the most recognized style of gear. Spur Gears are used exclusively to transmit rotary motion between parallel shafts, while maintaining uniform speed and torque. The involute tooth form, being the simplest to generate, permits high manufacturing tolerances to be attained. Pitch: 12 to... [See More]
- Material: Steel
- Pressure Angle: 20°
- Gear Type: Spur
- PD: 0.42
from Shenzhen Besta Precision Machinery Co., Ltd.
Rack and pinion is utilized to convert rotational motion to linear motion. A rack is straight teeth cut into one surface of rectangular or cylindrical rod shaped material, and a pinion is a small cylindrical gear meshing with the rack. There are many ways to categorize gears. If the relative... [See More]
- Material: Steel
- Number of Teeth: 30 to 300
- Gear Type: Rack; Pinion
- Design: Metric
from Davall Gears, an ITW Company
Davall Gears is a long established UK manufacturer and supplier for the design and production of gearing systems and specialist gearboxes. Exporting a wide range of components worldwide, with it's customer base including; Aerospace, Defence, Medical, Industrial and Automotive sectors, for prototype,... [See More]
- Material: Steel
- Gear Type: Rack
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Material: Steel
- Number of Teeth: 25
- Gear Type: Spur; Pinion
- Design: Metric
from Martin Sprocket & Gear, Inc.
Machined gear rack, standard face width, 14 pressure angle [See More]
- Material: Steel
- Design: English
- Gear Type: Rack
- Pressure Angle: 14.5°
from Circle Gear & Machine Co., Inc.
Circle Gear & Machine Company Co. offers extensive manufacturing capabilities for helical gears in diverse sizes, types, base materials, and shaft types. We can produce large-scale helical gears, measuring up to 120" in diameter. Diametrical pitch can run to 1.25, with up to a 20 module. The... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Helical
- OD: 120
from QTC METRIC GEARS
Module 0.5, 100 Tooth Mild Steel Internal Gear [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 100
- Pressure Angle: 20°
from Reid Supply
Reid Supply offers miter and spur gears which are amongst the most economical gears in the power transmission industry. Spur gears are used to transmit power between parallel shafts while miter gears are used to transmit power between perpendicular shafts. . N/A [See More]
- Material: Steel
- Number of Teeth: 15
- Gear Type: Miter/Bevel
- Design: English
from Shenzhen Besta Precision Machinery Co., Ltd.
Besta offers extensive manufacturing capabilities for helical gears in diverse sizes, types, base materials, and shaft types. We can produce large-scale helical gears, measuring up to 1200mm in diameter. Diametrical pitch can run to 1.25, with up to a 20 module. The minimum diametrical pitch of... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Spur; Helical
- Module: 0.5 - 25
from ATLANTA Drive Systems, Inc.
Our shafts, sleeves and hubs are low-priced joining elements designed for application in the mechanical engineering sector, the automotive industry (power take-off shafts) etc. Apart from profles milled from solid stock featuring solid shaft ends, we also supply from stock full-length drawn or... [See More]
- Material: Steel
- Number of Teeth: 10
- Gear Type: Stock
- Design: Metric
from Martin Sprocket & Gear, Inc.
Martin manufactures spur gears and gear rack, bevel gears, miter gears and worm gears. With a vast inventory of raw materials, modern machine tool capacity, and a pro-service attitude, Martin makes short work of a quick delivery on all specialty gears. [See More]
- Material: Steel
- Number of Teeth: 11
- Gear Type: Spur; Pinion (optional feature)
- Design: English
from Circle Gear & Machine Co., Inc.
With an extensive capacity to manufacture herringbone (or double helical) gears in quantities from large to small, Circle Gear & Machine Co. is well-prepared to meet your production needs, whatever the application may be. Working in ratios up to 1.5 diametrical pitch and modules up to 20, we can... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Herringbone
- OD: 60
from QTC METRIC GEARS
Module 1.5, 1 Start Right Handed Ground Steel Worm Shaft [See More]
- Material: Steel
- Pressure Angle: 20°
- Design: Metric
- OD: 28
from Reid Supply
Reid Supply offers miter and spur gears which are amongst the most economical gears in the power transmission industry. Spur gears are used to transmit power between parallel shafts while miter gears are used to transmit power between perpendicular shafts. . N/A [See More]
- Material: Steel
- Number of Teeth: 32
- Gear Type: Spur
- Design: English
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Miter / Bevel Gear Set; Hypoid
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
from Martin Sprocket & Gear, Inc.
Miter gears, 20 degree pressure angle, 1:1 ratio [See More]
- Material: Steel
- Number of Teeth: 24
- Gear Type: Miter/Bevel
- Design: English
from Circle Gear & Machine Co., Inc.
Circle Gear & Machine Co.'s full line of gear manufacturing services includes internal gears, in addition to our selection of conventional, external gears. Internal gears, with teeth located on the inside as opposed to the outside of the gear, are used in all industries, from military/government... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Internal
- OD: 42
from QTC METRIC GEARS
Nissei Module 1.5, 20 Tooth Alloy Steel Left Hand Threaded Spiral Miter Gear with Finished Bore [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 20
- Pressure Angle: 20°
from Reid Supply
Reid Supply offers miter and spur gears which are amongst the most economical gears in the power transmission industry. Spur gears are used to transmit power between parallel shafts while miter gears are used to transmit power between perpendicular shafts. . N/A [See More]
- Material: Steel
- Number of Teeth: 12
- Gear Type: Spur
- Design: English
from Shenzhen Besta Precision Machinery Co., Ltd.
Besta full line of gear manufacturing services includes internal gears, in addition to our selection of conventional, external gears. Internal gears, with teeth located on the inside as opposed to the outside of the gear, are used in all industries, such as electronics and chemical applications. We... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Number of Teeth: 50 to 200
- Gear Type: Internal
- Design: Metric
from Martin Sprocket & Gear, Inc.
Steel spur gears 3DP, 14.5 pressure angle, without hubs [See More]
- Material: Steel
- Number of Teeth: 11
- Gear Type: Spur; Pinion (optional feature)
- Design: English
from Circle Gear & Machine Co., Inc.
As a full service provider of gear manufacturing services, Circle Gear & Machine Co. features full machining capabilities for all types of spur gears. Through nearly any process required for the end application, our spur gears are fabricated based on your needs. Our spur gears are manufactured... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Spur
- OD: 120
from QTC METRIC GEARS
Module 1 - 100mm Ground Alloy Steel Left Handed Helical Rack [See More]
- Material: Steel
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from Shenzhen Besta Precision Machinery Co., Ltd.
With extensive experience in the gear manufacturing industry, Besta is pleased to introduce our line of bevel and spiral bevel gears, working with materials including aluminum, ductile iron, and stainless steel. In addition, we can work with non-metals like nylon, plastic, and phenolic, Our size... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Miter / Bevel Gear Set
- Pressure Angle: 20°; 15°, 21.5° & 22.5°
from Martin Sprocket & Gear, Inc.
Worm and worm gears, right handed, 14 1/2 degree pressure angle [See More]
- Material: Steel
- Design: English
- Gear Type: Worm
- Direction: Right
from Circle Gear & Machine Co., Inc.
With full production capabilities for gears of all types, Circle Gear & Machine Co. proudly offers worm and worm gear sets manufactured to customers from all industries. Worm gears can be manufactured up to 120" in diameter, with worms available in diameters up to 10". For the gear, we can... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate; Ductile Iron; Polyester
- Design: English
- Gear Type: Worm; Worm Wheel
- OD: 120
from QTC METRIC GEARS
Module 1, 45 Tooth Right Handed Alloy Steel Hypoid Gear [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 45
- Bore Diameter: 12
from Shenzhen Besta Precision Machinery Co., Ltd.
Serving clients in a diverse range of industries, Besta is pleased to manufacture both internal and external splines, in involute and straight sided configurations. For internal spline products, we feature a maximum part diameter of 600mm, with a diametrical pitch of up to 2.5 and a module up to 10. [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Other; Spline Gear
- Module: 0.5 - 8
from QTC METRIC GEARS
Module 1, 13 Tooth Mild Steel Left Handed Screw Gear with Plain Bore [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 13
- PD: 18.4
from Shenzhen Besta Precision Machinery Co., Ltd.
As a full service provider of gear manufacturing services, Besta features full machining capabilities for all types of spur gears. Through nearly any process required for the end application, our spur gears are fabricated based on your needs. Our spur gears are manufactured in small or large sizes,... [See More]
- Material: Aluminum; Brass; Bronze; Cast Iron; Steel; Stainless; Acetal; Delrin; Nylon; Polycarbonate
- Design: Metric
- Gear Type: Spur
- Module: 0.5 - 24
from QTC METRIC GEARS
Module 1, 100 Tooth Ground Steel Spur Gear [See More]
- Material: Steel
- Number of Teeth: 100
- Gear Type: Spur
- Design: Metric
from QTC METRIC GEARS
Module 1 - 100mm Hardened Ground Alloy Steel Rack [See More]
- Material: Steel
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from QTC METRIC GEARS
Circular Pitch 10 - 1000mm Alloy Steel Rack with Finished Ends [See More]
- Material: Steel
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from QTC METRIC GEARS
Circular Pitch 10 - 1000mm Ground Hardened Alloy Steel Rack with Mounting Holes [See More]
- Material: Steel
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from QTC METRIC GEARS
Module 1, 500mm Mild Steel Round Rack [See More]
- Material: Steel
- Design: Metric
- Gear Type: Rack
- Pressure Angle: 20°
from QTC METRIC GEARS
Circular Pitch 10 - 10 Tooth Ground Steel Pinion Shaft [See More]
- Material: Steel
- Number of Teeth: 10
- Gear Type: Pinion
- Design: Metric
from QTC METRIC GEARS
Module 2, 20 Tooth Ground Steel Left Handed Zerol Spiral Bevel Gear [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 20
- PD: 40
from QTC METRIC GEARS
Module 2, 20 Tooth Ground Steel Left Handed Zerol Spiral Miter Gear [See More]
- Material: Steel
- Design: Metric
- Number of Teeth: 20
- PD: 50