CPVC Plastic Valves
from Bonomi North America, Inc.
0.5" 2-Way, CPVC Ball Valve & 12VDC Plastic On/Off Electric Actuator [See More]
- Primary Material: CPVC
- Maximum Pressure: 600.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts and connections are choice of PVC or CPVC. Seats are PTFE; o-rings are choice of EPDM or FKM (Viton).Actuator body is aluminum alloy (ASTM 6063-T6 and ASTM B179) with additional components constructed of nickel plated steel, stainless steel, spring... [See More]
- Primary Material: PVC; CPVC
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Valve Type: Ball
from Blacoh Fluid Control, Inc.
1/4" CPVC BACK PRESSURE VALVE, PTFE, NPT, MINI [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.25
- Number of Ports: 2
from Bonomi North America, Inc.
0.5" 2-Way, CPVC Ball Valve & Double Acting Pneumatic Actuator [See More]
- Primary Material: CPVC
- Maximum Pressure: 600.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
High performance brushless actuator motor with overload/overheat protection.Valve body and piping connections are available in PVC or CPVC, with EPDM or Viton seals. Actuator housing is constructed of ABS and is IP67 rated. ISO drive and mounting unit are aluminum.Mounting fasteners are stainless... [See More]
- Primary Material: PVC; CPVC
- Number of Ports: 2
- Valve Size: 0.75 to 4.00
- Valve Type: Ball
from Blacoh Fluid Control, Inc.
1/2" CPVC BACK PRESSURE VALVE, PTFE, 150# FLANGE, MINI [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts and connections are choice of PVC, CPVC, beige polypro, or PVDF. Seats are PTFE; O-rings are choice of EPDM or FKM. Handle is molded of ABS. Maximum test pressure under laboratory conditions at 75°F is 235 PSI on 1/2" through 2" sizes, 150 PSI on 3"... [See More]
- Primary Material: PVC; CPVC; PVDF
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Valve Type: Ball
from Blacoh Fluid Control, Inc.
1/2" CPVC BACK PRESSURE VALVE, PTFE, UNION, MINI [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 2
from Plast-O-Matic Valves, Inc.
Valve body, stem, ball, seat carrier, union nuts & connections are choice of PVC, CPVC, polypro, or PVDF. Seats are PTFE; o-rings are choice of EPDM or FKM. Handle is molded of ABS. Mounting threads (non-wetted) are brass and 304 stainless steel. Maximum test pressure under laboratory conditions at... [See More]
- Primary Material: PVC; CPVC; PVDF
- Number of Ports: 2
- Valve Size: 0.50 to 4.00
- Valve Type: Ball
from Blacoh Fluid Control, Inc.
1/2" CPVC BACK PRESSURE VALVE, PTFE, NPT [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 2
from Blacoh Fluid Control, Inc.
1/2" CPVC BACK PRESSURE VALVE, PTFE, UNION [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 2
from Blacoh Fluid Control, Inc.
1/2" CPVC BACK PRESSURE VALVE RIGHT ANGLE 90, PTFE, UNION, MINI [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 2
from Blacoh Fluid Control, Inc.
1/2" CPVC, AUTOMATIC DEGASSING VALVE, NPT [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Connection Description: Threaded; FNPT
from Blacoh Fluid Control, Inc.
1/2" CPVC, AUTOMATIC DEGASSING VALVE, UNION [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Connection Description: UNION
from Blacoh Fluid Control, Inc.
1/2" CPVC PRESSURE RELIEF VALVE, EPDM, UNION, MINI [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 3
from Blacoh Fluid Control, Inc.
1/2" CPVC PRESSURE RELIEF VALVE, EPDM, 150# FLANGE [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 3
from Blacoh Fluid Control, Inc.
1/2" CPVC PRESSURE RELIEF VALVE, EPDM, UNION [See More]
- Primary Material: CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.50
- Number of Ports: 3
from Cole-Parmer
• True union ball valve with added safety and functionality for a diverse range of applications. • PTFE ball seat with high abrasion resistance. • Built-in tool for easy adjustment of ball torque. • Threaded mounting inserts for fixed-point attachment [See More]
- Primary Material: CPVC
- Flow (Cv): 5.00
- Maximum Pressure: 232.00
- Valve Type: Ball
from U.S. Plastic Corporation
1/2" CPVC CTS Ball Valve has a thermoplastic design that eliminates process and atmospheric corrosion. Valves are molded from ASTM D1784, Cell Classification 23447 virgin CPVC resin. They are suitable for hot and cold water systems. They conform to ASTM D2846 for dimensions of sockets and wall... [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.50
from GF Piping Systems
A broad spectrum of product features provides you with quality, flexibility, and reliability, in addition to modularity. GF Piping Systems has 40 years experience in plastic valves. GF Piping Systems offers 3-way diverter valves, metering valves as well as basic plastic ball valves to meet all your... [See More]
- Primary Material: PVC; CPVC; PVDF; ABS
- Maximum Pressure: 232.00
- Valve Size: 0.38 to 6.00
- Number of Ports: 2 to 3
from Clark Solutions
All model 83 open/close electrically actuated ball valves sizes 3/8" thru 2" have direct mounted unidirectional 90 º turn actuators (115 Vac & 220 Vac, 12/24 AC & DC are reversing). The actuators are weatherproof (NEMA 4X), have a green lead for grounding, and all wire leads protrude... [See More]
- Primary Material: PVC; CPVC
- Maximum Pressure: 150.00
- Valve Size: 0.38 to 2.00
- Number of Ports: 2
from Hayward Flow Control
HCTB Series ready for actuation ball valves are the TB Series without a handle or a mounting kit. In other words, these valves are ready for actuation. If an actuator is ordered with the valve, the mounting kit is included at no charge. The mounting kit is determined by the choice or type of... [See More]
- Primary Material: PVC; CPVC
- Number of Ports: 2
- Valve Size: 0.50 to 6.00
- Valve Type: Ball
from NIBCO INC.
Corzan ® CPVC 80 valves for use with hot corrosive liquids, chemical processing, industrial plating, chilled water distribution, deionized water lines, chemical drainage and waste water treatment systems. Valve pressure rating 250 psi at 73 °F water non-shock full-port, Maximum service... [See More]
- Primary Material: CPVC
- Maximum Pressure: 250.00
- Valve Size: 0.50 to 6.00
- Number of Ports: 2
from Cole-Parmer
Ball Valves [See More]
- Primary Material: CPVC
- Valve Type: Ball
from U.S. Plastic Corporation
Valves are premium quality and ideally suited for the most demanding industrial, commercial, agricultural and turf irrigation environments. Patented PVDF polymeric locking strip allows safe operation even when installed in the reverse direction. It also allows for ease of disassembly, should the... [See More]
- Primary Material: CPVC
- Connection Description: Socket Weld
- Valve Size: 4.00
from GF Piping Systems
GF Piping Systems provide Butterfly Valves with a comprehensive range of products for water and lug style applications. Our systems' modular design principle allows you to exchange individual system components-fast, easily and at very little expense. Types: Type 563 Aqua Butterfly Valve from Georg... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Maximum Pressure: 150.00
- Valve Size: 2.00 to 24.00
- Valve Type: Butterfly
from Hayward Flow Control
SV Series solenoid valves are available in PVC or Corzan CPVC. Seals are FPM or EPDM. All sizes are offered with socket and threaded end connections. Standard voltage is 120 VAC. Specify optional voltage of 12 or 24 VAC/VDC or 220VAC. Features. PVC and Corzan CPVC. Continuous or 100% Duty... [See More]
- Primary Material: PVC; CPVC; Corzan
- Maximum Pressure: 120.00 to 150.00
- Valve Size: 0.25 to 1.00
- Number of Ports: 2
from Cole-Parmer
bull; Quarter-turn valves offer numerous standard features. • Four limit switches provide electrical control of actuator. • NEMA 4X electrical enclosure. • Position indicators show yellow for open and red for closed valve. • Clutchless manual override allows you to close valve... [See More]
- Primary Material: CPVC
- Flow (Cv): 1235.00
- Maximum Pressure: 225.00
- Valve Type: Ball
from U.S. Plastic Corporation
Industrial Series PVC & Corzan CPVC Schedule 80. CEPEX Industrial series antiblock full port true union ball valve with PTFE seats and EPDM or Viton O-Rings. 1/2" - 2" rated @ 240 PSI and supplied with Socket/Threaded Combo End Connectors. 2-1/2" - 4" rated @ 150 PSI and supplied with either... [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.50
- Connection Description: Union
from GF Piping Systems
GF Piping Systems plastic check valves provide minimum pressure loss and can be mounted horizontally or vertically. Our check valves offer good flow characteristics and compact design. Types: Types 561 and 562 ring in a new generation of valves, featuring more safety, simplicity,. Type 301 Y-Globe... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Valve Type: Check
- Valve Size: 0.38 to 12.00
- Connection Description: BoltFlange (optional feature); Tube Fitting; Butt Weld (optional feature); Socket Weld; Fusion
from Hayward Flow Control
PMDTB Series is a package unit of a PMD pneumatic actuator and a TB Series ball valve. The PMD actuator is double acting air-to-air operation with a solenoid valve packaged with a TB Series ball valve in PVC or Corzan CPVC. FPM or EPDM o-rings are available and the valve comes with socket and... [See More]
- Primary Material: PVC; CPVC; Corzan
- Number of Ports: 2
- Valve Size: 0.50 to 2.00
- Valve Type: Ball
from Cole-Parmer
CPVC valve, double Viton(R) seals, NEMA 4X polypropylene housing [See More]
- Primary Material: CPVC
- Flow (Cv): 8.00
- Maximum Pressure: 225.00
- Valve Type: Ball
from U.S. Plastic Corporation
Valves are premium quality and ideally suited for the most demanding industrial, commercial, agricultural and turf irrigation environments. Patented PVDF polymeric locking strip allows safe operation even when installed in the reverse direction. It also allows for ease of disassembly, should the... [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.50
- Connection Description: Threaded; Union; Socket Weld
from GF Piping Systems
Ball Valves: Available in PVC and CPVC, the type 104 ball valve from Georg Fischer offers an economic solution for less demanding applications. The type 104 is based on the same industrial ball valve Georg Fischer uses in other applications. This means the valve is true union and can be repaired if... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Maximum Pressure: 150.00 to 232.00
- Valve Size: 0.38 to 12.00
- Number of Ports: 2 to 3
from Hayward Flow Control
All Thermoplastic diaphragm Pressure Relief Valve for protecting against over-pressure in Chemical Feed Systems. All valves are preset at 50 psi, however they are field adjustable via the adjustment screw. [See More]
- Primary Material: PVC; CPVC; PP; PVDF, Noryl
- Maximum Pressure: 10.00 to 150.00
- Valve Size: 0.25 to 2.00
- Valve Type: Diaphragm
from Cole-Parmer
• Ideal for process systems requiring an instant on/off actuated valve. • Lower coil operating temperatue result in valves that are rated for 100% continuous duty. • Built-in 1/2" conduit connection. • Normally closed. • Includes both socket and NPT(F) conections [See More]
- Primary Material: CPVC
- Flow (Cv): 1.30
- Maximum Pressure: 150.00
- Valve Type: Solenoid
from U.S. Plastic Corporation
Full port with FPM Seals, PTFE Seats, 150 psi rated. Used for shut-off for downstream repair. Snap fit handle - never falls off. All plastic construction. Has many applications: Chemical processing, plating, photo processing, laboratories, water conditioning, electronic production, food, and brine. [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.50
- Connection Description: Threaded; Union; Socket Weld
from GF Piping Systems
The new Generation Diaphragm Valve of GF Piping System sets new standards regarding safety, efficiency and simplicity. Instead of the commonly used four metal screws, it has a central union nut. This non-corrosive connection is characterized by homogeneous temperature behavior, even surface pressure... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Maximum Pressure: 240.00
- Valve Size: 0.50 to 2.00
- Valve Type: Diaphragm
from Hayward Flow Control
All thermoplastic diaphragm Back Pressure Valve for chemical feed systems, applies back pressure to a metering pump to prevent siphoning and eliminates varying dosage rates resulting from fluctuating downstream pressure. All valves are preset for 50 psi, but are field adjustable via the adjustment... [See More]
- Primary Material: PVC; CPVC; PP; PVDF, Noryl
- Maximum Pressure: 10.00 to 150.00
- Valve Size: 0.25 to 2.00
- Valve Type: Diaphragm
from U.S. Plastic Corporation
Manual, 2-way, full port ball valve provides long working life and maintenance-free performance. True union permits radial installation or removal. Access to all components (ball, stem, seats and seals) is provided by removal of the left hand threaded seat carrier. The ergonomic handle has a... [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.38
- Connection Description: Threaded; Union; Socket Weld
from GF Piping Systems
Ball Valves: The Type 230 Series Pneumatically Actuated Ball Valve from Georg Fischer is the ultimate choice for the high demands of the industrial world. It is available in PVC, CPVC, PP-H, and PVDF material. The valve can be configured for throttling or for simple open/close functionality. The... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Maximum Pressure: 150.00 to 232.00
- Valve Size: 0.38 to 12.00
- Number of Ports: 2 to 3
from Hayward Flow Control
New Full Pattern Wafer Check Valves in PVC and CPVC, sizes 2" - 8' with FPM or EPDM Gasket and Disc Seals. Spring return option in 316 Stainless Steel or Hastelloy materials. No spacers or specialty flanges required. Features. Robust Full Pattern Body in PVC, CPVC and Coming Soon, GFPP. No Need for... [See More]
- Primary Material: PVC; CPVC
- Maximum Pressure: 150.00
- Valve Size: 2.00 to 8.00
- Number of Ports: 2
from U.S. Plastic Corporation
This diaphragm valve sets new standards regarding safety, efficiency and simplicity. Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterized by homogeneous temperature behavior, an even surface pressure and pressure rating up to 150... [See More]
- Primary Material: CPVC
- Valve Type: Diaphragm
- Valve Size: 0.50
from GF Piping Systems
The Pressure Retaining Valve V586 from GF Piping Systems serve to keep the working or system-related pressures constant, to balance out pressure pulsation and to reduce pressure peaks in chemical process systems. If the inlet pressure rises above the set value, the pressurized valve piston is lifted... [See More]
- Primary Material: PVC; CPVC; PP; PVDF
- Maximum Pressure: 150.00
- Valve Size: 0.38 to 2.00
- Connection Description: BoltFlange; Butt Weld; Socket Weld; Fusion
from Hayward Flow Control
The IV Series Injection Valves and IQ Series Injection Quills facilitate injection of chemicals away from pipe or tank inner walls, ensuring rapid mixing and preventing corrosion. Each design includes a built-in ball check valve with Hastelloy CTM spring to prevent back-flow of the process liquid... [See More]
- Primary Material: PVC; CPVC; PVDF; FPM or EPDM O-Ring Seals
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 1.00
- Number of Ports: 2
from U.S. Plastic Corporation
Hayward registered true union ball valves provide quick quarter turn shut-off and eliminate need for unions. Their design allows for easy valve body removal from a piping system without disturbing pipe connections. Simply unscrew the two assembly nuts and lift the valve body out of line. The valve's... [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.50
- Connection Description: Threaded; Union; Socket Weld
from Hayward Flow Control
LA Series lateral 3-way ball valves are available in PVC and Corzan CPVC. O-rings are FPM or EPDM and seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. All valves are assembled with silicone free lubricant. Features. PVC and Corzan CPVC. Simplifies Lateral Connections. [See More]
- Primary Material: PVC; CPVC; PP; Corzan
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 6.00
- Number of Ports: 3
from U.S. Plastic Corporation
Hayward true check ball check valves with viton seals, NSF listed material and 150 PSI at 70 degrees F., prevent reversal of flow in piping systems. They are ideal where backflow could potentially cause damage to pumps, filters, or process equipment. Line pressure unseats the solid plastic ball to... [See More]
- Primary Material: CPVC
- Valve Type: Check
- Valve Size: 0.50
- Connection Description: Threaded; Union; Socket Weld
from Hayward Flow Control
TW Series 3-Way ball valves are available in PVC and Corzan CPVC. O-rings are either FPM or EPDM and the seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. All TW Series valves are assembled with silicone free lubricant. Features. PVC and Corzan CPVC. Position Indicator. [See More]
- Primary Material: PVC; CPVC; PP; Corzan
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 6.00
- Number of Ports: 3
from U.S. Plastic Corporation
Diaphragm valves are engineered to provide superior handling of difficult media such as corrosive fluids, abrasives and slurries. They can also be used for high purity and sanitary applications. The valve controls flow by varying the space between a stationary weir and a moveable flexible diaphragm. [See More]
- Primary Material: CPVC
- Connection Description: Union
- Valve Type: Diaphragm
from Hayward Flow Control
CV Series Profile2 ™ ball valves are available in PVC and Corzan CPVC.O-rings are either FPM or EPDM and the seats are PTFE. Up to 2 in. sizes are packed standard with socket & threaded end connections. The proportional control provides two linear flow curves, one for fast opening,and one... [See More]
- Primary Material: PVC; CPVC; PP; Corzan
- Maximum Pressure: 250.00
- Valve Size: 1.00 to 6.00
- Number of Ports: 2
from U.S. Plastic Corporation
Diaphragm valves are engineered to provide superior handling of difficult media such as corrosive fluids, abrasives and slurries. They can also be used for high purity and sanitary applications. The valve controls flow by varying the space between a stationary weir and a moveable flexible diaphragm. [See More]
- Primary Material: CPVC
- Connection Description: BoltFlange
- Valve Type: Diaphragm
from Hayward Flow Control
TBB Series true union ball valves are offered in PVC, Corzan CPVC, PP and PVDF. O-rings are FPM or EPDM. Up to 2 in. sizes have socket and threaded end connections. All seats are PTFE. Features. PVC, CPVC, PP and PVDF. Full Port Design. Easy Maintenance. FPM or EPDM Seals. Easily Automated. Double... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; Corzan
- Maximum Pressure: 225.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from U.S. Plastic Corporation
Valve features an ultra-compact double block design, and full port bi-directional operation. The true union design allows the valve to be easily removed from the piping system and fully serviced. A threaded seat stop carrier provides improved seal integrity under tough service conditions while the... [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.50
- Connection Description: Union
from Hayward Flow Control
The BYV Series butterfly valves are available in PVC, CPVC and GFPP bodies and discs. Liners and seals available in VITON, EPDM or Nitrile materials. 316SS Stems are standard. The BYV Series features a revolutionary hand lever with 19 lockable stop positions and 360 degree interlocking splines. [See More]
- Primary Material: PVC; CPVC; GF-PP
- Maximum Pressure: 150.00
- Valve Size: 2.00 to 12.00
- Number of Ports: 2
from U.S. Plastic Corporation
NSF listed. Valve body rotates 360. All plastic non-corrosive construction. Shut-off for downstream or upstream repair. FKM O-ring seals, self-lubricating TFE seats. Double union design permits in-line maintenance without disconnecting pipe. Full port design, Cv can be disregarded since pressure... [See More]
- Primary Material: CPVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Type: Ball
from Hayward Flow Control
SW Series swing check valves are offered in PVC, Corzan CPVC and PP. Seals and seats are FPM or EPDM. A counterweight is an option for added stability. Swing check valves are furnished with two o-ring flange seals so no additional gaskets are required for installation. All valves are assembled with... [See More]
- Primary Material: PVC; CPVC; PP; Corzan
- Maximum Pressure: 150.00 to 225.00
- Valve Size: 3.00 to 8.00
- Number of Ports: 2
from U.S. Plastic Corporation
Not spring loaded but the design insures free movement of the ball. Ball supported by a system of guide ribs to give full flow with minimum turbulence and chatter. Union connections for easy access to valve components. Requires only inches of head pressure to seal and open. All plastic construction... [See More]
- Primary Material: CPVC
- Valve Type: Check
- Valve Size: 0.50
- Connection Description: Threaded; Union; Socket Weld
from Hayward Flow Control
TC Series true union ball check valves are offered in PVC, Corzan CPVC, and PP. O-rings and seats are FPM or EPDM. 1/4 in. and 3/8 in. sizes are PVConly and are trim check design. They have socket or threaded end connections. Others up to 2 in. sizes have socket and threaded end connections. All... [See More]
- Primary Material: PVC; CPVC; PP; Corzan
- Maximum Pressure: 150.00
- Valve Size: 0.25 to 6.00
- Number of Ports: 2
from U.S. Plastic Corporation
Diameter: 1.3". Length: 3.8". Working psi @ 77F: 150 inlet/100 back. Maximum Temperature: 180F. [See More]
- Primary Material: CPVC
- Valve Type: Diaphragm; Check
from Hayward Flow Control
YC Series y-check valves are offered in PVC and Corzan CPVC. O-rings are FPM standard but EPDM is available. All sizes are either socket, threaded or flanged body style. True union socket or threaded end connections are available. For spring-loaded y-check valves, see the SLC Series. All valves are... [See More]
- Primary Material: PVC; CPVC; PP; Corzan
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 3
from U.S. Plastic Corporation
1 1/2"cks cpvc diaphragm ck valve-epdm [See More]
- Primary Material: CPVC
- Valve Type: Diaphragm; Check
from Hayward Flow Control
Pressure Regulator valves are available in PVC and Corzan CPVC. Seals are FPM only. End connections are threaded only. Pressure Regulator valves can be set from 5 - 75 PSI. Minimum charges for setting pressures exist. All valves are assembled with silicone free lubricant. Features. PVC or Corzan... [See More]
- Primary Material: PVC; CPVC; Corzan
- Maximum Pressure: 150.00
- Valve Size: 0.25 to 1.50
- Number of Ports: 2
from U.S. Plastic Corporation
3"cks cpvc diaphragm check valve-epdm [See More]
- Primary Material: CPVC
- Valve Type: Diaphragm; Check
from Hayward Flow Control
Pressure Relief valves are offered in PVC and Corzan CPVC. Seals are FPM or EPDM. End connections are threaded only. Pressure Relief valves can be set from 5 - 75 PSI. Minimum charge for setting pressure exists. Low pressure spring option is available. All valves are assembled with silicone free... [See More]
- Primary Material: PVC; CPVC; Corzan
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 2.00
- Number of Ports: 2
from U.S. Plastic Corporation
Maximum Inlet Pressure: 140 psi, Maximum Back Pressure: 38 psi, Insulation class: H, Watts (maximum): 24 (watts drop to approximately 6 watts after initially energized), Duty Cycle: 100% (may be energized indefinitely, or rapid on/off cycling is acceptable), Maximum Ambient Temperature: 122F,... [See More]
- Primary Material: CPVC
- Valve Type: Solenoid
from Hayward Flow Control
TBZ Series (Z-Ball) true union ball valves have a drilled ball to vent gases for sodium hypochlorite service. They are offered in PVC or Corzan CPVC with FPM o-rings only. Seats are PTFE. Up to 2 in. sizes have socket and threaded end connections. All valves are assembled with silicone free... [See More]
- Primary Material: PVC; CPVC; PP; Corzan
- Maximum Pressure: 250.00
- Valve Size: 0.25 to 6.00
- Number of Ports: 2
from U.S. Plastic Corporation
Maximum Inlet Pressure: 140 psi, Maximum Back Pressure: 38 psi, Insulation class: H, Duty Cycle: 100% (may be energized indefinitely, or rapid on/off cycling is acceptable), Maximum Ambient Temperature: 122F, Voltage Tolerance: 10% above or below rated voltage, Inclosure Rating: ID65. [See More]
- Primary Material: CPVC
- Valve Type: Solenoid
from Hayward Flow Control
The TBH Series features a low maintenance design with its new patent pending System2 ™ Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern – on all... [See More]
- Primary Material: PVC; CPVC; BFPP
- Maximum Pressure: 250.00
- Valve Size: 0.25 to 2.00
- Number of Ports: 2
from U.S. Plastic Corporation
Cv value: 5.2, Insulation Class: F, Coil Surface Temperature: 180F, Maximum Allowable Ambient Temperature: 104F, VA Inrush: 66, VA Holding: 24. [See More]
- Primary Material: CPVC
- Valve Type: Solenoid
from Hayward Flow Control
The TBH-Z Series (Z-Ball) true union ball valves have a drilled ball to vent gases for sodium hypochlorite service. Available in PVC or CPVC materials with FPM o-rings only and PTFE seats. Sizes are 1/2" to 2" with IPS or DIN/EN socket, threaded and flanged end connections. All valves are assembled... [See More]
- Primary Material: PVC; CPVC; BFPP
- Maximum Pressure: 250.00
- Valve Size: 0.25 to 2.00
- Number of Ports: 2
from U.S. Plastic Corporation
Heavy-duty solenoid valves feature true union end connections and are designed so no pressure differential is required for reliable operation. Unique coil design results in lower coil operating temperatures and a 100% continuous duty rating. Molded polyester housing protects the coil assembly and... [See More]
- Primary Material: CPVC
- Valve Type: Solenoid
- Valve Size: 0.25
from U.S. Plastic Corporation
Flow-tested for minimum turbulence. Fully serviceable, replaceable components, uses standard o-ring seat. Safe-T-Blocked seal carrier - full rated pressure. Easily converted to foot valve. NSF Certified for potable water use. Sizes 1/2" - 2" pressure rated to 235 psi @ 73F, sizes 3" - 4" to 150 psi... [See More]
- Primary Material: CPVC
- Valve Type: Check
- Valve Size: 0.50
- Connection Description: Threaded; Union; Socket Weld
from U.S. Plastic Corporation
Multi-featured industrial grade. Built-in handle lockout. Fully serviceable, replaceable components. Safe-T-Blocked seal carrier - full rated pressure. Spears dual o-ring Safe-T-Shear stem. Self adjusting PTFE floating seat design. Sizes 1/2" - 2" pressure rated to 235 psi @ 73F, sizes 3" - 4" to... [See More]
- Primary Material: CPVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Type: Ball
from U.S. Plastic Corporation
Economical true union 2000 standard ball valve. Allows future system upgrade. Excellent for OEM applications. Replaceable seats. Safe-T-Blocked seal carrier - full rated pressure. Spears Safe-T-Shear stem. Self adjusting floating seat. Sizes 1/2" - 2" pressure rated to 235 psi @ 73F, sizes 3" - 4"... [See More]
- Primary Material: CPVC
- Connection Description: Threaded; Union; Socket Weld
- Valve Type: Ball
from U.S. Plastic Corporation
Sodium hypochlorite is inherently an unstable compound. Two things can happen to it in a piping system that will affect the choice of a valve. Sodium hypochlorite can decompose over time, which results in the formation of crystalline salts, and as it decomposes, one of the decomposition by-products... [See More]
- Primary Material: CPVC
- Valve Type: Ball
- Valve Size: 0.50
- Connection Description: Threaded; Union; Socket Weld