PEEK Plastic Valves
from Clippard
Like the NIV and PIV series, the AIV series features Clippard ’s unique multifunctional valve stem design for longer life and minimal dead volume. The difference with the AIV series is that it also provides the added benefit of air operation, which is —by definition... [See More]
- Primary Material: PEEK; PTFE
- Number of Ports: 3
- Maximum Pressure: 100.00
- Connection Description: #10-32, 1/4-28 UNF or 1/8 NPS
from RS Components, Ltd.
LVM10/100, 2/3 Port Solenoid Valve for C [See More]
- Primary Material: PEEK; PEEK
- Number of Ports: 2
- Valve Size: 0.20
- Valve Type: Solenoid
from Clippard
PIV series media isolation valves are solenoid-operated devices that utilize a flexible diaphragm to isolate the actuation mechanism from the fluid path. Media isolation valves are commonly used for a wide variety of applications, including those that require precise, repeatable dispensing of media... [See More]
- Primary Material: PEEK; PTFE
- Number of Ports: 2 to 3
- Maximum Pressure: 0.00 to 30.00
- Media Temperature: 158
from RS Components, Ltd.
1/8" PEEK Sol Valv 3mm orifice 24VDC [See More]
- Primary Material: PEEK; PEEK
- Number of Ports: 2
- Valve Size: 0.12
- Valve Type: Solenoid
from Clippard
PIV series media isolation valves are solenoid-operated devices that utilize a flexible diaphragm to isolate the actuation mechanism from the fluid path. Media isolation valves are commonly used for a wide variety of applications, including those that require precise, repeatable dispensing of media... [See More]
- Primary Material: PEEK; PTFE
- Number of Ports: 2 to 3
- Maximum Pressure: 30.00 to 100.00
- Valve Type: Solenoid; Diaphragm
from RS Components, Ltd.
1/8" PEEK Sol Valv 3mm orifice 24VDC [See More]
- Primary Material: PEEK; PEEK
- Number of Ports: 2
- Valve Size: 0.12
- Valve Type: Solenoid
from Clippard
The NIV series media isolation valve is a solenoid-operated device that utilizes a flexible diaphragm to isolate the actuation mechanism from the fluid path. Media isolation valves are commonly used for a wide variety of applications, including those that require precise, repeatable dispensing of... [See More]
- Primary Material: PEEK; PTFE
- Number of Ports: 2 to 3
- Maximum Pressure: 30.00
- Valve Type: Solenoid; Diaphragm
from Western Analytical Products
. Solenoid operated isolation valves provide fast reliable response to meet continuous duty performance at low power levels. Inert flow path of PTFE provides the highest level of chemical compatibility. Two way NC or NO or Three way configuration. Designed for over 20 million cycles. Fast response... [See More]
- Primary Material: PEEK
- Flow (Cv): 0.01
- Maximum Pressure: 20.00
- Actuation: Electric
from Arcmed Bio-Chem
Inert For high purity applications and aggressive media handling, the fluid path in the solenoid operated isolation valve can be made entirely from extremely inert materials such as PTFE something that can not be done with pinch valves as PTFE tubing would be too hard to pinch. Our all-PTFE solenoid... [See More]
- Primary Material: PEEK
- Maximum Pressure: 20.00
- Valve Size: 0.03 to 0.05
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
The 2/2 way modular solenoid valves are direct acting in operation and have orifice sizes ranging from 1.5 mm up to 5 mm. 3/2 way versions with a 1.5 mm port through the coil are also available on request. Due to it's compact size, complex multi-valve assemblies with multiple medium channels are... [See More]
- Primary Material: PEEK; Polyetherimide (PEI)
- Maximum Pressure: 0.00 to 116.03
- Valve Size: 0.06 to 0.20
- Number of Ports: 2
from ASCO
2 way and 3 way 10mm wide manifold mount isolation valve with 13 microliter internal volume. PEEK body with FFKM, EPDM, or FKM elastomers with a variety of pressures and orifice sizes available. [See More]
- Primary Material: PEEK
- Maximum Pressure: 44.00
- Valve Size: ? to 0.39
- Number of Ports: 2
from Gems Sensors & Controls
KS Series isolation solenoid valves are 2-way, normally Closed (NC) valves featuring 0.38" (10 mm) solenoid shell diameters. The isolation valve design ensures that the only wetted parts are the valve diaphragm and the valve body. For exceptional chemical compatibility the KS Series utilizes PEEK or... [See More]
- Primary Material: PEEK; Polyphenylene Sulfide (PPS)
- Number of Ports: 2
- Maximum Pressure: 20.00
- Flow (Cv): 0.01 to 0.01
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 230 ℃ (446 ℉). SS316, Carbon Steel. 2-way and 3-way side and bottom entry. DK patented Locking Device optional. Panel Mounting optional. DK-LOK OD 1/4 - OD 1 inch. Pipe thread 1/4 -1 inch [See More]
- Primary Material: PEEK; PTFE; PVDF; Rubber; FKM End Sealing, PCTFE
- Maximum Pressure: 6000.00
- Valve Size: 0.39
- Number of Ports: 3
from First Sensor AG
The media isolated LQX12 solenoid valves feature a diaphragm optionally made of EPDM or FFKM elastomer and are compatible with aggressive liquids and gases. The 12 mm valves achieve high flow rates of 25 l/min air at 50 psi (3.5 bar) and offer a manifold sub-base. Optionally, 3-way versions are... [See More]
- Primary Material: PEEK
- Maximum Pressure: 50.00
- Valve Size: 0.25
- Number of Ports: 2 to 3
from Clark Solutions
Model series WTA inert isolation valves offer great performance and a choice of wetted materials for compatibility with aggressive media. The valves utilize unique soft elastomeric seals that are forgiving of particulate matter that would typically destroy an inert valve. The WTA series are a two... [See More]
- Primary Material: PEEK
- Maximum Pressure: 29.01
- Valve Size: 0.08
- Number of Ports: 2
from Western Analytical Products
Three way and two way isolation valves. [See More]
- Primary Material: PEEK
- Actuation: Electric
from ASCO
The Series 385 is a 16 mm wide, manifold mount, miniature. isolation valve designed to control the flow of aggressive. chemicals or high purity fluids. The Series 385 offers the. following benefits: • Compact manifold design saves space and reduces. assembly time. • Prevents contamination... [See More]
- Primary Material: PEEK
- Number of Ports: 2
- Maximum Pressure: 35.00
- Media Temperature: 14 to 140
from Gems Sensors & Controls
MOPD: 10 psig to 30 psig (1 to 2 bar); to 60 psig (4 bar) on 3-way. CV Range: 0.011 to 0.105. As low as 2.8 Watts. 2-Way, Normally Open/Closed; 3-Way Directional. These isolation solenoid valves offer 2-way Normally Open (NO) and Closed (NC), or 3-way Directional Control operation. While sharing... [See More]
- Primary Material: PEEK; PTFE; ETFE, PPS, PSU
- Number of Ports: 2 to 3
- Maximum Pressure: 10.00 to 30.00
- Flow (Cv): 0.01 to 0.10
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 230 ℃ (446 ℉). SS316, Carbon Steel. 2-way and 3-way side and bottom entry. DK patented Locking Device optional. Panel Mounting optional. DK-LOK OD 1/4 - OD 1 inch. Pipe thread 1/4 -1 inch [See More]
- Primary Material: PEEK; PTFE; PVDF; Rubber; FKM End Sealing, PCTFE
- Maximum Pressure: 6000.00
- Valve Size: 0.39
- Number of Ports: 3
from First Sensor AG
The R6 miniature diaphragm isolation valve delivers liquid dispense performance in a very small package. At just 6.4 mm width it can be easily mounted over microplates improving performance and saving space. When mounted on a manifold, the ultra small footprint of the R6 Valve enables smaller and... [See More]
- Primary Material: PEEK
- Maximum Pressure: 7.25 to 14.50
- Valve Size: 0.25
- Number of Ports: 2
from Clark Solutions
Model CTV-K or CTV-R isolation valves have molded PEEK or PPS valve bodies and PTFE isolation diaphragm materials for compatibility with aggressive media. The valves are standard with unique Perfluor soft elastomeric seals, which are forgiving of particulate matter that would typically damage a... [See More]
- Primary Material: PEEK; PPS
- Maximum Pressure: 14.80 to 29.00
- Valve Size: 0.25 to 6.00
- Number of Ports: 3
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 230 ℃ (446 ℉). SS316, Carbon Steel. 2-way and 3-way side and bottom entry. DK patented Locking Device optional. Panel Mounting optional. DK-LOK OD 1/4 - OD 1 inch. Pipe thread 1/4 -1 inch [See More]
- Primary Material: PEEK; PTFE; PVDF; Rubber; FKM End Sealing, PCTFE
- Maximum Pressure: 4000.00
- Valve Size: 0.50
- Number of Ports: 3
from First Sensor AG
The R9 delivers the liquid flow capabilities of a 16 mm valve with a 9 mm envelope. A 44 % reduction in width with unrivaled flows and pressures to 100 psi. Designed to offer low carryover performance with particulate and crystallization resistance, this valve is ideally suited for today ’s... [See More]
- Primary Material: PEEK
- Maximum Pressure: 20.00 to 100.00
- Valve Size: 0.25
- Number of Ports: 3
from Clark Solutions
Model MTV-3N inert 3-way isolation valve offers great performance and a choice of wetted materials for compatibility with aggressive media. The valves utilize unique soft elastomeric seals which are forgiving of particulate matter that would typically destroy an inert valve. The MTV-3N is offered... [See More]
- Primary Material: PEEK; PPS
- Maximum Pressure: 29.01
- Valve Size: 0.07
- Number of Ports: 3
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 204 ℃ (399 ℉) with FKM o-ring seal. Up to 250 ℃ (482 ℉) with Kalrez o-ring. Premium four(4) sealing on stem for high pressure. Stem seal below actuating threads prevent system fluid contamination. SS316. Pipe thread 1/4 -1/2 inch [See More]
- Primary Material: PEEK; POM C, opt. Kalrez or Viton
- Maximum Pressure: 10000.00
- Valve Size: 0.19
- Number of Ports: 2
from Clark Solutions
Model MTV-R/K inert isolation valves offer great performance and a choice of wetted materials for compatibility with aggressive media. The valves utilize unique soft elastomeric seals which are forgiving of particulate matter that would typically destroy an inert valve. The MTV series are available... [See More]
- Primary Material: PEEK
- Maximum Pressure: 29.01
- Valve Size: 0.08
- Number of Ports: 2
from Clark Solutions
Model EXV-2MF manifold mount inert isolation valves mount directly on customer designed manifold blocks. A Perfluor gasket provides sealing. The valves have molded PEEK PPS valve bodies and unique Perfluor soft elastomeric seals which are forgiving of particulate matter that would typically scratch... [See More]
- Primary Material: PEEK
- Maximum Pressure: 29.01
- Valve Size: 0.04
- Number of Ports: 2
from Clark Solutions
Model STV-K or STV-R isolation valves have molded PEEK or PPS valve bodies and PTFE isolation diaphragm materials for compatibility with aggressive media. The valves are standard with unique Perfluor soft elastomeric seals which are forgiving of particulate matter that would typically damage a... [See More]
- Primary Material: PEEK
- Maximum Pressure: 29.01
- Valve Size: 0.05
- Number of Ports: 3
from Clark Solutions
Model STV-K-1 isolation valves have molded PEEK valve bodies and PTFE isolation diaphragm materials for compatibility with aggressive media. The valves are standard with unique Perfluor soft elastomeric seals which are forgiving of particulate matter that would typically damage a plastic valve seat. [See More]
- Primary Material: PEEK
- Maximum Pressure: 29.01
- Valve Size: 0.07
- Number of Ports: 3
from Clark Solutions
Model STV-M manifold mount inert isolation valves mount directly on customer designed manifold blocks. An “O ” ring provides sealing. The valves are available with unique Perfluor soft elastomeric seals which are forgiving of particulate matter that would typically scratch a PTFE valve... [See More]
- Primary Material: PEEK; HPVC
- Maximum Pressure: 29.01
- Valve Size: 0.04
- Number of Ports: 2
from Clark Solutions
Model series WTB inert isolation valves offer great performance and a choice of wetted materials for compatibility with aggressive media. The valves utilize unique soft elastomeric seals that are forgiving of particulate matter that would typically destroy an inert valve. The WTB series is a... [See More]
- Primary Material: PEEK
- Maximum Pressure: -12.77 to 29.00
- Valve Size: 0.25 to 6.00
- Number of Ports: 3