Needle Valves Plastic Valves
from Radwell International
NEEDLE VALVE, H-300U SERIES, 316 STAINLESS STEEL BODY, LET-LOK END CONNECTION, REGULATING STEM, 3/8 INCH END CONNECTION SIZE, BLACK PLASTIC HANDLE, 5000 MAX PSI. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Needle
from Radwell International
NEEDLE VALVE, H-300U SERIES, STRAIGHT AND ANGLE PATTERN, 5000 PSI MAX PRESSURE, FLOW COEFFICIENT 0.09 TO 1.8CV, END CONNECTION SIZE: 1/4 INCH, BLACK PLASTIC HANDLE, REGULATING STEM, NPT THREADS, STAINLESS STEEL. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Needle
- Connection Description: Threaded
from Radwell International
NEEDLE VALVE, VALVE SERIES: H-3, 95=MALE TO LET-LOK, SS=316SS BODY MATERIAL, NL=NPT TO LET-LOK, R=REGULATING STEM, 1/4=6MM END CONNECTION SIZE, RS=BLACK PLASTIC HANDLE, STRAIGHT. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Needle
from Radwell International
VALVE PLUG KIT, 10 PLASTIC CAPS, 3 VITON O-RINGS, 3 PLUG SEALS, 5 SYRINGE NEEDLES, 316L STAINLESS STEEL VALVE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Needle; Plug
from Cole-Parmer
Plug valves are FDA-approved and feature PFA seals and nuts. [See More]
- Valve Type: Needle
- Primary Material: PFA
from Hayward Flow Control
NVA Series needle valves are available in PVC and GF-PP. They have FPM o-rings and a PTFE seat. End connections are threaded only and all valves areassembled with silicone free lubricant. Features. Lugs for Panel Mounting. Adjustable Without Tools. Fine Pitch Stem Thread. Rated at 150 PSI @ 70F. PVC... [See More]
- Valve Type: Needle
- Maximum Pressure: 150.00
- Valve Size: 0.25 to 0.50
- Number of Ports: 2
from U.S. Plastic Corporation
Hayward NVA Series needle valves are used for accurate metering of fluids. Turning the thumbwheel moves a tapered piston into the PTFE seat to control the flow down to a few drops per minute. Precision molded, fine pitched stem threads permit this very fine metering flow control, flanges for panel... [See More]
- Valve Type: Needle
from Aalborg Instruments
Design Features. Fluids contact PTFE and PCTFE only. One PTFE o-ring. Simplicity, only six components [See More]
- Valve Type: Needle
- Maximum Pressure: 75.00
- Valve Size: 0.38
- Number of Ports: 2
from Air Logic
The plastic Needle Valves are ideal for instrumentation and industrial applications; they are designed for inline and panel mounted installation. The Needle Valves are adjustable from 0 to the equivalent flow of a 0.025" diameter orifice; the flow is restricted in both directions. The 6 degree angle... [See More]
- Valve Type: Needle
- Number of Ports: 2
- Valve Size: 0.03 to 0.06
- Media Temperature: 40 to 120
from DK-LOK U.S.A.
Up to 6000psig (413 bar). Up to 232 ℃ (450 ℉). SS316 and Alloys. Vee Tip standard. Compact design. DK-LOK OD1/4 - 1/2 inch [See More]
- Valve Type: Needle
- Maximum Pressure: 6000.00
- Valve Size: 0.12
- Number of Ports: 2
from Hi-Tech Controls, Inc.
Bidirectional flow controller for mounting on single-acting and double-acting cylinders and. valves. Knurled screw with internal hex slot. Ports G1/8, G1/4, G3/8, G1/2 [See More]
- Valve Type: Needle
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Media Temperature: 32 to 140
from GF Piping Systems
The Type 522 Needle Valve may be used in a wide range of services where SYGEF ® is suitable in the chemical and general environmental limits of the installation. Specific applications should be evaluated on the basis of pressure, temperature and flow capacity desired. The ¼" and ⅜"... [See More]
- Valve Type: Needle
- Maximum Pressure: 150.00
- Valve Size: 0.25 to 0.50
- Primary Material: PP; PVDF
from OMEGA Engineering, Inc.
The FVLT100 Series compact and reliable PTFE needle valves are designed for laboratory and industrial applications for regulating corrosive gases and liquids or for high purity service. They may also be used as shut off valves. [See More]
- Valve Type: Needle
- Maximum Pressure: 75.00
- Valve Size: 0.12 to 0.25
- Number of Ports: 2
from Cole-Parmer
PVC and PP valves withstand up to 150 psi; PVDF up to 200 psi. Seats are made of PTFE and O-rings made of Viton <reg >. Pipe thread connections. [See More]
- Valve Type: Needle
- Primary Material: PP
- Maximum Pressure: 150.00
from Hayward Flow Control
Available in PVC, CPVC, GFPP and PVDF materials and construction. The NVA Series features an integrated stem with a PTFE seat for superior control, purity and performance. Sizes range from 1/4 in. (DN8) to 1/2 in. (DN10). FPM Seals are standard. All valves carry a pressure rating of 150 psi / 10 bar... [See More]
- Valve Type: Needle
- Flow (Cv): 0.64 to 0.79
- Valve Size: 0.25 to 0.50
- Primary Material: PVC; GFPP
from U.S. Plastic Corporation
The 586 series needle valve compact design promotes multiple configurations to fit the exact end use application. Rated to 125 psi. They have a 2.5 tip except for the 22299 which has a 45 tip. Has EPDM stem seal and black filled polyester knob. The panel mount requires a .875" hole and is supplied... [See More]
- Valve Type: Needle
- Primary Material: PP
- Valve Size: 0.12
from DK-LOK U.S.A.
Up to 10000psig (689 bar). Up to 204 ℃ (399 ℉) with FKM o-ring seal. Up to 250 ℃ (482 ℉) with Kalrez o-ring. Premium four(4) sealing on stem for high pressure. Stem seal below actuating threads prevent system fluid contamination. SS316. Pipe thread 1/4 -1/2 inch [See More]
- Valve Type: Needle
- Maximum Pressure: 10000.00
- Valve Size: 0.19
- Number of Ports: 2
from Hi-Tech Controls, Inc.
Right angle flow controller for mounting on single-acting and double-acting cylinders and valves. Knurled screw adjustment with internal hex slot. Ports G1/8, G1/4, G3/8, G1/2 [See More]
- Valve Type: Needle
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Media Temperature: 32 to 140
from Cole-Parmer
PVC and PP valves withstand up to 150 psi; PVDF up to 200 psi. Seats are made of PTFE and O-rings made of Viton <reg >. Pipe thread connections. [See More]
- Valve Type: Needle
- Primary Material: PVDF
- Maximum Pressure: 200.00
from U.S. Plastic Corporation
The 586 series needle valve compact design promotes multiple configurations to fit the exact end use application. Rated to 125 psi. They have a 2.5 tip except for the 22299 which has a 45 tip. Has EPDM stem seal and black filled polyester knob. The panel mount requires a .875" hole and is supplied... [See More]
- Valve Type: Needle
- Primary Material: PP
- Valve Size: 0.12
from Hi-Tech Controls, Inc.
Unidirectional flow controller for mounting on single-acting and double-acting cylinders and valves. Knurled screw with internal hex slot. Ports G1/8, G1/4, G3/8, G1/2 [See More]
- Valve Type: Needle
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Media Temperature: 32 to 140
from U.S. Plastic Corporation
The 586 series needle valve compact design promotes multiple configurations to fit the exact end use application. Rated to 125 psi. They have a 2.5 tip except for the 22299 which has a 45 tip. Has EPDM stem seal and black filled polyester knob. The panel mount requires a .875" hole and is supplied... [See More]
- Valve Type: Needle
- Primary Material: PP
- Valve Size: 0.25
from Hi-Tech Controls, Inc.
Meter-In Unidirectional flow controller for mounting on cylinders and valves. Knurled screw adjustment, with internal hex slot. Ports 1/8", 1/4", 3/8", 1/2" NTPF [See More]
- Valve Type: Needle
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Number of Ports: 2
from U.S. Plastic Corporation
The 586 series needle valve compact design promotes multiple configurations to fit the exact end use application. Rated to 125 psi. They have a 2.5 tip except for the 22299 which has a 45 tip. Has EPDM stem seal and black filled polyester knob. The panel mount requires a .875" hole and is supplied... [See More]
- Valve Type: Needle
- Primary Material: PVC
- Valve Size: 0.12
from Hi-Tech Controls, Inc.
Right angle flow controller for mounting on cylinders and valves. Knurled screw adjustment, with internal hex slot. Ports 1/8", 1/4", 3/8", 1/2" NPTF [See More]
- Valve Type: Needle
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Number of Ports: 2
from U.S. Plastic Corporation
The 586 series needle valve compact design promotes multiple configurations to fit the exact end use application. Rated to 125 psi. They have a 2.5 tip except for the 22299 which has a 45 tip. Has EPDM stem seal and black filled polyester knob. The panel mount requires a .875" hole and is supplied... [See More]
- Valve Type: Needle
- Primary Material: PVC
- Valve Size: 0.12
from Hi-Tech Controls, Inc.
Meter-In Unidirectional flow controller for mounting on cylinders and valves. Knurled screw adjustment, with internal hex slot. Ports 1/8", 1/4", 3/8", 1/2" NTPF [See More]
- Valve Type: Needle
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Number of Ports: 2
from U.S. Plastic Corporation
The 586 series needle valve compact design promotes multiple configurations to fit the exact end use application. Rated to 125 psi. They have a 2.5 tip except for the 22299 which has a 45 tip. Has EPDM stem seal and black filled polyester knob. The panel mount requires a .875" hole and is supplied... [See More]
- Valve Type: Needle
- Primary Material: PVC
- Valve Size: 0.25
from U.S. Plastic Corporation
The 586 series needle valve compact design promotes multiple configurations to fit the exact end use application. Rated to 125 psi. They have a 2.5 tip except for the 22299 which has a 45 tip. Has EPDM stem seal and black filled polyester knob. The panel mount requires a .875" hole and is supplied... [See More]
- Valve Type: Needle
- Primary Material: PVC
- Valve Size: 0.25