Pinch Valves Plastic Valves
from DeZURIK, Inc.
Red Valve ’s all new Type R all-elastomer pinch valve is an ideal valve for water, chemical, solids and slurry applications. The valve is easily installed between two pieces of pipe with hose clamps. Simply add 20 psi air pressure over line pressure and the valve closes drop tight. For example... [See More]
- Valve Type: Pinch
from NResearch
Suitable for applications where fluid must be isolated from the valve parts. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with one foot of silicone tubing standard, sizes listed below are standard. Consult factory for use with... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 2
from Clark Solutions
Model EPK pinch valves are large, rugged pinch valves for use with 10 mm and 15 mm I.D. silicone tubing. The valves are particularly well suited for on/off fluid control applications where the fluid media is difficult for conventional valves to handle or where the complete fluid system wetted... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 7.25
- Valve Size: 0.39 to 0.59
- Number of Ports: 1
from Valcor Engineering Corporation
The SV23 series pinch valves are available in normally closed, normally open and close-open configuration. These pinch valves are used in applications where the media needs to be completely isolated from any valve parts. They are available in single or multi tube configuration and are capable of... [See More]
- Valve Type: Pinch
- Number of Ports: 2 to 3
- Maximum Pressure: 30.00
- Primary Material: PTFE
from Milton Roy
Pinch valves control the flow of fluids (liquid, gas or power) and provide a leak-proof seal when closed. They are cost-effective, simple to install and require little maintenance. The valves are made up of a valve body and a cylindrical sleeve reinforced with natural or synthetic rubber. Typically... [See More]
- Valve Type: Pinch
- Primary Material: PVC
from Watson-Marlow Fluid Technology Group
BioValve is a precision restriction flow controller and shut-off valve for use in bioprocessing and pharmaceutical manufacturing applications. Lot numbers moulded in for full traceability. Profiled to minimise flow path turbulence. Thread pitch is calibrated to 2mm per turn, permitting controlled... [See More]
- Valve Type: Pinch
- Number of Ports: 2
- Maximum Pressure: 150.00
- Primary Material: Nylon
from Arcmed Bio-Chem
What is a Solenoid Operated Pinch Valve? A Pinch Valve is a solenoid operated valve allowing a full bore flow passage through a flexible tube which is "pinched" off to produce a tight seal. Only the easily replaceable tubing comes into contact with the fluid making this style of... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 0.00 to 30.00
- Valve Size: 0.01 to 0.06
- Number of Ports: 2
from NResearch
Suitable for applications where fluid must be isolated from the valve parts. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with one foot of silicone tubing standard, sizes listed below are standard. Consult factory for use with... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 2
from Clark Solutions
Model PS Pinch Valves offer excellent reliability in a compact, versatile design. Reasonable cost and consistent performance are accomplished through molding and automated assembly technology. [See More]
- Valve Type: Pinch
- Maximum Pressure: 21.76
- Valve Size: 0.09 to 0.80
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of two streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with one two one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 4
from Clark Solutions
Model PS pinch valve offers excellent reliability in a compact, versatile design. Reasonable cost and consistent performance are accomplished through molding and automated assembly technology. Model PS is available in three way (dual tube), two way normally open (single tube) or two way normally... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 21.76
- Valve Size: 0.13 to 1.60
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of two NC streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with two one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Solenoid; Pinch; Diverter
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 4
from Clark Solutions
Model PK pinch valves are rugged pinch valves for use with 1.6, 3.2 and 4.8 mm I.D. Silicone tubing. The valves are particularly well suited for on/off fluid control applications where the fluid media is difficult for conventional valves to handle or where the complete fluid system wetted components... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 7.25
- Valve Size: 0.19 to 0.38
- Number of Ports: 1
from NResearch
Suitable for pinch applications that require synchronous switching of two NO streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with two one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Solenoid; Pinch; Diverter
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 4
from Clark Solutions
Model PM pinch valve offers excellent reliability in a compact, versatile design. Reasonable cost and consistent performance are accomplished through molding and automated assembly technology. Each model can be configured for three way (dual tube), two way normally open (single tube) or two way... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 21.76
- Valve Size: 0.09 to 0.12
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of four streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with four one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 8
from NResearch
Suitable for pinch applications that require synchronous switching of four streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with four one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Solenoid; Pinch; Diverter
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 8
from NResearch
Suitable for pinch applications that require synchronous switching of four streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with four one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.06
- Number of Ports: 8
from NResearch
Suitable for pinch applications that require synchronous switching of eight streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with eight one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.03
- Number of Ports: 16
from NResearch
In addition to already exceptional low power consumption, our environmental friendly Full Opening Latching GreenValve®, only requires power for approximately 100 milliseconds each time it changes its state. While the valve remains in a continuous closed or open state, there is absolutely no need for... [See More]
- Valve Type: Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.06 to 0.12
- Number of Ports: 2