Mechanical Device Plastic Valves
from Plast-O-Matic Valves, Inc.
Series DGV United States Patent #7,481,238 B2. Unique float design opens as air or gas collects in the valve, closes when liquid returns, allowing continuous expulsion of trace amounts of gas as it occurs. 1/2 ″ tee connection for virtually any pipe size; offered in a variety of corrosion... [See More]
- Actuation: Mechanical
- Maximum Pressure: 100.00
- Valve Size: 0.50
- Number of Ports: 2
from Valcor Engineering Corporation
The SV111 is a spring-activated check valve with disc type seating. It has a relatively low, yet realistic rated cracking pressure, resulting in quick response to changes in fluid pressure. The optically flat PTFE seal disc and seat provides drip tight sealing on most fluids. It ’s small... [See More]
- Actuation: Mechanical
- Maximum Pressure: 100.00
- Valve Size: 0.25
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from Barksdale Control Products
The 55521 Air Suspension Valve utilizes Barksdale's patented Shear-Seal ® technology to accurately control suspension height in commercial and recreational vehicle applications. Shear-Seal ® has become the industry leader through superior performance and long life, even under the most... [See More]
- Actuation: Mechanical
- Number of Ports: 4
- Maximum Pressure: 130.00
- Media Temperature: -40 to 150
from Cat Pumps - High Pressure Pumps & Systems
A Thermal Valve is used to eliminate heat build-up in a closed loop by-pass system when liquid is being returned to the pump inlet. Thermal Valves can only be installed when there is a pressurized pump inlet. During recirculation of by-pass liquid, the thermal valve will detect temperature rises in... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 125.00
- Valve Size: 0.25
- Number of Ports: 2
from AVK International A/S
Wide variety or polyethylene (PE), Stainless steel and steel bal valves. The PE100 ball valves are produced with state-of-the-art machinery to guarantee a consistently high quality. We are able to trace the components throughout the manufacturing process from the initial injection moulding over... [See More]
- Actuation: Manual; Mechanical
- Media Temperature: -76 to 302
- Valve Size: 0.75 to 6.00
- Valve Type: Ball
from Nordson Medical
30 psi back pressure, 1/4 psi inlet cracking pressure [See More]
- Actuation: Mechanical
- Valve Type: Check
- Number of Ports: 2
- Primary Material: Polycarbonate with Silicone Disk
from Parker Hannifin / Automation / Pneumatic - Europe
Non-Return Valves. Brass, aluminium or polyurethane body versions. Threaded of push-in connections. Full flow in one direction only. Compact designs. Low operating pressure [See More]
- Actuation: Mechanical
- Maximum Pressure: 145.04
- Valve Size: 0.12
- Number of Ports: 2
from DK-LOK U.S.A.
Up to 6000psig (413bar). Up to 204 ℃ (400 ℉). SS316. Cracking pressure 50 to 6000psing (3.4 to 413bar). DK-LOK OD 1/4 - 1/2 inch. Pipe thread 1/4 - 1/2 inch [See More]
- Actuation: Mechanical
- Maximum Pressure: 3000.00
- Valve Size: 0.19
- Number of Ports: 2
from XOMOX (A Crane Co. Company)
As the innovator and leader in diaphragm valves, we continually develop our diaphragm technology and remain the only manufacturer to have complete ownership of the research and development, design and production involved. Saunders offers a full range of diaphragm selections engineered to meet the... [See More]
- Actuation: Mechanical
- Number of Ports: 2
- Valve Size: 0.25
- Valve Type: Diaphragm
from Hi-Tech Controls, Inc.
Bidirectional flow controller for mounting on single-acting and double-acting cylinders and. valves. Knurled screw with internal hex slot. Ports G1/8, G1/4, G3/8, G1/2 [See More]
- Actuation: Mechanical
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Media Temperature: 32 to 140
from Equilibar, LLC.
Equilibar introduces a new type of vacuum regulator with more than 5X the flow stability of traditional spring regulators. That means that your vacuum process can remain stable even as gas flow rate changes over wide ranges. Can be used with manual set-point adjustment or computer automation. Is... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 14.74
- Valve Size: 0.25 to 4.00
- Number of Ports: 2
from Hayward Flow Control
HCTB Series ready for actuation ball valves are the TB Series without a handle or a mounting kit. In other words, these valves are ready for actuation. If an actuator is ordered with the valve, the mounting kit is included at no charge. The mounting kit is determined by the choice or type of... [See More]
- Actuation: Mechanical
- Number of Ports: 2
- Valve Size: 0.50 to 6.00
- Valve Type: Ball
from Xylem Applied Water Systems
Water Pressure Regulator Inline. FLOJETS 1750 series Water Pressure Regulator reduces inlet water pressure to safe levels for pumps and appliances. Equipment is additionally protected from water-borne debris and particulates by the regulator's removable, cleanable inlet screen. Models are available... [See More]
- Actuation: Mechanical
- Number of Ports: 2
- Valve Size: 0.50
- Media Temperature: 150
from A. u. K. Müller GmbH & Co. KG
2/2-way direct acting drain valve of nominal diameter DN 40 for controlling low aggressive liquid media, such as cleaning or disinfection agents, with normally closed operation mode NC (normally closed). Valves of this type are medium separated having a single chamber valve body with the inlet at... [See More]
- Actuation: Mechanical
- Number of Ports: 2
- Maximum Pressure: 0.00 to 1.74
- Media Temperature: 122 to 208
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from Hi-Tech Controls, Inc.
Right angle flow controller for mounting on single-acting and double-acting cylinders and valves. Knurled screw adjustment with internal hex slot. Ports G1/8, G1/4, G3/8, G1/2 [See More]
- Actuation: Mechanical
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Media Temperature: 32 to 140
from Equilibar, LLC.
Precision Back Pressure Regulator. For gas & mixed phase processes. Rugged Bar Stock Design. Available in ¼ inch through 1 inch sizes. SS316 standard with Hastelloy C optional. Diaphragms available in PTFE, Hastelloy, SS316, and polyimide. The GS series is specifically designed for a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 2500.00
- Valve Size: 0.12 to 1.00
- Number of Ports: 2
from Hayward Flow Control
The IV Series Injection Valves and IQ Series Injection Quills facilitate injection of chemicals away from pipe or tank inner walls, ensuring rapid mixing and preventing corrosion. Each design includes a built-in ball check valve with Hastelloy CTM spring to prevent back-flow of the process liquid... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 1.00
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
2/2-way direct acting dump valve of nominal diameter DN 50 for controlling low aggressive liquid media, such as cleaning or disinfection agents, direct acting with normally closed operation mode NC (normally closed). Valves of this type are medium separated having a single chamber valve body with... [See More]
- Actuation: Mechanical
- Number of Ports: 2
- Maximum Pressure: 0.00 to 1.74
- Media Temperature: 122 to 208
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from Hi-Tech Controls, Inc.
Unidirectional flow controller for mounting on single-acting and double-acting cylinders and valves. Knurled screw with internal hex slot. Ports G1/8, G1/4, G3/8, G1/2 [See More]
- Actuation: Mechanical
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Media Temperature: 32 to 140
from Equilibar, LLC.
Standard Pressure Range: 0.02 (.5 ” WC) to 1500 psig. Ultra Low to Zero flow performance. Standard Cv from 1E-11 to 0.01. Standard 316L Stainless Steel Body; Hastelloy C and PTFE also available. NPT, VCR/VCO type and Valco (low dead volume) ends available. Wide Variety of Diaphragms Including... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 3000.00
- Valve Size: 0.12
- Number of Ports: 2
from Hayward Flow Control
SLC Series Y-Check valves are available in PVC only. Seals are FPM or EPDMand are offered in threaded body version only. True union end connections are available in socket or threaded styles. All valves are assembled with silicone free lubricant. Features. PVC. Full Flow Design. Closes with No Back... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. The outlet jet is directed on to a guide, which... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.39
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from Hi-Tech Controls, Inc.
Meter-In Unidirectional flow controller for mounting on cylinders and valves. Knurled screw adjustment, with internal hex slot. Ports 1/8", 1/4", 3/8", 1/2" NTPF [See More]
- Actuation: Manual; Mechanical
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Number of Ports: 2
from Equilibar, LLC.
Precision Back Pressure Regulator. For liquid, gas & mixed phase processes. SS316 Rugged Bar Stock Design. Unique Chatter Suppression Feature in liquid only applications. High Precision and sensitivity. PTFE, stainless steel, and Hastelloy diaphragms available. The NL series back pressure... [See More]
- Actuation: Mechanical
- Maximum Pressure: 0.00 to 500.00
- Valve Size: 1.00 to 4.00
- Number of Ports: 2
from Hayward Flow Control
TC Series true union ball check valves are offered in PVC, Corzan CPVC, and PP. O-rings and seats are FPM or EPDM. 1/4 in. and 3/8 in. sizes are PVConly and are trim check design. They have socket or threaded end connections. Others up to 2 in. sizes have socket and threaded end connections. All... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.25 to 6.00
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.39
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from Hi-Tech Controls, Inc.
Right angle flow controller for mounting on cylinders and valves. Knurled screw adjustment, with internal hex slot. Ports 1/8", 1/4", 3/8", 1/2" NPTF [See More]
- Actuation: Manual; Mechanical
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Number of Ports: 2
from Hayward Flow Control
YC Series y-check valves are offered in PVC and Corzan CPVC. O-rings are FPM standard but EPDM is available. All sizes are either socket, threaded or flanged body style. True union socket or threaded end connections are available. For spring-loaded y-check valves, see the SLC Series. All valves are... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.50 to 4.00
- Number of Ports: 3
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 10, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.39
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from Hi-Tech Controls, Inc.
Meter-In Unidirectional flow controller for mounting on cylinders and valves. Knurled screw adjustment, with internal hex slot. Ports 1/8", 1/4", 3/8", 1/2" NTPF [See More]
- Actuation: Manual; Mechanical
- Maximum Pressure: 145.00
- Valve Size: 0.12
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 13, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. The outlet jet is directed on to a guide, which... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.51
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.25
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 13, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.51
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.25
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 13, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.51
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.25
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
This servo-controlled valve has an orifice size of 13 mm and is operated by means of a float to control the level in a tank. If liquid is drained from the tank, the float valve opens automatically and then closes when the maximum level has been reached. Whilst the water level and float rise, the... [See More]
- Actuation: Mechanical
- Maximum Pressure: 11.60 to 145.04
- Valve Size: 0.51
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.25
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
Servo-controlled valve nominal diameter DN 17, which closes by means of buoyancy of a floater to control level in tanks. If liquid is drained from the tank, the float valve refills automatically and closes when the maximum level has been reached. While water level and floater rises, the flow into... [See More]
- Actuation: Mechanical
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.67
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.25
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
This servo-controlled valve has an orifice size of 17 mm and is operated by means of a float to control the level in a tank. If liquid is drained from the tank, the float valve opens automatically and then closes when the maximum level has been reached. Whilst the water level and float rise, the... [See More]
- Actuation: Mechanical
- Maximum Pressure: 11.60 to 145.04
- Valve Size: 0.67
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.25
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
The pressure regulator converts variable inlet pressures into a lower, constant outlet pressure. It can be used to protect equipment from high or inconsistent incoming medium pressure. This reduced and constant outlet pressure also enables a constant flow rate to be achieved independently of the... [See More]
- Actuation: Mechanical
- Number of Ports: 2
- Maximum Pressure: 232.06
- Media Temperature: 176
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.38
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
The pressure regulator converts variable inlet pressure into a lower, constant outlet pressure. It can be used to protect equipment from high or inconsistent incoming medium pressure. This reduced and constant outlet pressure also enables a constant flow rate to be achieved independently of the... [See More]
- Actuation: Mechanical
- Number of Ports: 2
- Maximum Pressure: 43.51 to 145.04
- Media Temperature: 194
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.38
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
Float valves are commonly used in industrial applications to maintain a constant level in a tank. For cleaning purposes the tank is often drained and the water supply has to be isolated to prevent the float valve automatically refilling the tank. By incorporating a normally closed servo-controlled... [See More]
- Actuation: Mechanical; Electric
- Maximum Pressure: 4.35 to 145.04
- Valve Size: 0.39
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.38
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.38
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12 to 0.19
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12
- Number of Ports: 2
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Valve Type: Check
- Number of Ports: 2
- Primary Material: Polycarbonate
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Valve Type: Check
- Number of Ports: 2
- Primary Material: Polycarbonate
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Valve Type: Check
- Number of Ports: 2
- Primary Material: Polycarbonate
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Actuation: Mechanical
- Maximum Pressure: 150.00
- Valve Size: 0.12
- Number of Ports: 2