Pinch Valves Solenoid Valves
from Clippard
The Clippard NPV Series Pinch Valve is a solenoid-operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where... [See More]
- Valve Type: Single Solenoid; Pinch
- Number of Ports: 2
- Maximum Pressure: 30.00
- Power: 12
from Radwell International
DISCONTINUED BY MANUFACTURER, SOLENOID PINCH VALVE, VERSAGRIP. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Pinch
from Clippard
The NPV Series Pinch Valve is a solenoid-operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where fluid... [See More]
- Valve Type: Single Solenoid; Pinch
- Number of Ports: 2 to 3
- Maximum Pressure: 30.00
- Power: 12 to 24
from Radwell International
DISCONTINUED BY MANUFACTURER, SOLENOID PINCH VALVE, 12 VDC, 30 PSI. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Pinch
from Clippard
Clippard ’s NPP Series 2-Way pneumatic pinch valves are air-piloted devices designed to open or close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead... [See More]
- Valve Type: Pinch
- Number of Ports: 2
- Maximum Pressure: 250.00
- Unpowered State: Normally Open; Normally Closed
from Radwell International
DISCONTINUED BY MANUFACTURER, SOLENOID OPERATED PINCH VALVE, 24 VDC. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Pinch
from Radwell International
SOLENOID VALVE, SERIES 284, MINIATURE PINCH VALVE, 24 VDC COIL, 2/2 NO, 13 W, ALUMINIUM. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Pinch
from Arcmed Bio-Chem
What is a Solenoid Operated Pinch Valve? A Pinch Valve is a solenoid operated valve allowing a full bore flow passage through a flexible tube which is "pinched" off to produce a tight seal. Only the easily replaceable tubing comes into contact with the fluid making this style of... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 30.00
- Valve Size: 0.010 to 0.062
- Number of Ports: 2
from IMI Bimba
Supports tubing or disposable membrane bags ranging up to 0.375 inch OD or 3.2 – 9.5 mm sizing and average Durometer up to 60 Shore A and 15 psi media pressure. Several different configurations are available being single-tube normally open, single-tube normally closed, dual tubes toggling... [See More]
- Valve Type: Pinch
- Media: Air; Compressed Air; Liquid Handling
- Power: 24
from Acro Associates, Inc.
Acro's Intelivalve ™ solenoid pinch valve line offers unmatched innovation in performance and reliability. These valves come featured with adaptive power management, valve state sensing, tube detection, noise reduction and built in data monitoring all in a compact format making them the... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.063 to 0.125
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
The 16.001.116 pinch valve series is normally closed in operation and is designed for flexible tubes up to an outer diameter of 2,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.039
- Number of Ports: 2
from NResearch
Suitable for applications where fluid must be isolated from the valve parts. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with one foot of silicone tubing standard, sizes listed below are standard. Consult factory for use with... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.030
- Number of Ports: 2
from Cole-Parmer
Solenoid Electric Valves (actuated) [See More]
- Valve Type: Pinch
- Power: 12
from ASCO
The Series 384 are 3-way, universal, solenoid operated pinch. valves designed to control the flow of corrosive or high. purity fluids in medical equipment, analytical instruments,. and industrial applications. Pinch valves control fluid flow by. locating soft tubing in a mechanism that... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 15.00
- Valve Size: 0.040 to 0.085
- Number of Ports: 3
from Clark Solutions
Model EPK pinch valves are large, rugged pinch valves for use with 10 mm and 15 mm I.D. silicone tubing. The valves are particularly well suited for on/off fluid control applications where the fluid media is difficult for conventional valves to handle or where the complete fluid system wetted... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 7.25
- Valve Size: 0.394 to 0.591
- Number of Ports: 1
from Acro Associates, Inc.
Precision performance and reliability. Up to 30 milli second actuation times between states and high hundreds of thousands to million cycle rates. Flexibility in tubing selection – supports tubing ranges from 0.125" – 0.375" and up to 70 Durometer Shore A flexible tubing. Built in,... [See More]
- Valve Type: Single Solenoid; Pinch
- Number of Ports: 2
- Valve Size: 0.125 to 0.250
- Power: 12 to 48
from A. u. K. Müller GmbH & Co. KG
The 16.002.116 pinch valve series is normally closed in operation and is designed for flexible tubes up to an outer diameter of 3,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.079
- Number of Ports: 2
from NResearch
Suitable for applications where fluid must be isolated from the valve parts. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with one foot of silicone tubing standard, sizes listed below are standard. Consult factory for use with... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.030
- Number of Ports: 2
from Cole-Parmer
2-way normally closed [See More]
- Valve Type: Pinch
- Power: 12
- Maximum Pressure: 15.00
from Clark Solutions
Model PS pinch valve offers excellent reliability in a compact, versatile design. Reasonable cost and consistent performance are accomplished through molding and automated assembly technology. Model PS is available in three way (dual tube), two way normally open (single tube) or two way normally... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 21.76
- Valve Size: 0.126 to 1.600
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
The 16.003.125 pinch valve series is normally closed in operation and is designed for flexible tubes up to an outer diameter of 5,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.118
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of two streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with one two one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.030
- Number of Ports: 4
from Cole-Parmer
Solenoid Electric Valves (actuated) [See More]
- Valve Type: Pinch
- Power: 12
from Clark Solutions
Model PK pinch valves are rugged pinch valves for use with 1.6, 3.2 and 4.8 mm I.D. Silicone tubing. The valves are particularly well suited for on/off fluid control applications where the fluid media is difficult for conventional valves to handle or where the complete fluid system wetted components... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 7.25
- Valve Size: 0.189 to 0.378
- Number of Ports: 1
from A. u. K. Müller GmbH & Co. KG
The 16.006.130 pinch valve series is normally closed in operation and is designed for flexible tubes up to an outer diameter of 9,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 11.60
- Valve Size: 0.236
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of two NC streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with two one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Single Solenoid; Diverter; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.031
- Number of Ports: 4
from Cole-Parmer
Solenoid Electric Valves (actuated) [See More]
- Valve Type: Pinch
- Power: 12
from Clark Solutions
Model PM pinch valve offers excellent reliability in a compact, versatile design. Reasonable cost and consistent performance are accomplished through molding and automated assembly technology. Each model can be configured for three way (dual tube), two way normally open (single tube) or two way... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 21.76
- Valve Size: 0.094 to 0.118
- Number of Ports: 2
from A. u. K. Müller GmbH & Co. KG
The 16.001.216 pinch valve series is normally open in operation and is designed for flexible tubes up to an outer diameter of 2,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.039
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of two NO streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with two one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Single Solenoid; Diverter; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.031
- Number of Ports: 4
from Cole-Parmer
Solenoid Electric Valves (actuated) [See More]
- Valve Type: Pinch
- Power: 24
from A. u. K. Müller GmbH & Co. KG
The 16.002.216 pinch valve series is normally open in operation and is designed for flexible tubes up to an outer diameter of 3,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.079
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of four streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with four one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.031
- Number of Ports: 8
from Cole-Parmer
Solenoid Electric Valves (actuated) [See More]
- Valve Type: Pinch
- Power: 12
from A. u. K. Müller GmbH & Co. KG
The 16.003.225 pinch valve series is normally open in operation and is designed for flexible tubes up to an outer diameter of 5,2 mm and a shore hardness of 50 - 60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.118
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of four streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with four one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Single Solenoid; Diverter; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.031
- Number of Ports: 8
from Cole-Parmer
<b >What's included: </b > two 6" lengths of tubing sections with a "Y" connector. Additional tubing sold separately. All valves have 15" 26-gauge PTFE coated lead wires. [See More]
- Valve Type: Pinch
- Power: 12
- Maximum Pressure: 15.00
from A. u. K. Müller GmbH & Co. KG
The 16.006.230 pinch valve series is normally open in operation and is designed for flexible tubes up to an outer diameter of 9,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 11.60
- Valve Size: 0.236
- Number of Ports: 2
from NResearch
Suitable for pinch applications that require synchronous switching of four streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with four one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.062
- Number of Ports: 8
from Cole-Parmer
Solenoid Electric Valves (actuated) [See More]
- Valve Type: Pinch
- Power: 12
- Maximum Pressure: 15.00
from A. u. K. Müller GmbH & Co. KG
The 3/2-way pinch valves of series 16.001.316 are designed for flexible tubes up to an outer diameter of 2,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane which can cause... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.039
- Number of Ports: 2 to 3
from NResearch
Suitable for pinch applications that require synchronous switching of eight streams. The tubing can be easily changed. The valves are commonly available in 12vdc, 24vdc and 115vdc. Valves are supplied with eight one foot sections of silicone tubing standard, sizes listed below are standard. Consult... [See More]
- Valve Type: Single Solenoid; Pinch
- Maximum Pressure: 30.00
- Valve Size: 0.031
- Number of Ports: 16
from Cole-Parmer
<b >What's included: </b >12" length of silicone tubing. Additional tubing sold separately. All valves have 15" 26-gauge PTFE coated lead wires. [See More]
- Valve Type: Pinch
- Power: 12
- Maximum Pressure: 15.00
from A. u. K. Müller GmbH & Co. KG
The 3/2-way pinch valves of series 16.002.316 are designed for flexible tubes up to an outer diameter of 3,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane which can cause... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 14.50
- Valve Size: 0.079
- Number of Ports: 2 to 3
from A. u. K. Müller GmbH & Co. KG
The 3/2-way pinch valves of series 16.006.330 are designed for flexible tubes up to an outer diameter of 9,2 mm and a shore hardness of 50-60. The flow of the medium is controlled by pinching the inserted tube. This design avoids using the traditional valve seat and membrane which can cause... [See More]
- Valve Type: Pinch
- Maximum Pressure: 0.00 to 11.60
- Valve Size: 0.236
- Number of Ports: 2 to 3