DC Current Signal Converters
from Electro Optical Components, Inc.
PAb preamplifier is oriented for amplification and conversion of the pulse current signal generated by LMSNT photodiodes (PDs). Preamplifier enables PD operation at photovoltaic mode (with no reverse bias) – mode in which photodiode becomes the source of photocurrent. PD photocurrent is... [See More]
- Signal Converter Type: Current-to-Voltage Converter
- Inputs: Photodiode
- Form Factor: PC Board
- Outputs: Analog Voltage Output
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B32 module isolates, filters, and amplifies a process current input signal and provides an analog voltage output. Current to voltage conversion is... [See More]
- Signal Converter Type: Current-to-Voltage Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Accuracy: 0.0500
from ifm efector inc.
Reliable signal conversion of analog measured values in IO-Link. Learn more. View other products in this family of IO-Link masters. From May 1st 2025, products produced in EU and Singapore have an import surcharge reflected in the price. [See More]
- DC Current: 200
- Operating Temperature: -13 to 158
- Agency Approval: CE
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B42 module provides power to a current transmitter, then isolates, filters, and amplifies the resulting process current input signal and provides an... [See More]
- Signal Converter Type: Current-to-Voltage Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Accuracy: 0.0500
from Dataforth Corporation
Each DSCA32 current input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level voltage output. Signal filtering is accomplished with a five-pole filter which which is optimized for step response. An anti-aliasing pole is located on... [See More]
- Signal Converter Type: Current-to-Voltage Converter; Current Loop Converter
- Channels: 1
- Form Factor: DIN Rail
- Differential Channels: Yes
from Dataforth Corporation
Each DSCL20 loop powered isolator provides a single channel of analog signal protection by electrically isolating its input from output for any DC process signal in the range of 0-20mA (or 4-20mA). The DSCL20 operates passively, obtaining its power from t [See More]
- Signal Converter Type: Current Loop Converter
- Accuracy: 0.0500
- Form Factor: PC Board (optional feature); Panel / Chassis Mount (optional feature); DIN Rail (optional feature)
- Features: SigIsol
from Dataforth Corporation
Each DSCL21 loop powered isolator provides a single channel of analog signal protection by electrically isolating its input from output for any DC process signal in the range of 0-20mA (or 4-20mA). The DSCL21 operates passively, obtaining its power from the transmitted signal. The input signal is... [See More]
- Signal Converter Type: Current-to-Voltage Converter; Current Loop Converter
- Accuracy: 0.1000
- Form Factor: DIN Rail
- Features: SigIsol
from Dataforth Corporation
Each DSCT32 current input transmitter provides a single channel of analog input which is filtered, isolated, amplified, and converted to a process current output. Signal filtering is accomplished with a five-pole filter, which provides 80dB per decade of normal-mode rejection above 100Hz. An... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 1
- Form Factor: DIN Rail
- Differential Channels: Yes
from Dataforth Corporation
Each SCM5B32 current input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output (Figure 1). This voltage output is logic switch controlled, which allows these modules to share a common analog bus without the... [See More]
- Signal Converter Type: Current-to-Voltage Converter
- Channels: 1
- Form Factor: Rack Mount; DIN Rail
- Differential Channels: Yes
from Dataforth Corporation
The SCM7B32 current input modules accept input signals in the 4-20mA or 0- 20mA ranges from the field and provide a high-level output to the process control system. Current to voltage conversion occurs internal to the module, which is factory calibrated to ensure the highest accuracy. SCM7B33... [See More]
- Signal Converter Type: Voltage Converter; Current-to-Voltage Converter
- Channels: 1
- Form Factor: Rack Mount; DIN Rail
- Differential Channels: Yes
from Artifex Engineering
The TZA series of amplifiers employs precision differential or single ended transimpedance input stages to provide for low offset and high linearity throughout the full dynamic range. The single ended input stage is required for applications where the current source is inherently grounded... [See More]
- Signal Converter Type: Current-to-Voltage Converter; High Speed Transimpedance Amplifier
- DC Current: 4.5 mA
- Form Factor: Panel / Chassis Mount
- Outputs: Analog Voltage Output
from Hymark/Kentucky Gauge
The AWA analog input module can be used with all CamCon controllers. The AWA module comes with either two separate voltage or current inputs with 12 bit resolution. The AWA module can be connected to the CamCon controller either via expansion interface or via SSI Encoder interface. [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Resolution: 12
- Channels: 2
- DC Voltage: 0 to +10V, -10V to +10V
from Apix, Inc.
DESCRIPTION. The ISODAQ SPi Series Input Modules feature 8 independent channels and an SPi interface. They are fully isolated with. 3000 Vrms between Input, Power, SPi serial link and 2000 Vrms Channel-to-Channel. These ar [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: Module
- Resolution: 16
from OMEGA Engineering, Inc.
The OME-A-822PGH/L are 12-bit multifunction analog and digital I/O boards for PC/AT compatible computers. The OME-A-822PGH/L offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bit resolution. In addition,the OME-A-822PGH/PGL has 16 digital inputs, 16... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Channels: 16
- Resolution: 12
from WINSYSTEMS, INC.
WinSystems ’ IO60-M410 is a reliable data acquisition module for embedded systems with IO60 expansion featuring 24 GPIO (General Purpose Input-Output) tolerant to 30 V DC. Activity LEDs indicate device communication and DAC fault. WinSystems can provide custom configurations for OEM clients. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- DC Voltage: 0-5V, 0-10V, ±5V, and ±10
- Form Factor: PC Board
- DC Current: Jumper Selectable Conversion for 4 mA to 20 mA Current Loop
from Acromag, Inc.
4 to 20mA DC input. 4 to 20mA DC output. 15-36V DC SELV, 90-250V AC power. Single or dual I/O with a dual output model and full isolation. These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 1
- Form Factor: Rack Mount (optional feature); DIN Rail
- Differential Channels: Yes
from American Portwell Technology Inc.
High-speed 250kHz 12-bit A/D for 16 single-ended and 8 differential inputs from any computer with a USB 2.0 port. PC/104 sized board and mounting holes installed in a small rugged enclosure with SCSI connectior for Data Acquisiion and digital control. The unit has software autocalibration, 16... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Stand-alone
- Differential Channels: Yes
from Electro-Sensors, Inc.
Analog to Frequency Conversion Module. Features. • 0-10 VDC and 4-20 mA inputs. • 0-20 Khz output switch selectable. • Inversely proportional output available. • NPN open collector or driven output. • 0.05% linearity. • Offset and gain adjustments. The AIFO-200 is an... [See More]
- Signal Converter Type: Voltage-to-Frequency Converter
- Channels: 1
- Form Factor: PC Board; Rack Mount (optional feature)
- DC Voltage: 0-10Vdc
from Define Instruments
This versatile 2-wire transmitter accepts a range of standard input types, and outputs a 4-20mA loop. USB programming is hassle free, and takes less than a minute using Define ToolBox. 2-wire universal transmitter (DIN-mount, isolated). Current, voltage, thermocouple, RTD and potentiometer input. [See More]
- Signal Converter Type: Current Loop Converter
- DC Voltage: 100mV to ±10V
- Form Factor: DIN Rail
- DC Current: 1µA–24mA
from SPECTEC
Frequency divider signal converter that conditions and scales output [See More]
- Signal Converter Type: Frequency Converters
- DC Voltage: 8.5-30 VDC
- Form Factor: Stand-alone
- DC Current: 18mA
from Montalvo Corporation
Montalvo electro-pneumatic converters provides accurate, dependable conversion of a DC current signal into a proportional pneumatic output. They are used in conjunction with a Tension Controller to control a pneumatic brake. Features: Performance. Rapid Response Rate. High flow rate provides the... [See More]
- Signal Converter Type: DC to Pneumatic
- DC Current: 4-20ma
- Form Factor: Panel / Chassis Mount
- Inputs: Charge Input
from ifm electronic gmbh
compact design with high protection rating for use in wet environments. Reliable signal conversion of analogue measured values in IO-Link [See More]
- DC Current: 200
- Operating Temperature: -13 to 158
- Agency Approval: CE
from Columbia Research Labs, Inc.
Columbia Model 5840 Differential Charge Amplifier has been specifically designed to operate with differential output piezoelectric vibration sensors typically used in aircraft engine condition monitoring systems. It features small package size and extremely low power consumption. The Model 5840... [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Panel / Chassis Mount
- Differential Channels: Yes
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-203 Bluetooth to CAN converter can build bidirectional communication between mobile device(phone/Pad) and CAN bus. The user can receive and send CAN data on phone wirelessly. Features. CAN-Bus baud rates range from 5Kbps to 1Mbps;. CAN-Bus isolation module insulation voltage: DC 1500V;. [See More]
- Form Factor: DIN Rail
- DC Current: 20mA, 24V DC
- DC Voltage: 9~30V DC
- Network Options: CANbus
from Honeywell Analytics, Inc.
The 420I communicates digitally with Vulcain transmitters within a true daisy chain network, converting the transmitters ’ digital signals to analog outputs. This allows each transmitter to provide a 4-20mA signal to a BMS from one central location. The unit can accommodate up to eight... [See More]
- Signal Converter Type: Digital-to-Analog Converter
- DC Current: 4-20 mA
- Form Factor: Panel / Chassis Mount
- Outputs: Analog Current Output
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-AI-2AO-S - 1176020000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-AI-2AO-S - 1176020000 takes current signals of 0-10 V DC, 0-5 V DC, 0-20 mA, and 4-20 mA. It then... [See More]
- DC Voltage: 0-5/10 V DC/ 0/4-20 mA
- AC Current: 0-5/10 V DC/ 0/4-20 mA
- DC Current: 0-5/10 V DC/ 0/4-20 mA
- Excitation: Current
from Hymark/Kentucky Gauge
Conversion interface for absolute encoders. From SSI to Bit parallel. DIN rail mounting [See More]
- Signal Converter Type: SSI to Bit parallel
- DC Voltage: 18-30 Vdc
- Form Factor: DIN Rail
- DC Current: 200 mA
from Apix, Inc.
Model DAQ8-20mA4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version Current Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: DIN Rail
- Resolution: 16
from OMEGA Engineering, Inc.
The OME-A-826PG is a 16-bit multifunction analog and digital I/O board for PC/AT compatible computers. The OME-A-826PG offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bits resolution. In addition, the OME-A-826PG has 16 digital inputs, 16 digital... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Channels: 16
- Resolution: 16
from Acromag, Inc.
4 to 20mA DC input. 4 to 20mA DC output. Input loop powered. Low-cost isolator. Up to four independent channels in a single unit with channel-to-channel isolation. These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Power is derived from the input signal... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 1
- Form Factor: Rack Mount (optional feature); DIN Rail
- Differential Channels: Yes
from American Portwell Technology Inc.
High-speed 500kHz 12-bit A/D for 16 single-ended and 8 differential inputs from any computer with a USB 2.0 port. PC/104 sized board and mounting holes installed in a small rugged enclosure with SCSI connectior for Data Acquisiion and digital control. The unit has real-time autocalibration, 16... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Stand-alone
- Differential Channels: Yes
from Define Instruments
What it does: The TM-4DPI accepts one of several input signal types and generates one of four commonly required outputs: 4-20mA, 0-20mA, 0-10V, &plusm;10V. The TM-4DPI is designed for applications that have an auxiliary supply to power the transmitter. It can be powered directly from a 24V DC... [See More]
- Signal Converter Type: Current Loop Converter
- DC Voltage: 100mV to ±10V
- Form Factor: DIN Rail
- DC Current: 1µA–24mA
from Montalvo Corporation
Montalvo electro-pneumatic converters provides accurate, dependable conversion of a DC current signal into a proportional pneumatic output. They are used in conjunction with a Tension Controller to control a pneumatic brake. Features: Performance. Rapid Response Rate. High flow rate provides the... [See More]
- Signal Converter Type: DC to Pneumatic
- DC Current: 4-20ma
- Form Factor: Panel / Chassis Mount
- Inputs: Charge Input
from Columbia Research Labs, Inc.
The Columbia Model 5804 Military-Grade Strain Gage Amplifier is designed to amplify signals from Columbia's DT and DTD Series Full-Bridge Strain Sensors. The system will provide both strain and temperature outputs. The strain output incorporates a microprocessor-driven auto zeroing circuit capable... [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Panel / Chassis Mount
- DC Current: 15-35 Volts
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-208 optical fiber to CAN converter can convert CAN bus signals to optical signal. The conversion time between CAN data and optical signals is microsecond, ensuring the real-time communication. The GCAN-208 supports any CAN bus communication protocol such as CANopen, SAE J1939, DeviceNet,... [See More]
- DC Voltage: 9~30V DC
- Network Options: CANbus
- DC Current: 20mA, 24V DC
- Operating Temperature: -40 to 185
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-AI-AO-E-S - 1176010000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-AI-AO-E-S - 1176010000 takes current signals of 0-10 V DC, 0-5 V DC, 0-20 mA, and 4-20 mA. It then... [See More]
- DC Voltage: 0-5/10 V DC/ 0/4-20 mA
- AC Current: 0-5/10 V DC/ 0/4-20 mA
- DC Current: 0-5/10 V DC/ 0/4-20 mA
- Excitation: Current
from OMEGA Engineering, Inc.
The DRA-RTM-8 is a 16 channel analog multiplexer. Eight channels accept 3-wire 100 Ohm Pt RTD inputs, and the other eight channels accept 4-20 mA process inputs. All 16 inputs are multiplexed into a single 4-20 mA current loop output. The selection function is performed via four binary control lines... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 16
- Form Factor: DIN Rail
- Accuracy: 0.1000
from Acromag, Inc.
plusmn;100V DC, 0 to 100mA DC, 0 to 20A AC (with optional sensor) input. 0 to 20mA, 0 to 10V DC output. 10-36V DC power. Universal DC I/O transmitters with auto-configuration and self-ranging capabilities. These units receive DC current or voltage input signals, provide isolation, and output... [See More]
- Signal Converter Type: Current Loop Converter; Transmitter
- Channels: 1
- Form Factor: Rack Mount (optional feature); DIN Rail
- Differential Channels: Yes
from American Portwell Technology Inc.
Economical 100kHz 12-bit A/D for 16 single-ended and 8 differential inputs from any computer with a USB 2.0 port. PC/104 sized board and mounting holes installed in a small rugged enclosure with SCSI connectior for Data Acquisiion and digital control. The unit has manual calibration, 16 high-current... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Stand-alone
- Differential Channels: Yes
from Columbia Research Labs, Inc.
The Columbia Model 5648-X Single Channel Power Supply / Signal Conditioner provides a ruggedized unity gain interface between Columbia's 8000 or 900 Series Sensors or any competitors Acceleration, Pressure or Acoustic Sensors ith built in constant current powered electronics. The 5648-X provides a... [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Panel / Chassis Mount
- DC Current: 16-32 Volts
from Shenyang Vhandy Technology Co., Ltd.
GCAN-207 can realize bidirectional communication between RS232 or RS485 bus and CAN bus. It can make RS232 or RS485 devices connected to CAN bus or connect a host PLC/HMI Display into a CAN Bus network. GCAN-207 has intergrated isolation module on each interface and DIN rail to install. Application:... [See More]
- Form Factor: DIN Rail
- DC Current: 20mA, 24V DC
- DC Voltage: 9~30V DC
- Network Options: CANbus
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-AI-AO-S - 1176000000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-AI-AO-S - 1176000000 takes current signals of 0-10 V DC, 0-5 V DC, 0-20 mA, and 4-20 mA. It then... [See More]
- DC Voltage: 0-5/10 V DC/ 0/4-20 mA
- AC Current: 0-5/10 V DC/ 0/4-20 mA
- DC Current: 0-5/10 V DC/ 0/4-20 mA
- Excitation: Current
from OMEGA Engineering, Inc.
The D5000 Four Channel Sensor to Computer Modules are a family of complete solutions designed for data acquisition systems based on personal computers and other processor-based equipment with standard serial I/O ports. The modules convert four analog input signals to engineering units and transmit... [See More]
- Form Factor: Screw Mount
- Resolution: 15
- Channels: 1
- Accuracy: 0.0200
from Acromag, Inc.
4 to 20mA DC input. 4 to 20mA DC output. 12-50V DC power from output loop. Low cost isolator. These units receive 4-20mA process current inputs and provide isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels. For... [See More]
- Signal Converter Type: Current Loop Converter; Transmitter
- Channels: 1
- Form Factor: Rack Mount (optional feature); DIN Rail
- Differential Channels: Yes
from American Portwell Technology Inc.
High-speed 500kHz 16-bit A/D for 16 single-ended and 8 differential inputs from any computer with a USB 2.0 port. PC/104 sized board and mounting holes installed in a small rugged enclosure with SCSI connectior for Data Acquisiion and digital control. The unit has real-time autocalibration, 16... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Stand-alone
- Differential Channels: Yes
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-211 WiFi to CAN converter has integrated 2 CAN interface, 1 Ethernet interface and 1 WiFi interface. PC, mobile phone, Pad can connect to CAN bus network with this module. It can also be used in pairs as wireless CAN bus repeater. It supports software development and we provide the... [See More]
- DC Voltage: 9~30V(50mA, 24V DC);
- Network Options: CANbus
- DC Current: 20mA, 24V DC
- Operating Temperature: -40 to 185
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-CI-2CO-S - 1175990000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-CI-2CO-S - 1175990000 takes current signals of 0/4-20 mA. It then isolates, duplicates, and conditions... [See More]
- DC Current: 0/4-20 mA
- Excitation: Current
- AC Current: 0/4-20 mA
- Outputs: Analog Current Output
from OMEGA Engineering, Inc.
The iNET-400 system is a low cost card cage that attaches to Windows computers via USB 2.0. The advantage of a card cage is that you can select which I/O modules to install as needed to build a customized system. The instruNet card cage typically has one A/D measurement module and additional modules... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: PC Board; Modular Bay or Slot System
- Differential Channels: Yes
from Acromag, Inc.
i2o Option. 18 to 36V DC Power. Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability. These modules interface high-level analog input signals to an Ethernet network. A high-performance design ensures reliable measurements and dependable operation. Industrial-grade models add a... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: Stand-alone
- Differential Channels: Yes
from American Portwell Technology Inc.
Economical High-speed 250kHz 16-bit A/D for 16 single-ended and 8 differential inputs from any computer with a USB 2.0 port. PC/104 sized board and mounting holes installed in a small rugged enclosure with SCSI connectior for Data Acquisiion and digital control. The unit has software... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Stand-alone
- Differential Channels: Yes
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail. The GCAN-204... [See More]
- Form Factor: DIN Rail
- DC Current: 20mA, 24V DC
- DC Voltage: 9~30V (20mA,24V DC);
- Network Options: CANbus
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-CI-CO-ILP-S - 1176070000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-CI-CO-ILP-S - 1176070000 takes 2-wire loop power signals of current signals of 0/4-20 mA. It then... [See More]
- DC Current: 0/4-20 mA (2-wire loop)
- Excitation: Current
- AC Current: 0/4-20 mA (2-wire loop)
- Outputs: Analog Current Output
from OMEGA Engineering, Inc.
The DRA-MDM-11 is a mux/demux system which transfers analog information accurately via a single pair of wires. The multiplexer unit (DRA-M-11) accepts up to sixteen 4-20 mA process current inputs. The multiplexed inputs are transferred to the demultiplexer unit (DRA-DM-11) at a scan rate of up to... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 16
- Form Factor: DIN Rail
- DC Current: 4-20 mA
from Acromag, Inc.
913MB: 4 current input channels. 914MB: 4 voltage input channels. 4 input channels. 0 to 20mA DC (0 to 20A AC with AC sensor) or ±10V DC input range. 4 alarm channels, open drain MOSFETS (1A DC loads, 0 to 35V DC). 10 to 36V DC, 24V AC power. Modbus RTU high-speed RS-485. This signal... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 4
- Form Factor: DIN Rail
- Differential Channels: Yes
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-205 is a CAN to Modbus TCP Slave Converter with one Ethernet interface and one CAN interface. It allows user to connect some ModTCP Master with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail. The GCAN-205 converter is a standard... [See More]
- Form Factor: DIN Rail
- Network Options: CANbus
- DC Current: 20mA, 24V DC
- Operating Temperature: -40 to 185
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-CI-CO-S - 1175980000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-CI-CO-S - 1175980000 takes current signals of 0/4-20 mA. It then isolates and conditions it into the... [See More]
- DC Current: 0/4-20 mA
- Excitation: Current
- AC Current: 0/4-20 mA
- Outputs: Analog Current Output
from OMEGA Engineering, Inc.
The DRP-8500 Series modules offer a low cost analog I/O solution for micro PLCs. The series is ideal for discrete automation applications requiring one or two analog I/O channels. All models in the series interface with the PLC high speed counter inputs or pulse outputs. Digital signal pulse-width... [See More]
- Signal Converter Type: Voltage-to-Frequency Converter; Analog to Hz
- DC Voltage: 0-10 V
- Form Factor: DIN Rail
- DC Current: 4-20 mA
from Acromag, Inc.
plusmn;20mA, 0-20mA, 4-20mA DC Input (selectable on each channel). 18 to 36V DC. Modbus TCP/IP, 10/100 Base-T(X);. These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation. [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: DIN Rail
- Differential Channels: Yes
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20P-2CI-2CO-12 - 7760054117, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20P-2CI-2CO-12 - 7760054117 takes two current signals of 0/4-20 mA and HART protocol signals. It then... [See More]
- DC Current: 2 x 0/4-20 mA / HART signal
- Excitation: Current
- AC Current: 2 x 0/4-20 mA / HART signal
- Outputs: Analog Current Output
from OMEGA Engineering, Inc.
OMEGA ® high accuracy integral signal conditioners are designed for direct mounting onto OMEGA FTB-100 and 200 Series turbine meters. The input circuitry of the signal conditioners has been designed to receive and condition low level turbine meter signals while rejecting unwanted noise and... [See More]
- Signal Converter Type: Frequency Converters
- Accuracy: 0.0500
- Form Factor: Panel / Chassis Mount
- DC Voltage: 120V RMS Max
from Acromag, Inc.
i2o Option. 6 input channels, 0 to 20mA in 3 selectable ranges (0 to 20 amps AC with optimal AC sensor) or ±78mV to ±10V DC with eight range options. 15 to 36V DC Power. EtherNet/IP ® or Ethernet Modbus TCP/IP 10/100Mbps network, i2o input-to-output capability. These modules... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 6
- Form Factor: DIN Rail
- Differential Channels: Yes
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20P-CI-2CO - 7760054115, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20P-CI-CO - 7760054114 takes current signals of 0/4-20 mA and HART protocol signals. It then isolates,... [See More]
- DC Current: 0/4-20 mA / HART signal
- Excitation: Current
- AC Current: 0/4-20 mA / HART signal
- Outputs: Analog Current Output