DC Voltage Signal Converters
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B30 or 8B31 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. Signal filtering is accomplished with a... [See More]
- Signal Converter Type: Voltage Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Altech Corp.
Solid State I/O Modules are used to switch both AC and DC loads as well as sensing AC or DC control voltages for controlling the input to a PLC. The input is isolated from the output via an optically coupled circuit in the device itself. Since there are no moving parts, the device will have a... [See More]
- Signal Converter Type: Voltage Converter
- DC Voltage: 5 VDC
- Form Factor: Modular Bay or Slot System
- Outputs: Analog Voltage Output
from Rotork plc
Module with intrinsically safe circuit to change a passive sensor signal (e.g. PT100) into an active mA/V signal. Module must be installed in the safe area, sensor in the hazardous location. [See More]
- Form Factor: DIN Rail
- Inputs: RTD Input
- DC Voltage: 24 V DC
- Outputs: Analog Current Output
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B30 or 8B31 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. Signal filtering is accomplished with a... [See More]
- Signal Converter Type: Voltage Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B39 module accepts an input signal from a non-isolated source, then isolates, filters, and converts the signal to an analog process current output. Signal... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B40 or 8B41 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. Signal filtering is accomplished with a... [See More]
- Signal Converter Type: Voltage Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B49 module accepts an input signal from a non-isolated source, then isolates, filters and converts the signal to a high-level process voltage output. [See More]
- Signal Converter Type: Voltage Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Dataforth Corporation
8B modules are an optimal solution for monitoring real-world process signals and providing high-level signals to a data acquisition system. Each 8B50 or 8B51 module isolates, filters, and amplifies a voltage input signal and provides an analog voltage output. Signal filtering is accomplished with a... [See More]
- Signal Converter Type: Voltage Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Dataforth Corporation
Each DSCA30/31 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level voltage output. Signal filtering is accomplished with a five-pole filter which provides 85dB of normal-mode rejection at 60Hz and 80dB at 50Hz. An... [See More]
- Signal Converter Type: Voltage Converter; Current Loop Converter
- Channels: 1
- Form Factor: DIN Rail
- Differential Channels: Yes
from Dataforth Corporation
Each DSCT30 and DSCT31 voltage input transmitter provides a single channel of analog input which is filtered, isolated, amplified, and converted to a process current output. Signal filtering is accomplished with a five-pole filter, which provides 85dB of normal-mode rejection at 60Hz and 80dB at... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 1
- Form Factor: DIN Rail
- Differential Channels: Yes
from Dataforth Corporation
Each SCM5B30 and SCM5B31 voltage input module provides a single channel of analog input which is filtered, isolated, amplified, and converted to a high-level analog voltage output (Figure 1). This voltage output is logic-switch controlled, allowing these modules to share a common analog bus without... [See More]
- Signal Converter Type: Voltage Converter
- Channels: 1
- Form Factor: Rack Mount; DIN Rail
- Differential Channels: Yes
from Dataforth Corporation
Each SCM7B21/30/31 voltage input module accepts one channel of analog voltage input which is filtered, isolated, amplified, and converted to a high-level analog voltage for output to the process control system. These modules incorporate a five-pole filtering approach to maximize both time and... [See More]
- Signal Converter Type: Voltage Converter
- Channels: 1
- Form Factor: Rack Mount; DIN Rail
- Differential Channels: Yes
from Dataforth Corporation
The SCM9B-1000/2000 Sensor-to-Computer Modules are a family of complete solutions designed for data acquisition systems based on personal computers and other processor-based equipment with standard serial I/O ports. The modules convert analog input signals to engineering units and transmit in ASCII... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 1
- Form Factor: Panel / Chassis Mount
- Differential Channels: Yes
from Dataforth Corporation
The 8B isoLynx ® SLX300 - Dataforth's newly introduced data acquisition system - builds on the proven reliability and outstanding performance of the SCM5B isoLynx ® SLX200 and the miniature-sized SensorLex ® 8B isolated signal conditioning modules to provide a compact, low cost solution... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 12
- Form Factor: PC Board; Panel / Chassis Mount (optional feature); DIN Rail (optional feature)
- Accuracy: 0.0700
from D-TACQ Solutions
The ACQ216CPCI board represents the first in a new generation of intelligent high performance Analog Data Acquisition products from D-TACQ Solutions Ltd. The board samples 16 input channels simultaneously with 14 bit resolution at speeds up to 50 MSPS (mega-samples per second) and offers excellent... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: PC Board
- Differential Channels: Yes
from Data Device Corporation (DDC)
DDC's USB device provides new levels of performance and flexibility for interfacing laptops to Synchro/Resolver systems designed for modern, high performance industrial and military position feedback, and control and test systems. BENEFITS. Fast and Easy Lab Connections. Quick Connect Wire Insertion... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; S/R Interface
- Channels: 2
- Form Factor: Stand-alone
- Resolution: 16
from OTEK Corporation
The SCT has an integral 5-28VDC / DC to DC converter. The 4-20mA transmitter accepts 0-1 VDC full scale signal from your sensor convert it to a 4-20mA process signal. The unit is ideal for logic power 5V systems where 24V is not available. Its high efficiency DC-DC converter requires ~ 170mA when... [See More]
- Signal Converter Type: Voltage-to-Frequency Converter
- DC Voltage: 5VDC +/- 10% Power Input
- Form Factor: PC Board
- AC Voltage: 0-130VAC
from Electro-Sensors, Inc.
Analog to Frequency Conversion Module. Features. • 0-10 VDC and 4-20 mA inputs. • 0-20 Khz output switch selectable. • Inversely proportional output available. • NPN open collector or driven output. • 0.05% linearity. • Offset and gain adjustments. The AIFO-200 is an... [See More]
- Signal Converter Type: Voltage-to-Frequency Converter
- Channels: 1
- Form Factor: PC Board; Rack Mount (optional feature)
- DC Voltage: 0-10Vdc
from Acromag, Inc.
plusmn;100V DC, 0 to 100mA DC, 0 to 20A AC (with optional sensor) input. 0 to 20mA, 0 to 10V DC output. 10-36V DC power. Universal DC I/O transmitters with auto-configuration and self-ranging capabilities. These units receive DC current or voltage input signals, provide isolation, and output... [See More]
- Signal Converter Type: Current Loop Converter; Transmitter
- Channels: 1
- Form Factor: Rack Mount (optional feature); DIN Rail
- Differential Channels: Yes
from PCB Piezotronics, Inc.
In-line charge converter, 10 mV/pC, +/-2.5V output, -5% frequency 5 Hz [See More]
- Signal Converter Type: Charge Converter
- Outputs: Analog Voltage Output
- DC Voltage: 30 V
- Operating Temperature: -65 to 250
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-AI-2AO-S - 1176020000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-AI-2AO-S - 1176020000 takes current signals of 0-10 V DC, 0-5 V DC, 0-20 mA, and 4-20 mA. It then... [See More]
- DC Voltage: 0-5/10 V DC/ 0/4-20 mA
- AC Current: 0-5/10 V DC/ 0/4-20 mA
- DC Current: 0-5/10 V DC/ 0/4-20 mA
- Excitation: Current
from Encore Electronics, Inc.
The Model FL228 is a wide band, analog frequency. to voltage converter. It is a no frills unit with fixed frequency range and noise discrimination level. Externally-accessible trimpot controls allow adjustment of output offset and fullscale voltage. The unit is mechanically and electrically... [See More]
- Signal Converter Type: Frequency-to-Voltage Converter
- DC Voltage: 0 To +/- 45 V Max
- Form Factor: DIN Rail
- Outputs: Analog Voltage Output
from Spectron Glass and Electronics Inc.
The SA40111 Ultra-Dual is a dual axis signal conditioner that delivers high accuracy RS232 (8 bit) and analog (Vdc) outputs. Designed to interface perfectly with Spectrons full line of single and dual axis electrolytic tilt sensors, the SA40111 Ultra-Dual is capable of providing data over widely... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Voltage Converter
- Channels: 1
- Form Factor: PC Board
- DC Voltage: 3V - 12V
from Electro Standards Laboratories
Model 5162 High Speed Fiber-to-USB Converter/Extender, Host, Desktop Configuration. Simultaneously connect up to four USB Interface Devices to your desktop PC or notebook. High speed connection to distant USB devices over multimode fiber optic cable. The desktop Model 5162 is a Host that works with... [See More]
- Signal Converter Type: Fiber to USB Converter
- DC Voltage: 5 VDC
- Form Factor: DIN Rail (optional feature); Desktop Unit
- User Interface: Computer Programmable
from Apix, Inc.
Model DAQ8-80mV41-SPi. ISODAQ SPi INTERFACE MODULE. The Daqpak SPi Series millivolt Input Modules feature 8 independent channels and an SPi interface. They are fully isolated with 3 KVrms between Input, Power, SPi serial link and 2 KVr [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: Module
- Resolution: 16
from American Portwell Technology Inc.
High precision analog input terminal for USB2.0 [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: Stand-alone
- Resolution: 16
from Hymark/Kentucky Gauge
The AWA analog input module can be used with all CamCon controllers. The AWA module comes with either two separate voltage or current inputs with 12 bit resolution. The AWA module can be connected to the CamCon controller either via expansion interface or via SSI Encoder interface. [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Resolution: 12
- Channels: 2
- DC Voltage: 0 to +10V, -10V to +10V
from KOBOLD Instruments, Inc.
The KOBOLD SCI Series frequency to current converter is a two-wire, loop-powered, frequency to analog converter that converts a pulse rate input to a 4 –20 mA output signal. The frequency to current converter accepts two forms of signal input: one for millivolt (magnetic pick-up) signals, and... [See More]
- Form Factor: Modular Bay or Slot System; DIN Rail
- Frequency: 0-10 kHz
- DC Voltage: 0-30 Volts
- Outputs: Analog Current Output
from RESON
The CCA 1000 is a compact low-noise conditioning charge amplifier designed for use with piezoelectric hydrophones and other piezoelectric detectors. The CCA 1000 enables the uses of long cables between hydrophone and amplifier without affecting the hydrophone sensitivity. The input capacitance can... [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Stand-alone
- DC Voltage: 12 to 24VDC
from WINSYSTEMS, INC.
WinSystems ’ IO60-M410 is a reliable data acquisition module for embedded systems with IO60 expansion featuring 24 GPIO (General Purpose Input-Output) tolerant to 30 V DC. Activity LEDs indicate device communication and DAC fault. WinSystems can provide custom configurations for OEM clients. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- DC Voltage: 0-5V, 0-10V, ±5V, and ±10
- Form Factor: PC Board
- DC Current: Jumper Selectable Conversion for 4 mA to 20 mA Current Loop
from Thermotron Industries
The AVI (Analog Voltage Input) is an intelligent instrument which uses its own onboard processor to monitor voltages and compare them to high and low limits. This approach reduces software load on the external computer and allows high speed voltage monitoring and failure detection. AVI... [See More]
- Signal Converter Type: Digital-to-Analog Converter
- Channels: 32
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Define Instruments
This versatile 2-wire transmitter accepts a range of standard input types, and outputs a 4-20mA loop. USB programming is hassle free, and takes less than a minute using Define ToolBox. 2-wire universal transmitter (DIN-mount, isolated). Current, voltage, thermocouple, RTD and potentiometer input. [See More]
- Signal Converter Type: Current Loop Converter
- DC Voltage: 100mV to ±10V
- Form Factor: DIN Rail
- DC Current: 1µA–24mA
from FUTEK Advanced Sensor Technology, Inc.
USB210 , External USB Output Kit , 24 Bit Resolution , Up To 16 Bit Noise Free , Standard , For mV/V Inputs , Up to 1000 SPS [See More]
- Signal Converter Type: Analog-to-Digital Converter
- DC Voltage: 4.5
- Form Factor: USB Drive
- User Interface: None
from Microchip Technology, Inc.
The TC1047A is a linear output temperature sensor whose output voltage is directly proportional to measured temperature. The TC1047A can accurately measure temperature from -40C to +125C. For the TC1047A, the output voltage range is typically 100mV at -40C, 500mV at 0C, 750mV at +25C, and 1.75V at... [See More]
- Form Factor: ['DICE', 'WAFER', 'SOT-23']
- DC Voltage: 2.5 ~ 5.5
from Time Mark Corporation
Liquid level controllers generally require a 4-20mA loop current that represents zero to 34.6 feet. The loop current indicates the level of liquid in a tank or reservoir, and is usually generated by an expensive pressure transducer or ultrasonic sensor. If you already have a tank with float switches... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 6
- Form Factor: Panel / Chassis Mount
- DC Voltage: 15VDC
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-203 Bluetooth to CAN converter can build bidirectional communication between mobile device(phone/Pad) and CAN bus. The user can receive and send CAN data on phone wirelessly. Features. CAN-Bus baud rates range from 5Kbps to 1Mbps;. CAN-Bus isolation module insulation voltage: DC 1500V;. [See More]
- Form Factor: DIN Rail
- DC Current: 20mA, 24V DC
- DC Voltage: 9~30V DC
- Network Options: CANbus
from Kistler Group
The Kistler LabAmp Type 5165A... is not only an outstanding low-noise charge amplifier for dynamic signals but also a powerful data acquisition device delivering the digitized measurement values directly to a host computer for further analysis. It is configured and operated in a web-interface,... [See More]
- Signal Converter Type: Charge Converter
- Channels: 4
- Form Factor: Stand-alone
- Resolution: 24
from OMEGA Engineering, Inc.
The OME-A-822PGH/L are 12-bit multifunction analog and digital I/O boards for PC/AT compatible computers. The OME-A-822PGH/L offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bit resolution. In addition,the OME-A-822PGH/PGL has 16 digital inputs, 16... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Channels: 16
- Resolution: 12
from ACCES I/O Products, Inc.
Features. Eight single-ended or differential analog inputs. 12-bit resolution. Nine software programmable voltage ranges. Programmable scan rate. Foreground/background operation. Three 16-bit counter/timers for event counting, pulse and waveform generation, and frequency measurement. Seven bits of... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: PC Board
- Differential Channels: Yes
from Red Pitaya, d.o.o.
SDRlab 122-16 External clock is based on the SDRlab 122-16 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Campbell Scientific, Inc.
The AVW200 interface module applies a new method for measuring a sensor's frequency. The AVW200 eliminates the problem of incorrect readings due to noise sources. The noise problems are overcome by an advancement in technology and mathematical processing, resulting in frequency-based measurements... [See More]
- Signal Converter Type: Frequency Converters
- Differential Channels: Yes (optional feature)
- Form Factor: Panel / Chassis Mount
- Resolution: 24
from D-TACQ Solutions
14 bit ADC per channel for true simultaneous analog input. High throughput: 2MSPS/channel (32 channels), 4MSPS/channel (16 channels). continuous converted data transfer to local memory, or offboard via CPCI backplane. Oversampling options with filtered, decimated output: 8MSPS Input Sample Rate,... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 32
- Form Factor: PC Board
- Differential Channels: Yes
from Acromag, Inc.
TC (types J, K T, R, S, E, B, N), ±1V DC, selectable range/type input. 4 to 20mA DC output. 12-50V DC from output loop power. DIP-switch configuration, signal linearizer, push-button calibration. These units accept universal thermocouple and millivolt input signals, provide isolation, and... [See More]
- Signal Converter Type: Current Loop Converter; Transmitter
- Channels: 1
- Form Factor: Rack Mount (optional feature); DIN Rail
- Differential Channels: Yes
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-AI-AO-E-S - 1176010000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-AI-AO-E-S - 1176010000 takes current signals of 0-10 V DC, 0-5 V DC, 0-20 mA, and 4-20 mA. It then... [See More]
- DC Voltage: 0-5/10 V DC/ 0/4-20 mA
- AC Current: 0-5/10 V DC/ 0/4-20 mA
- DC Current: 0-5/10 V DC/ 0/4-20 mA
- Excitation: Current
from Encore Electronics, Inc.
The Model FL230 is a voltage-controlled oscillator, producing 0-5V output pulses at a frequency proportional to a voltage or current input signal. Accuracy is within ±0.25% from 5% to 110% fullscale input. For the FL230-005, the operating range is -0.6V to +3.4V, allowing operation at zero... [See More]
- Signal Converter Type: Voltage-to-Frequency Converter
- DC Voltage: 0-10 V
- Form Factor: DIN Rail
- Outputs: Frequency or Pulse Output
from Spectron Glass and Electronics Inc.
The SA40072 is a single channel signal conditioner, which provides a 4 to 20mA output. With the ability to interface directly with the complete line of Spectron single axis electrolytic tilt sensors (not included), the SA40072 is the perfect solution for narrow or wide angle measurements. The open... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 1
- Form Factor: PC Board
- DC Voltage: 14V - 24V
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. They are fully isolated with 3000 Vrms between Input, Power,. RS-485 ser [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 12
- Form Factor: DIN Rail
- Resolution: 16
from American Portwell Technology Inc.
Sixteen independent double-buffered, digital-to-analog converters (DACs), and three 16-bit counter/timers Analog Output Cards [See More]
- Signal Converter Type: Digital-to-Analog Converter
- Channels: 16
- Form Factor: PC Board
- Resolution: 12
from Hymark/Kentucky Gauge
Conversion interface for absolute encoders. From SSI to Bit parallel. DIN rail mounting [See More]
- Signal Converter Type: SSI to Bit parallel
- DC Voltage: 18-30 Vdc
- Form Factor: DIN Rail
- DC Current: 200 mA
from WINSYSTEMS, INC.
PC/104 Data Acquisition module incorporating 16 Analog-to-Digital (ADC) inputs, 8 Digital-to-Analog (DAC) outputs, and 48 bi-directional Digital I/O in a single module. Features. 16-bit Analog-to-Digital (ADC) converter with sample-and-hold circuit. Analog input ranges: 0-5V, 0-10V, ±5V and... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: PC Board
- DC Voltage: 0-5V, 0-10V, ±5V, and ±10
from Thermotron Industries
The AVIO (Analog Voltage Input/Output) Instrument features 16 channels, each configurable for either input or output. Output Mode Specifications. Number of Channels: 16 (user configurable to be either input or output). Maximum Frequency: 1 MS/s. Output Voltage Range: +10/-10 Volts. Output Mode... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Define Instruments
What it does: The TM-4DPI accepts one of several input signal types and generates one of four commonly required outputs: 4-20mA, 0-20mA, 0-10V, &plusm;10V. The TM-4DPI is designed for applications that have an auxiliary supply to power the transmitter. It can be powered directly from a 24V DC... [See More]
- Signal Converter Type: Current Loop Converter
- DC Voltage: 100mV to ±10V
- Form Factor: DIN Rail
- DC Current: 1µA–24mA
from FUTEK Advanced Sensor Technology, Inc.
USB220 , External USB Output Kit , 24 Bit Resolution , Up To 19 Bit Noise Free , Standard , For mV/V Inputs , Up to 4800 SPS [See More]
- Signal Converter Type: Analog-to-Digital Converter
- DC Voltage: 4.6
- Form Factor: USB Drive
- User Interface: None
from Microchip Technology, Inc.
The TC1046 is a linear output temperature sensor whose output voltage is directly proportional to measured temperature. The TC1046 can accurately measure temperature from -40C to +125C. The output voltage range for this device is typically 174 mV at -40C, 424 mV at 0C, 580 mV at +25C, and 1205 mV at... [See More]
- Form Factor: ['SOT-23']
- DC Voltage: 2.7 ~ 4.4
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-208 optical fiber to CAN converter can convert CAN bus signals to optical signal. The conversion time between CAN data and optical signals is microsecond, ensuring the real-time communication. The GCAN-208 supports any CAN bus communication protocol such as CANopen, SAE J1939, DeviceNet,... [See More]
- DC Voltage: 9~30V DC
- Network Options: CANbus
- DC Current: 20mA, 24V DC
- Operating Temperature: -40 to 185
from Kistler Group
The Type 5015A... is not only a charge amplifier but an universal Charge Meter with a graphical liquid crystal display. However, the 19" rack module is also suitable for measurements in an industrial environment. It can display instantaneous, peak and average values as well as reference deviations. [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Stand-alone
- DC Voltage: 2 - 20,000 mV
from OMEGA Engineering, Inc.
The OME-A-826PG is a 16-bit multifunction analog and digital I/O board for PC/AT compatible computers. The OME-A-826PG offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bits resolution. In addition, the OME-A-826PG has 16 digital inputs, 16 digital... [See More]
- Form Factor: PC Board
- Differential Channels: Yes
- Channels: 16
- Resolution: 16
from Red Pitaya, d.o.o.
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from D-TACQ Solutions
ACQ164CPCI is a high performance multichannel card aimed at phased array sonar, 3D seismic and system test applications. The board samples 64 input channels simultaneously with 24 bit resolution at speeds up to 128 kS/s (kilosamples per second) per channel sustained capture to memory or streamed to... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 64
- Form Factor: PC Board
- Differential Channels: Yes
from Acromag, Inc.
Multi-function I/O. The AXM-75 is a multi-function I/O module that adds A/D, D/A, and digital I/O signal processing functions to an FPGA board. These extension I/O modules plug directly onto many Acromag reconfigurable FPGA cards equipped with an AXM mezzanine connector. Analog Input. There are... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Modular Bay or Slot System
- Differential Channels: Yes
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20M-AI-AO-S - 1176000000, convert and isolate your current signals into useful and manageable signals for your input devices. The ACT20M-AI-AO-S - 1176000000 takes current signals of 0-10 V DC, 0-5 V DC, 0-20 mA, and 4-20 mA. It then... [See More]
- DC Voltage: 0-5/10 V DC/ 0/4-20 mA
- AC Current: 0-5/10 V DC/ 0/4-20 mA
- DC Current: 0-5/10 V DC/ 0/4-20 mA
- Excitation: Current
from Spectron Glass and Electronics Inc.
The SSY0135 RS232 Signal Conditioner is a Single Axis Conditioner, which delivers an RS232 output. Designed to utilize the entire line of SH Series Ceramic Tilt Sensors (not included), the SSY0135 is capable of supplying digital data over a +/-0.5 to +/-80 degrees full range (sensor dependent). The... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 1
- Form Factor: PC Board
- DC Voltage: 7V - 20V
from Apix, Inc.
Model DAQ8-100V4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version Voltage Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: DIN Rail
- Resolution: 16
from American Portwell Technology Inc.
Two Channel Analog Output with independent double-buffered, 12-bit D/A and 16-bits buffered digital I/O on a universal 3.3/5V powered half-sized PCI Card [See More]
- Signal Converter Type: Digital-to-Analog Converter
- Resolution: 12
- Form Factor: PC Board
- DC Voltage: -0.5-5.0 V
from WINSYSTEMS, INC.
PC/104 Data Acquisition module including 16 Analog-to-Digital (ADC) inputs and 48 bi-directional Digital I/O. Features. 16-bit Analog-to-Digital (ADC) converter with sample-and-hold circuit. Analog input ranges: 0-5V, 0-10V, ±5V and ±10V. 16 channels independently programmable for... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 2
- Form Factor: PC Board
- DC Voltage: 0-5V, 0-10V, ±5V, and ±10
from Define Instruments
What it does: Accepts high voltage input and outputs a signal reduced by a factor of 1000. Another useful accessory for Zen series monitoring stations, the HVA-1000 accepts a voltage of up to 1000V DC, and safely attenuates it to a suitable low voltage, which can then be input into almost any low... [See More]
- Signal Converter Type: Voltage Converter
- DC Voltage: 1000 V
- Form Factor: DIN Rail
- Outputs: Analog Voltage Output
from FUTEK Advanced Sensor Technology, Inc.
USB320 , External USB Output Kit , 24 Bit Resolution , Up To 16 Bit Noise Free , Standard , For Amplified Inputs (Voltage Only) , Up to 4800 SPS [See More]
- Signal Converter Type: Analog-to-Digital Converter
- DC Voltage: 12
- Form Factor: USB Drive
- User Interface: None
from Microchip Technology, Inc.
The TC1047 is a linear output temperature sensor whose output voltage is directly proportional to measured temperature. The TC1047 can accurately measure temperature from -40C to +125C. For the TC1047, the output voltage range is typically 100mV at -40C, 500mV at 0C, 750mV at +25C, and 1.75V at... [See More]
- Form Factor: ['DICE', 'WAFER', 'SOT-23']
- DC Voltage: 2.7 ~ 4.4
from Shenyang Vhandy Technology Co., Ltd.
GCAN-207 can realize bidirectional communication between RS232 or RS485 bus and CAN bus. It can make RS232 or RS485 devices connected to CAN bus or connect a host PLC/HMI Display into a CAN Bus network. GCAN-207 has intergrated isolation module on each interface and DIN rail to install. Application:... [See More]
- Form Factor: DIN Rail
- DC Current: 20mA, 24V DC
- DC Voltage: 9~30V DC
- Network Options: CANbus
from Kistler Group
Universal analog charge amplifier, optional Piezotron input; RS-232C & USB interface; extremely wide charge and frequency range; outstanding noise performance [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Stand-alone
- DC Voltage: 2 - 20,000 mV
from OMEGA Engineering, Inc.
The OME-A-8111 is a 12-bit multifunction analog and digital I/O board for PC/AT compatible computers. The OME-A-8111 offers 8 analog input channels, plus one channel of analog output with 12-bit resolution. In addition, the OME-A-8111 has 16 digital inputs and 16 digital outputs. The OME-A-8111... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: PC Board
- Resolution: 12
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from D-TACQ Solutions
The ACQ196CPCI board meets the requirement for high channel density simultaneous data acquisition in cost-sensitve applications. The board samples 96 input channels simultaneously with 16 bit resolution at sample rates up to 500kSPS (kilo-samples per second) per channel, while still offering a... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 32
- Form Factor: PC Board
- Differential Channels: Yes
from Acromag, Inc.
plusmn;5V via DB25 port connection or ±10V DC Input. 18 to 36V DC Power. Modbus TCP/IP, 10/100 Base-T(X). These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation. The DB25 port... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: DIN Rail
- Differential Channels: Yes
from Automation24, Inc.
With Weidm üller analog signal conditioning device ACT20P-PRO DCDC II-S - 1481970000, convert and isolate your analog signals into useful and manageable signal for your input devices. The ACT20P-PRO DCDC II-S - 1481970000 linearly converts an analog input signal, to an analog output signal that... [See More]
- DC Voltage: +/- 20 mV- +/- 300 V / +/- 0,1 mA- +/- 100 mA
- Outputs: Analog Voltage Output; Analog Current Output
- Excitation: Current
- Operating Temperature: -13 to 158
from Apix, Inc.
Model DAQ8-10V4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version Voltage Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS- [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: DIN Rail
- Resolution: 16
from American Portwell Technology Inc.
Four Channel Analog Output with independent double-buffered, 12-bit D/A and 16-bits buffered digital I/O on a universal 3.3/5V powered half-sized PCI Card [See More]
- Signal Converter Type: Digital-to-Analog Converter
- Resolution: 12
- Form Factor: PC Board
- DC Voltage: -0.5-5.0 V
from FUTEK Advanced Sensor Technology, Inc.
USB410 , External USB Output Kit , Standard , encoded version [See More]
- Signal Converter Type: Analog-to-Digital Converter
- DC Voltage: 4.5
- Form Factor: USB Drive
- User Interface: None
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-211 WiFi to CAN converter has integrated 2 CAN interface, 1 Ethernet interface and 1 WiFi interface. PC, mobile phone, Pad can connect to CAN bus network with this module. It can also be used in pairs as wireless CAN bus repeater. It supports software development and we provide the... [See More]
- DC Voltage: 9~30V(50mA, 24V DC);
- Network Options: CANbus
- DC Current: 20mA, 24V DC
- Operating Temperature: -40 to 185
from Kistler Group
The miniature charge amplifier Type 5039A converts the electrical charge signals yielded by piezoelectric sensors into proportional voltages. The instrument is integrated into a rugged metal housing according to degree of protection IP-65 and conceived for industrial use. The Type 5039A is a... [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Panel / Chassis Mount
- DC Voltage: -10 - 10 V
from OMEGA Engineering, Inc.
The D5000 Four Channel Sensor to Computer Modules are a family of complete solutions designed for data acquisition systems based on personal computers and other processor-based equipment with standard serial I/O ports. The modules convert four analog input signals to engineering units and transmit... [See More]
- Form Factor: Screw Mount
- Resolution: 15
- Channels: 1
- Accuracy: 0.0200
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
plusmn;5V, ±10V DC Input (selectable on each channel). 18 to 36V DC Power. Modbus TCP/IP, 10/100 Base-T(X). These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation. [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: DIN Rail
- Differential Channels: Yes
from Apix, Inc.
Model DAQ8-80mV4-1RTU. ISODIN Modbus RTU DIN MODULE. This Modbus RTU version mV Input Module features 8 independent channels and an isolated RS-485 interface. The channels are fully isolated with 3000 Vrms between Input, Power, RS-485 [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: DIN Rail
- Resolution: 16
from American Portwell Technology Inc.
Six Channel Analog Output with independent double-buffered, 12-bit D/A and 16-bits buffered digital I/O on a universal 3.3/5V powered half-sized PCI Card [See More]
- Signal Converter Type: Digital-to-Analog Converter
- Resolution: 12
- Form Factor: PC Board
- DC Voltage: -0.5-5.0 V
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail. The GCAN-204... [See More]
- Form Factor: DIN Rail
- DC Current: 20mA, 24V DC
- DC Voltage: 9~30V (20mA,24V DC);
- Network Options: CANbus
from Kistler Group
Charge Amplifier Type 5080A... is the successor to charge amplifier Types 5017B... and Types 5019B... . Thanks to the modular design up to eight amplifier modules can be inserted. Charge modules Type 5067A0 with BNC connector are standard, as an option it is as also possible to integrate Piezotron... [See More]
- Signal Converter Type: Charge Converter
- Channels: 1
- Form Factor: Modular Bay or Slot System
- DC Voltage: 20 - 30,000 mV
from OMEGA Engineering, Inc.
The OMB-DBK7 frequency-input card provides OMB-LOGBOOK and OMB-DAQBOARD-2000 Series data acquisition systems with four channels of frequency-measurement capability. The card measures the input signal ’s frequency and converts the frequency to a voltage, which can then be measured by the data... [See More]
- Signal Converter Type: Frequency-to-Voltage Converter
- Channels: 4
- Form Factor: PC Board
- Accuracy: 0.1000
from Red Pitaya, d.o.o.
STEMlab 125-14 4 Inputs is based on STEMlab 125-14 board, but instead of 2 inputs and 2 output channels offers 4 Input channels that with improved performance. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Voltage-to-Frequency Converter (optional feature); Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 8
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt ( ±100mV DC) input. Single or dual mechanical relay alarms. 10-36V DC power. Software configured. Multi-function alarms (limit, window, deviation, rate-of-change, peak/valley detection). On/off controller capability. Acromag's... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 1
- Form Factor: DIN Rail; Terminal Block
- Differential Channels: Yes
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. Based on their high channel density, a single 32 module segment includes 256 c [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 8
- Form Factor: DIN Rail
- Resolution: 16
from American Portwell Technology Inc.
Eight Channel Analog Output with independent double-buffered, 12-bit D/A, three 16-bit counter/timers and 24-bits buffered digital I/O on a universal 3.3/5V powered full-sized PCI Card [See More]
- Signal Converter Type: Digital-to-Analog Converter
- Resolution: 12
- Form Factor: PC Board
- DC Voltage: -0.5-5.0 V
from Shenyang Vhandy Technology Co., Ltd.
The GCAN-211 WiFi to CAN converter has integrated 2 CAN interface, 1 Ethernet interface and 1 WiFi interface. PC, mobile phone, Pad can connect to CAN bus network with this module. It can also be used in pairs as wireless CAN bus repeater. It supports software development and we provide the... [See More]
- DC Voltage: 9~30V(50mA, 24V DC);
- Operating Temperature: -40 to 185
- Network Options: CANbus
from Kistler Group
Charge Amplifier Type 5080A... is the successor to charge amplifier Types 5017B... and Types 5019B... . Thanks to the modular design up to eight amplifier modules can be inserted. Charge modules Type 5067A0 with BNC connector are standard, as an option it is as also possible to integrate Piezotron... [See More]
- Signal Converter Type: Charge Converter
- Channels: 8
- Form Factor: Stand-alone
- DC Voltage: 20 - 30,000 mV
from OMEGA Engineering, Inc.
The HH374 has a high resolution and fast analog to digital converter. Measurements settings and results are shown on the backlit LCD display. Data can be stored in the meter or directly saved on a computer through PC interface. Recorded data can be further processed on a computer. With the exclusive... [See More]
- Form Factor: Stand-alone; Portable
- DC Voltage: 60VDC Max
- Channels: 4
- AC Voltage: 24 Vrms AC Max
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
2 or 4 input channels, 0 to 20mA DC, 0 to 10V DC (selectable ranges). 0 to 20mA DC, 0 to 10V DC (selectable ranges) output. 10-36V DC power. Software configured, computes arithmetic operations, evaluates conditional and Boolean arguments, executes track & hold functions. IntelliPack math modules... [See More]
- Signal Converter Type: Current Loop Converter
- Channels: 2
- Form Factor: Terminal Block
- Differential Channels: Yes
from American Portwell Technology Inc.
First low profile High-Speed, Universal PCI, 16-bit Multifunction Analog I/O Board, provides 500k samples/second for the board  ¡  ¦s 16 single-ended or eight differential analog input channels. Auto calibration and 11 selectable voltage ranges. Fits in any 3.3/5V PCI... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 18
- Form Factor: PC Board
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The TCIC Series comprises low-cost, high-speed thermocouple temperature measurement data acquisition cards with USB interface. TCIC cards use an 8-channel, high-resolution A/D converter with on-board noise filters. On-board cold junction compensation and temperature conversion enable standalone... [See More]
- Form Factor: PC Board
- Accuracy: 0.0500
- Channels: 8
- DC Voltage: ±500 mV
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
Thermocouple (J, K, T, R, S, E, B, N), RTD (Pt, Ni, Cu), millivolt ( ±100mV DC), 0 to 500 ohms input. 0 to 20mA DC, 0 to 10V DC output. Mechanical relay (25V @ 5A) alarm. 10-36V DC power. Software configured. Performs linearization, square root extraction, and optional limit alarm functions. [See More]
- Signal Converter Type: Current Loop Converter; Transmitter
- DC Voltage: 100mV DC
- Form Factor: DIN Rail
- Inputs: Thermocouple Input; RTD Input
from American Portwell Technology Inc.
12-bit Multifunction A/D 100Khz card. It accepts up to 16 single-ended inputs or eight differential inputs, eight programmable voltage ranges plus 4-20mA inputs. Additional I/O includes two 12-bit D/A, 24 Digital I/O, on-board Pacer clock and counter timers. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: PC Board
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The iNET-400 system is a low cost card cage that attaches to Windows computers via USB 2.0. The advantage of a card cage is that you can select which I/O modules to install as needed to build a customized system. The instruNet card cage typically has one A/D measurement module and additional modules... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: PC Board; Modular Bay or Slot System
- Differential Channels: Yes
from Red Pitaya, d.o.o.
STEMlab 125-14 Edu Pack is based on Red Pitaya's best-selling DAQ platform and with the chosen accessories a perfect fit for educational purposes. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
16 differential inputs (two 8-channel groups). 12 or 14-bit A/D. 125KHz throughput. 8 µS conversion time for 8-channel group. 512 sample FIFO buffer, ±10V input range. IP340/341 Industrial I/O Pack (IP) modules provide fast, high resolution, simultaneous A/D conversion of up to eight... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: PC Board
- Differential Channels: Yes
from American Portwell Technology Inc.
Low cost 12-bit 100KHz, A/D multifunction board for use in PCI-Bus computers with 3.3/5V PCI slots. It accepts up to 16 single-ended or eight differential inputs with eight programmable ranges (Unipolar & Bipolar) and 4-20mA current range. [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: PC Board
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The DRP-8500 Series modules offer a low cost analog I/O solution for micro PLCs. The series is ideal for discrete automation applications requiring one or two analog I/O channels. All models in the series interface with the PLC high speed counter inputs or pulse outputs. Digital signal pulse-width... [See More]
- Signal Converter Type: Voltage-to-Frequency Converter; Analog to Hz
- DC Voltage: 0-10 V
- Form Factor: DIN Rail
- DC Current: 4-20 mA
from Red Pitaya, d.o.o.
STEMlab 125-14 External clock is based on the STEMlab 125-14 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. With this modification, users... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
20 differential or 40 single-ended input channels. 200KHz throughput. 4.5 µS/conversion. Selectable input range ( ±5V, ±10V, 0-10V). The IP320A monitors 20 differential or 40 single-ended input channels. When used with a carrier that holds four IP modules, up to 160 inputs can be... [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 40
- Form Factor: PC Board
- Differential Channels: Yes
from American Portwell Technology Inc.
Multifunction, high-speed, analog-to-digital converter board for use in PCI-Bus computers. It accepts up to 16 single-ended or eight differential inputs. Include foregoing plus includes a 2K Samples FIFO data buffer and a 2K words Point List FIFO buffer [See More]
- Signal Converter Type: Analog-to-Digital Converter
- Channels: 16
- Form Factor: PC Board
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The DRC-4710 and DRC-4720 DIN rail mount signal conditioners are self-contained DC powered modules designed for bridge input (load cell, strain gage) or voltage input (not connected to a bridge, excitation supply not used). These signal conditioners contain a precision instrumentation amplifier,... [See More]
- Signal Converter Type: Voltage Converter; Current Loop Converter
- DC Voltage: 0-30 mV
- Form Factor: DIN Rail
- Inputs: Bridge Input
from Red Pitaya, d.o.o.
Based on the STEMlab 125-14 Starter kit and it comes with individual ISO17025 certificate. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
Potentiometer/slide wire: 100 to 100k ohms. Thermistor: 0 to 100k ohms, -50 to 200 °C. 4 to 20mA DC. 12-32V DC power. The TT234 model is a space-saving two-wire transmitter that isolates and converts a resistive sensor input to a proportional 4-20mA signal. Power is received from the output loop... [See More]
- Signal Converter Type: Current Loop Converter
- Inputs: Thermistor Input
- Form Factor: DIN Rail
- Outputs: Analog Current Output
from American Portwell Technology Inc.
High-speed 250kHz 12-bit A/D for 16 single-ended and 8 differential inputs from any computer with a USB 2.0 port. PC/104 sized board and mounting holes installed in a small rugged enclosure with SCSI connectior for Data Acquisiion and digital control. The unit has software autocalibration, 16... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Stand-alone
- Differential Channels: Yes
from OMEGA Engineering, Inc.
The DMD4059 accepts an input from full Wheatstone strain bridge sensors, pressure transducers or load cells. It provides filtering, amplifies, and converts the millivolt input signal into the selected dc voltage or current output that is linear to the input. The 3-way 1200V isolation eliminates... [See More]
- Signal Converter Type: Voltage Converter
- Channels: 4
- Form Factor: DIN Rail
- Features: SigIsol
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise Bare OEM is the ultimate solution for customization and adaptability in your electronic project. This board, which comes without the usual connectors, provides unparalleled freedom and versatility to tailor your designs according to your specific needs. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)
from Acromag, Inc.
Multi-range ±20mA or ±500mV input. 4-20mA output (sink/source). 12-32 V DC loop/local power. The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage... [See More]
- Signal Converter Type: Current Loop Converter
- DC Voltage: 500mV
- Form Factor: DIN Rail
- DC Current: 20mA
from American Portwell Technology Inc.
High-speed 500kHz 12-bit A/D for 16 single-ended and 8 differential inputs from any computer with a USB 2.0 port. PC/104 sized board and mounting holes installed in a small rugged enclosure with SCSI connectior for Data Acquisiion and digital control. The unit has real-time autocalibration, 16... [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter
- Channels: 16
- Form Factor: Stand-alone
- Differential Channels: Yes
from OMEGA Engineering, Inc.
OMEGA ® high accuracy integral signal conditioners are designed for direct mounting onto OMEGA FTB-100 and 200 Series turbine meters. The input circuitry of the signal conditioners has been designed to receive and condition low level turbine meter signals while rejecting unwanted noise and... [See More]
- Signal Converter Type: Frequency Converters
- Accuracy: 0.0500
- Form Factor: Panel / Chassis Mount
- DC Voltage: 120V RMS Max
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise is based on a STEMlab 125-14 board that is populated with additional linear analog power for analog power supplies to reduce RF inputs and outputs noise and consequently increase ENOB. [See More]
- Signal Converter Type: Analog-to-Digital Converter; Digital-to-Analog Converter; Frequency Converters; Voltage Converter; Frequency-to-Voltage Converter; Voltage-to-Frequency Converter; Current-to-Voltage Converter (optional feature); Current Loop Converter (optional feature)
- Channels: 6
- Form Factor: PC Board; Panel / Chassis Mount; Modular Bay or Slot System; DIN Rail; Stand-alone
- Differential Channels: Yes (optional feature)