Polypropylene (PP) Industrial Valves
from Blacoh Fluid Control, Inc.
1/4" POLY BACK PRESSURE VALVE, PTFE, NPT, MINI [See More]
- Primary Material: PP
- Valve Size: 0.25
- Valve Type: Back Flow
- Maximum Pressure: 150.00
from Plast-O-Matic Valves, Inc.
Air-operated pinch valve designed for corrosive slurries; long-life EPDMh2 sleeve with a variety of pipe sizes and connection materials. EPDM Sleeve tested to over 1,000,000 cycles in laboratoryconditions. High flow rate and bubble tight shutoff: A highperformance, clean and affordable alternative... [See More]
- Primary Material: PP; Wetted Materials: PVC, CPVC, PP or PVDF; EPDM
- Media: Water; Corrosive Slurries, Chemicals and High Purity Applications; Chemical
- Valve Type: Pinch; Sanitary; Shut Off
- Valve Size: 0.50 to 1.00
from Asahi/America, Inc.
The AVBVX allows for a simple transition between rigid PVC pipe and flexible PFA tubing integrated into Asahi/America ’s Type-21 manual ball valve. PFA x PFA versions are also available. [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, CPVC, PP, PVDF
-
Connection Description: Threaded;
Socket, Threaded, Flanged, series Flowell 60
series, Super Type Pillar fitting, Super 300 Type Pillar fitting , Flare Type, Hose nipple
- Valve Type: Ball
from Kuriyama of America, Inc.
FEATURES AND ADVANTAGES. Polypropylene material is glass filled for added strength and durability. Precision molded to ensure consistency in form and function. Full Port design allows free flow of material. MATERIAL SPECIFICATIONS. Glass filled polypropylene. Teflon TM seals. Viton ® 0 Ring... [See More]
- Primary Material: PP
- Valve Size: 1.50
- Valve Type: Ball
- Maximum Pressure: 150.00
from Assured Automation
Description: The FK Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process flow conditions. The special trapezoid shape of the liner and a serrated body cavity guarantee a bubble tight seal while keeping break torque at an absolute... [See More]
- Primary Material: PP
- Media: Water; Wastewater; Chemical
- Valve Type: Butterfly
- Valve Size: 2.50 to 12.00
from RS Components, Ltd.
AE30A automatic air vent,105mm H 56mmdia [See More]
- Primary Material: PP; Copper Alloy
- Maximum Pressure: 145.04
- Media: Air
- Connection Description: Threaded
from Blacoh Fluid Control, Inc.
1/2" POLY BACK PRESSURE VALVE, PTFE, 150# FLANGE, MINI [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Back Flow
- Maximum Pressure: 150.00
from Asahi/America, Inc.
A fast-draining valve for drainage applications, the AVQDV integrates the actuator into the valve body, reducing the install footprint. The valve is true-union and can be installed both horizontally and vertically. [See More]
-
Primary Material: PVC; PP;
PVC, PP
- Valve Size: 0.79 to 3.94
- Valve Type: Drain
-
Connection Description: Threaded;
Socket, Threaded, Flanged
from Kuriyama of America, Inc.
FEATURES AND ADVANTAGES. Polypropylene material is glass filled for added strength and durability. Precision molded to ensure consistency in form and function. Full Port design allows free flow of material. MATERIAL SPECIFICATIONS. Glass filled polypropylene. Teflon TM seals. Viton ® 0 Ring... [See More]
- Primary Material: PP
- Valve Size: 2.00
- Valve Type: Ball
- Maximum Pressure: 100.00
from RS Components, Ltd.
AE30B automatic air vent,155mm H 56mmdia [See More]
- Primary Material: PP; Copper Alloy
- Maximum Pressure: 145.04
- Media: Air
- Connection Description: Threaded
from Blacoh Fluid Control, Inc.
1/2" POLY BACK PRESSURE VALVE, PTFE, UNION, MINI [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Back Flow
- Maximum Pressure: 150.00
from Asahi/America, Inc.
The sanitary end connections for the T-342 diaphragm valve (available in PVDF, PPn, and PP) are added using beadless welding, which leaves no weld bead or crevice for bacteria buildup. Available in 1/2" - 2" (20mm - 63mm) in Purad PVDF ®, PolyPure ® PPn, or PP-Pure ® PP high purity... [See More]
-
Primary Material: PP; PVDF;
Purad® UHP PVDF, PolyPure® natural polypropylene, PP-Pure® pigmented polypropylene
- Valve Size: 0.50 to 2.00
- Valve Type: Diaphragm
from Kuriyama of America, Inc.
FEATURES AND ADVANTAGES. Polypropylene material is glass filled for added strength and durability. Precision molded to ensure consistency in form and function. Full Port design allows free flow of material. MATERIAL SPECIFICATIONS. Glass filled polypropylene. Teflon TM seals. Viton ® 0 Ring... [See More]
- Primary Material: PP
- Valve Size: 4.00
- Valve Type: Ball
- Maximum Pressure: 100.00
from RS Components, Ltd.
AE30C automatic air vent,155mm H 56mmdia [See More]
- Primary Material: PP; Copper Alloy
- Maximum Pressure: 145.04
- Media: Air
- Connection Description: Threaded
from Blacoh Fluid Control, Inc.
1/2" POLY BACK PRESSURE VALVE, PTFE, NPT [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Back Flow
- Maximum Pressure: 150.00
from Asahi/America, Inc.
Type-56 butterfly valves are quarter turn plastic valves with equal percentage type flow characteristics. They provide moderate flow control and therefore can be used for both on/off and modulating service. Good tolerance to suspended solids but not recommended for use with slurries or debris. The... [See More]
-
Primary Material: PP; PVDF;
PP and PVDF
- Media: Powder Solids
- Valve Type: Butterfly
- Valve Size: 16.00
from RS Components, Ltd.
1/2"F X 1/2"F Double Check Valve [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 0.50
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Blacoh Fluid Control, Inc.
1/2" POLY BACK PRESSURE VALVE, PTFE, UNION [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Back Flow
- Maximum Pressure: 150.00
from Asahi/America, Inc.
Type-75 butterfly valves are quarter turn plastic valves with equal percentage type flow characteristics. They provide moderate flow control and therefore can be used for both ON/OFF and modulating service. Good tolerance to suspended solids but not recommended for use with slurries or debris. The... [See More]
-
Primary Material: PP; PVDF;
PP and PVDF
- Media: Powder Solids
- Valve Type: Butterfly
- Valve Size: 18.00 to 24.00
from RS Components, Ltd.
3/4"F X 3/4"F Double Check Valve [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 0.75
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Blacoh Fluid Control, Inc.
1/2" POLY BACK PRESSURE VALVE RIGHT ANGLE 90, PTFE, UNION, MINI [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Back Flow
- Maximum Pressure: 150.00
from Asahi/America, Inc.
Swing check valves have the option to install an external spring assist assembly. This spring is made from 316SS and is mounted external to the valve. When fluid pressure starts to drop, the spring retracts the swing arm and brings the disc back into the seat position. This effectively reduces the... [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, PP, PVDF
- Valve Size: 0.75 to 8.00
- Valve Type: Check
- Actuation: Manual
from RS Components, Ltd.
1"F X 1"F Double Check Valve [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 1.00
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Blacoh Fluid Control, Inc.
1/2" POLY PRESSURE RELIEF VALVE, EPDM, UNION, MINI [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Relief
- Maximum Pressure: 150.00
from Asahi/America, Inc.
The Asahi/America ball check valve employs a free moving ball, which unseats to permit flow in one direction, but seals against a seat to prevent backflow. It may be installed vertically or horizontally. Also available as foot valve for suction side of pump. [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, CPVC, PP and PVDF
- Valve Size: 0.50 to 4.00
- Valve Type: Ball; Check
- Actuation: Manual
from RS Components, Ltd.
1 1/4"F X 1 1/4"F Double Check Valve [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 1.25
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Blacoh Fluid Control, Inc.
1/2" POLY PRESSURE RELIEF VALVE, EPDM, 150# FLANGE [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Relief
- Maximum Pressure: 150.00
from Asahi/America, Inc.
The type-14 diaphragm valve has been specified with confidence since 2002. Design features include industry-leading body-to-bonnet sealing performance isolating the bonnet components from the media, high visibility position indication with built-in travel stop providing visual confirmation while... [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, CPVC, PP and PVDF
- Media: Chemical
- Valve Type: Diaphragm
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
1 1/2"F X 1 1/2"F Double Check Valve [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 1.50
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Blacoh Fluid Control, Inc.
1/2" POLY PRESSURE RELIEF VALVE, EPDM, UNION [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Relief
- Maximum Pressure: 150.00
from Asahi/America, Inc.
The type-14 diaphragm valve has been specified with confidence since 2002. Design features include industry-leading body-to-bonnet sealing performance isolating the bonnet components from the media, high visibility position indication with built-in travel stop providing visual confirmation while... [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, CPVC, PP and PVDF
- Media: Chemical
- Valve Type: Diaphragm
- Valve Size: 0.50 to 2.00
from RS Components, Ltd.
15mm X 15mm DCV Nickel Plated [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 0.59
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Asahi/America, Inc.
Multiturn valve good for flow control and use with viscous/slurry lines due to their high resistance to clogging. These valves have a uniquely designed body and bonnet, as well as a diaphragm with new sealing designs, by computer aided analysis for superior sealing. [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, PP, PVDF
- Valve Size: 5.00 to 6.00
- Valve Type: Diaphragm
- Actuation: Manual
from RS Components, Ltd.
22mm X 22mm DCV Nickel Plated [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 0.87
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Asahi/America, Inc.
Multiturn valves good for flow control and use with viscous/slurry lines due to their high resistance to clogging. The Type-G is the largest of the Asahi diaphragm valves, available only in 8" and 10" sizes with flanged end connections. [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, PP and PVDF
- Valve Size: 8.00 to 10.00
- Valve Type: Diaphragm
- Actuation: Manual
from RS Components, Ltd.
28mm X 28mm DCV Nickel Plated [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 1.10
- Valve Type: Check; Double
- Maximum Pressure: 145.04
from Asahi/America, Inc.
The flow through a globe valve follows a course that takes nearly two 90 ° changes in direction. But, because the seating of a globe valve is parallel to the line of flow of the liquid, it can be used to throttle the flow to any required degree or to give positive shut-offs. The economy and... [See More]
-
Primary Material: PVC; PP;
PVC and PP
- Valve Size: 0.50 to 4.00
- Valve Type: Globe
- Actuation: Manual
from RS Components, Ltd.
15mm X 15mm Single Check Valve (Nickel) [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 0.59
- Valve Type: Check; Single
- Maximum Pressure: 145.04
from Asahi/America, Inc.
Needle valve features ultra precise flow control for critical high purity and aggressive fluids. The needle tip is integrated into the PTFE diaphragm. [See More]
-
Primary Material: PP;
PPn, PVDF, PFA O-Ring FKM*
- Valve Size: 0.12 to 0.50
- Valve Type: Needle
- Maximum Pressure: 145.04
from RS Components, Ltd.
22mm X 22mm Single Check Valve (Nickel) [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 0.87
- Valve Type: Check; Single
- Maximum Pressure: 145.04
from Asahi/America, Inc.
The Type-14 diaphragm valve is available with an optional pneumatic actuator for operation via a pressurized air supply. The pneumatic actuator is available in both air to air (double acting) and air to spring (single acting) styles. The actuator replaces the valve bonnet and is an integral part of... [See More]
-
Primary Material: PP;
Glass filled polypropylene
- Media: Chemical
- Valve Type: Diaphragm
- Valve Size: 0.50 to 2.00
from RS Components, Ltd.
28mm X 28mm Single Check Valve (Nickel) [See More]
- Primary Material: PP; Copper Alloy
- Valve Size: 1.10
- Valve Type: Check; Single
- Maximum Pressure: 145.04
from Asahi/America, Inc.
The Asahi/America globe control valve is the most advanced available in design, features, performance, and cost effectiveness. Its design includes superior proportional control characteristics and safety features for a wide variety of applications, ranging from common fluids to the most aggressive... [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, PP, PVDF and PTFE
- Media: Chemical
- Valve Type: Globe
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
Mini Ball Valve In-Line 6mm Push-In [See More]
- Primary Material: PP; Polypropylene with Fibreglass
- Media: Air
- Valve Type: Control Valve
- Valve Size: 0.10
from Asahi/America, Inc.
The Asahi/America globe control valve is the most advanced available in design, features, performance, and cost effectiveness. Its design includes superior proportional control characteristics and safety features for a wide variety of applications, ranging from common fluids to the most aggressive... [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, PP, PVDF and PTFE
- Media: Chemical
- Valve Type: Globe
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
Mini Ball Valve In-Line 8mm Push-In [See More]
- Primary Material: PP; Polypropylene with Fibreglass
- Media: Air
- Valve Type: Control Valve
- Valve Size: 0.10
from Asahi/America, Inc.
The Type-14 diaphragm valve is available with an optional pneumatic actuator for operation via a pressurized air supply. The pneumatic actuator is available in both air to air (double acting) and air to spring (single acting) styles. The actuator replaces the valve bonnet and is an integral part of... [See More]
-
Primary Material: PP;
Glass filled polypropylene
- Media: Chemical
- Valve Type: Diaphragm
- Valve Size: 0.50 to 4.00
from RS Components, Ltd.
Mini Ball Valve In-Line 10mm Push-In [See More]
- Primary Material: PP; Polypropylene with Fibreglass
- Media: Air
- Valve Type: Control Valve
- Valve Size: 0.10
from Asahi/America, Inc.
The Type-14 diaphragm valve is available with an optional pneumatic actuator for operation via a pressurized air supply. The pneumatic actuator is available in both air to air (double acting) and air to spring (single acting) styles. The actuator replaces the valve bonnet and is an integral part of... [See More]
-
Primary Material: PP;
Glass filled polypropylene
- Media: Chemical
- Valve Type: Diaphragm
- Valve Size: 0.50 to 2.00
from RS Components, Ltd.
Mini Ball Valve In-Line 12mm Push-In [See More]
- Primary Material: PP; Polypropylene with Fibreglass
- Media: Air
- Valve Type: Control Valve
- Valve Size: 0.10
from Asahi/America, Inc.
Type-23 Multiport ® plastic ball valves are three way ball valves with true union design. The use of a multiport ball valve simplifies piping and eliminates the need for an additional valve and tee fitting. A “L ” ported ball valve permits flow from the bottom entry to either the... [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, CPVC, PP, PVDF
- Valve Size: 0.50 to 4.00
- Valve Type: Ball
- Actuation: Manual
from RS Components, Ltd.
MHA1-M1H-2/2G-0,9-PI solenoid valve [See More]
- Primary Material: PP; PA-Reinforced, PPS-Reinforced
- Media: Air
- Valve Type: Solenoid
- Number of Ports: 2
from Asahi/America, Inc.
2 to 5-way ball valves (Series 6L) in PP, natural PP, PVDF and PFA. Manual operated. [See More]
-
Primary Material: PP; PVDF;
PP, PVDF, PFA
- Valve Size: 0.25 to 0.50
- Valve Type: Ball
-
Connection Description: Threaded;
G or NPT Thread
from RS Components, Ltd.
MHJ10-S-2,5-QS-6-HF/LP Solenoid valve [See More]
- Primary Material: PP; PA-Reinforced, PPS-Reinforced
- Media: Air
- Valve Type: Solenoid
- Valve Size: 0.24
from Asahi/America, Inc.
Plastic Manual Ball Valves. Type-21/21a ball valves are corrosion resistant plastic manual true union design quarter turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They are typically used in on/off applications and are offer relatively poor flow control. [See More]
-
Primary Material: PVC; PP; PVDF;
PVC, CPVC, PP, and PVDF
- Valve Size: 0.50 to 4.00
- Valve Type: Ball
from RS Components, Ltd.
2/2-WAY MAGNETIC VALVE [See More]
- Primary Material: PP; PPS
- Media: Water; Aqueous Solution, Compressed Air, Water; Air; Compressed Air
- Valve Type: Solenoid; 2/2
- Maximum Pressure: 145.04
from Asahi/America, Inc.
The V82/182 pressure regulator controls upstream pressure fluctuations to critical points of use. The regulator has no wetted metal components, includes an integral pressure gauge isolated from the mediaand can be adjusted in-line under pressure. [See More]
-
Primary Material: PP;
PolyPure® PPn & PP-Pure® Pigmented PP
- Maximum Pressure: 150.00
- Valve Size: 0.79 to 4.33
from Asahi/America, Inc.
The V186 back pressure regulator maintains adequate upstream pressure as upstream pressure reduces from branch line cycling. The V186 may also be used as an inline pressure relief valve. The piston spring keeps the outlet closed until the set point pressure is achieved. [See More]
-
Primary Material: PP;
Purad® PVDF, PolyPure® PPn & PP-Pure® Pigmented PP
- Maximum Pressure: 150.00
- Valve Size: 0.79 to 2.48
from NIBCO INC.
Black Polypropylene valves for use with hot corrosive liquids, chemical processing, industrial plating, laboratory and industrial waste drainage systems, and waste treatment systems. Valve pressure rating 20 psi at 73 °F water non-shock full-port, Maximum service temperature 180 °F, Full... [See More]
- Primary Material: PP
- Valve Size: 0.50 to 4.00
- Valve Type: Ball Check; Ball; Check; Shut Off
- Maximum Pressure: 20.00
from U.S. Plastic Corporation
This 1-1/2" FNPT GFPP true union ball valve has EPDM O-rings and PTFE seats. It is 6.85" in overall length and weighs 2.15 lbs. It is rate up to 150 PSI at 70F for water service and has a maximum service temperature of 240F. [See More]
- Primary Material: PP
- Valve Size: 1.50
- Valve Type: Ball
- Connection Description: Threaded; Union
from Qosina Corp.
Qosina offers a variety of stopcocks that are in stock and ready for immediate delivery. Qosina part #11146 is an ISO 80369-7 compliant, 1-way stopcock that features a female luer lock and a male luer slip. With a polycarbonate body, blue HDPE handle and natural polypropylene non-vented cap, this... [See More]
- Primary Material: PE; PP; PC, HDPE, PP
- Maximum Pressure: 30.00
- Media: Water; Air
from PT
Polypropylene ball valve, glass filled poly, corrosion resistance [See More]
- Primary Material: PP
- Media: Water; Wastewater
- Valve Type: Ball
- Valve Size: 0.50 to 3.00
from KZVALVE
The KZValve QX Series Ball Valves are engineered for actuation and. designed to work with the KZValve actuators. These reliable valves are proven performers season after season. • 3/4" to 2" full port 2-way ball valves. • Valve body: Polypropylene or nylon. • Ball: 316 stainless... [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 1.50
from Air Logic
The Check Valves permit flow in one direction only; the operation of the check valve is based on the movement of a small disc within the housing. The disc shifts within the housing as the pressure differential changes from forward to reverse. A flat surface on one side of the disc seals off flow,... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Wafer; Check
- Valve Size: 0.06 to 0.12
from Western Analytical Products
. Solenoid operated isolation valves provide fast reliable response to meet continuous duty performance at low power levels. Inert flow path of PTFE provides the highest level of chemical compatibility. Two way NC or NO or Three way configuration. Designed for over 20 million cycles. Fast response... [See More]
- Primary Material: PP
- Maximum Pressure: 20.00
- Valve Type: Isolation Valve
- Flow (Cv): 0.01
from Valcor Engineering Corporation
The SV51 series is a direct acting, 2-way normally closed, diaphragm isolation solenoid valve. Valcor designed this series valve with a diaphragm to isolate the valves metallic parts from the media being handled. Available with polypropylene and PTFE body combined with Viton, EPDM or PTF diaphragm,... [See More]
- Primary Material: PTFE; PP
- Media: Water; Gas; Chemical
- Valve Type: Control Valve; Solenoid
- Valve Size: 0.25 to 0.38
from DK-LOK U.S.A.
Up to 6000psig (413bar). Up to 204 ℃ (400 ℉). SS316. Cracking pressure 50 to 6000psing (3.4 to 413bar). DK-LOK OD 1/4 - 1/2 inch. Pipe thread 1/4 - 1/2 inch [See More]
- Primary Material: Stainless Steel; PP; Rubber (optional feature); Vitron (optional EPDM and BUNA N)
- Media: Water; Air
- Valve Type: Relief
- Valve Size: 0.19
from Iwaki America and Walchem, IWAKI America Inc
Walchem diaphragm back pressure valves are used to enhance the performance of chemical feed pumps and systems by providing a constant discharge head pressure. These valves also function as an antisyphon valve. The diaphragm is held against the seat by the internal spring. Back pressure is adjustable... [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Relief
- Maximum Pressure: 150.00
from International Polymer Solutions Inc.
IPS Drain Valve (DV) series is a large orifice valve capable of handling large volumes of corrosive fluids via an all non-metallic wetted surface. For cost efficiency this valve is fabricated from PVC or Polypropylene. However, it is available in PVDF or PTFE, with Kalrez O-rings. This valve is also... [See More]
- Primary Material: PVC; PTFE (optional feature); PP; PVDF (optional feature)
- Media: Chemical
- Valve Type: Drain
- Valve Size: 0.75 to 2.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.19
from GF Piping Systems
GF Piping Systems provide Butterfly Valves with a comprehensive range of products for water and lug style applications. Our systems' modular design principle allows you to exchange individual system components-fast, easily and at very little expense. Types: Type 563 Aqua Butterfly Valve from Georg... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Valve Size: 2.00 to 24.00
- Valve Type: Butterfly
- Maximum Pressure: 150.00
from Cole-Parmer
• True union ball valve with added safety and functionality for a diverse range of applications. • PTFE ball seat with high abrasion resistance. • Built-in tool for easy adjustment of ball torque. • Threaded mounting inserts for fixed-point attachment [See More]
- Primary Material: PP
- Maximum Pressure: 145.00
- Valve Type: Ball
- Flow (Cv): 5.00
from NIBCO INC.
Natural Polypropylene (Chem-Pure) valves for use with deionized water systems, clean chemical processes, pharmaceutical operations and food processing. Valve pressure rating 150 psi at 73 °F water non-shock full-port, Maximum service temperature 180 °F, True Bloc ® design, FKM O-ring,... [See More]
- Primary Material: PP
- Valve Size: 0.50 to 3.00
- Valve Type: Ball Check; Ball; Check; Shut Off
- Maximum Pressure: 150.00
from U.S. Plastic Corporation
Control liquid level in all tanks with installation through tank wall or over the top of tank wall. Excellent for corrosive chemicals as they contain no metal parts in solution. Float valve automatically replaces liquid lost by evaporation etc. For pressures to 80 psi. FKM O-Rings. Max. temp. PVC is... [See More]
- Primary Material: PVC; PP
- Valve Size: 0.25
- Valve Type: Float
from Qosina Corp.
Qosina offers a variety of stopcocks that are in stock and ready for immediate delivery. Equipped with caps, Qosina part #17624 is an ISO 80369-7 compliant, 3-way stopcock that features 2 female luer locks and a male luer slip. With a tinted polysulfone body, a blue HDPE handle and polypropylene... [See More]
- Primary Material: PE; PP; PSU, HDPE, PP
- Maximum Pressure: 29.00
- Media: Water; Air
from KZVALVE
The KZValve QX Series 3-Way, Side Load, Full Port, Ball Valves (On-On Diverter) are engineered for actuation and designed to work with the KZValve actuators. These reliable valves are proven performers season after season. • 3/4", 1" and 11/2" full port valves. • Ball: 316 stainless steel. [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Diverter; Ball
- Valve Size: 1.50
from Air Logic
The plastic Needle Valves are ideal for instrumentation and industrial applications; they are designed for inline and panel mounted installation. The Needle Valves are adjustable from 0 to the equivalent flow of a 0.025" diameter orifice; the flow is restricted in both directions. The 6 degree angle... [See More]
- Primary Material: PP; 20% Glass Filled
- Media: Air; Compressed Air
- Valve Type: Needle
- Valve Size: 0.03 to 0.06
from Western Analytical Products
. Solenoid operated isolation valves provide fast reliable response to meet continuous duty performance at low power levels. Inert flow path of PTFE provides the highest level of chemical compatibility. Two way NC or NO or Three way configuration. Designed for over 20 million cycles. Fast response... [See More]
- Primary Material: PP
- Actuation: Electric
- Valve Type: Isolation Valve
from Valcor Engineering Corporation
Description. The SV61 & SV62 series are direct acting, 2-way normally closed general-purpose solenoid valves. The spring loaded poppet provides positive shifting and bubble tight shut-off when de-energized. Minimal moving parts make these valves dependable and suitable for long life service. [See More]
- Primary Material: Brass / Bronze (optional feature); PP
- Media: Water (optional feature); Gas (optional feature)
- Valve Type: Control Valve; Poppet; Solenoid
- Valve Size: 0.06 to 0.25
from Iwaki America and Walchem, IWAKI America Inc
Anti-Syphon Valve. Enables feeding into suction/negative pressure applications or metering fluids “downhill ”. Back Pressure Valve. Provides accurate metering of fluids into low or open discharge pressures. Pressure Relief Valve. Adjustable between 30 psi and 125 psi [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Relief
- Maximum Pressure: 150.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.25
from GF Piping Systems
GF Piping Systems plastic check valves provide minimum pressure loss and can be mounted horizontally or vertically. Our check valves offer good flow characteristics and compact design. Types: Types 561 and 562 ring in a new generation of valves, featuring more safety, simplicity,. Type 301 Y-Globe... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Valve Size: 0.38 to 12.00
- Valve Type: Ball Check; Swing; Wafer; Check
- Connection Description: BoltFlange (optional feature); Tube Fitting; Butt Weld (optional feature); Socket Weld; Fusion
from Cole-Parmer
bull; Ideal for low-pressure applications. Choose from economical LDPE with neoprene disc; autoclavable PP with neoprene disc; or autoclavable PP with Hastelloy C <reg > springs, O-rings made of Viton <reg >, and built-in 149- Â µm screen <emdash >available in check... [See More]
- Primary Material: PP
- Maximum Pressure: 20.00
- Valve Type: Check
from NIBCO INC.
Red Kynar ® (PVDF) valves for use with hot corrosive liquids, chemical processing, industrial plating, and waste treatment systems. Valve pressure rating 150 psi at 73 °F water non-shock full-port, Maximum service temperature 280 °F, Full port, True Bloc ® design, FKM O-ring, Female... [See More]
- Primary Material: PP; PVDF
- Media: Corrosive Liquids
- Valve Type: Ball Check; Ball; Check; Shut Off
- Valve Size: 0.50 to 4.00
from U.S. Plastic Corporation
3-Way poly ball valves are precision molded from polypropylene that is reinforced with fiber glass for additional strength. The self-aligning ball moves freely against the PTFE seats for smooth operation. The ball is diamond turned, after molding, to make it spherically perfect, which provides... [See More]
- Primary Material: PP
- Valve Size: 0.75
- Valve Type: Ball
- Number of Ports: 3
from Qosina Corp.
Four-port Thru Flow Double Elbow Style Manifold, Barbed, Natural - 61962 [See More]
- Primary Material: PP; PP
- Media: Water; Air
from KZVALVE
1 1/2" Polypropylene, 2-way, full port, stainless steel ball, FNPT, ball valve, rated for 125 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 1.50
from Western Analytical Products
. Solenoid operated isolation valves provide fast reliable response to meet continuous duty performance at low power levels. Inert flow path of PTFE provides the highest level of chemical compatibility. Two way NC or NO or Three way configuration. Designed for over 20 million cycles. Fast response... [See More]
- Primary Material: PP
- Maximum Pressure: 20.00
- Valve Type: Isolation Valve
- Flow (Cv): 0.01
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.38
from GF Piping Systems
Ball Valves: Available in PVC and CPVC, the type 104 ball valve from Georg Fischer offers an economic solution for less demanding applications. The type 104 is based on the same industrial ball valve Georg Fischer uses in other applications. This means the valve is true union and can be repaired if... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Valve Size: 0.38 to 12.00
- Valve Type: Ball; Butterfly
- Maximum Pressure: 150.00 to 232.00
from Cole-Parmer
bull; Ideal for low-pressure applications. Choose from economical LDPE with neoprene disc; autoclavable PP with neoprene disc; or autoclavable PP with Hastelloy C <reg > springs, O-rings made of Viton <reg >, and built-in 149- Â µm screen <emdash >available in check... [See More]
- Primary Material: PP
- Maximum Pressure: 20.00
- Valve Type: Check
from U.S. Plastic Corporation
Valves have stainless steel bolts and are made of precision molded polypropylene. Polypropylene is reinforced with fiberglass for additional strength. The self-aligning ball moves freely against the PTFE seats for smooth operation. The ball is diamond turned, after molding, to make it spherically... [See More]
- Primary Material: PP
- Valve Size: 0.75
- Valve Type: Ball
- Number of Ports: 3
from Qosina Corp.
Four-port Thru Flow Double Elbow Style Manifold, Barbed, Natural - 61963 [See More]
- Primary Material: PP; PP
- Media: Water; Air
from KZVALVE
1 1/2" Polypropylene, 3-way, side load, full port, stainless steel ball, FNPT, on-on diverter ball valve, rated for 125 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Diverter; Ball
- Valve Size: 1.50
from Western Analytical Products
. Solenoid operated isolation valves provide fast reliable response to meet continuous duty performance at low power levels. Inert flow path of PTFE provides the highest level of chemical compatibility. Two way NC or NO or Three way configuration. Designed for over 20 million cycles. Fast response... [See More]
- Primary Material: PP
- Actuation: Electric
- Valve Type: Isolation Valve
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.19 to 0.25
from GF Piping Systems
The new Generation Diaphragm Valve of GF Piping System sets new standards regarding safety, efficiency and simplicity. Instead of the commonly used four metal screws, it has a central union nut. This non-corrosive connection is characterized by homogeneous temperature behavior, even surface pressure... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Valve Size: 0.50 to 2.00
- Valve Type: Diaphragm
- Maximum Pressure: 240.00
from Cole-Parmer
Ball valves give you precise control over the entire 180 <deg > range. True union design lets you remove wetted parts. Valves have Viton <reg > body seals and seats. Less than 5" overall length. Calibrated in 5 <deg > increments. [See More]
- Primary Material: PP
- Valve Type: Ball
from U.S. Plastic Corporation
Valves have stainless steel bolts and are made of precision molded polypropylene. Polypropylene is reinforced with fiberglass for additional strength. The self-aligning ball moves freely against the PTFE seats for smooth operation. The ball is diamond turned, after molding, to make it spherically... [See More]
- Primary Material: PP
- Number of Ports: 3
- Valve Type: Ball
from Qosina Corp.
Check Valve, Barbed - 80512 [See More]
- Primary Material: PP; PP, Silicone
- Media: Water; Air
- Valve Type: Check
- Maximum Pressure: 0.50
from KZVALVE
1 1/2" Polypropylene, 3-way, bottom load, full port, stainless steel ball, on-on, FNPT, ball valve, rated for 125 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 1.50
from Western Analytical Products
Three way and two way isolation valves. [See More]
- Primary Material: PP
- Actuation: Electric
- Valve Type: Isolation Valve
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.19 to 0.38
from GF Piping Systems
The Type 522 Needle Valve may be used in a wide range of services where SYGEF ® is suitable in the chemical and general environmental limits of the installation. Specific applications should be evaluated on the basis of pressure, temperature and flow capacity desired. The ¼" and ⅜"... [See More]
- Primary Material: PP; PVDF
- Valve Size: 0.25 to 0.50
- Valve Type: Needle
- Maximum Pressure: 150.00
from Cole-Parmer
All valves have Viton <reg > diaphragms. [See More]
- Primary Material: PP
- Maximum Pressure: 100.00
- Valve Type: Check
- Flow (Cv): 8.00
from U.S. Plastic Corporation
Valves have stainless steel bolts and are made of precision molded polypropylene. Polypropylene is reinforced with fiberglass for additional strength. The self-aligning ball moves freely against the PTFE seats for smooth operation. The ball is diamond turned, after molding, to make it spherically... [See More]
- Primary Material: PP
- Number of Ports: 3
- Valve Type: Ball
from Qosina Corp.
Qosina offers a variety of valves that are in stock and ready for immediate delivery. Qosina part # 80363 is designed for applications that require inflation. Once activated by the stem of a male luer lock connection, this valve opens, allowing for the free flow of air or fluid. When disconnected,... [See More]
- Primary Material: PVC; PP; PVC, PP, Silicone
- Media: Water; Air
from KZVALVE
1 1/4" Polypropylene, 2-way, full port, stainless steel ball, FNPT, ball valve, rated for 125 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 1.25
from Western Analytical Products
. Adapt tubing outer diameter (OD) to manifold NPT ports with compression fittings. 1/4 and 1/2 NPT connections. Chemically resistant Polypropylene and Tefzel ®. For secure fluid connections to a manifold, select a fitting based on your tubing outer diameter (OD). Wrap NPT threads 3-4 times and... [See More]
- Primary Material: PP
- Valve Type: Relief
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.25 to 0.38
from GF Piping Systems
Ball Valves: The Type 230 Series Pneumatically Actuated Ball Valve from Georg Fischer is the ultimate choice for the high demands of the industrial world. It is available in PVC, CPVC, PP-H, and PVDF material. The valve can be configured for throttling or for simple open/close functionality. The... [See More]
- Primary Material: PVC; CPVC; PP; PVDF; ABS
- Valve Size: 0.38 to 12.00
- Valve Type: Ball; Butterfly
- Maximum Pressure: 150.00 to 232.00
from Cole-Parmer
• Use with liquids and gases for pressure or vacuum applications. • Breaking pressure is 0.18 psi, closing pressure is 0.014 psi. • Install in any position. <b >Note: </b > Valves require 1 psi back pressure for a tight seal. [See More]
- Primary Material: PP
- Maximum Pressure: 50.00
- Valve Type: Check
- Flow (Cv): 0.12
from U.S. Plastic Corporation
This lightweight hose end valve is for convenient transfer of liquids into drums, tanks, etc. It has a 90 angled end flange with 8" long polypropylene fill spout. Bolts are all stainless steel. The maximum operating pressure is 150 PSI. [See More]
- Primary Material: PP
from Qosina Corp.
Qosina offers a variety of valves that are in stock and ready for immediate delivery. Qosina part # 80360 is designed for applications that require inflation. Once activated by the stem of a male luer lock connection, this valve opens, allowing for the free flow of air or fluid. When disconnected,... [See More]
- Primary Material: PVC; PP; PP, PVC, Silicone
- Media: Water; Air
from KZVALVE
1" Polypropylene, 2-way, full port, stainless steel ball, FNPT, ball valve, rated for 150 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 1.00
from Western Analytical Products
When using a carboy or Justrite container is not economical or practical, it may be useful to dispose of solvent wastes into a standard laboratory bottle. For vapor control, attach an EF-100 vapor filter with filter adapter to one port when connecting solvent wastes. Most manifolds may also be used... [See More]
- Primary Material: PP
- Valve Type: Relief
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.19
from GF Piping Systems
The Pressure Retaining Valve V586 from GF Piping Systems serve to keep the working or system-related pressures constant, to balance out pressure pulsation and to reduce pressure peaks in chemical process systems. If the inlet pressure rises above the set value, the pressurized valve piston is lifted... [See More]
- Primary Material: PVC; CPVC; PP; PVDF
- Maximum Pressure: 150.00
- Valve Size: 0.38 to 2.00
- Connection Description: BoltFlange; Butt Weld; Socket Weld; Fusion
from Cole-Parmer
• Use with liquids and gases for pressure or vacuum applications. • Breaking pressure is 0.18 psi, closing pressure is 0.014 psi. • Install in any position. <b >Note: </b > Valves require 1 psi back pressure for a tight seal. [See More]
- Primary Material: PP
- Maximum Pressure: 50.00
- Valve Type: Check
- Flow (Cv): 0.11
from U.S. Plastic Corporation
These polypropylene check valves have a one piece construction. Valves are rated to 150 PSI maximum. They have a 1-2 PSI spring. Polypropylene is glass filled and the gasket materials is EPDM. Spring is made of 316 stainless steel. [See More]
- Primary Material: PP
- Valve Size: 1.00
- Valve Type: Check
from Qosina Corp.
Qosina offers a variety of valves that are in stock and ready for immediate delivery. Qosina part # 80361 is designed for applications that require inflation. Once activated by the stem of a male luer lock connection, this valve opens, allowing for the free flow of air or fluid. When disconnected,... [See More]
- Primary Material: PP; PP, Silicone
- Media: Water; Air
from KZVALVE
1" Polypropylene, 3-way, side load, full port, stainless steel ball, FNPT, on-on diverter ball valve, rated for 150 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Diverter; Ball
- Valve Size: 1.00
from Western Analytical Products
When using a carboy or Justrite container is not economical or practical, it may be useful to dispose of solvent wastes into a standard laboratory bottle. For vapor control, attach an EF-100 vapor filter with filter adapter to one port when connecting solvent wastes. Most manifolds may also be used... [See More]
- Primary Material: PP
- Valve Type: Relief
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.25
from Cole-Parmer
PVC and PP valves withstand up to 150 psi; PVDF up to 200 psi. Seats are made of PTFE and O-rings made of Viton <reg >. Pipe thread connections. [See More]
- Primary Material: PP
- Maximum Pressure: 150.00
- Valve Type: Needle
from U.S. Plastic Corporation
These polypropylene check valves have a one piece construction. Valves are rated to 150 PSI maximum. They have a 1-2 PSI spring. Polypropylene is glass filled and the gasket materials is EPDM. Spring is made of 316 stainless steel. [See More]
- Primary Material: PP
- Valve Size: 3.00
- Valve Type: Check
from Qosina Corp.
Qosina offers a variety of valves that are in stock and ready for immediate delivery. Qosina part # 80362 is designed for applications that require inflation. Once activated by the stem of a male luer lock connection, this valve opens, allowing for the free flow of air or fluid. When disconnected,... [See More]
- Primary Material: PVC; PP; PVC, PP, Silicone
- Media: Water; Air
from KZVALVE
1" Polypropylene, 3-way, bottom load, full port, stainless steel ball, ACeR ball, on-off, jet back to tank, FNPT, ball valve, rated for 150 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 1.00
from Western Analytical Products
When using a carboy or Justrite container is not economical or practical, it may be useful to dispose of solvent wastes into a standard laboratory bottle. For vapor control, attach an EF-100 vapor filter with filter adapter to one port when connecting solvent wastes. Most manifolds may also be used... [See More]
- Primary Material: PP
- Valve Type: Relief
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.19 to 0.25
from Cole-Parmer
Use elliptic valves for liquid, gas, and vacuum applications. Valves are easy to disassemble. Simply pull out the handle and push your stem through the bottom <emdash >allowing you to clean and maintain valves in-line. Four-position valves are clearly marked with flow patterns to ensure... [See More]
- Primary Material: PP
from U.S. Plastic Corporation
The Dry-Disconnect Ball Valves are designed for safe and easy spill free connections. The "double ball" design allows maximum flow, while the cam lever style of connection is the most recognized fluid connector. The handles interlock making it easy to identify which handle opens or closes first. No... [See More]
- Primary Material: PP
- Valve Type: Ball
from Qosina Corp.
Qosina offers a variety of valves that are in stock and ready for immediate delivery. Qosina part # 80063 is designed for applications that require inflation. Once activated by the stem of a male luer lock connection, this valve opens, allowing for the free flow of air or fluid. When disconnected,... [See More]
- Primary Material: Stainless Steel; PP; PP, Polyester, Nitrile, SS
- Media: Water; Air
from KZVALVE
2" Polypropylene, 2-way, full port, stainless steel ball, FNPT, ball valve, rated for 100 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 2.00
from Western Analytical Products
When using a carboy or Justrite container is not economical or practical, it may be useful to dispose of solvent wastes into a standard laboratory bottle. For vapor control, attach an EF-100 vapor filter with filter adapter to one port when connecting solvent wastes. Most manifolds may also be used... [See More]
- Primary Material: PP
- Valve Type: Relief
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.19 to 0.38
from Cole-Parmer
bull; Glass reinforced polypropylene (PP) body with a polysulfone ball and EPDM seals. • NSF 51 listed. • FDA compliant for contact with food. • All plastic design is leak free and corrosion resistant. Valve, Ball, Polypropylene, Female Connector 1 1/4'' push to connect tube, 1/8''... [See More]
- Primary Material: PP
- Valve Type: Ball
from U.S. Plastic Corporation
The Dry-Disconnect Ball Valves are designed for safe and easy spill free connections. The "double ball" design allows maximum flow, while the cam lever style of connection is the most recognized fluid connector. The handles interlock making it easy to identify which handle opens or closes first. No... [See More]
- Primary Material: PP
- Valve Type: Ball
from Qosina Corp.
Qosina offers an extensive line of luer-activated valves in a variety of configurations that are in stock and ready for immediate delivery. Ideal for use in applications that require inflation or deflation, Qosina part #80467 is a luer-activated valve, equipped with a female luer slip and 0.295 inch... [See More]
- Primary Material: PP; PC, Silicone, PP
- Media: Water; Air
from KZVALVE
2" Polypropylene, 3-way, bottom load, full port, stainless steel ball, on-on, FNPT, ball valve, rated for 100 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 2.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.25 to 0.38
from Cole-Parmer
bull; Glass reinforced polypropylene (PP) body with a polysulfone ball and EPDM seals. • NSF 51 listed. • FDA compliant for contact with food. • All plastic design is leak free and corrosion resistant. Valve, Ball, Polypropylene, Male Elbow 3/8'' push to connect tube, 1/2'' thread,... [See More]
- Primary Material: PP
- Valve Type: Ball
from U.S. Plastic Corporation
The Dry-Disconnect Ball Valves are designed for safe and easy spill free connections. The "double ball" design allows maximum flow, while the cam lever style of connection is the most recognized fluid connector. The handles interlock making it easy to identify which handle opens or closes first. No... [See More]
- Primary Material: PP
- Valve Type: Ball
from Qosina Corp.
Qosina offers an extensive line of luer-activated valves in a variety of configurations that are in stock and ready for immediate delivery. Ideal for use in applications that require inflation or deflation, Qosina part #80468 is a luer-activated valve, equipped with a 0.30 inch OD. Made of... [See More]
- Primary Material: PP; PP, Silicone
- Media: Water; Air
from KZVALVE
The NEW KZValve Tru-Torq Series is designed to mount directly to a KZValve EH Series actuator or be used as a premium quality manual valve. These consistently smooth operating valves are ready to work as hard as you do season after season. • 2" and 3" full port 2-way ball valves. • Valve... [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 2.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12
from Cole-Parmer
bull; Glass reinforced polypropylene (PP) body with a polysulfone ball and EPDM seals. • NSF 51 listed. • FDA compliant for contact with food. • All plastic design is leak free and corrosion resistant. Valve, Ball, Polypropylene, Male Elbow 1/4'' push to connect tube, 1/4'' thread,... [See More]
- Primary Material: PP
- Valve Type: Ball
from U.S. Plastic Corporation
The Dry-Disconnect Ball Valves are designed for safe and easy spill free connections. The "double ball" design allows maximum flow, while the cam lever style of connection is the most recognized fluid connector. The handles interlock making it easy to identify which handle opens or closes first. No... [See More]
- Primary Material: PP
- Valve Type: Ball
from Qosina Corp.
Qosina offers an extensive line of luer-activated valves in a variety of configurations that are in stock and ready for immediate delivery. Ideal for use in applications that require inflation or deflation, Qosina part #80470 is a luer-activated valve, equipped with a female luer slip and 0.25 inch... [See More]
- Primary Material: PVC; PP; PVC, Silicone, PP
- Media: Water; Air
from KZVALVE
The NEW KZValve Tru-Torq Series is designed to mount directly to a KZValve EH Series actuator or be used as a premium quality manual valve. These consistently smooth operating valves are ready to work as hard as you do season after season. • 2" and 3" full port 2-way ball valves. • Valve... [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 2.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.19
from Cole-Parmer
bull; Glass reinforced polypropylene (PP) body with a polysulfone ball and EPDM seals. • NSF 51 listed. • FDA compliant for contact with food. • All plastic design is leak free and corrosion resistant. Valve, Ball, Polypropylene, Male Elbow 1/4'' push to connect tube, 1/4'' thread,... [See More]
- Primary Material: PP
- Valve Type: Ball
from U.S. Plastic Corporation
The Dry-Disconnect Ball Valves are designed for safe and easy spill free connections. The "double ball" design allows maximum flow, while the cam lever style of connection is the most recognized fluid connector. The handles interlock making it easy to identify which handle opens or closes first. No... [See More]
- Primary Material: PP
- Valve Type: Ball
from Qosina Corp.
Qosina offers a variety of valves that are in stock and ready for immediate delivery. Qosina part # 80466 is designed for applications that require inflation. Once activated by the stem of a male luer lock connection, this valve opens, allowing for the free flow of air or fluid. When disconnected,... [See More]
- Primary Material: PVC; PP; PVC, PP, Silicone
- Media: Water; Air
from KZVALVE
3/4" Polypropylene, 2-way, full port, stainless steel ball, FNPT, ball valve, rated for 150 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 0.75
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.25
from Cole-Parmer
bull; Glass reinforced polypropylene (PP) body with a polysulfone ball and EPDM seals. • NSF 51 listed. • FDA compliant for contact with food. • All plastic design is leak free and corrosion resistant. Valve, Ball, Polypropylene, tube elbow union 1/4'' push to connect tube, 3/8''... [See More]
- Primary Material: PP
- Valve Type: Ball
from U.S. Plastic Corporation
Single Union Polypropylene Ball Valves features precision molded in glass reinforced polypropylene, for strength and chemical resistance. The PTFE seats assist with smooth operation and proper sealing characteristics; and EPDM O-rings to handle most fertilizers and many chemicals. Includes a Double... [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Ball
- Connection Description: Union
from Qosina Corp.
Qosina offers an extensive line of Check Valves, available in a variety of styles that are in stock and ready for immediate delivery. Made of polypropylene and silicone, Qosina part # 97351 is respiratory connector with a 22 mm ID inlet x 22 mm OD outlet. This valve provides directional flow of... [See More]
- Primary Material: PP; PP, Silicone
- Media: Water; Air
from KZVALVE
3/4" Polypropylene, 3-way, side load, full port, stainless steel ball, FNPT, on-on diverter ball valve, rated for 150 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Diverter; Ball
- Valve Size: 0.75
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.38
from Cole-Parmer
bull; Glass reinforced polypropylene (PP) body with a polysulfone ball and EPDM seals. • NSF 51 listed. • FDA compliant for contact with food. • All plastic design is leak free and corrosion resistant. Valve, Ball, Polypropylene, Union connector, 1/4'' push to connect tube, 1/4''... [See More]
- Primary Material: PP
- Valve Type: Ball
from U.S. Plastic Corporation
Polypropylene and Kynar housing with Viton diaphragm. Will work with vacuum between 2 and 29 in. Hg. and pressures from 1 psi up to 150psi. .5 lb. cracking pressure on all sizes and materials. [See More]
- Primary Material: PP
- Valve Size: 0.12
- Valve Type: Check
from Qosina Corp.
Qosina offers an extensive line of Check Valves, available in a variety of styles that are in stock and ready for immediate delivery. Made of polypropylene and silicone, Qosina part #97352 is respiratory connector with a 22 mm OD inlet x 22 mm ID outlet. This valve provides directional flow of gases... [See More]
- Primary Material: PP; PP, Silicone
- Media: Water; Air
from KZVALVE
3/4" Polypropylene, 3-way, bottom load, full port, stainless steel ball, ACeR ball, on-off, jet back to tank, FNPT, ball valve, rated for 150 psi at 70 ° F [See More]
- Primary Material: PP
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Ball
- Valve Size: 0.75
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Duckbill; Check
- Valve Size: 0.12 to 0.19
from Cole-Parmer
Valves feature a diaphragm made of Viton <reg >. Use to control your outlet pressure between 5 and 50 psig; up to 150 psig inlet. Ideal for your liquid applications. [See More]
- Primary Material: PP
from U.S. Plastic Corporation
Manual, 2-way, full port ball valve provides long working life and maintenance-free performance. True union permits radial installation or removal. Access to all components (ball, stem, seats and seals) is provided by removal of the left hand threaded seat carrier. The ergonomic handle has a... [See More]
- Primary Material: PP
- Valve Size: 0.38
- Valve Type: Ball
- Connection Description: Threaded; Union
from Qosina Corp.
Qosina is a leading supplier of Relief / Inflation Valve with 9/16 inch Diameter (14 mm), 1.9 - 2.3 psi CP. Get fast shipping and volume discounts on Relief Valves parts. [See More]
- Primary Material: Stainless Steel; PP; Acrylic, Al, PP, Silicone, SS
- Media: Water; Air
- Valve Type: Relief
- Maximum Pressure: 1.90 to 2.30
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Duckbill; Check
- Valve Size: 0.12 to 0.19
from Cole-Parmer
PP valve [See More]
- Primary Material: PP
- Maximum Pressure: 14.74 to 140.00
- Valve Type: Solenoid
- Flow (Cv): 1.10
from U.S. Plastic Corporation
Hayward NVA Series needle valves are used for accurate metering of fluids. Turning the thumbwheel moves a tapered piston into the PTFE seat to control the flow down to a few drops per minute. Precision molded, fine pitched stem threads permit this very fine metering flow control, flanges for panel... [See More]
- Primary Material: PP
- Valve Type: Needle
from Qosina Corp.
Qosina is a leading supplier of T Pressure Relief Valve with 0.25 inch OD x 0.281 inch OD x 0.25 inch OD, 2.5 psi, +/- 20% Crack Tolerance. Get fast shipping and volume discounts on Relief Valves parts. [See More]
- Primary Material: Stainless Steel; PP; PC, PP, Silicone, SS
- Media: Water; Air
- Valve Type: Relief
- Maximum Pressure: 2.50
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Duckbill; Check
- Valve Size: 0.12
from Cole-Parmer
bull; Fully drainable and easy to maintain!. • Eliminate leaks â € ”ideal for food or pharmaceutical processing. • Compatible with Tri-Clamp <reg > connections for easy maintenance, change out, and orientation â € ”no cutting or welding needed!. [See More]
- Primary Material: PP
- Maximum Pressure: 60.00 to 125.00
- Valve Type: Diaphragm
- Flow (Cv): 12.30
from U.S. Plastic Corporation
Hayward true check ball check valves with viton seals, NSF listed material and 150 PSI at 70 degrees F., prevent reversal of flow in piping systems. They are ideal where backflow could potentially cause damage to pumps, filters, or process equipment. Line pressure unseats the solid plastic ball to... [See More]
- Primary Material: PP
- Valve Size: 0.50
- Valve Type: Ball Check; Check
- Connection Description: Threaded; Union
from Qosina Corp.
Qosina is a leading supplier of T Pressure Relief Valve with 0.25 inch OD x 0.281 inch OD x 0.25 inch OD, 8 psi, +/- 25% Crack Tolerance. Get fast shipping and volume discounts on Relief Valves parts. [See More]
- Primary Material: Stainless Steel; PP; PC, PP, Silicone, SS
- Media: Water; Air
- Valve Type: Relief
- Maximum Pressure: 8.45
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Duckbill; Check
- Valve Size: 0.19
from Cole-Parmer
Valves with connections of 1/4" or 1/2" have a diaphragm made of Viton <reg > and withstand a maximum inlet pressure of 210 psig. All other valves have a PTFE shaft design and withstand a maximum inlet pressure of 140 psig. The shaft design prevents emergency shutdown with a three-seal system... [See More]
- Primary Material: PP
- Valve Type: Relief
from U.S. Plastic Corporation
This valve is 3/8" Thread Male Compression X 3/8" Thread Female Compression x 1/4" Tube OD. [See More]
- Primary Material: PP
- Connection Description: Tube Fitting
- Valve Size: 0.38
from Qosina Corp.
Qosina is a leading supplier of T Pressure Relief Valve with 0.250 inch OD x 0.281 inch OD x 0.250 inch OD, 30 psi, +/- 10% Crack Tolerance. Get fast shipping and volume discounts on Relief Valves parts. [See More]
- Primary Material: Stainless Steel; PP; PC, PP, Silicone, SS
- Media: Water; Air
- Valve Type: Relief
- Maximum Pressure: 30.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12
from U.S. Plastic Corporation
This valve is 1/2" Thread Male Compression X 3/8" Thread Female Compression x 1/4" Tube OD. The conversion adapters can be threaded to either side of the valve to make configurations of 1/2" x 1/2" NPS or 3/8" x 3/8" compression. [See More]
- Primary Material: PP
- Connection Description: Tube Fitting
- Valve Size: 0.50
from Qosina Corp.
Order T pressure relief valves at Qosina and get only what you need with our low $25-order minimum. Features a 9-12 psi tolerance. [See More]
- Primary Material: Stainless Steel; PP; PC, PP, Silicone, SS
- Media: Water; Air
- Valve Type: Relief
- Maximum Pressure: 9.00 to 12.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.19
from U.S. Plastic Corporation
This valve is 3/8" Thread Male Compression X 3/8" Thread Female Compression x 1/4" Tube OD. [See More]
- Primary Material: PP
- Connection Description: Tube Fitting
- Valve Size: 0.38
from Qosina Corp.
Get automatic relief when pressures rise too high by ordering and installing an 80194 T pressure relief valve from Qosina. The valve has an 18-psi tolerance. [See More]
- Primary Material: Stainless Steel; PP; PC, PP, Silicone, SS
- Media: Water; Air
- Valve Type: Relief
- Maximum Pressure: 18.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.25
from U.S. Plastic Corporation
This valve is 1/2" Thread Male Compression X 3/8" Thread Female Compression x 1/4" Tube OD. The conversion adapters can be threaded to either side of the valve to make configurations of 1/2" x 1/2" NPS or 3/8" x 3/8" compression. [See More]
- Primary Material: PP
- Connection Description: Tube Fitting
- Valve Size: 0.50
from Qosina Corp.
T Pressure Relief Valve [See More]
- Primary Material: Stainless Steel; PP; PC, PP, Silicone, SS
- Media: Water; Air
- Valve Type: Relief
- Maximum Pressure: 15.00
from ARKPLAS
All Ark-Plas ® Check Valve barbs are molded without a parting line. This means that every sealing surface on each barb is seamless all the way around, eliminating flash, or mold mismatch. Coupled with our high-quality manufacturing processes, a barb without a parting line helps to ensure a... [See More]
- Primary Material: PP
- Media: Air; Compressed Air
- Valve Type: Ball Check; Check
- Valve Size: 0.12 to 0.38