Cast Iron Industrial Valves
from RS Components, Ltd.
Valve 3Way Thread V311T/32/16 [See More]
- Primary Material: Cast Iron; Cast Iron
- Maximum Pressure: 58.00
- Valve Type: Globe
- Media Temperature: 248
from Kuriyama of America, Inc.
FEATURES AND ADVANTAGES. Designed for use in irrigation and other pumping applications. Prevents the backflow of liquid when pump is turned off. Prevents passage of contaminants to the pump caused by silt or sand in the water. MATERIAL SPECIFICATIONS. Cast iron material. Neoprene flapper valve... [See More]
- Primary Material: Cast Iron
- Valve Size: 1.50
- Valve Type: Foot Valve
- Maximum Pressure: 150.00
from McWane Plant and Industrial
Features & Benefits. Bronze or resilient seated. Working parts removable through top of valve for ease of maintenance. Stainless steel hinge pin. NSF/ANSI 61/372 Certified. Fusion bonded epoxy coated. ANSI B16 125# flange connection. Sizes 2 ”-12 ” 200 psi rated working pressure. [See More]
- Primary Material: Cast Iron; ASTM A126, Class B Cast Iron
- Valve Size: 2.00 to 30.00
- Valve Type: Check
- Maximum Pressure: 150.00
from Assured Automation
Description: The XLB is a PFA lined, Ductile Iron, ANSI Class 150 flanged Full Port Ball Valve. It can be equipped with a manual handle or with pneumatic or electric actuators. A full range of accessory items are available including limit switches, solenoid valves, positioners and manual override... [See More]
- Primary Material: Cast Iron; PTFE
- Media: Water; Gas; Specialty Corrosive; Chemical
- Valve Type: Ball; Sanitary
- Valve Size: 1.00 to 6.00
from Asahi/America, Inc.
Type-55 IS Butterfly Valve (2"- 16"). Type-55 IS butterfly valves are quarter-turn metal body valves with equal percentage type flow characteristics. They provide moderate flow control and, therefore, can be used for both ON/OFF and modulating service. The Type-55 IS butterfly valve features an... [See More]
-
Primary Material: Cast Iron;
Powder-coated finish ductile cast iron
- Valve Size: 2.00 to 16.00
- Valve Type: Butterfly
- Actuation: Manual
from DeZURIK, Inc.
Introduced and patented by Red Valve, the air -actuated Type A Pinch Valve offers a unique, cost-effective solution to flow control problems. More Red Valve Type A Valves are in use than any other Pinch Valve throughout the world. The secret is in the rubber sleeve - the valve ’s only wetted... [See More]
- Primary Material: Cast Iron
- Media: Air
- Valve Type: Pinch
from RS Components, Ltd.
G1/4 BSP pressure gauge isolator valve [See More]
- Primary Material: Cast Iron; Cast iron, steel
- Media: Hydraulic
- Valve Type: Shut Off
- Maximum Pressure: 5076.32
from Assured Automation
Description. Assured Automation's GH Series High Capacity General Purpose Globe Control Valves are constructed of rugged cast iron bodies. They are available with a variety of plug styles and trim materials to suit nearly any application. These valves provide excellent modulating control for... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Wastewater; Chemical
- Valve Type: Control Valve; Mixing; Globe
- Valve Size: 2.50 to 8.00
from Asahi/America, Inc.
Type-55 butterfly valves are quarter turn plastic valves with equal percentage type flow characteristics. They provide moderate flow control and therefore can be used for both on/off and modulating service. The Type-55 butterfly valve features an epoxy powder coated ductile cast iron body with PTFE... [See More]
-
Primary Material: Cast Iron;
Epoxy powder coated ductile cast iron
- Valve Size: 2.00 to 10.00
- Valve Type: Butterfly
- Actuation: Manual
from DeZURIK, Inc.
The Type A Megaflex is the most economical large-diameter automatic valve available. The Type A Megaflex Valve, available in sizes 20 ” to 84 ”, is extremely simple in design and principle. As with every Red Valve Pinch Valve, the elastomer sleeve is the only wearing part, drastically... [See More]
- Primary Material: Cast Iron
- Media: Air
- Valve Type: Pinch
from RS Components, Ltd.
3-port valve, flanged, PN10, DN50, kvs 4 [See More]
- Primary Material: Cast Iron; Cast Iron
- Media Temperature: 14 to 302
- Media: Hydraulic
from DeZURIK, Inc.
The Series 5800 Electric Actuated Control Valve is reliable, maintenance-free and cost effective. Replacing a plug valve, gate valve or ball valve is easy with the Series 5800 because it has the same face-to-face dimensions. There are no seats to grind, no stuffing box to repack and no packing gland... [See More]
- Primary Material: Cast Iron
- Connection Description: BoltFlange
- Valve Type: Control Valve; Pinch
from RS Components, Ltd.
3-port valve, flanged, PN16, DN65, kvs 6 [See More]
- Primary Material: Cast Iron; Cast Iron
- Media Temperature: 14 to 302
- Media: Hydraulic
from DeZURIK, Inc.
Red Valve's Series D Flexgate Valve is designed with a cast iron body or fabricated steel body, stainless steel gate and two heavy-duty elastomer cartridge slurry seats. The port is formed by two heavy-duty cartridge elastomer slurry seat halves. The cartridge slurry seats are available in various... [See More]
- Primary Material: Cast Iron; Stainless Steel
- Valve Type: Gate
from RS Components, Ltd.
VBF21.80 - Dreiweghahn, Flansch, PN6, DN [See More]
- Primary Material: Cast Iron; Cast Iron
- Maximum Pressure: 87.02
- Valve Size: 3.15
from DeZURIK, Inc.
Red Valve's Series D Flexgate Valves are available with pneumatic, electric or hydraulic actuators. Other options include limit switches, solenoids and air regulators. The actuated Flexgate Valve provides long-term abrasion resistance under high-cycle conditions. The valve self-cleans each time it... [See More]
- Primary Material: Cast Iron; Stainless Steel
- Valve Type: Gate
from RS Components, Ltd.
Siemens VBF21.50 / BPZ:VBF21.50 [See More]
- Primary Material: Cast Iron; Cast Iron
- Media: Air
- Valve Type: Control Valve
- Maximum Pressure: 116.03
from DeZURIK, Inc.
The Series 75 Manual Pinch Valve is the number one selling pinch valve in the world today. The Series 75 is a reliable, maintenance-free, cost-effective valve designed for tough slurries, abrasives and corrosive-chemical applications. The Series 75 full-port design eliminates any dead spots or... [See More]
- Primary Material: Cast Iron
- Connection Description: BoltFlange
- Valve Type: Pinch
from RS Components, Ltd.
Siemens VXF22.65-63 / S55200-V117 [See More]
- Primary Material: Cast Iron; Cast Iron
- Media: Air
- Valve Type: Control Valve
- Maximum Pressure: 87.02
from DeZURIK, Inc.
Megaflex Series 75 Manual Pinch Valves are ideal for reliable operation, long life, and low maintenance. The valves are constructed with a fabricated steel body. A double acting ACME threaded pinch mechanism closes the sleeve on centerline. Red Valve Megaflex Series 75 Manual Pinch Valves maintain a... [See More]
- Primary Material: Cast Iron
- Connection Description: BoltFlange
- Valve Type: Pinch
from RS Components, Ltd.
Siemens VXF42.50-40 / S55204-V137 [See More]
- Primary Material: Cast Iron; Cast Iron
- Media: Air
- Valve Type: Control Valve
- Maximum Pressure: 232.06
from DeZURIK, Inc.
The Series 75B Manual Pinch Valve is a reliable, maintenance-free, cost-effective valve designed for tough slurries and abrasive and corrosive chemical applications below ground. This pinch valve was designed specifically for underground service. It is sealed with an epoxy coating and provides... [See More]
- Primary Material: Cast Iron
- Connection Description: BoltFlange
- Valve Type: Pinch
from RS Components, Ltd.
Siemens VXF42.80-100 / S55204-V141 [See More]
- Primary Material: Cast Iron; Cast Iron
- Media: Air
- Valve Type: Control Valve
- Maximum Pressure: 232.06
from DeZURIK, Inc.
The Series 39 Slurry Check Valve is designed to handle abrasive slurries, sewage, sludge and other difficult services. At the heart of the Series 39 Check Valve is a fabric-reinforced elastomer check sleeve that provides thru-flow at minimum pressure drop across the valve at all times. Forward... [See More]
- Primary Material: Cast Iron
- Valve Type: Check
from RS Components, Ltd.
Siemens M3P80FY / BPZ:M3P80FY [See More]
- Primary Material: Cast Iron; Cast Iron
- Media: Air
- Valve Type: Solenoid
- Number of Ports: 2
from DeZURIK, Inc.
DeZURIK ’s KUL Urethane Lined Knife Gate Valves are designed for on-off applications of abrasive slurry and dry abrasive materials. KUL valves are available in sizes 2-48 ″ (50-1200mm) and feature a one-piece, cast-in-place bonded liner that provides bi-directional, drip-tight shutoff to... [See More]
- Primary Material: Cast Iron; Ductile Iron; Stainless Steel
- Maximum Pressure: 150.00 to 250.00
- Valve Type: Gate
- Media Temperature: -20 to 266
from XOMOX (A Crane Co. Company)
XOMOX centric design Resilient Seated Butterfly Valves are used in demanding service applications and are a reliable, low maintenance shut-off and control valves. Our valves are designed for use in gas and liquid pipelines, to a maximum working pressure of 230psi. They are equipped to handle an... [See More]
- Primary Material: Cast Iron; Ductile Iron (optional feature)
- Valve Size: 2.00
- Valve Type: Butterfly
- Number of Ports: 2
from Danfoss A/S
VFY-LG (lug type) and VFY-WG (wafer type) are butterfly valves with gearbox suitable for district heating applications. [See More]
- Primary Material: Cast Iron
- Valve Size: 1.97 to 13.78
- Valve Type: Butterfly
- Maximum Pressure: 232.06
from Clark Solutions
Clark Globe Valves 1/2"through 2"are bronze body, NPT screw type, and are rated for ANSI Class 250 working pressure. The operating temperature range (of the controlled medium) limits are 20 ° to 250 °F. Valve stems are stainless steel and valve plugs are brass for water service and brass or... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Steam
- Valve Type: Globe
- Valve Size: 3.00
from Xiamen Landee Industries Co., Ltd.
Butterfly Valves Lined PTFE with Applicable Temperature of -40 to +230 Degrees Celsius. Model Number: LD 006-BT/PTFE. Key Specifications/Special Features: Body materials: cast iron, ductile iron, carbon steel and stainless steel. Manufacturing standards: API, ANSI, BS, DIN and JIS. Sealing:... [See More]
- Primary Material: Cast Iron; Ductile Iron; Stainless Steel; Steel; Carbon Steel
- Valve Size: 1.50 to 12.00
- Valve Type: Butterfly
- Media Temperature: -40 to 446
from KSB AG
Design. Balancing valve with electronic sensor for flow and fluid temperature measurement with BOATRONIC M-2 measuring computer for hydraulic balancing with short-term measurement, with BOATRONIC M-420 for analog signal transfer, e.g. to a control room. Independent of minimum differential pressures;... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Metal Seated; Globe
- Valve Size: 0.59 to 13.78
from NIBCO INC.
Cast Iron Butterfly Valves (Economy Line) for use in commercial and light industrial applications. Hot and cold domestic water, HVAC, Condenser and chilled water. Butterfly valves provide bi-directional dead-end service in commercial and industrial service. To make your selection easier, NIBCO... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Butterfly
- Valve Size: 2.00 to 12.00
from Mueller Company
Catalog number –. A-2361-20 Mechanical joint ends (with accessories unassembled). A-2361-23 Mechanical joint ends (less accessories). A-2361-25 Mechanical joint ends (with transition gaskets accessories unassembled). • Sizes – 4", 6", 8", 10", 12". • Meets or exceeds all... [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Gate
- Valve Size: 14.00 to 36.00
from FLSmidth
FLSmidth Type SK One-Way Cutoff Valves are designed to provide a positive cut-off and seal for pressure and vacuum pneumatic conveying lines. The valves can be used at inlet and outlet locations on conveying pressure tanks. The cut-off valve can also be used on branched systems to permit selection... [See More]
- Primary Material: Cast Iron
- Media: Powder Solids
- Valve Type: Diverter
- Valve Size: 3.00 to 6.00
from Prince Manufacturing Corp.
FUNCTION. The PRINCE valve model DRV is a differential poppet type double relief. This valve uses the same relief cartridge as the model RV. The double relief is used in systems that require cross over relief protection such a reversible hydraulic motor, or systems that require a cushion valve such... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Relief; Differential Poppet
- Maximum Pressure: 3000.00
from Milton Roy
Pinch valves control the flow of fluids (liquid, gas or power) and provide a leak-proof seal when closed. They are cost-effective, simple to install and require little maintenance. The valves are made up of a valve body and a cylindrical sleeve reinforced with natural or synthetic rubber. Typically... [See More]
- Primary Material: Aluminum; Cast Iron; PVC
- Media: Water; Gas; Powder Solids
- Valve Type: Pinch
from KITZ Corporation of America
KITZ offers cast iron valves cast at KITZ's in-house foundry. KITZ's cast iron valves boast high casting quality based on our long years of manufacturing experience and our unique production technology [See More]
- Primary Material: Cast Iron
- Connection Description: BoltFlange
- Valve Type: Swing (optional feature); Ball (optional feature); Check (optional feature); Gate (optional feature); Globe (optional feature)
from Alfa Laval Inc.
The Unique Diaphragm Valve UltraPure meets the requirements of most sterile and ultra-hygienic processes. These compact, lightweight valves are modular in design, which enables a wide range of purpose-built configurations. Superior hygienic design. Alfa Laval diaphragm valves is the natural choice... [See More]
- Primary Material: Cast Iron; Ductile Iron
- Valve Size: 0.25 to 3.00
- Valve Type: Diaphragm
- Maximum Pressure: 0.00 to 145.00
from G.I.E. Inc.
Automatic Diaphragm Valves — Standard Actuator. The GIE, Inc. broad line of diaphragm valves is widely applied throughout the chemical, food, paper, steel, mining, pharmaceutical, and other process industries wherever positive shut-off, non-contamination, or ease of maintenance is required. [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Control Valve (optional feature); Metal Seated; Diaphragm; Shut Off
- Valve Size: 0.50 to 8.00
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Air; Breathable; Chemical (optional feature)
- Valve Type: Ball Check; Check; Globe
- Valve Size: 2.00 to 30.00
from BI-TORQ® Valve Automation
AUTOMATED CAST IRON BUTTERFLY VALVES. BY-SERIES FEATURES. Wafer and lug style cast iron BFVs. 2" through 12" sizes standard. SS stem and disc as standard. EPDM, BUNA-N and Viton seats. Direct mount for low-profile, cost-efficient operation. Options for pneumatic, electric or gear operators. Designed... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Salt Water; Wastewater; Air; Compressed Air
- Valve Type: Butterfly
- Valve Size: 2.00 to 12.00
from Watts
Series G4000 2-Piece, Full Port, Cast Iron Flanged Ball Valves are used in commercial, industrial, and process applications. It features a stainless steel ball and stem, PTFE seats and packing, cast iron gear operator, and a ductile iron handwheel. Series G4000 has quarter turn operation and... [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Ball
- Valve Size: 8.00 to 10.00
from Flomatic Valves
208 - Cast iron body with epoxy coating and clean-out port. Threaded female x female connection. Features NITRILE (Buna-N) “Sinking Ball ”. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Primary Material: Cast Iron
- Valve Size: 1.25 to 2.00
- Valve Type: Ball Check; Ball; Check
- Maximum Pressure: 150.00
from ACS Valves
Features & Benefits: Available in 9 heights, from 13" to 49 1/2"; and 9 flange diameters from 4" to 22". Rotor with flex-tip wiper vanes produces static pressures up to 18" WG. EPDM synthetic wiper vanes resist material abrasion; extend maintenance cycles. Industrial-duty housing constructed of... [See More]
- Primary Material: Cast Iron; Stainless Steel (optional feature)
- Media: Powder Solids
- Valve Type: Metering
- Valve Size: 4.00 to 30.00
from Bray Commercial
Bray ’s NY and AB series resilient seated butterfly valves set the design standard for quality, reliability and long life in a wide variety of HVAC applications. Specifically designed for automated applications on chilled water, hot water and condenser water, all AB and NY series automated... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Steam; 50/50 Glycol Solutions
- Valve Type: Butterfly
- Valve Size: 2.00 to 20.00
from Seetru Limited
Minimum Pressure Check Valves are control valves typically suitable for application on compressors. Design. Minimum pressure check valves are spring loaded pressure control valves with an inbuilt check (non-return) valve. They are usually fitted to the AIR/OIL separator tank. Valve Opening. The... [See More]
- Primary Material: Cast Iron
- Maximum Pressure: 33.00 to 200.00
- Valve Type: Check
- Media Temperature: 356
from KZVALVE
The KZValve Butterfly Valves are engineered for actuation and designed to work with the KZValve actuators. These reliable valves are proven performers season after season. • 2" and 3" cast iron valves. • 4" and 5" aluminum valves. • Disk: 316 stainless steel. • Stem: 316... [See More]
- Primary Material: Cast Iron
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Butterfly
- Valve Size: 2.00
from Crane Fluid Systems
Fully lugged for secure installation. Rated to PN25. For flow regulation and isolation. [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Butterfly
from Honeywell International, Inc.
2 WAY GLOBE VALVE TYPE. INCH NOMINAL SIZE. ANSI 125 APPLICABLE STANDARD. WATER, STEAM, GLYCOL APPLICATION. 1.5 NOMINAL SIZE IN MM. 32 TO 337 DEG F TEMPERATURE RATING. CAST IRON BODY MATERIAL. MOTOR EXCLUSIONS. 1 1/2 INCH FNPT X 1 1/2 INCH FNPT END CONNECTION. 5 1/2 INCH END TO END DISTANCE. NOMINAL... [See More]
- Primary Material: Cast Iron
- Media Temperature: 32 to 337
- Valve Type: Control Valve
- Connection Description: Threaded; 1 1/2 INCH FNPT X 1 1/2 INCH FNPT
from Spirax-Sarco
The CA10S is a float type automatic liquid drain trap for air and gas systems. It has a cast iron body and cover with stainless steel valve head for use on high temperature or where corrosive condensate would adversely affect a rubber valve. [See More]
- Primary Material: Cast Iron
- Media: Steam; Air
- Valve Type: Drain
- Valve Size: 0.50
from Bell & Gossett, a xylem brand
Pressure Independent Control Valves combine easy field adjustability with excellent flow control, making them the ideal energy efficient solution for your HVAC system. The unique GPM dial makes setting and changing the maximum flow a breeze. And the innovative valve design provides full stroke... [See More]
- Primary Material: Brass / Bronze; Cast Iron
- Media: Water; Potable Water
- Valve Type: Control Valve; Globe
- Valve Size: 0.50 to 6.00
from Ames Fire & Waterworks
Series ACVW-125 Cast Iron Silent Check Valves are designed to prevent water hammer effect. The conical spring design allows the closure disc to travel more distance than other valves of this style, allowing a greater flow coefficient (Cv). Series ACVW-125 can be installed in either the horizontal or... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Potable Water
- Valve Type: Check
- Valve Size: 2.00 to 10.00
from Gemu Valves
Construction. The GEMU 312/314 pneumatically operated 3/2-way valves have a rugged low maintenance aluminium piston actuator. GEMU 312 is flanged, GEMU 314 has threaded sockets. The connection for the control medium can be rotated through 360 °. The double sided valve plug is connected to the... [See More]
- Primary Material: Cast Iron
- Media: Gas; Natural Gas; Sour Gas; Corrosive, Inert, Gaseous & Liquid Media; Air; Compressed Air; Chemical
- Valve Type: Globe
- Maximum Pressure: 29.01 to 232.06
from Curtiss-Wright, Valve Group
Shut Off Cock and Reversing Cock (3-way-cock) with lubrication system, approved stem sealing system in accordance with TA-Luft. Especially for coke oven gas in coke oven plants, battery heating system. Curtiss-Wright Shut off cock valves are supplied through their Phonix manufacturing facilities. [See More]
- Primary Material: Cast Iron
- Media: Gas; Coke Oven Gas
- Valve Type: Control Valve; Shut Off
- Valve Size: 2.50 to 12.00
from Radwell International
DISCONTINUED BY MANUFACTURER, BUTTERFLY VALVE, RESILIENT SEATED, LUG, DN 10/NPS 3, CAST IRON, STAINLESS STEEL DISC AND SHAFT, KEYS ON MOUNT, STANDARD TUBE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron; Stainless Steel; Steel
- Connection Description: Tube Fitting
- Valve Type: Butterfly
from McLellan
We offer a fully adjustable water distribution valve that is normally closed, affording control of the angle of the water from 0 ° to 180 ° and the thickness of the water. [See More]
- Primary Material: Cast Iron
- Flow (Cv): 300.00
- Media: Water
from DMN, Incorporated
The BTD ball type diverter has been specifically designed to converge or diverge abrasive products in pneumatic conveying systems. The diverter is also suitable for systems having relatively high pressures and temperatures, e.g. thermoelectric power stations (coal and fuel oil ash), incinerators,... [See More]
- Primary Material: Cast Iron
- Media: Powder Solids
- Valve Type: Diverter
- Valve Size: 2.36 to 9.84
from Armstrong International
Armstrong ’s Condensate Cooler mixes hot condensate or hot water with a cold water supply to reduce the temperature to acceptable drain temperatures as required by city and state codes. It is a pre-assembled package that is suitable for any plumbing system. When hot condensate or hot water is... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Mixing
- Valve Size: 1.50
from Watson McDaniel Company
The HD or D Regulator with the “A ” Air Pilot is used for reducing steam pressure on steam mains and process equipment. The “A ” Air Pilot can also be used in conjunction with the PTR and PTL Pneumatic Controller for controlling temperature in process applications. The... [See More]
- Primary Material: Cast Iron
- Media: Steam; Air
- Valve Type: Metal Seated
- Valve Size: 0.50
from General Pump
Industrial pneumatic valve. Features. Available in 3 versions according to pressure and volume required. Allows remote control of the water pressure. Allows off-load start up. When there is no air pressure water flows through the by-pass without pressure. No discharge leakage in bypass. Suitable for... [See More]
- Primary Material: Aluminum; Cast Iron
- Valve Size: 1.50
- Media: Water; Hot Water; Cold Water
- Maximum Pressure: 4350.00
from CIRCOR Energy
CIRCOR Energy Butterfly Valves are economical in design and light in weight. This type of valve is typically used for isolating or regulating flow in low pressure industrial fluids, steam lines and water systems, e.g. oil, ethanol, water etc. Our double offset high-performance wafer or lug design... [See More]
- Primary Material: Cast Iron
- Valve Size: 2.00 to 36.00
- Valve Type: Butterfly
- Maximum Pressure: 200.00
from ASCO
The normally closed H118 is a combination Hydramotor actuator and safety shutoff/control gas valve. It is used for commercial and industrial burners in applications such as furnaces, dryers, dehydrators, conversion burners and heaters. The cast iron, globe-type valve body features a soft synthetic... [See More]
- Primary Material: Cast Iron
- Media: Gas; Gasoline / Diesel Fuel
- Valve Type: Shut Off
- Valve Size: 1.00
from Red Valve Company, Inc.
The Series 5800 Electrically Actuated Control Valve is reliable, maintenance-free, and cost effective. Replacing a plug valve, gate valve, or ball valve is easy with the Series 5800 because it has the same face-to-face dimensions. There are no seats to grind, no stuffing box to repack, and no... [See More]
- Primary Material: Aluminum; Cast Iron; Rubber; Sleeve Options: Gum Rubber, EPDM, Neoprene, Hypalon, Buna-N, Viton
- Media: Water; Ground Water; Wastewater; Powder Solids; Slurries
- Valve Type: Control Valve; Pinch
- Valve Size: 1.00 to 12.00
from Rotolok Valves, Inc.
Roundhead valves are used in the bulk handling field as on/off controls for powder, pellets or granules falling under gravity from one discharge point to another. They are designed specifically to give a full bore opening in pressure applications and are particularly suited to handling abrasive... [See More]
- Primary Material: Cast Iron
- Media: Powder Solids; Pellets or Granules
- Valve Type: Dome
- Valve Size: 4.00 to 16.00
from Western Integrated Technologies
Built-In, full-flow relief valves. Parallel and series circuits in one bank. Manual, hydraulic, electric or pneumatic operation. Sectional construction for maximum flexibility. Spool changeover capability for right or left hand valve assemblies [See More]
- Primary Material: Cast Iron
- Media: Hydraulic
- Valve Type: Control Valve; Directional
- Maximum Pressure: 2500.00
from Victaulic Co. of America
Valve design, materials, and testing conform to the requirements of AWWA C-508 for water and wastewater treatment services. Sizes from 3 - 12 ″ | DN80 - DN300. Pressures up to 175 psi | 1 207 kPa | 12 bar [See More]
- Primary Material: Cast Iron
- Media: Water; Wastewater
- Valve Type: Check
- Valve Size: 3.00 to 12.00
from Danfoss A/S
VFY-LH (lug type) and VFY-WH (wafer type) are butterfly valves with handlever suitable for district heating applications and dedicated to industrial process applications. [See More]
- Primary Material: Cast Iron
- Valve Size: 0.98 to 11.81
- Valve Type: Butterfly
- Maximum Pressure: 232.06
from Clark Solutions
Model 1365 three-way solenoid valves are available in brass, iron or 304 stainless steel bodies. A variety of seal and seat materials including Acrylo-Nitrile, Neoprene ®, Ethylpropylene and Viton ® satisfy many general industry applications. The valves employ a direct acting solenoid. A... [See More]
- Primary Material: Brass / Bronze; Cast Iron; Stainless Steel
- Media: Water; Hot Water; Gas; Air
- Valve Type: Directional; Solenoid; Spool
- Valve Size: 0.07 to 0.16
from Xiamen Landee Industries Co., Ltd.
Butterfly Valve with Cast Iron Body, and white coating. Model Number: LD 018-BT8. Key Specifications/Special Features: Manufacturing standards: API, ANSI, BS, DIN, and JIS. Sealing: metal-seated, resilience-seated. Size range: from 1 1/2-inch to 24 inch (DN4 to DN600mm). Pressure: from PN0.6 to... [See More]
- Primary Material: Cast Iron
- Valve Size: 1.50 to 24.00
- Valve Type: Metal Seated; Butterfly
- Maximum Pressure: 87.02 to 232.06
from KSB AG
Design. Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU). With lever or manual gearbox. Semi-lug type body (type T2), suitable for downstream dismantling and dead-end service. Valve disc made of nickel-coated nodular cast iron. Connections to EN... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Butterfly
- Valve Size: 0.79 to 11.81
from NIBCO INC.
Cast Iron Check Valves for use in commercial and industrial applications. Typical services include: hot and cold water, HVAC, steam, gas and other general utility services. 3% Nickel services the pulp and paper industry. 125 psi/8.6 bar saturated steam to 353 °F/178 °C, 200 psi/13.8 bar... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Steam
- Valve Type: Ball Check (optional feature); Swing; Check
- Valve Size: 2.00 to 36.00
from Mueller Company
bull; Catalog number – A-2361-6 flanged ends. • Sizes – 4", 6", 8", 10", 12". • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL. Listed, FM Approved, and certified to ANSI/NSF 61 & 372. • Flanged end drilling complies with ANSI B16.42 Class... [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Gate
- Valve Size: 14.00 to 36.00
from FLSmidth
The new 2-way SK Valve offers a larger hinged access port that gives full access to the internals. Replaceable hard seats are now pre-mounted in a cartridge that makes replacements very simple. Hand, Air & motor actuators are available in sizes 3" to 14". [See More]
- Primary Material: Cast Iron
- Media: Powder Solids
- Valve Type: Diverter
- Valve Size: 3.00 to 14.00
from Prince Manufacturing Corp.
FUNCTION. The PRINCE valve model DS is a manual 6-way 2 position double selector valve. This valve will divert the flow going to two separate hydraulic circuits. For example two double acting cylinders or two reversible hydraulic motors can be operated by one four-way valve. When the double selector... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Spool
- Valve Size: 0.75
from G.I.E. Inc.
Mounts horizontally or vertical, excellent solids handling, tight shut-off. Cast body and molded lining. [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Metal Seated; Ball Check; Check
- Valve Size: 0.50 to 8.00
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Used extensively in pump suction and discharge applications. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Air; Breathable; Chemical (optional feature)
- Valve Type: Ball Check; Check; Globe
- Valve Size: 2.00 to 30.00
from BI-TORQ® Valve Automation
Our unique tee-linkages utilize quality products and superior engineering to create an economic and effective 3-way assembly. Ideal for HVAC and diverting applications, our tee-linkage assembly is a big cost saver over expensive three-way ball valves. All of our assemblies come complete with... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater; Hydrocarbons; Air; Compressed Air; Chemical
- Valve Type: Butterfly
- Valve Size: 2.00 to 12.00
from Watts
Series G4000M1 2-Piece, Full Port, Cast Iron Flanged Ball Valves are used in commercial HVAC and steam applications. It features a 125psi steam rating, stainless steel ball and stem, PTFE seats and packing, a steel-plated stop plate, and a ductile iron handle. Series G4000M1 has quarter turn... [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Ball
- Valve Size: 2.00 to 6.00
from Flomatic Valves
302BT - Epoxy coated ductile iron, foot valve with a globe style body design for use with class 150 flanges. Unleaded bronze trim with an EPDM seal and 316 stainless steel strainer for 2" - 12" sizes. Stainless Steel trim and resilient seat standard on 16", 20", 24" sizes (ST Models). Available on... [See More]
- Primary Material: Cast Iron; Ductile Iron
- Valve Size: 2.00 to 24.00
- Valve Type: Foot Valve; Check
- Maximum Pressure: 180.00
from ACS Valves
Features & Benefits: For high bulk density materials; a proprietary, dual-induction endplate design introduces pressurized air from both endplates into rotor pockets to provide highly efficient, air-assisted material introduction. Available in 4 heights, from 17 1/2"H to 21 1/8"H; and 4 flange... [See More]
- Primary Material: Cast Iron; Stainless Steel (optional feature)
- Media: Powder Solids
- Valve Type: Metering; Double Flap Airlock / Flap
- Number of Ports: 2
from Bray Commercial
The Auto Touch Independent Max (ATiMX) valve brings pressure independent control technology to valves up to 6" and flow rates up to 468 GPM. It is a stateof-the-art control valve combining a high quality/high rangeability temperature control valve with a dynamically balanced flow regulator in the... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; 50/50 Glycol Solutions
- Valve Type: Control Valve; Ball
- Valve Size: 2.50 to 6.00
from KZVALVE
2" Cast iron butterfly valve, EPDM seats, stainless steel disk, stainless steel valve stem, rated for 150 psi at 70 ° F [See More]
- Primary Material: Cast Iron
- Media: Water; Gas; Oil; Air
- Valve Type: Control Valve; Butterfly
- Valve Size: 2.00
from Crane Fluid Systems
Features & Benefits. Crane cast iron globe valves are highly efficient for throttling because seat and disc designs provide flow characteristics with proportionate relationships between valve lift and flow rate [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Globe
from Honeywell International, Inc.
4 WAY MIXING VALVE TYPE. 3/4 INCH NOMINAL SIZE. WATER, GLYCOL, BOILER APPLICATION. 36 TO 230 DEG F TEMPERATURE RATING. CHROME PLATED CAST IRON BODY MATERIAL. 3/4 INCH FNPT X 3/4 INCH FNPT X 3/4 INCH FNPT X 3/4 INCH FNPT END CONNECTION. V5442N MODEL [See More]
- Primary Material: Cast Iron
- Valve Size: 0.75
- Valve Type: Control Valve
- Media Temperature: 36 to 230
from Spirax-Sarco
The SV73 cast iron series valves are built in conformance to Section I and VIII of the ASME Boiler and Pressure Vessel Code. They are primarily intended for use on power boilers and unfired pressure vessels where ASME Section I and VIII stamped valves are required. [See More]
- Primary Material: Cast Iron
- Media: Steam
- Valve Type: Safety
- Valve Size: 1.50 to 8.00
from Gemu Valves
Construction. The GEMU 514 pneumatically operated 2/2 way angle seat globe valve has a low maintenance aluminium piston actuator. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. The wiper ring... [See More]
- Primary Material: Cast Iron
- Media: Gas; Natural Gas; Sour Gas; Corrosive, Inert, Gaseous & Liquid Media; Air; Compressed Air; Chemical
- Valve Type: Globe
- Valve Size: 0.59 to 3.15
from Radwell International
DISCONTINUED BY MANUFACTURER, BUTTERFLY VALVE, SERIES 900, FIGURE 990, 6 INCH, CAST IRON BODY, 316 SS DISC, 316 SS STEM, EPDM SEAT, ASME 125. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron
- Valve Type: Butterfly
from McLellan
We offer a fully adjustable water distribution valve that is normally closed, affording control of the angle of the water from 0 ° to 180 ° and the thickness of the water. [See More]
- Primary Material: Cast Iron
- Flow (Cv): 250.00
- Media: Water
from Armstrong International
The GD-6N and GD-6 are compact, direct-acting diaphragm valves ideal for low-flow applications, including laundry/dry-cleaning equipment, hospital equipment, tire/plastic molds and food processing. Lightweight and compact, the valves require no external sensing lines or additional parts. An external... [See More]
- Primary Material: Cast Iron
- Media: Steam; Air
- Valve Type: Control Valve; Metal Seated; Diaphragm; Relief
- Valve Size: 0.38 to 1.00
from General Pump
Industrial Pneumatic Valve, with and without check valve. Features. Available in 2 versions according to pressure and volume required. Allows remote control of the water pressure. Allows off-load start up. When there is no air pressure water flows through the by-pass without pressure. No discharge... [See More]
- Primary Material: Aluminum; Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Check (optional feature)
- Valve Size: 0.25 to 1.50
from CIRCOR Energy
CIRCOR Energy continuously provides the industry with technically superior products oriented toward applications that can be exceptionally severe. And today, we produce a comprehensive portfolio of check valve configurations and materials that provide opportunities to service customers in many... [See More]
- Primary Material: Cast Iron; Stainless Steel (optional feature); Steel (optional feature)
- Media: Wastewater
- Valve Type: Ball Check (optional feature); Swing (optional feature); Wafer (optional feature); Check
- Valve Size: 1.00 to 72.00
from ASCO
These normally closed, cast iron body, fuel gas shutoff valves are ideal for large commercial and industrial boilers and many process heating applications. High pressure/high flow. Pipe connections from 2" to 6". These valves close in less than 1 sec when power is removed. [See More]
- Primary Material: Cast Iron
- Media: Gas; Gasoline / Diesel Fuel
- Valve Type: Shut Off
- Valve Size: 2.00
from Red Valve Company, Inc.
The Red Valve Series G Knife Gate Valve features a cast iron body with stainless steel wetted parts. This efficient valve design affords the user a high-quality valve in which all the wetted parts, including the gate, seat, pack ing gland and flange face are stainless steel while providing cost... [See More]
- Primary Material: Cast Iron; Stainless Steel
- Media: Water; Ground Water; Wastewater; Slurries
- Valve Type: Gate
- Valve Size: 2.00 to 24.00
from Victaulic Co. of America
Valve performs presetting, measuring, isolating, filling and draining system functions. Preset memory position to achieve system balance. Sizes from DN65 – DN300 | 2 ½ – 12 ″. Pressure dependent upon coupling selection. Regional availability, contact Victaulic for details [See More]
- Primary Material: Cast Iron
- Valve Size: 2.50 to 12.00
- Valve Type: Balancing
from Clark Solutions
Clark offers a complete line of Butterfly valves for both commercial and industrial applications. The valves are designed for hot and chilled water, as well as steam applications up to 10 PSI saturated steam inlet. The valves can be used for on/off or throttling control, isolation, flow balance,... [See More]
- Primary Material: Aluminum; Cast Iron; Ductile Iron (optional feature); Steel
- Media: Water; Hot Water; Cold Water ; Steam
- Valve Type: Butterfly
- Valve Size: 2.00 to 20.00
from Xiamen Landee Industries Co., Ltd.
Cast Iron Ball Valve with International Standards, Made of Stainless Steel and Carbon Steel Material. Model Number: LD 004-CIBV Key Specifications/Special Features:Working pressure: PN10, PN16Size range: from 1/2 inch to 64 inchesBody materials: cast iron, ductile iron, aluminum bronze, stainless... [See More]
- Primary Material: Cast Iron
- Media: Water; Gas; Oil
- Valve Type: Ball
- Valve Size: 0.50 to 64.00
from KSB AG
Design. Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU or Nitrile K). With lever, manual gearbox or pneumatic actuator. Semi-lug type body (T2), suitable for downstream dismantling and dead-end service. Valve disc made of stainlesssteel 1.4308. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Butterfly
- Valve Size: 0.79 to 23.62
from NIBCO INC.
Cast Iron Gate Valves for use in commercial and industrial applications. Typical services include: hot and cold water, HVAC, steam, gas and other general utility services. 3% Nickel services the pulp and paper industry. Gate valves are multi-purpose bi-directional shutoff valves for commercial and... [See More]
- Primary Material: Cast Iron
- Media: Steam
- Valve Type: Gate; Shut Off
- Valve Size: 2.00 to 24.00
from Mueller Company
bull; Meets or exceeds all applicable requirements of ANSI/AWWA C508 Standard. • Flanged end dimensions and drilling comply with ANSI B16.1, class 125. • Iron body, bronze mounted (IBBM). • Choice of gravity operated, lever and weight operated, or lever and spring operated valves. [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Swing; Check
- Valve Size: 14.00 to 36.00
from FLSmidth
General. The DA Feeder introduces material into the conveying system at highest volumetric efficiency when material flow into the feeder is controlled to permit free venting. The feeder may be used under a head of material when appropriate aeration is provided to create a path for relief of the... [See More]
- Primary Material: Cast Iron
- Media: Powder Solids
- Valve Type: Rotor Airlock Valve
- Valve Size: 3.00 to 5.00
from Prince Manufacturing Corp.
STANDARD FEATURES. Hydraulically balanced, hard chrome plated spool. Handle can be installed in “up ” or “down ” position. Detent release pressure adjustable from 1000 to 2000 PSI. For use with system flows up to 25 GPM. Relief valve adjustable up to 2750 PSI. Tandem center... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Directional; Spool; Relief
- Valve Size: 0.50 to 0.75
from G.I.E. Inc.
FEATURES1. Face to Face dimensions as per as perANSI B16.10150# Narrow / EN558-2 Series 20.2. Suitable for mounting onANSI B16.5 150# flanges3. Testing as perAPI 598 / EN12266-14. Stem connection and integrated actuator mountingflange as perISO5211.5. Spring loaded stem seal.6. Elastomeric backing... [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Butterfly; Shut Off
- Valve Size: 2.00
from Mueller Steam Specialty
Designed for liquids and gases where flow reversal can cause surge and water hammer. Elastomer seats provide bubble-tight shutoff. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Air; Breathable; Compressed Air; Chemical (optional feature)
- Valve Type: Wafer; Check
- Valve Size: 2.00 to 54.00
from BI-TORQ® Valve Automation
Manual Wafer and Lug Butterfly Valve. Features. Wafer or lug style cast iron butterfly valves. 2-8": with lever, 10" & 12" with gear opeator. Standard stainless steel disc and stem. Standard 10-position locking handle. Cast iron gears available. ISO direct mount for easy retrofit automation. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Air; Compressed Air
- Valve Type: Butterfly
- Valve Size: 2.00 to 8.00
from Watts
Series 1000DCV Detector Check Valves are used in fire protection applications to detect leakage or unauthorized use of water in fire or automatic sprinkler systems. It consists of a cast iron body construction with choice of flanged or threaded connections. Series 1000DCV can be installed in... [See More]
- Primary Material: Cast Iron
- Valve Size: 1.50 to 2.00
- Valve Type: Check
from Flomatic Valves
357 - Cast iron body and strainer. Threaded female connection. Hinged leather seat. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Primary Material: Cast Iron
- Valve Size: 1.25 to 8.00
- Valve Type: Foot Valve; Check
- Maximum Pressure: 20.00
from Crane Fluid Systems
Features & Benefits. Check valves permit flow in one direction only and close automatically if flow reverses. Entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Swing; Check
from Honeywell International, Inc.
2 WAY BALL VALVE TYPE. 4 INCH NOMINAL SIZE. ANSI 125 APPLICABLE STANDARD. AIR CONDITIONING SYSTEMS, HEATING, VENTILATING APPLICATION. -22 TO 250 DEG F TEMPERATURE RATING. ASTM A395 CAST IRON BODY MATERIAL. 4 INCH FLANGED X 4 INCH FLANGED END CONNECTION. 11 INCH END TO END DISTANCE. 316 STAINLESS... [See More]
- Primary Material: Cast Iron
- Valve Size: 4.00
- Valve Type: Control Valve
- Media Temperature: -22 to 250
from Spirax-Sarco
The KY31 and KY33 incorporate a pressure balancing bellows, which enables the valve to operate against higher differential pressures. [See More]
- Primary Material: Cast Iron
- Media: Steam
- Valve Type: Control Valve
- Valve Size: 0.50 to 2.00
from Radwell International
BUTTERFLY VALVE, 3 INCH, BI-DIRECTIONAL, LUG BODY, LEVER OPERATOR, CAST IRON BODY, ALUMINUM/BRONZE DISC, EPDM LINER. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Aluminum; Cast Iron
- Valve Type: Butterfly
from Red Valve Company, Inc.
Red Valve's Flexgate valve is designed with a cast iron body or fabricated steel body, stainless steel gate, and two heavy-duty elastomer cartridge slurry seats. The port is formed by two heavy duty cartridge elastomer slurry seat halves. The cartridge slurry seats are available in various... [See More]
- Primary Material: Cast Iron; Stainless Steel (optional feature); Steel (optional feature)
- Media: Water; Ground Water; Wastewater; Slurries
- Valve Type: Gate
- Valve Size: 3.00 to 72.00
from Victaulic Co. of America
6 INCH NOMINAL SIZE. 6 NOMINAL SIZE - DECIMAL. 6 NOMINAL SIZE - FRACTIONAL. AWWA APPLICABLE STANDARD. THROTTLING APPLICATION. SHUT-OFF SEAL INCLUSIONS/FEATURES. ALKYD ENAMEL COATED CAST IRON BODY MATERIAL. 175 PSI PRESSURE RATING. 6 INCH GROOVED X 6 INCH GROOVED END CONNECTION. 10.5 INCH END TO END... [See More]
- Primary Material: Cast Iron
- Maximum Pressure: 175.00
- Valve Type: Plug
- Actuation: Manual
from Xiamen Landee Industries Co., Ltd.
Cast Iron Gate Valves with International Standards, Made of Cast Iron. Model Number: LD 001C-GT01. Key Specifications/Special Features: Sizes: 2 to 12 inches/DN50 to 300. Pressure: PN10 to PN16. Design dtandard: DIN 3352. Working temperatures: 80 to 100 °C. Materials: WCB, LCB, CF8, CF8M, CF3,... [See More]
- Primary Material: Cast Iron
- Media: Water; Gas; Oil
- Valve Type: Gate
- Valve Size: 2.00 to 12.00
from KSB AG
Design. Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU or Nitrile K). With lever, manual gearbox or pneumatic actuator. Full-lug type body (T4),. suitable for downstream dismantling and dead-end service. Valve disc made of stainless steel 1.4308. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Butterfly
- Valve Size: 0.79 to 23.62
from Mueller Company
bull; Meets or exceeds all applicable requirements of ANSI/AWWA C508 Standard. • Flanged end dimensions and drilling comply with ANSI B16.1, class 125. • Iron body, bronze mounted (IBBM). • Choice of gravity operated, lever and weight operated, or lever and spring operated valves. [See More]
- Primary Material: Brass / Bronze; Cast Iron
- Media: Water; Potable Water
- Valve Type: Swing; Check
- Valve Size: 2.00 to 12.00
from FLSmidth
General. When installed in a pressure conveying system, the use of (optional) Lantern Rings and (standard) Air Purge is recommended when fine powdery material is being conveyed to prevent contamination of packing and bearing. The air purge should be set 2 to 4 PSIG (.14 to .28 Kg/cm2) above... [See More]
- Primary Material: Cast Iron
- Media: Powder Solids
- Valve Type: Rotor Airlock Valve
- Media Temperature: 150
from Prince Manufacturing Corp.
STANDARD FEATURES. Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard Chrome Plated Spools. No face seals on spools. Adjustable cartridge relief. Power beyond available. 4 Position Float Spool for loader boom. 4 Position Regen Spool for loader... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Directional; Spool; Relief
- Maximum Pressure: 3000.00
from Mueller Steam Specialty
Designed for installation in pump discharge piping where it performs triple duty. It acts as a spring loaded silent check valve, a shutoff valve, and a balancing valve. Used in conjunction with the Mueller Steam Specialty suction diffuser, it constitutes a compact and effective complete pump... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water
- Valve Type: Balancing; Ball Check; Check; Shut Off
- Valve Size: 2.00 to 14.00
from BI-TORQ® Valve Automation
The SERIES 10 knife gate is a uni-directional wafer valve designed for industrial service applications. The design of the valve allows for a tight shutoff in services with solids in suspension. Industries served include: Pulp and Paper. Chemical Plants. Food and Beverage. Mining. Wastewater... [See More]
- Primary Material: Cast Iron; Stainless Steel (optional feature)
- Media: Wastewater; Chemical
- Valve Type: Gate
- Valve Size: 2.00 to 48.00
from Watts
Watts Drainage BV-200 cast iron backwater valve with gasketed cover, bronze seat and flapper, and no hub connections [See More]
- Primary Material: Cast Iron
- Media: Water
from Flomatic Valves
63 - Cast iron body with epoxy coating. Features threaded female connection. NITRILE (Buna-N) seal, high strength non-metallic or unleaded bronze or ductile iron poppet, stainless steel spring. Heavy-duty polyethylene strainer. For reference use only. Please check Flomatic's website for the latest... [See More]
- Primary Material: Cast Iron
- Valve Size: 2.00 to 6.00
- Valve Type: Foot Valve; Check; Poppet
- Maximum Pressure: 250.00
from Crane Fluid Systems
Features & Benefits. The F493 is a swing check valve with a Bronze trim. Manufactured to BS 5153:1974 [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Swing; Check
from Honeywell International, Inc.
2-WAY BALL VALVE TYPE. 6 INCH NOMINAL SIZE. ANSI CLASS IV, UL, CUL APPLICABLE STANDARD. HEATING, VENTILATING AND AIR CONDITIONING SYSTEM APPLICATION. NEMA 3R ENCLOSURE. -22 TO 250 DEG F TEMPERATURE RATING. ASTM A395 CAST IRON BODY MATERIAL. 240 PSI AT 250 DEG F PRESSURE RATING. 11 INCH FLANGED X 11... [See More]
- Primary Material: Cast Iron
- Valve Size: 6.00
- Valve Type: Control Valve
- Maximum Pressure: 240.00
from Spirax-Sarco
The KY31 and KY33 incorporate a pressure balancing bellows, which enables the valve to operate against higher differential pressures. [See More]
- Primary Material: Cast Iron
- Media: Steam
- Valve Type: Control Valve
- Valve Size: 1.25 to 2.00
from Radwell International
BUTTERFLY VALVE, 2-1/2 INCH, M SERIES, LUG BODY, LEVER HANDLE, CAST IRON, DISC MATERIAL ALLUMINUM/BRONZE, LINER MATERIAL EPDM. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron
- Valve Type: Butterfly
from Red Valve Company, Inc.
Megaflex Series 75 Manual Pinch Valves are ideal for reliable operation, long life, and low maintenance. The valves are constructed with a fabricated steel body, and double acting ACME threaded pinch mechanism which closes the sleeve on centerline. Red Valve Megaflex Series 75 Manual Pinch Valves... [See More]
- Primary Material: Cast Iron; Steel; Rubber; Sleeve Options: Gum Rubber, EPDM, Neoprene, Hypalon, Buna-N, Viton
- Media: Water; Ground Water; Wastewater; Powder Solids; Slurries
- Valve Type: Pinch
- Valve Size: 30.00 to 96.00
from Xiamen Landee Industries Co., Ltd.
Cast Iron Valves, Meeting Global Quality Standards. Model Number: LD 012-CI. Key Specifications/Special Features: Types: gate, globe, check, ball, butterfly, plug, foot, angle, air, Y-strainer... Manufacturing standards: API, ANSI, BS, DIN, JIS, MSS SP. Size range: from 1/2 inch to 64 inch (DN15mm -... [See More]
- Primary Material: Cast Iron
- Media: Air
- Valve Type: Ball Check; Foot Valve; Angle; Ball; Butterfly; Check; Gate; Globe; Plug
- Valve Size: 0.50 to 64.00
from KSB AG
Design. Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU or Nitrile K). With electric actuator. Semi-lug type body (T2), suitable for downstream dismantling and dead-end service. Valve disc made of stainless steel 1.4308. Connections to EN possible. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Butterfly
- Valve Size: 0.79 to 15.75
from Mueller Company
bull; Meets or exceeds all applicable requirements of ANSI/AWWA C508 Standard. • Flanged end dimensions and drilling comply with ANSI B16.1, class 125. • Iron body, bronze mounted (IBBM). • Choice of gravity operated, lever and weight operated, or lever and spring operated valves. [See More]
- Primary Material: Brass / Bronze; Cast Iron
- Media: Water; Potable Water
- Valve Type: Swing; Check
- Valve Size: 2.00 to 12.00
from Prince Manufacturing Corp.
STANDARD FEATURES. Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard Chrome Plated Spools. No face seals on spools. Adjustable cartridge relief. Power beyond available. 4 Position Series Float Spool for loader boom. 4 Position Regen Spool for... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Directional; Spool; Relief
- Maximum Pressure: 3000.00
from Mueller Steam Specialty
These soft-seated butterfly valves are designed for a variety of general applications in the control of water, steam, air, oil, and gases. They are equally effective for on-off, throttling, isolation, and dead end requirements. They are especially well suited for higher velocity service and vacuum... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater; Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Air; Breathable; Compressed Air; Chemical (optional feature)
- Valve Type: Butterfly
- Valve Size: 2.00 to 12.00
from Watts
Series F127SS Process Steam Pressure Regulators are used in commercial, industrial, and institutional applications to regulate steam pressure in main line and large capacity process services. They feature a cast iron body with flanged inlet and outlet connections, single seat, and diaphragm. Series... [See More]
- Primary Material: Cast Iron
- Valve Size: 3.00 to 4.00
- Media: Water; Steam
from Flomatic Valves
OUTSIDE SCREW & YOKE - Cast iron resilient wedge gate valves which meet AWWA C509 standard with bronze stem and are UL/FM listed, class 125. Tapped & plugged. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Primary Material: Cast Iron
- Valve Size: 2.50 to 10.00
- Valve Type: Gate
- Maximum Pressure: 175.00
from Crane Fluid Systems
Features & Benefits. Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Gate
from Honeywell International, Inc.
3 WAY BALL VALVE TYPE. 4 INCH NOMINAL SIZE. ANSI 125 APPLICABLE STANDARD. AIR CONDITIONING SYSTEMS, HEATING, VENTILATING APPLICATION. -22 TO 250 DEG F TEMPERATURE RATING. ASTM A395 CAST IRON BODY MATERIAL. 4 INCH FLANGED X 4 INCH FLANGED X 4 INCH FLANGED END CONNECTION. 11 7/8 INCH END TO END... [See More]
- Primary Material: Cast Iron
- Valve Size: 4.00
- Valve Type: Control Valve
- Media Temperature: -22 to 250
from Spirax-Sarco
The KY31 and KY33 incorporate a pressure balancing bellows, which enables the valve to operate against higher differential pressures. [See More]
- Primary Material: Cast Iron
- Media: Steam
- Valve Type: Control Valve
- Maximum Pressure: 100.08 to 130.53
from Radwell International
BUTTERFLY VALVE, 2 WAY, 4INCH, 24V, 175PSI, NC, CAST IRON BODY, NON SPRING RETURN ACTUATOR. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron
- Valve Type: Butterfly
from Red Valve Company, Inc.
The Series 75B manually operated Pinch Valve is a reliable, maintenance-free, cost effective valve designed for tough slurries and abrasive and corrosive chemical applications below ground. This pinch valve was designed specifically for underground service. It is sealed with an epoxy coating and... [See More]
- Primary Material: Cast Iron; Rubber; Sleeve Options: Gum Rubber, EPDM, Neoprene, Hypalon, Buna-N, Viton
- Media: Water; Ground Water; Wastewater; Powder Solids; Slurries
- Valve Type: Pinch
- Valve Size: 6.00 to 14.00
from Xiamen Landee Industries Co., Ltd.
Key Specifications/Special Features: Working pressure: PN10; PN16. Body materials: cast iron, ductile iron, aluminum bronze, stainless steel and carbon steel. Applicable temperature: from -40 to +230 degrees C. Size range: from 2 to 40 inches diameter (DN25 to DN1000mm). Face to face according to... [See More]
- Primary Material: Aluminum; Brass / Bronze; Cast Iron; Ductile Iron; Stainless Steel; Steel; Carbon Steel
- Media: Water; Hot Water; Cold Water ; Potable Water; Salt Water; Wastewater; Gas; Gasoline / Diesel Fuel; LP Gas; Natural Gas; Sour Gas
- Valve Type: Swing; Check
- Valve Size: 2.00 to 40.00
from KSB AG
Design. Control valve based on standard type series BOA-C, BOA-CS, BOA-C EKB, BOA-Control IMS, single-piece pressure-retaining body with soft seat. Leakage rate selectable from 0.05% to drop-tight at KVS valuesbetween 6.3 and 700 m3/h and closing pressures up to 16 bar. With intelligent... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water
- Valve Type: Control Valve
- Valve Size: 0.59 to 7.87
from Mueller Company
bull; Meets or exceeds all applicable requirements of ANSI/AWWA C508 Standard. • Flanged end dimensions and drilling comply with ANSI B16.1, class 125. • Iron body, bronze mounted (IBBM). • Choice of gravity operated, lever and weight operated, or lever and spring operated valves. [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Swing; Check
- Valve Size: 2.00 to 12.00
from Prince Manufacturing Corp.
STANDARD FEATURES. Economical monoblock construction of high tensile strength gray cast iron. Load check on each spool. Hard Chrome Plated Spools. No face seals on spools. Adjustable cartridge relief. Power beyond available. 4 Position Float Spool for loader boom. 4 Position Regen Spool for loader... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Directional; Spool; Relief
- Maximum Pressure: 3000.00
from Mueller Steam Specialty
Can be used in a variety of applications including: chilled and hot water systems, refrigeration, plumbing, air conditioning, gas and liquid applications, water filtration, oxygen systems, boiler feed lines, and centrifugal pump and compressor systems. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Refrigeration, Plumbing; Air; Breathable; Compressed Air; Chemical (optional feature)
- Valve Type: Ball Check; Check; Pivot Valves
- Valve Size: 2.00 to 36.00
from Watts
Series ACVW-125 Cast Iron Silent Check Valves are designed to prevent water hammer effect. The conical spring design allows the closure disc to travel more distance than other valves of this style, allowing a greater flow coefficient (Cv). Series ACVW-125 can be installed in either the horizontal or... [See More]
- Primary Material: Cast Iron
- Valve Size: 2.00 to 10.00
- Valve Type: Check
from Flomatic Valves
402BT/402BTR/402ST/402STR - Epoxy coated ductile iron silent check globe style, body design for use with class 150 flanges. Unleaded bronze metal to metal seating 2" - 12" sizes. Stainless Steel trim and resilient seat standard on 16", 20", 24" sizes (STR Models). Available on other sizes optional,... [See More]
- Primary Material: Cast Iron; Ductile Iron
- Valve Size: 2.00 to 24.00
- Valve Type: Check
- Media Temperature: 200
from Crane Fluid Systems
Features & Benefits. Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Gate
from Honeywell International, Inc.
3 WAY BALL VALVE TYPE. 4 INCH NOMINAL SIZE. ANSI 125 APPLICABLE STANDARD. AIR CONDITIONING SYSTEMS, HEATING, VENTILATING APPLICATION. -22 TO 250 DEG F TEMPERATURE RATING. ASTM A395 CAST IRON BODY MATERIAL. 4 INCH FLANGED X 4 INCH FLANGED X 4 INCH FLANGED END CONNECTION. 11 7/8 INCH END TO END... [See More]
- Primary Material: Cast Iron
- Valve Size: 4.00
- Valve Type: Control Valve
- Media Temperature: -22 to 250
from Spirax-Sarco
The KY31 and KY33 incorporate a pressure balancing bellows, which enables the valve to operate against higher differential pressures. [See More]
- Primary Material: Cast Iron
- Media: Steam
- Valve Type: Control Valve
- Maximum Pressure: 100.08 to 130.53
from Radwell International
BUTTERFLY VALVE, 339 SERIES, RESILIENT, SEATED, SIZE 3 INCH ANSI 150# WAFER FLANGE, CLASS B, 165 PSI, VITON BACKED TEFLON SEAT, STAINLESS STEEL DISC, CAST IRON BODY, NO ACTUATOR / BARE STEM VALVE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron; Stainless Steel; Steel
- Valve Type: Butterfly
from Red Valve Company, Inc.
Introduced and patented by Red Valve, the air -actuated Type A Pinch Valve offers a unique, cost-effective solution to flow control problems. More Red Valve Type A Valves are in use than any other Pinch Valve throughout the world. The secret is in the rubber sleeve - the valve ’s only wetted... [See More]
- Primary Material: Aluminum; Cast Iron; Rubber; Sleeve Options: Gum Rubber, EPDM, Neoprene, Hypalon, Buna-N, Viton
- Media: Water; Ground Water; Wastewater; Powder Solids; Slurries
- Valve Type: Pinch
- Valve Size: 0.50 to 28.00
from Xiamen Landee Industries Co., Ltd.
Floating Ball Valve with Flanged with API 6D Manufacture Standard. Model Number: LD 004-BVF3. Key Specifications/Special Features: Working pressure: 150, 300, 600, 900Lb (PN10 to PN160). Size range: from 1/2 to 8-inch. Body materials: cast iron, ductile iron, aluminum bronze, stainless steel and... [See More]
- Primary Material: Aluminum; Brass / Bronze; Cast Iron; Ductile Iron; Stainless Steel; Steel
- Media: Water; Gas; Oil
- Valve Type: Ball
- Valve Size: 0.50 to 8.00
from KSB AG
Design. Diaphragm valve; shut-off and sealing to atmosphere by diaphragm; straight-way pattern, position indicator with integrated stem protection. DN 125 to 200 with threaded bush. All moving parts are separated from the fluid by the diaphragm; maintenance-free, PN10. Applications. In building... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Wastewater; Powder Solids; Chemical
- Valve Type: Diaphragm
- Valve Size: 0.59 to 7.87
from Mueller Company
bull; Meets or exceeds all applicable requirements of ANSI/AWWA C508 Standard. • Flanged end dimensions and drilling comply with ANSI B16.1, class 125. • Iron body, bronze mounted (IBBM). • Choice of gravity operated, lever and weight operated, or lever and spring operated valves. [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Swing; Check
- Valve Size: 2.00 to 12.00
from Prince Manufacturing Corp.
FUNCTION. The PRINCE valve is a pressure compensated adjustable flow control valve. By rotating the handle, the flow out the “CF ”, or controlled flow port, can be varied from approximately 0 to the maximum controlled flow shown in the chart below. Any remaining flow is bypassed to the... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Metering; Spool
- Valve Size: 0.38
from Mueller Steam Specialty
Can be used in a variety of applications including: chilled and hot water systems, refrigeration, plumbing, air conditioning, gas and liquid applications, water filtration, oxygen systems, boiler feed lines, and centrifugal pump and compressor systems. [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Refrigeration, Plumbing; Air; Breathable; Compressed Air; Chemical (optional feature)
- Valve Type: Ball Check; Check; Pivot Valves
- Valve Size: 2.00 to 24.00
from Watts
Series ICVF-125 Cast Iron Silent Check Valves are used in commercial and industrial HVAC applications to prevent water hammer and reverse fluid flow in water lines. Their conical spring design allows the closure disc to travel more distance than other valves of this style, allowing a greater flow... [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Check
- Valve Size: 2.00 to 6.00
from Flomatic Valves
402BTR2 - Epoxy coated cast iron silent check globe style, body design for use with class 250 flanges. Bronze resilient seating with stainless steel spring (2"-12"), NITRILE (Buna-N) seal, EPDM seat. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Primary Material: Cast Iron
- Valve Size: 2.50 to 12.00
- Valve Type: Check
- Maximum Pressure: 400.00
from Crane Fluid Systems
Features & Benefits. Offer the ultimate in dependable service wherever minimum pressure drop is important [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Gate
from Honeywell International, Inc.
2 WAY GLOBE VALVE TYPE. INCH NOMINAL SIZE. ANSI 125 APPLICABLE STANDARD. WATER, GLYCOL, STEAM, AIR CONDITIONING, HEATING, VENTILATION APPLICATION. 2.5 NOMINAL SIZE IN MM. 35 TO 130 DEG F TEMPERATURE RATING. ASTM A126 CLASS B CAST IRON BODY MATERIAL. ACTUATOR EXCLUSIONS. 2 1/2 INCH FLANGED X 2 1/2... [See More]
- Primary Material: Cast Iron
- Media Temperature: 35 to 130
- Valve Type: Control Valve
- Actuation: Electric
from Spirax-Sarco
The AE10S is a high capacity float type automatic air and gas vent for liquid systems and is readily maintainable. The body and cover are of cast iron and the valve and seat of stainless steel. [See More]
- Primary Material: Cast Iron
- Media: Air
- Valve Type: Float
- Valve Size: 0.75
from Radwell International
BUTTERFLY VALVE, ECLIPSE, 1.25 INCH NPT, REDUCED PORT, CAST IRON BODY, AUTOMATIC, 501232. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron
- Valve Type: Butterfly
from Red Valve Company, Inc.
Red Valve's Series DX Slurry Knife Gate Valve is recognized as the most durable and user friendly knife valve designed for difficult slurry applications. Each time the valve strokes, the Series DX Valve is designed to discharge a small amount of slurry out of the valve, which keeps the gate path and... [See More]
- Primary Material: Cast Iron; Steel (optional feature)
- Media: Water; Ground Water; Wastewater; Slurries
- Valve Type: Gate
- Valve Size: 3.00 to 42.00
from Xiamen Landee Industries Co., Ltd.
Swing Check Valve with Cast Iron, Ductile Iron, Aluminum Bronze, and Stainless Steel Materials. Model Number:LD 016-WCK4. Key Specifications/Special Features: Working pressure: PN10, PN16, 125LBS. Body materials: cast iron, ductile iron, aluminum bronze, stainless steel, and carbon steel. Applicable... [See More]
- Primary Material: Aluminum; Brass / Bronze; Cast Iron; Ductile Iron; Stainless Steel; Steel
- Media: Water; Hot Water; Cold Water ; Potable Water; Salt Water; Wastewater; Gas; Gasoline / Diesel Fuel; LP Gas; Natural Gas; Sour Gas
- Valve Type: Swing; Check
- Valve Size: 2.00 to 40.00
from KSB AG
Design. Flanged end bellows-type globe valve with shut-off or throttling valve plug, standard position indicator with colour coding for identification of valve design, replaceable valve plug; bellows protected when valve is in fully open position; seats made of wear and corrosion resistant Cr steel... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Steam
- Valve Type: Metal Seated; Bellows; Globe; Shut Off
- Valve Size: 0.59 to 13.78
from Mueller Company
bull; Catalog number –. A-2361-16 mechanical joint x flanged ends (with accessories unassembled). A-2361-19 mechanical joint x flanged ends (less accessories). • Sizes – 4", 6", 8", 10", 12". • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL... [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Gate
- Valve Size: 30.00 to 36.00
from Prince Manufacturing Corp.
FUNCTION. The PRINCE valve model RD-1000S is an internally piloted adjustable sequence valve. This valve will prevent the flow of oil from going to the sequence port until the pressure on the inlet port reaches the sequence pressure. The sequence pressure is adjustable within the range given in... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Spool
- Valve Size: 0.38 to 0.50
from Mueller Steam Specialty
These soft-seated butterfly valves are designed for a variety of general applications in the control of water, steam, air, oil, and gases. They are equally effective for on-off, throttling, isolation, and dead end requirements. They are especially well suited for higher velocity service and vacuum... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater; Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Air; Breathable; Compressed Air; Chemical (optional feature)
- Valve Type: Butterfly
- Valve Size: 2.00 to 12.00
from Watts
Series ICV-125-2-2-T Cast Iron Wafer Check Valves are used in commercial and industrial HVAC applications to prevent water hammer and reverse fluid flow in water lines. They feature a cast iron body with aluminum-bronze disc plates, EPDM seat, PTFE bearings, stainless steel hinge and stop pins,... [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Wafer; Check
- Valve Size: 2.00 to 12.00
from Flomatic Valves
90CS/92CS* - Epoxy coated cast iron body. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125, with stainless steel shaft. Metal to metal standard or NITRILE (Buna-N) seal (Please add “R ” to end of part number) Features external lever and weight. Sealed end cushion... [See More]
- Primary Material: Cast Iron
- Valve Size: 2.00 to 30.00
- Valve Type: Swing; Check
- Maximum Pressure: 200.00
from Crane Fluid Systems
Features & Benefits. Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Rising stem gives visual indication of valve open position [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Gate
from Honeywell International, Inc.
2 WAY GLOBE VALVE TYPE. INCH NOMINAL SIZE. ANSI 250 APPLICABLE STANDARD. WATER, GLYCOL, STEAM, AIR CONDITIONING, HEATING, VENTILATION APPLICATION. 2.5 NOMINAL SIZE IN MM. 35 TO 130 DEG F TEMPERATURE RATING. ASTM A126 CLASS B CAST IRON BODY MATERIAL. ACTUATOR EXCLUSIONS. 2 1/2 INCH FLANGED X 2 1/2... [See More]
- Primary Material: Cast Iron
- Media Temperature: 35 to 130
- Valve Type: Control Valve
- Actuation: Electric
from Spirax-Sarco
The LCV3, LCV4, LCV6 and LCV7 lift check valves are designed in accordance with EN 12516 and ASME B16.34 to prevent reverse flow in the installations. The design of these valves allows them to be easily serviced without removing the valve from the pipeline. [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Lift Check; Check
- Valve Size: 0.50 to 4.00
from Radwell International
DISCONTINUED BY MANUFACTURER, BUTTERFLY VALVE, RESILENT, SEATED, SIZE 3IN ANSI 150 WAFER FLANGE, CLASS B, 165 PSI, VITON BACKED TEFLON SEAT, STAINLESS STEEL DISC, CAST IRON BODY, ACTUATOR/ BARE STEM VALVE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron; Stainless Steel; Steel
- Valve Type: Butterfly
from Red Valve Company, Inc.
The Series 75 manually operated pinch valve is the number-one selling pinch valve in the world today. The Series 75 is a reliable, maintenance-free, cost-effective valve designed for tough slurries, abrasives, and corrosive-chemical applications. The Series 75 full port design eliminates any dead... [See More]
- Primary Material: Aluminum; Cast Iron; Rubber; Sleeve Options: Gum Rubber, EPDM, Neoprene, Hypalon, Buna-N, Viton
- Media: Water; Ground Water; Wastewater; Powder Solids; Slurries
- Valve Type: Pinch
- Valve Size: 0.50 to 48.00
from Xiamen Landee Industries Co., Ltd.
Butterfly Valve Made from Various Sturdy Materials. Model Number: LD 006-BT. Key Specifications/Special Features: Manufacturing standards: API, ANSI, BS, DIN, JIS. Sealing: metal-seated, resilience-seated. Size range: from 1-1/4 inch to 64 inch (DN32mm - DN1600mm). Pressure: from PN0.1MPa to... [See More]
- Primary Material: Aluminum; Brass / Bronze; Cast Iron; Ductile Iron; Stainless Steel; Steel; Carbon Steel
- Valve Size: 1.25 to 64.00
- Valve Type: Metal Seated; Butterfly
- Media Temperature: -40 to 797
from KSB AG
Design. Wafer-type globe valve in super compact DN face-to-face length, slanted seat, bonnetless, with flange alignment holes for centering, dead-end service and downstream dismantling, insulating cap with anti-condensation feature as standard, position indicator, soft main and back seat;... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water
- Valve Type: Wafer; Check; Globe; Shut Off
- Valve Size: 0.79 to 7.87
from Mueller Company
INLINE, ANGLE AND TOP ENTRY IRON YOKE CHECK VALVE. Angle dual check valve. Inlet: Lock nut. Outlet: MUELLER 110 ™. Conductive Compression. Connection for CTS O.D.* tubing. [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Double Check; Check
- Valve Size: 0.62 to 0.75
from Prince Manufacturing Corp.
FUNCTION. The PRINCE valve model RD-1400 is a double pilot-operated lock valve. This valve will lock a cylinder in place when a directional control valve is in the neutral position. In operation oil is directed to one of the valve ports and oil can free flow to the corresponding cylinder port. The... [See More]
- Primary Material: Cast Iron; Steel
- Valve Size: 0.50
- Media: Hydraulic
- Maximum Pressure: 3000.00
from Mueller Steam Specialty
These soft-seated butterfly valves are designed for a variety of general applications in the control of water, steam, air, oil, and gases. They are equally effective for on-off, throttling, isolation, and dead end requirements. They are especially well suited for higher velocity service and vacuum... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water; Wastewater; Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic (optional feature); Air; Breathable; Compressed Air; Chemical (optional feature)
- Valve Type: Butterfly
- Valve Size: 2.00 to 12.00
from Watts
Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. It incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. [See More]
- Primary Material: Cast Iron
- Valve Size: 3.00 to 10.00
- Valve Type: Double Check; Check
from Flomatic Valves
90LS/92LS* - Epoxy coated cast iron body. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125, with stainless steel shaft. Metal to metal standard or NITRILE (Buna-N) seal (Please add “R ” to end of part number) Features external lever and spring. For vertical... [See More]
- Primary Material: Cast Iron
- Valve Size: 2.00 to 30.00
- Valve Type: Swing; Check
- Maximum Pressure: 200.00
from Crane Fluid Systems
Features & Benefits. Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Gate
from Honeywell International, Inc.
3 WAY GLOBE VALVE TYPE. INCH NOMINAL SIZE. ANSI 125 APPLICABLE STANDARD. WATER, GLYCOL, STEAM, AIR CONDITIONING, HEATING, VENTILATION APPLICATION. 4 NOMINAL SIZE IN MM. 35 TO 130 DEG F TEMPERATURE RATING. ASTM A126 CLASS B CAST IRON BODY MATERIAL. ACTUATOR EXCLUSIONS. 4 INCH FLANGED X 4 INCH FLANGED... [See More]
- Primary Material: Cast Iron
- Media Temperature: 35 to 130
- Valve Type: Control Valve
- Actuation: Electric
from Spirax-Sarco
The LCV3, LCV4, LCV6 and LCV7 lift check valves are designed in accordance with EN 12516 and ASME B16.34 to prevent reverse flow in the installations. The design of these valves allows them to be easily serviced without removing the valve from the pipeline. [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Lift Check; Check
- Valve Size: 0.50 to 4.00
from Radwell International
CAST IRON BUTTERFLY VALVE, LUG PATTERN, EPDM LINER, 3" CI/AL, LUG BF W/LEVER. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Cast Iron
- Valve Type: Butterfly
from Xiamen Landee Industries Co., Ltd.
Wafer Type Butterfly Valve with cast iron Body. Model Number: LD-018-BT7. Key Specifications/Special Features: Manufacturing standards: API, ANSI, BS, DIN, JIS. Sealing: metal-seated, resilience-seated. Size range: from 1-1/2inch to 24 inch (DN40mm - DN600mm). Pressure: from PN0.6MPa to PN1.6MPa. [See More]
- Primary Material: Cast Iron
- Valve Size: 1.50 to 24.00
- Valve Type: Metal Seated; Butterfly
- Maximum Pressure: 87.02 to 232.06
from KSB AG
Design. Wafer-type knife gate valve made of grey cast iron, single or two-piece body, bi-directional, with gland packing, non-rising stem, corrosion protected by epoxy coating. Applications. In industrial plants, waste water and process engineering, food industry. For water, waste water and... [See More]
- Primary Material: Cast Iron
- Media: Water; Hot Water; Cold Water ; Wastewater; Solid-Laced Fluids
- Valve Type: Gate
- Valve Size: 1.97 to 47.24
from Mueller Company
MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800. Components in. contact with potable water will also comply with latest requirements of the Federal Safe Drinking Water Act. [See More]
- Primary Material: Cast Iron
- Media: Water; Potable Water
- Valve Type: Metering
- Valve Size: 0.62 to 1.00
from Prince Manufacturing Corp.
FUNCTION. The PRINCE valve model RD-1600 is a pilot operated check valve. This valve blocks oil from flowing from the cylinder port to the valve port until sufficient pressure is applied to the pilot port. Oil can free flow from the valve port to the cylinder port. The valve has a two stage poppet... [See More]
- Primary Material: Cast Iron; Steel
- Media: Hydraulic
- Valve Type: Lift Check; Check
- Valve Size: 0.25 to 0.38
from Watts
Series LF709 Lead Free* Double Check Valve Assemblies prevent the reverse flow of polluted water from entering into the potable water supply. It has a modular check design for easy maintenance and epoxy coated (FDA approved) cast iron body construction. Series LF709 is ideal at referenced... [See More]
- Primary Material: Cast Iron
- Valve Size: 2.50 to 10.00
- Valve Type: Double Check; Check
from Flomatic Valves
90LW/92LW* - Epoxy coated cast iron body. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125, with stainless steel shaft. Metal to metal standard or NITRILE (Buna-N) seal (Please add “R ” to end of part number) Features external lever and weight. For vertical... [See More]
- Primary Material: Cast Iron
- Valve Size: 2.00 to 30.00
- Valve Type: Swing; Check
- Maximum Pressure: 200.00
from Crane Fluid Systems
Features & Benefits. Aluminium Bronze disc. Stainless steel shaft. Trigger lever. Valves are suitable for use with flanges conforming to BS EN 1092-2 PN10 or PN16 and ANSI B16.1 Class 125. F621 is WRAS approved [See More]
- Primary Material: Cast Iron
- Media: Water
- Valve Type: Butterfly
from Honeywell International, Inc.
3 WAY GLOBE VALVE TYPE. INCH NOMINAL SIZE. ANSI 250 APPLICABLE STANDARD. WATER, GLYCOL, STEAM, AIR CONDITIONING, HEATING, VENTILATION APPLICATION. 4 NOMINAL SIZE IN MM. 35 TO 130 DEG F TEMPERATURE RATING. ASTM A126 CLASS B CAST IRON BODY MATERIAL. ACTUATOR EXCLUSIONS. 4 INCH FLANGED X 4 INCH FLANGED... [See More]
- Primary Material: Cast Iron
- Media Temperature: 35 to 130
- Valve Type: Control Valve
- Actuation: Electric
from Spirax-Sarco
The standard Type 58 temperature control is a three port mixing or diverting valve suitable for heating or cooling applications on water or oil systems. [See More]
- Primary Material: Cast Iron
- Media: Water; Oil
- Valve Type: Control Valve
- Maximum Pressure: 100.08
from Radwell International
DISCONTINUED BY MANUFACTURER, BUTTERFLY VALVE, LG SERIES, WAFER BODY TYPE, LEVER OPERATION, 200 PSI, BUNA-N, ALUMINUM BRONZE DISC, STAINLESS STEEL STEM, CAST IRON BODY. FREE 2 YEAR RADWELL WARRANTY [See More]
- Primary Material: Aluminum; Cast Iron; Stainless Steel; Steel
- Valve Type: Butterfly