Poppet Valves Industrial Valves
from Clippard
Electronic Solenoid Valve [See More]
- Valve Type: Control Valve; Directional; Poppet; Solenoid
- Media: Air; Compressed Air
- Primary Material: Aluminum
- Valve Size: 0.19
from Radwell International
BASIC LOGIC VALVE, SERIES 2L, FUNCTION: OR, PNEUMATIC SYMBOL: 0R01, LOGIC SYMBOL: 0R02, 4 MM TUBE, 29 - 116 PSI, AIR SIGNAL, POPPET DESIGN, 30-9100-5004. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
- Actuation: Pneumatic
- Media: Air
- Connection Description: Tube Fitting
from Ellsworth Adhesives
Fisnar VMP30H is a multipurpose dispensing valve is designed for smaller bead and shot sizes than the VP300 dispensing valve, although the cycle rate is the same at 300 cycles a minute. Suitable for mid-high viscosity liquids such as silicone, RTV, epoxy, adhesives, grease, and fluids containing... [See More]
- Valve Type: Poppet; Mini Poppet
from Plast-O-Matic Valves, Inc.
Series MFR Normally-closed, hand or foot operated valve for vacuum through 150 PSI. Offered in 1/2 ″ and 3/4 ″ pipe sizes, threaded ends, in Geon PVC. [See More]
- Valve Type: Poppet
- Media: Pure Liquids, Acids, Caustics; Chemical
- Primary Material: PVC
- Valve Size: 0.50 to 0.75
from Clippard
2-Way Air-Piloted Valve [See More]
- Valve Type: Control Valve; Directional; Poppet
- Media: Water; Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.19
from Radwell International
VALVE, POPPET, 3 PORTS, 2 POSITIONS, NORMALLY CLOSED FUNCTION, INLINE DIRECT PIPING, SHROUD/SIDE/BASE/PANEL MOUNT, PNEUMATIC, 0.30 CV FLOW CAPACITY, 18 NPSF, 30-125 PSI. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
- Number of Ports: 3
- Media: Air
- Actuation: Pneumatic
from Ellsworth Adhesives
Fisnar VMP30H-RK is a repair kit for use with the VMP30H mini poppet valve. [See More]
- Valve Type: Poppet; Mini Poppet
from Clippard
2-Way Valve, 1/8", Normally-Closed [See More]
- Valve Type: Directional; Poppet
- Media: Water; Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.12
from Radwell International
DISCONTINUED BY MANUFACTURER, POPPET CHECK VALVE, TEF O-RING, SC-11 CLEAN, STAINLESS STEEL. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Check; Poppet
- Primary Material: Stainless Steel; Steel
from Ellsworth Adhesives
Fisnar VP300-RK is a repair kit for use with the VP300 poppet valve. [See More]
- Valve Type: Poppet; Poppet
from Clippard
2-Way Toggle Valve, Normally-Closed, Momentary Open Toggle, 1/8" NPT Male Inlet [See More]
- Valve Type: Directional; Poppet; Toggle
- Media: Water; Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.12
from Radwell International
DISCONTINUED BY MANUFACTURER, POPPET VALVE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
from Clippard
2-Way Valve, #10-32 Ports, Normally-Closed [See More]
- Valve Type: Directional; Poppet
- Media: Water; Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.19
from Radwell International
DISCONTINUED BY MANUFACTURER, POPPET VALVE, G1/8, 4-10 BAR. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
from Clippard
Clippard is known as the pioneer of miniature pneumatic products. The MAV series poppet valves were introduced in 1958 and were known for their bubble tight design with large flow for their small #10-32 threaded ports. Clippard ’s GV series valves offer the same characteristics of its original... [See More]
- Valve Type: Cartridge; Poppet; Stem Valve
- Media: Water; Oil; Air
- Primary Material: Aluminum; Brass / Bronze
- Maximum Pressure: 150.00
from Radwell International
DISCONTINUED BY MANUFACTURER, PILOT INLINE POPPET VALVE, P06 SERIES, 1" NPTF. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Pilot; Poppet
from Clippard
2-Way Toggle Valve, #10-32 Ports [See More]
- Valve Type: Directional; Poppet; Toggle
- Media: Water; Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.19
from Radwell International
SOLENOID VALVE, 3 PORT, POPPET TYPE, 1/2IN NPTF PORTS, 110V AC 50/60HZ, EXTERNAL PILOT,. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Pilot; Poppet; Solenoid
- Number of Ports: 3
from Clippard
Electronic Solenoid Valve [See More]
- Valve Type: Control Valve; Directional; Poppet; Solenoid
- Media: Air; Compressed Air
- Primary Material: Aluminum
- Valve Size: 0.19
from Radwell International
POPPET VALVE, TWO WAY, LEVER, SPRING RETURN. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
from Clippard
Electronic Solenoid Valve [See More]
- Valve Type: Control Valve; Directional; Poppet; Solenoid
- Media: Air; Compressed Air
- Primary Material: Aluminum
- Valve Size: 0.19
from Radwell International
3 PORT POPPET TYPE VALVE. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
- Number of Ports: 3
from Clippard
3-Way Air-Piloted Valve [See More]
- Valve Type: Control Valve; Directional; Poppet
- Media: Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.19
from Radwell International
MICRO MECHANICAL VALVE, SERIES VM1000, NORMALLY CLOSED POPPET, 3 PORT, SIDE PORTED, 4.8MM TRAVEL, NYLON/POLYURETHANE TUBING, 4/2.5 MM DIAMETER, BASIC ACTUATOR. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
- Number of Ports: 3
from Clippard
3-Way Valve, 1/8", Normally-Closed [See More]
- Valve Type: Directional; Poppet
- Media: Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.12
from Radwell International
MICRO MECHANICAL VALVE, SERIES VM1000, NORMALLY CLOSED POPPET, 3 PORT, BOTTOM PORTED, 4.8 MM TRAVEL, NYLON/POLYURETHANE TUBING, 4/2.5 MM DIAMETER, EXTENDED PUSH BUTTON, BLACK PUSH BUTTON. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
- Number of Ports: 3
from Clippard
3-Way Toggle Valve, Normally-Closed, Momentary Open Toggle [See More]
- Valve Type: Directional; Poppet; Toggle
- Media: Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.19
from Radwell International
MICRO MECHANICAL VALVE, SERIES VM1000, NORMALLY CLOSED POPPET, 2 PORT, SIDE PORTED, 4.8 MM TRAVEL, NYLON/POLYURETHANE TUBING, 4/2.5 MM DIAMETER, ROLLER LEVER. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
- Number of Ports: 2
from Clippard
3-Way Valve, #10-32 Ports, Normally-Closed [See More]
- Valve Type: Directional; Poppet
- Media: Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.19
from Radwell International
CONTROL VALVE, PILOT/POPPET/SOLENOID VALVE, 3 PORT, 4.8 WATTS DC-2WATTS DC. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Control Valve; Pilot; Poppet; Solenoid
- Number of Ports: 3
from Clippard
2-Way Electronic Poppet Valve [See More]
- Valve Type: Control Valve; Directional; Cartridge; Poppet; Solenoid
- Media: Air; Compressed Air
- Primary Material: Zytel ST 801®
- Valve Size: 0.19
from Radwell International
CONTROL VALVE, POPPET, 3 WAY, 3 NC, 1/8 INCH NPT. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Control Valve; Poppet
from Clippard
Clippard Minimatic ® electronic valves are precision-built 2-way control valves, utilizing a unique, patented valving principle. The powerful DV- Series was designed as the next generation of the well-known and trusted original EV line of Clippard “Mouse ” valves. With a cycle life... [See More]
- Valve Type: Control Valve; Cartridge; Poppet; Solenoid
- Media: Gas; Air
- Primary Material: Stainless Steel
- Valve Size: 0.05
from Radwell International
MICRO LIMIT VALVE, POPPET TYPE, 2 POSITION, 3 WAY, NORMALLY CLOSED, 10-32 THREAD, OPERATING PRESSURE 30-150 PSI. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
- Connection Description: Threaded
from Clippard
Fill & Bleed Valve, Detented/Detented, Adj. Flow, #10-32 Port [See More]
- Valve Type: Directional; Poppet; Toggle
- Media: Air; Compressed Air
- Primary Material: Brass / Bronze
- Valve Size: 0.19
from Radwell International
VALVE, VG342 SERIES, POPPET TYPE, 3 PORT, EXTERNAL PILOT, 24 VDC RATED, DIN TERMINAL ELECTRICAL ENTRY, WITH LIGHT/SURGE SUPPRESSOR, 1 INCH PORT, G-TYPE THREAD, CE COMPLIANT. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Pilot; Poppet
- Connection Description: Threaded
- Number of Ports: 3
from Clippard
NIV series multi-channel gradient valves feature multiple 2-Way, Normally-Closed PTFE media isolation valves connected around a central body. This unique design provides significant reduction in internal volume with enhanced mixing capabilities. Each actuator operates independently, allowing for... [See More]
- Valve Type: Mixing; Diaphragm; Poppet; Solenoid; Gradient Valve
- Media: Water; Gas; Compatible Fluids; Air
- Primary Material: PTFE
- Maximum Pressure: 30.00
from Radwell International
INLINE POPPET VALVE, WEIGHT GAGE , 3 WAY. FREE 2 YEAR RADWELL WARRANTY [See More]
- Valve Type: Poppet
from ControlAir LLC
The Type 100 is a high precision, multi-stage pressure regulator. This pressure controller provides the highest level of regulation accuracy and repeatability available. The Type 100 is ideal for applications that call for the utmost in control and maximum stability under variable operating... [See More]
- Valve Type: Pilot; Poppet
- Media: Air; Compressed Air
- Primary Material: Diecast Zinc Alloy
- Valve Size: 0.12 to 0.38
from Hi-Tech Controls, Inc.
These valves have been designed to mount directly into the cylinder ports. The inner design of the blocking valves Series VBO and VBU allows a very high flow rate and reliable operation. [See More]
- Valve Type: Block Bleed; Poppet
- Valve Size: 0.12
- Media: Air; Compressed Air
- Maximum Pressure: 145.00
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
TESCOM ™ VA and VG Series are air operated valves offering normally open/normally closed capabilities, operating pressures of 6000, 10000 and 15000 PSIG [413, 690, 1034 bar], very high cycle life and optional integrated solenoid valve. Suitable for liquid and gas applications, the VA and VG... [See More]
- Valve Type: Poppet; Solenoid (optional feature)
- Media: Water; Gas
- Primary Material: Brass / Bronze; Stainless Steel (optional feature)
- Valve Size: 0.12 to 0.38
from Flomatic Valves
80DI - High strength epoxy coated ductile iron body, disc and follower with threaded female connections. Features a NITRILE (Buna-N) seal, stainless steel spring fasteners, and ductile iron poppet. 2 ½" and larger are recommended for vertical applications. See 80DIX or VFD design for... [See More]
- Valve Type: Check; Poppet
- Valve Size: 1.00 to 8.00
- Primary Material: Ductile Iron
- Maximum Pressure: 600.00
from OMEGA Engineering, Inc.
The OMEGA PRG700 Series regulators are designed for applications that require high flow capacity and accurate process control. A poppet valve balanced by a rolling diaphragm insures a constant output pressure even during wide supply pressure variations. Stability of regulated pressure is maintained... [See More]
- Valve Type: Poppet
- Maximum Pressure: 250.00
- Valve Size: 0.25 to 0.38
- Number of Ports: 2
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.12 to 0.25
- Primary Material: Brass / Bronze
- Maximum Pressure: 500.00
from ASCO
For compressed air and vacuum, the Numatics poppet valves are ideal for single acting cylinders, air bellows, and vacuum material handling. Features: Nylon shell & steel reinforced base plate. Die cast zinc alloy valve body. Spring return & detented models. Large opening for foot operation. [See More]
- Valve Type: Poppet
- Maximum Pressure: 24.00 to 145.00
- Media: Air; Compressed Air
- Number of Ports: 5
from HydraForce, Inc.
A solenoid-operated, 2-way, normally open, internally piloted, poppet-type, bi-directional blocking, screw-in hydraulic cartridge valve, designed for low leakage in load-holding applications. [See More]
- Valve Type: Lift Check; Cartridge; Check; Poppet; Solenoid
- Media: Hydraulic
- Primary Material: Steel
- Valve Size: 0.38
from Atos North America
ARE are poppet type, direct operated pressure relief valves, with threaded ports for in-line mounting. The flow is permitted when pressure force acting on the poppet overcomes the force of the spring. Regulation is operated by means of a screw or optionally by means of a handwheel acting on the... [See More]
- Valve Type: Poppet; Relief
- Valve Size: 0.25 to 0.50
- Media: Hydraulic
- Maximum Pressure: 7251.89
from Interface Devices, Inc.
IDI DO3 (CETOP 3, ISO 3) 4 way hydraulic directional valve, poppet style, solenoid actuated directional control valves handles flows up 3 GPM and pressures to 5000 psi. Ideally suited for use with IDI Air Driven Pumps (all models). Aircraft grade aluminum body is narrow and lightweight. Available... [See More]
- Valve Type: Cartridge; Poppet; Solenoid
- Maximum Pressure: 6000.00
- Primary Material: Aluminum
- Number of Ports: 4
from Check-All Valve Mfg. Co.
The Bushing Valve is a check valve with a standard bushing housing. The valve is adaptable to many types of service applications. It has very little restriction and produces a low pressure drop. It can be used quite effectively in systems where flow and pressure drop are critical by the use of a... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon; Bushing Valve
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Alloy 20, Alloy C-276, Titanium
- Valve Size: 0.50
from Clark Solutions
The 1/4" to 3/4" relief valves are suitable for pressure settings up to 100 PSI. Higher pressure settings are possible by changing the spring. The 1" relief valve is suitable for pressure settings up to 200 PSI. [See More]
- Valve Type: Ball; Poppet; Relief
- Valve Size: 0.25
- Media: Air; Compressed Air
- Number of Ports: 2
from Valcor Engineering Corporation
Description. The SV61 & SV62 series are direct acting, 2-way normally closed general-purpose solenoid valves. The spring loaded poppet provides positive shifting and bubble tight shut-off when de-energized. Minimal moving parts make these valves dependable and suitable for long life service. [See More]
- Valve Type: Control Valve; Poppet; Solenoid
- Media: Water (optional feature); Gas (optional feature)
- Primary Material: Brass / Bronze (optional feature); PP
- Valve Size: 0.06 to 0.25
from Zurn Industries LLC
The Zurn metering cartridge assembly has easily adjustable cycle times to reduce water consumption and provide superior performance. Features And Benefits. Adjustable lower cycle time. Low-lead compliant. Crosses to T &S 238A [See More]
- Valve Type: Metering; Poppet
- Media: Water
from Pneumadyne, Inc.
Cost effective, space saving solution for the use of single or multiple valves. A wide variety of connector, electrical and mounting options are available to accommodate numerous applications. Convenient Line & 90 ° Connectors (both with LED) provide quick electrical connection when used in... [See More]
- Valve Type: Control Valve; Directional; Poppet
- Media: Water; Air; Compressed Air
- Primary Material: Aluminum; Brass / Bronze; Stainless Steel; Exotic Metal (optional feature)
- Valve Size: 0.12 to 0.19
from Eaton Hydraulics Group
Solenoid Valves. For systems deployed in harsh environments, count on industry-leading Eaton solenoid-actuated Screw-in Cartridge Valves (SiCV) to support nearly every flow, pressure and directional control requirement thrown at them. With superior ingress protection and unsurpassed performance,... [See More]
- Valve Type: Cartridge; Poppet; Solenoid; Spool
- Maximum Pressure: 3000.00 to 5000.00
- Media: Hydraulic
from Doering Company
4-way, 3-way as well as 2-way poppet valves that have normally open and normally closed options. There are air pilot and hydraulic and gas pilot options with classic manual-operated versions. [See More]
- Valve Type: Poppet
from Continental Hydraulics
VER03M. PROPORTIONAL PRESSURE RELIEF VALVES. Mounting Surface NFPA R03 (D03) (ISO 6264-03-04-*-97). Max Pressure 5000 PSI (350 bar). Max Flow Rate 1.32 gpm (5 l/min). Description. VER03M is a direct operated proportional relief valve, with mounting in compliance with NFPA/T3.5.1 R2-2002 and ISO... [See More]
- Valve Type: Poppet; Solenoid; Relief
- Maximum Pressure: 1015.26 to 5076.32
- Media: Hydraulic
from DME Company
These precision-engineered valves are designed to remedy the vacuum problem often encountered during the molding of deep-draw or thin-walled parts. [See More]
- Valve Type: Poppet
- Media: Air; Compressed Air
- Primary Material: Stainless Steel
- Valve Size: 0.31 to 0.71
from Strataflo Products, Inc.
The No. 200 contains a silicone treated Buna-S rubber poppet, designed to open easily. and be more durable than O-rings. Being flexible, they cannot leak. They are manufactured. from a one piece cast brass body. The unique strainer consists of a helically wound stainless. steel spring wire which is... [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 0.75
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Watts
Series LF4L is used to protect against excessive pressure in tankless water heaters. Similar in construction to Watts Model LF3L, the LF4L has no temperature relieving element. Series LF4L is available in 150 psi (10.3 bar) standard setting. The LF4L features Lead Free* construction to comply with... [See More]
- Valve Type: Poppet; Relief
- Valve Size: 0.75
- Media: Water
from Almo Manifold & Tool Co.
- Standard ISO 7368 and DIN 24342 cavity and porting. - Control Areas provide fast response time. - Can close poppet under high load pressure. [See More]
- Valve Type: Pilot; Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Stainless Steel; Steel
- Valve Size: 0.98
from XOMOX (A Crane Co. Company)
Lined valves and accessories use fluorocarbons such as PFA, PVDF, PTFE, PFA-AS (antistatic), and UHMWPE upon customer request. The melt process allows the liner to be locked into dovetails, locking grooves, and locking holes in the casting. Consequently, the potential for liner collapse and blow out... [See More]
- Valve Type: Lift Check; Check; Poppet
- Media: Air; Chemical
- Primary Material: Ductile Iron; Steel
- Valve Size: 6.00
from Hi-Tech Controls, Inc.
The pneumatically operated amplifier valve is a 3-way/2-position normally closed valve, changing low pressure signals into 2 - 8 bar pressure signals. The valve construction allows permanent reduced air consumption at rest. Pilot pressure applied at Port 12 actuates valve and allows pressure (2 - 8... [See More]
- Valve Type: Poppet
- Valve Size: 0.12
- Media: Air; Compressed Air
- Maximum Pressure: 116.00
from Flomatic Valves
80DI-VFD - High strength epoxy coated ductile iron patented body, poppet and guide with threaded female NPT connections. Features a NITRILE (Buna-N) seal. Designed for vertical or horizontal applications. NSF/ANSI 61 and 372 approved. For reference use only. Please check Flomatic's website for the... [See More]
- Valve Type: Check; Poppet
- Valve Size: 1.00 to 10.00
- Primary Material: Ductile Iron
- Maximum Pressure: 600.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. manufactures a diverse line of check valves made of brass, electroless nickel plated brass & stainless steel. Designs promote multiple configuration, sizes & materials. Options & application include, but are not limited to the following: Pipe Thread (NPT), Hose... [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.75
- Primary Material: Brass / Bronze
- Maximum Pressure: 1200.00
from ASCO
Regulations that restrict lead content in devices used for potable water are becoming more common, presenting new design issues for OEMs. That's why ASCO gives OEMs the choice of using lead-free brass, composite, or stainless steel constructions. Lead-Free brass valves comply with Federal Safe... [See More]
- Valve Type: Poppet
- Media: Water; Gas; Air
- Primary Material: Brass / Bronze
- Valve Size: 0.12 to 1.00
from HydraForce, Inc.
A solenoid-operated, two-way, pilot-operated, poppet-type, normally closed, screw-in hydraulic cartridge valve with outlet fl ow check, designed for low leakage in load holding applications. [See More]
- Valve Type: Cartridge; Poppet; Solenoid
- Media: Hydraulic
- Primary Material: Steel
- Valve Size: 0.38
from Atos North America
DLOH and DLOK are poppet type, two or three way, two position direct operated solenoid valves, designed to operate in oil hydraulic systems when leak fee is required. They are operated by wet type solenoids type OLU and OLK with coil certified according to the North American standard cURus. The DLOH... [See More]
- Valve Type: Poppet; Solenoid
- Valve Size: 0.24
- Media: Hydraulic
- Maximum Pressure: 5076.32
from Check-All Valve Mfg. Co.
The Connector Valve is a check valve with a hex nipple or connector housing. It is designed to be used in installations where check valves with male pipe threads are required. The Connector Valve is adaptable for use as a check valve, vacuum breaker, or low pressure relief valve. Two valves used in... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Steam; Liquids; Air; Chemical
- Primary Material: Aluminum (optional feature); Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Alloy 20, Alloy C-276, Titanium
- Valve Size: 0.50
from Valcor Engineering Corporation
Description. The SV84 series is a 2-way, balanced poppet solenoid valve that is capable of handling up to 625 PSI of pressure. This unique design opens and closes independent of pressure. The poppet and seal assembly is spring loaded and shifted by a high force solenoid. This direct acting series... [See More]
- Valve Type: Control Valve; Poppet; Solenoid
- Media: Water (optional feature); Gas (optional feature)
- Primary Material: Brass / Bronze
- Valve Size: 1.00
from Pneumadyne, Inc.
Cost effective, space saving solution for the use of single or multiple valves. A wide variety of connector, electrical and mounting options are available to accommodate numerous applications. Convenient Line & 90 ° Connectors (both with LED) provide quick electrical connection when used in... [See More]
- Valve Type: Control Valve; Directional; Poppet
- Media: Water; Air; Compressed Air
- Primary Material: Aluminum; Brass / Bronze; Stainless Steel; Exotic Metal (optional feature)
- Valve Size: 0.12 to 0.19
from Continental Hydraulics
F0*MSV-BV. NORMALLY CLOSED BLOCKING VALVE. Mounting Surface NFPA D03 (ISO 4401-03-02-0-05) & NFPA D05 (ISO 4401-05-04-0-05). Max Pressure 5000 PSI (350 bar). Max Flow Rate 30 gpm (114 l/min). Description. This modular stack valve is designed to help block oil movement both from the control valve... [See More]
- Valve Type: Control Valve; Cartridge; Check; Poppet; Solenoid
- Maximum Pressure: 5000.00
- Media: Hydraulic
- Number of Ports: 2
from Strataflo Products, Inc.
The No. 201 is equipped with a stainless steel poppet, ruggedly constructed and suitable for. a wide variety of applications. They are manufactured from a one piece cast brass body. The. unique strainer consists of a helically wound stainless steel spring wire which is durable and. cannot corrode. [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 0.75
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Watts
Series LF3L and LF53L are used for protection against excessive pressure on domestic storage tanks or tankless water heaters. Similar in construction to Watts Model LF10L, the Model LF3L has no temperature relieving element. Model LF53L has the same basic design as Model LF3L except it is furnished... [See More]
- Valve Type: Poppet; Relief
- Valve Size: 0.50
- Media: Water
from Flomatic Valves
80DI8R-VFD 8 Round Line Pipe Threads. High strength epoxy coated ductile iron patented body, poppet and guide with 8 round connection. Features a NITRILE (Buna-N) seal, with stainless steel shaft and a ductile iron poppet. Designed for vertical or horizontal applications. Contact factory for thread... [See More]
- Valve Type: Check; Poppet
- Valve Size: 3.00 to 8.00
- Primary Material: Ductile Iron
- Maximum Pressure: 600.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. manufactures a diverse line of check valves made of brass, electroless nickel plated brass & stainless steel. Designs promote multiple configuration, sizes & materials. Options & application include, but are not limited to the following: Pipe Thread (NPT), Hose... [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.25 to 0.38
- Primary Material: Brass / Bronze
- Maximum Pressure: 1200.00
from ASCO
For compressed air and vacuum, the Numatics poppet valves are ideal for single acting cylinders, air bellows, and vacuum material handling. Features: Air pilot actuated. 3-way & 2-way design. Use with air or neutral gas. For lubricated or non-lubricated service. Cad drawings available. High... [See More]
- Valve Type: Poppet
- Maximum Pressure: 24.00 to 145.00
- Media: Air; Compressed Air
- Number of Ports: 3
from HydraForce, Inc.
A proportional solenoid-operated, 2-way, poppet-type, normally open, screw-in hydraulic cartridge valve for low-leakage load-holding applications and for starting or stopping a load or a pump system. [See More]
- Valve Type: Directional; Cartridge; Poppet; Solenoid
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.38
from Atos North America
LIQV and LIDD are flow control valves composed by a 2 way cartridge housed in a standard recess and by a functional "cover". The cartridge is composed by a spool (for LIQV) or poppet (for LIDD) sliding into a drilled sleeve; the position of the spool or poppet, corresponding to the regulation of the... [See More]
- Valve Type: Control Valve; Cartridge; Poppet; Spool
- Valve Size: 0.63 to 2.48
- Media: Hydraulic
- Maximum Pressure: 5076.32
from Check-All Valve Mfg. Co.
The CAV series of valves are not catalog items but rather are custom designed and tailored to meet customer specific connections or valve configurations. If you have a check valve application where our standard catalog items do not quite match what you are looking for, contact our sales department... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Cartridge (optional feature); Check; Poppet; Relief (optional feature); Anti-Siphon (optional feature)
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Aluminum; Brass / Bronze; Stainless Steel (optional feature); Steel (optional feature); Exotic Metal; Titanium, Monel
- Actuation: Pressure
from Valcor Engineering Corporation
Description. The SV85 series is a 3-way, balanced poppet solenoid valve that is capable of handling up to 625 PSI of pressure in the diverting mode of flow. The normally open and normally closed versions handle 250 PSI of pressure. The poppet and seal assembly is spring loaded and shifted by a high... [See More]
- Valve Type: Control Valve; Diverter (optional feature); Poppet; Solenoid
- Media: Water; Steam (optional feature)
- Primary Material: Brass / Bronze
- Valve Size: 1.00
from Pneumadyne, Inc.
Flow controls and Needle valves are used to reduce the rate of flow in a leg of a system, consequently the restriction slows cylinder speed. Finely threaded stems allow gradual adjustment of controlled flow to match system requirements. Although the basic function is flow restriction, the... [See More]
- Valve Type: Control Valve; Directional; Lift Check; Check; Poppet
- Media: Water; Air; Compressed Air
- Primary Material: Brass / Bronze; Stainless Steel; Exotic Metal
- Valve Size: 0.12
from Continental Hydraulics
C03 MSV-P*. PILOT OPERATED CHECK VALVE. Mounting Surface NFPA D03 (ISO 4401-03-02-0-05). Max Pressure 5000 PSI (350 bar). Max Flow Rate 20 gpm (75 l/min). Description. This valve utilizes a guided spool and poppet-seat check valves as a blocking or load-holding device for high pressure applications. [See More]
- Valve Type: Cartridge; Check; Poppet
- Maximum Pressure: 5000.00
- Media: Hydraulic
- Actuation: Pilot
from Strataflo Products, Inc.
The No. 2300 is electroless nickel plated inside and outside, with all other internal parts of. stainless steel. An odorless, tasteless neoprene poppet is fully-formed around a solid steel. insert to provide greater strength in commercial applications. Designed to operate in any. position, a... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.75
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
80DICLVFD - Ductile iron check valve incorporates grooved locking Certa-Lok ® pipe connections. Fusion epoxy coated inside and out including poppet assembly, this valve is corrosion resistant and unleaded. High strength ductile iron body with stainless steel spring and NITRILE (Buna-N) seal. [See More]
- Valve Type: Check; Poppet
- Valve Size: 2.00 to 8.00
- Primary Material: Ductile Iron
- Maximum Pressure: 400.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.12 to 0.25
- Primary Material: Nylon (optional feature); PP (optional feature); PVDF (optional feature)
- Maximum Pressure: 125.00
from ASCO
For compressed air and vacuum, the Numatics poppet valves are ideal for single acting cylinders, air bellows, and vacuum material handling. Features: Solenoid pilot actuated. 3-way design. Use with air or neutral gas. AC & DC voltages available. Cad drawings available. High flow. Rugged design. [See More]
- Valve Type: Poppet; Solenoid
- Maximum Pressure: 24.00 to 145.00
- Media: Air; Compressed Air
- Number of Ports: 3
from HydraForce, Inc.
Hardened seat for long life and low leakage. 2 bias springs for back-pressure application flexibility. All HyPerformance products are tested to the rigorous standards of the NFPA specifi cation T.2.6. All HyPerformance valves are tested at a verifi cation level of 90% and an assurance of 99%. [See More]
- Valve Type: Pilot; Cartridge; Check; Poppet
- Media: Hydraulic
- Primary Material: Steel
- Maximum Pressure: 0.00 to 6090.00
from Check-All Valve Mfg. Co.
Flange Insert valves are the ultimate check valves in flanged systems. They provide the simplest most economical way to install check valves in a piping system, the valve body automatically positions the valve and holds it in place while bolts are being installed and tightened. All that is required... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Aluminum (optional feature); Brass / Bronze; Stainless Steel; Steel; Exotic Metal; PVC; PTFE; FEP Encapsulator
- Valve Size: 0.50
from Pneumadyne, Inc.
Cost effective, space saving solution for the use of single or multiple valves. A wide variety of connector, electrical and mounting options are available to accommodate numerous applications. Convenient Line & 90 ° Connectors (both with LED) provide quick electrical connection when used in... [See More]
- Valve Type: Control Valve; Directional; Lift Check; Check; Poppet
- Media: Water; Air; Compressed Air
- Primary Material: Brass / Bronze; Stainless Steel; Exotic Metal
- Valve Size: 0.12 to 0.25
from Continental Hydraulics
C05 MSV-P*. PILOT OPERATED CHECK VALVE. Mounting Surface NFPA D05 (ISO 4401-05-04-0-05). Max Pressure 4600 PSI (350 bar). Max Flow Rate 32 gpm (120 l/min). Description. This valve utilizes a guided spool and poppet-seat check valves as a blocking or load-holding device for high pressure... [See More]
- Valve Type: Cartridge; Check; Poppet
- Maximum Pressure: 4600.00
- Media: Hydraulic
- Actuation: Pilot
from Strataflo Products, Inc.
The No. 2400 is electroless nickel plated inside and outside, with all other internal parts of. stainless steel. The proprietary stainless steel poppets are finely machined for a metal-tometal. seal. Designed to operate in any position, a sensitive spring has been added to close the. poppet... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.38
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
80DIX - High strength epoxy coated ductile iron body features a double-guided ductile iron poppet. Designed for vertical and horizontal applications. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Valve Type: Check; Poppet
- Valve Size: 3.00 to 12.00
- Primary Material: Ductile Iron
- Maximum Pressure: 400.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.12 to 0.25
- Primary Material: PVC (optional feature); Nylon (optional feature); PP (optional feature); PVDF (optional feature); Makroblend®
- Maximum Pressure: 125.00
from ASCO
These 2-way normally closed valve bodies are designed for on/off control of commecial or industrial gas burners. The V710(B) is designed exclusively for use with the AH(E) Hydramotor® actuator. The AH(E) Hydramotor valve consists of two assemblies; the V710(B) valve body and the AH(E) Hydramotor... [See More]
- Valve Type: Poppet
- Media: Gas; Gasoline / Diesel Fuel
- Primary Material: Aluminum
- Valve Size: 1.00
from HydraForce, Inc.
The CRV08-20 cross-port relief uses two RV08-20 cartridges in an in-line plumbed housing. It is typically used to protect a hydraulic cylinder or motor from load-induced pressure surges. The cartridges used are screw-in, direct-acting, poppet-type valves, intended for use in lower flow circuits,... [See More]
- Valve Type: Cartridge; Poppet; Relief
- Media: Hydraulic
- Primary Material: Aluminum
- Maximum Pressure: 3306.86
from Check-All Valve Mfg. Co.
The Check-All Flanged & Drilled check valve is a one-piece cast body valve with ANSI/ASME B16.5 Class 150 flanged ends. The HVFD series valve is used when higher flow rates and lower pressure drops are required. The valve is available in sizes 1 through 10 inches and standard materials of 316... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Brass / Bronze; Stainless Steel; Steel
- Valve Size: 1.00
from Pneumadyne, Inc.
Cost effective, space saving solution for the use of single or multiple valves. A wide variety of connector, electrical and mounting options are available to accommodate numerous applications. Convenient Line & 90 ° Connectors (both with LED) provide quick electrical connection when used in... [See More]
- Valve Type: Control Valve; Directional; Poppet; Double Flow Control
- Media: Water; Air; Compressed Air
- Primary Material: Aluminum; Brass / Bronze; Stainless Steel; Exotic Metal
- Valve Size: 0.19
from Strataflo Products, Inc.
The Buna-N rubber poppet is molded to a stainless steel stem, with all other internal parts. also made of stainless steel. They are manufactured from a one piece cast brass body. The. unique strainer consists of a helically wound stainless steel spring wire which is durable and. cannot corrode. Each... [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 0.75
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
80MDI-VFD - High strength epoxy coated ductile iron body, high strength poppet and guide with threaded male x female NPT connection. Features a NITRILE (Buna-N) seal, stainless steel shaft, and ductile iron poppet. Designed for vertical or horizontal applications. For reference use only. Please... [See More]
- Valve Type: Check; Poppet
- Valve Size: 1.00 to 6.00
- Primary Material: Ductile Iron
- Maximum Pressure: 600.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.50
- Primary Material: PP (optional feature); PVDF (optional feature)
- Maximum Pressure: 125.00
from ASCO
For compressed air and vacuum, the Numatics poppet valves are ideal for single acting cylinders, air bellows, and vacuum material handling. Features: Solenoid external air pilot actuated. 3 ported, 2 position. For lubricated or non-lubricated service. Diaphram actuated. Polyurethane diaphragm. Cad... [See More]
- Valve Type: Poppet; Solenoid
- Maximum Pressure: 36.00 to 145.00
- Media: Air; Compressed Air
- Number of Ports: 3
from HydraForce, Inc.
A manual, 2-way, pull-to-open, screw-in hydraulic directional valve. [See More]
- Valve Type: Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.50
from Check-All Valve Mfg. Co.
The Check-All Flanged & Drilled - PTFE Lined check valve is a one-piece body valve with ANSI/ASME flanged ends. The valve has a solid one-piece PTFE liner, which covers the flange faces out to the raised face diameter. All wetted surfaces are fluoropolymer (PTFE/FEP/PFA) including the FEP... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Steel; FEP Encapsulator
- Valve Size: 1.00
from Pneumadyne, Inc.
Cost effective, space saving solution for the use of single or multiple valves. A wide variety of connector, electrical and mounting options are available to accommodate numerous applications. Convenient Line & 90 ° Connectors (both with LED) provide quick electrical connection when used in... [See More]
- Valve Type: Control Valve; Directional; Poppet; Quick Exhaust Valve
- Media: Air; Compressed Air
- Primary Material: Aluminum; Brass / Bronze; Stainless Steel; Exotic Metal
- Valve Size: 0.12
from Strataflo Products, Inc.
An EPD poppet is attached to a stainless steel stem, with all other internal parts also made of. stainless steel. They are manufactured from a one piece cast brass body. The unique strainer. consists of a helically wound stainless steel spring wire which is durable and cannot corrode. Each valve is... [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 0.75
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
80DIMCLVFD - Ductile iron check valve incorporates grooved locking Certa-Lok ® pipe connections. Fusion epoxy coated inside and out including poppet assembly, this valve is corrosion resistant and unleaded. High strength ductile iron body with stainless steel spring and NITRILE (Buna-N) seal. [See More]
- Valve Type: Check; Poppet
- Valve Size: 2.00 to 8.00
- Primary Material: Ductile Iron
- Maximum Pressure: 400.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.75
- Primary Material: PP (optional feature); PVDF (optional feature)
- Maximum Pressure: 125.00
from ASCO
For compressed air and vacuum, the Numatics poppet valves are ideal for single acting cylinders, air bellows, and vacuum material handling. Features: Solenoid pilot actuated. 3-way design. Use with air or neutral gas. Internal vacuum pilot operated. AC & DC voltages available. Cad drawings... [See More]
- Valve Type: Poppet; Solenoid
- Maximum Pressure: 30.00 to 145.00
- Media: Air; Compressed Air
- Number of Ports: 2
from HydraForce, Inc.
A manual, 2-way, normally closed, pull-to-open, spring-return, screw-in, hydraulic cartridge, system unloading valve for higher tank pressure applications. [See More]
- Valve Type: Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.50
from Check-All Valve Mfg. Co.
The Lined Pipe Insert valve is designed to mate between two flanges on most lined pipe systems. It provides the simplest most economical way to install a check valve in a lined piping system. No gaskets are required, just spread the flanges, center the valve and bolt the flanges together. Lined Pipe... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Exotic Metal; PTFE; FEP Encapsulator
- Valve Size: 1.00
from Pneumadyne, Inc.
Shuttle valves, also known as “OR ” valves, automatically select the higher of two pressures allowing flow from one input to the output port. Pneumadyne offers a large variety of porting options for plumbing convenience. The SSV-10A Series features. barbed ports and Pneumadyne ’s... [See More]
- Valve Type: Control Valve; Directional; Poppet; Shuttle Valve
- Media: Water; Air; Compressed Air
- Primary Material: Aluminum; Brass / Bronze; Stainless Steel; Steel
- Valve Size: 0.06 to 0.19
from Strataflo Products, Inc.
The No. 300 check valve is made of a one-piece cast brass body. Designed to operate in any. position, a sensitive spring has been added to close the poppet automatically. The rubber. poppet is fully-formed around a solid steel insert to provide greater strength in commercial. applications. Each... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.50
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
82DI-VFD - High strength epoxy coated ductile iron body, poppet and stainless steel guide with threaded male x male connection. Features a NITRILE (Buna-N) seal, stainless steel shaft, and ductile iron poppet. Designed for vertical or horizontal applications. For reference use only. Please check... [See More]
- Valve Type: Check; Poppet
- Valve Size: 2.00 to 8.00
- Primary Material: Ductile Iron
- Maximum Pressure: 600.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.25 to 0.38
- Primary Material: PP (optional feature); PVDF (optional feature)
- Maximum Pressure: 125.00
from HydraForce, Inc.
A cam-operated, two-way, normally-closed poppet-type directional valve. [See More]
- Valve Type: Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Maximum Pressure: 3002.28
from Check-All Valve Mfg. Co.
The Check-All Mini-Check is a three piece constructed check valve. The valve is designed for minimum pressure drops. The three piece construction permits many combinations of end fittings, which makes the valve adaptable for nearly every application. The Mini-Check is available with 1/8, 1/4, and... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Titanium
- Valve Size: 0.12
from Strataflo Products, Inc.
The No. 352 check valve is made of a one-piece cast brass body with heavy bosses added for. leak-proof side connections. Designed to operate in any position, a sensitive spring has been. added to close the poppet automatically. The rubber poppet is fully-formed around a solid. steel insert to... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 1.00
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
82DP - Dual purpose compact ductile iron reduced ported check valve with female and male threads on both ends. High strength ductile iron body and poppet, with stainless steel spring and fasteners. Designed to fit into tight-fitting wells. For reference use only. Please check Flomatic's website for... [See More]
- Valve Type: Check; Poppet
- Valve Size: 2.50 to 6.00
- Primary Material: Ductile Iron
- Maximum Pressure: 400.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.25 to 0.38
- Primary Material: PP (optional feature); PVDF (optional feature)
- Maximum Pressure: 125.00
from HydraForce, Inc.
A 3-way, manual, pull-to-shift, spring-return, directional hydraulic cartridge valve. Series operation is prohibited due to the tank port pressure rating. [See More]
- Valve Type: Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.38
from Check-All Valve Mfg. Co.
The Sanitary Cartridge Valve is a 316 stainless steel check valve for use in new or existing sanitary systems. The SCV design seals on the ID of sanitary ferrules with replaceable food grade seals (Standard is FDA EPDM). The valves fit the Alfa Laval Inc. Bevel Seat and Tri-Clamp ® fittings, the... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Cartridge; Check; Poppet; Relief; Sanitary; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Steam; Liquids; Air; Chemical
- Primary Material: Stainless Steel
- Valve Size: 0.75
from Strataflo Products, Inc.
The No. 375 check valve is made of a one-piece cast brass body. Designed to operate in any. position, a sensitive spring has been added to close the poppet automatically. The rubber. poppet is fully-formed around a solid steel insert to provide greater strength in commercial. applications. Each... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.50
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
104P - Reinforced nylon body with threaded female connection. Polyethylene strainer, polyethylene/acetal poppet. NITRILE (Buna-N) seal and stainless steel spring. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 1.00 to 1.25
- Primary Material: Nylon
- Maximum Pressure: 150.00
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. manufactures a diverse line of check valves made of brass, electroless nickel plated brass & stainless steel. Designs promote multiple configuration, sizes & materials. Options & application include, but are not limited to the following: Pipe Thread (NPT), Hose... [See More]
- Valve Type: Check; Poppet
- Valve Size: 0.31
- Primary Material: Stainless Steel
- Maximum Pressure: 5000.00
from HydraForce, Inc.
A 3-way, manual, pull-to-shift, spring-return, directional hydraulic cartridge valve. [See More]
- Valve Type: Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.38
from Check-All Valve Mfg. Co.
For over 35 years, the compact, fluoropolymer (PTFE/FEP/PFA), Sanitary Insert Valve has been used as the most economical solution to providing a check valve in a new or existing sanitary piping system. This valve style is designed to fit into grooved-end clamp-type fittings. Since the Sanitary... [See More]
- Valve Type: Directional; Lift Check; Back Flow; Check; Poppet; Relief; Sanitary; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Steam; Liquids; Air; Chemical
- Primary Material: PTFE; FEP Encapsulator
- Valve Size: 0.75
from Strataflo Products, Inc.
Strataflo 400 Series check valves with metal poppets are ruggedly constructed and are. suitable for use in a wide variety of heavy industrial applications. The proprietary stainless. steel poppets are finely machined for a metal-to-metal seal. Each valve is tested twice for. casting integrity and... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.38
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
124P- FOOT VALVE - features a simple flow through design with corrosion resistant parts and feature a tapered composite strainer and poppet. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Valve Type: Foot Valve; Check; Poppet
- Maximum Pressure: 150.00
- Valve Size: 0.75 to 2.00
- Media Temperature: 140
from Specialty Manufacturing Co. (The)
The Specialty Mfg. Co. is committed to providing quality, custom solutions which meet our customers ’ unique needs. We provide a highly valued experience for our customers and employees by making all our business partnerships enjoyable, professional and profitable. [See More]
- Valve Type: Check; Poppet
- Valve Size: 1.00
- Primary Material: Stainless Steel
- Maximum Pressure: 200.00
from HydraForce, Inc.
A 4-way, manual, pull-to-shift, spring-return, directional hydraulic cartridge valve. Series operation is prohibited due to the tank port pressure rating. [See More]
- Valve Type: Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.38
from Check-All Valve Mfg. Co.
The 3-A Sanitary Check Valve is an all 316/316L stainless steel check valve with a standard 32 Ra or better finish, (finer available) for use in new or existing sanitary systems. The 3SC design seals on the ID of sanitary ferrules with 3-A specified materials (standard is EPDM). The valve seals... [See More]
- Valve Type: Directional; Lift Check; Back Flow; Check; Poppet; Relief; Sanitary; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Steam; Liquids; Air
- Primary Material: Stainless Steel
- Valve Size: 1.00
from Strataflo Products, Inc.
Our No.F200 valves feature lead free NSF-certified material, containing ≤ 0.25% lead by weighted average. The lead-free series is compliant with California AB1953 and Vermont Act 193. They are manufactured. from a one-piece cast brass body. The unique strainer consists of a helically wound... [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 0.75
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
190D - Acetal body and strainer, Nylon 11 poppet. Stainless steel spring and NITRILE (Buna-N) seal. 193D - Similar to the 190D with one-piece acetal body and strainer. 190P - Polypropylene body and strainer. Stainless steel spring and VITON seal. For reference use only. Please check Flomatic's... [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 0.38 to 2.00
- Primary Material: Acetal
- Maximum Pressure: 150.00
from HydraForce, Inc.
A low leakage, pilot-operated motion control valve designed to regulate the lowering of over-running loads, while providing free reverse fl ow and thermal relief protection at the actuator. [See More]
- Valve Type: Balancing; Pilot; Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.38
from Check-All Valve Mfg. Co.
The Straight Sided Insert is a thread less check valve. designed to be inserted into any cavity where a check valve is needed and threads are not desired. Available Materials: 316 Stainless Steel (SS). Carbon Steel (CS). Alloy 20 (A2). Alloy C-276 (HC). Brass (BR). Alloy B (HB). MONEL ® (MO) [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Alloy 20, Alloy C-276,, Titanium
- Valve Size: 0.50
from Strataflo Products, Inc.
Our No.F2400 valves feature lead free NSF-certified material, containing ≤ 0.25% lead by. weighted average. The lead-free series is compliant with California AB1953 and Vermont Act. 193. The valve is also electroless nickel plated inside and outside. The proprietary stainless steel. poppets are... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.38
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
333E-ENVIRO FOOT VALVE - body with high strength acetal poppet. Tapered stainless steel strainer, end cap, spring and fasteners. NITRILE (Buna-N) seal. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Valve Type: Foot Valve; Check; Poppet
- Maximum Pressure: 250.00
- Valve Size: 1.00 to 1.25
- Media Temperature: 180
from HydraForce, Inc.
A poppet-type, screw-in, cartridge-style, hydraulic directional element, with multi-function potential when used with other directional, pressure, or fl ow control devices. [See More]
- Valve Type: Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Maximum Pressure: 5076.32
from Check-All Valve Mfg. Co.
The Tubing Check Valve-Flared is a three piece constructed valve with 37 º flared ends which conform to J. I. C. and S. A. E. Hydraulic Standards. These valves are designed for maximum flow with minimal pressure drop. Available Materials: 316 Stainless Steel (SS). Brass (BR). Carbon Steel (CS) [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Titanium
- Valve Size: 0.25
from Strataflo Products, Inc.
Now offering our same high quality valves with lead-free materials, certified by NSF to. contain less than 0.25% lead by weighted average. The lead-free series is compliant with. California AB1953 and Vermont Act 193. The lead-free line comes standard with a Buna-S. rubber poppet, an extremely... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.50
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
333SS- FOOT VALVE - All 303 Stainless steel body with high strength acetal poppet. Tapered stainless steel strainer, end cap, spring and fasteners. NITRILE (Buna-N) seal. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 1.00 to 1.25
- Primary Material: Stainless Steel
- Maximum Pressure: 250.00
from HydraForce, Inc.
A solenoid-operated, 2-way, normally closed, piloted poppet-type, screw-in hydraulic cartridge valve, intended to act as a blocking or load-holding device for low flow circuits. [See More]
- Valve Type: Directional; Cartridge; Poppet; Solenoid
- Media: Hydraulic
- Primary Material: Steel
- Valve Size: 0.38
from Check-All Valve Mfg. Co.
The Tubing Check Valve is a three piece constructed check valve with flareless tube ends. The valve is designed for minimum pressure drops. The valves are furnished complete with ferrules and nuts. Available Materials: 316 Stainless Steel (SS). Brass (BR). Carbon Steel (CS) [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Titanium
- Valve Size: 0.12
from Strataflo Products, Inc.
Our No.F400 valves feature lead free NSF-certified material, containing ≤ 0.25% lead by. weighted average. The lead-free series is compliant with California AB1953 and Vermont Act. 193. The proprietary stainless steel poppets are finely machined for a metal-to-metal seal. Each valve is tested... [See More]
- Valve Type: Lift Check; Check; Poppet
- Valve Size: 0.38
- Primary Material: Brass / Bronze
- Maximum Pressure: 200.00
from Flomatic Valves
60SE-ENVIRO FOOT VALVE - body with threaded female connection. Features a NITRILE (Buna-N) seal, acetal poppet (2 ½", 3" and 4" have bronze poppets) stainless steel spring and strainer. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Valve Type: Foot Valve; Check; Poppet
- Maximum Pressure: 250.00
- Valve Size: 0.50 to 4.00
- Media Temperature: 180
from HydraForce, Inc.
A proportional solenoid-operated, 2-way, poppet-type, normally closed, screw-in hydraulic cartridge valve for low-leakage blocking and load-holding applications. [See More]
- Valve Type: Directional; Metering; Pilot; Cartridge; Poppet
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.75 to 1.00
from Check-All Valve Mfg. Co.
The Union Insert Valve is the threaded pipe counterpart of the Flange Insert Valve. Designed to be inserted into most standard ground joint unions, it provides the simplest and most economical way to install a check valve in a threaded pipe system. A check valve may be installed anywhere in the... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Alloy 20, Alloy C-276, Titanium
- Valve Size: 0.50
from Flomatic Valves
63 - Cast iron body with epoxy coating. Features threaded female connection. NITRILE (Buna-N) seal, high strength non-metallic or unleaded bronze or ductile iron poppet, stainless steel spring. Heavy-duty polyethylene strainer. For reference use only. Please check Flomatic's website for the latest... [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 2.00 to 6.00
- Primary Material: Cast Iron
- Maximum Pressure: 250.00
from HydraForce, Inc.
A screw-in, cartridge-style, direct-acting, differential area, poppet-type, bi-directional relief valve, intended for use as a pressure limiting device in demanding hydraulic circuits. [See More]
- Valve Type: Cartridge; Poppet; Relief
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.38
from Check-All Valve Mfg. Co.
The Universal High Pressure check valve is a one piece body machined from bar stock with female pipe threads. The valve is designed and manufactured for high pressure applications. For applications below 3000 PSIG, view our UN-3 series. Available Materials: 316 Stainless Steel (SS). Alloy B (HB). [See More]
- Valve Type: Directional; Metal Seated; Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Aluminum (optional feature); Stainless Steel; Steel; Exotic Metal; Alloy 20, Alloy C-276, Titanium
- Valve Size: 0.38
from Flomatic Valves
80S6FVFD - Foot Valve- All 316 stainless steel threaded check valve body. Stainless steel spring, poppet, strainer and Buna-N seal. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Valve Type: Foot Valve; Check; Poppet
- Valve Size: 1.00 to 10.00
- Primary Material: Stainless Steel
- Maximum Pressure: 400.00
from HydraForce, Inc.
A screw-in, cartridge-style, direct-acting, differential area, poppet-type, bi-directional relief valve. [See More]
- Valve Type: Cartridge; Poppet; Relief
- Media: Hydraulic
- Primary Material: Aluminum
- Valve Size: 0.25 to 0.38
from Check-All Valve Mfg. Co.
The Universal Low Pressure check valve is a one piece body machined from bar stock and is designed for minimum pressure drop. The valve is light, compact, and provides maintenance free dependable service. For applications above 3000 PSIG, view our UN-10 series. For applications where weld joint are... [See More]
- Valve Type: Directional; Metal Seated (optional feature); Lift Check; Back Flow; Check; Poppet; Relief; Anti-Siphon
- Media: Water; Hot Water; Cold Water ; Ground Water; Potable Water; Salt Water (optional feature); Gas; Gasoline / Diesel Fuel (optional feature); High Purity (optional feature); LP Gas (optional feature); Natural Gas (optional feature); Sour Gas (optional feature); Specialty Corrosive (optional feature); Hydraulic; Steam; Liquids; Air; Chemical
- Primary Material: Aluminum (optional feature); Brass / Bronze; Stainless Steel; Steel; Exotic Metal; Alloy 20, Alloy C-276, Titanium
- Valve Size: 0.38