Pneumatic Motor / System Motor Controllers
from Enfield Technologies
Enfield Technologies ’ LS - C41 pneumatic systems controllers offer flexible PID with feed - forward control topology for the serious control systems engineer. The LS - C41contains the driver f or those valves that require it. The LS - C41 ’s adjustable gain, dead-band, and dither (both... [See More]
- Motor / System: Linear; Pneumatic
- DC Input: 18 to 36
- Axes: 1.0
- Power: 30
from Enfield Technologies
The LS-C10 is a proportional system controller and driver. It is primarily used in conjunction with Enfield Technologies valves and other components to create pneumatic sub-systems. It may also be used to control or drive certain hydraulic and electric motors and systems. The LS-C10 can be... [See More]
- Motor / System: Linear; Pneumatic; Hydraulic
- DC Input: 12 to 15
- Axes: 1.0
- Power: 25 to 30
from Enfield Technologies
The C1 provides compact high flexibility controller in combination with efficient PWM-based valve driver designed to maximize the performance of LS and Enfinity valves. This powerful combination yields the ideal solution delivering exceptional pressure, position, force, vacuum and flow controls. [See More]
- Motor / System: Pneumatic
- Axes: 1.0
- Product: Pulse Width Modulation Drive
- DC Input: 12 to 24
from Enfield Technologies
The D1 PWM Valve Driver is designed specifically to drive and manage Enfield Technologies proportional valves. It converts a proportional command voltage into a -1.1 …1.1A current signal to drive the valve ’s linear force motor (different from a solenoid valve). Its on board electronics... [See More]
- Motor / System: Linear; Pneumatic
- Axes: 1.0
- Product: Pulse Width Modulation Drive
- DC Input: 12 to 24
from Enfield Technologies
Enfield ’s S2 is a servo pneumatic proportional control system offering an all in one pneumatic system capable of positioning heavy loads at high speeds for lower cost than competing electric drives and hydraulic systems. Simple by design, the S2 has an integrated controller, removing the need... [See More]
- Motor / System: Pneumatic
- DC Input: 12 to 24
- Axes: 1.0
- Power: 20