Home / Limit Switch Input Motor Controllers
from PI (Physik Instrumente) L.P.
Key Features. 62.5 µs (250 µs) microsecond per axes servo update rate. Up to 8 axes of motion control. Controls servo motors, step motors, and hydraulics. Maximum encoder input rate up to 22 MHz (Accelera). Non-volatile program memory. Multitasking of four independent programs. Modes of... [See More]
- Features: Limit Switch
- Resolution: 12
- Product: PC-Based
- PC-Based Bus: PCI
from PI (Physik Instrumente) L.P.
High Performance Precision Motion Control at Low Cost. 20 MHz Encoder Input for High Speed & Resolution. Macro Programmable Stand-Alone Functionality. Integrated Servo Power Amp Supplies up to 30 W. Data Recorder. Network Capability for Multi-Axis Applications. Non-Volatile EEPROM for Macros and... [See More]
- Features: Limit Switch
- DC Input: 15 to 30
- Axes: 2.0
- Power: 30
from PI (Physik Instrumente) L.P.
High Performance Stepper Motion Control at Low Cost. 2,048 Micro step Resolution for Very Smooth Motion. Open Loop and Closed Loop Operation. Network Capability for Multi-Axis Applications. Compatible and Networkable with Mercury ™ Controllers. Joystick Port for Manual Control. Non-Volatile... [See More]
- Features: Limit Switch
- DC Input: 24
- Axes: 1.0 to 2.0
- Setup: Joystick; Computer
from PI (Physik Instrumente) L.P.
Broadband encoder input. Macro programmable for stand- alone. functionality. Data recorder. Nonvolatile EEPROM for macros and parameters. Digital I/ O ports (TTL). ID chip support. Interfaces: TCP/ IP and USB. Optional digital joystick for manual operation. Digital servo controller for piezo inertia... [See More]
- Features: Limit Switch
- Axes: 3.0
- Product: Multi-Axis
- DC Input: 24
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Features: Soft Start; Limit Switch; Auxiliary I/O; Alarm / Status Monitoring
- Axes: 1.0
- Product: Controller / Drive; Pulse Width Modulation Drive; DSP
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Microstepping Motor; Linear
from Electro-Sensors, Inc.
Closed Loop Motor Speed Controller. Features. • Security lockout. • Diagnostics for easy troubleshooting. • Isolated speed reference signal. • 0.02% speed regulation in master and follower mode. • Complete I/O isolation. The MS320 is a cost-effective way to add digital PID... [See More]
- Features: Limit Switch; Auxiliary I/O; Alarm / Status Monitoring
- Resolution: 12
- Product: Speed Controller
- Axes: 1.0
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Features: Dynamic Braking; Limit Switch
- Axes: 1.0 to 1.5
- Product: Speed Controller; Amplifier; Variable Speed
- AC Input: 20 to 264
from Data Device Corporation (DDC)
The PW-87 series is a modular and scalable DSP-based, full featured motor controller that offers multi-interface position, torque, and speed control, and is designed for demanding high reliability industrial, military, and aerospace applications. Benefits. Fully Integrated, Plug & Play Bus... [See More]
- Features: Limit Switch
- Voltage: 600 to 1200
- Product: Speed Controller
- Continuous Current: 75
from Dart Controls, Inc.
The Accu-Set is a compact, economical control that can be used with conventional AC, DC, or Brushless DC adjustable speed drive systems to provide an LED display of set speeds and precise, digital closed loop motor speed control. An on-board microprocessor with non-volatile memory coupled with... [See More]
- Features: Limit Switch; Auxiliary I/O; Alarm / Status Monitoring
- Axes: 1.0
- Product: Speed Controller; Variable Speed; Silicon Controlled Rectifier Drive
- Motor / System: DC Brushless; DC Servo; AC Servo
from Yamaha Motor- Robot Division
TS-S2 is positioned type controller that only performs point trace. No program is needed. Operation is simple. After setting point data, specify the point number and enter a START signal from host controller such as a PLC. Positioning or pushing operation then begins. [See More]
- Features: Limit Switch
- DC Input: 24
- Axes: 1.0
- Servo Feedback: Incremental Encoder
from Progressive Automations
The Brushless DC Motor Controller is used for controlling actuators with brushless DC motors. It can extend and retract the actuator as well as control the speed externally with a potentiometer connected between 'SPD' and 'GND'. It is only compatible with brushless DC motors. Our PA-14 and PA-14P... [See More]
- Features: Limit Switch; Self Configuration
- DC Input: 12 to 24
- Product: Speed Controller
- Power: 100 to 200
from Velmex, Inc.
The VXM is a high integration stepping motor controller for “plug and run ” with Velmex motor driven products. Reliable. performance is achieved with a powerful RISC Microcontroller that directly controls motor phase switching and all other. interface functions. The VXM uses an optimized... [See More]
- Features: Limit Switch; Auxiliary I/O; Self Diagnostics
- Axes: 1.0
- Product: Controller / Drive; MCU
- Motor / System: Unipolar; Hybrid; Half-Step
from Aerotech, Inc.
Design Features. 3U, 19-inch rack-mount design with integral drives. Flexible design provides the ability to drive brush, brushless, or stepper motors with the same amplifier. 5 A continuous, 10 amp peak output current. PWM or linear amplifiers. Integral power supplies. IEEE-1394 FireWire interface. [See More]
- Features: Brake Output (optional feature); Limit Switch; Auxiliary I/O
- Resolution: 12
- Product: Controller / Drive; Multi-Axis
- Axes: 4.0 to 8.0
from Electro-Sensors, Inc.
Synchronous Controller for Motor Drives. Features. • Index-follower (event/phase synchronization),. Ratio-follower (electronic line-shaft) and Master modes. • Smooth, tight closed-loop PID control re-calculates. 1024 times/s. • 6 digit setpoint precision with full decimal point... [See More]
- Features: Limit Switch; Auxiliary I/O; Alarm / Status Monitoring; Self Configuration; Self Diagnostics
- Resolution: 12
- Product: Speed Controller
- Axes: 1.0
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Features: Dynamic Braking; Limit Switch
- Axes: 1.0 to 1.5
- Product: Speed Controller; Amplifier; Variable Speed
- AC Input: 20 to 264
from Aerotech, Inc.
Design Features. Single-axis digital servo controller with integral power supply and amplifier. Advanced software architecture shortens customer development time; use C#, VB.Net, C, and LabVIEW?? combined with our full IDE and multitasking operating system. Host-mode operation allows you to send... [See More]
- Features: Soft Start; Limit Switch; Auxiliary I/O; Alarm / Status Monitoring
- Axes: 1.0
- Product: Controller / Drive; Pulse Width Modulation Drive; DSP
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Microstepping Motor; Linear
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Features: Dynamic Braking; Limit Switch
- Axes: 1.0 to 1.5
- Product: Speed Controller; Amplifier; Variable Speed
- AC Input: 20 to 264
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Features: Dynamic Braking; Limit Switch
- Axes: 1.0 to 1.5
- Product: Speed Controller; Amplifier; Variable Speed
- AC Input: 90 to 264
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Features: Dynamic Braking; Limit Switch
- Axes: 1.0 to 1.5
- Product: Speed Controller; Amplifier; Variable Speed
- AC Input: 90 to 264