Manual Motor Controllers
from Ziehl-Abegg Inc.
Specification: For simple manual speed regulation 5-step transformer-based controllers for single-phase and three-phase fans are available. We supply the corresponding switchgear for multi-speed motors. Motor protection devices are available for thermal monitoring based on thermostats or thermistors... [See More]
- Setup: Manual
- AC Input: 230
- Product: Speed Controller; Variable Speed
- Phase : Single Phase
from Critical Velocity Enterprises, LLC
The BIDIR-309 is a fully solid-state motor controller that allows you to control the speed and direction of a brushed DC motor using a potentiometer or a 0-5V voltage level. Logic DIR and BRAKE inputs control motor direction and braking. Automatic current limiting protects the controller and motor... [See More]
- Setup: Manual
- Motor / System: DC Brushed
- Product: Speed Controller
- DC Input: 6 to 26
from Velmex, Inc.
The VXM is a high integration stepping motor controller for “plug and run ” with Velmex motor driven products. Reliable. performance is achieved with a powerful RISC Microcontroller that directly controls motor phase switching and all other. interface functions. The VXM uses an optimized... [See More]
- Setup: Manual; Joystick (optional feature); Computer
- Axes: 1.0
- Product: Controller / Drive; MCU
- Motor / System: Unipolar; Hybrid; Half-Step
from Joyce/Dayton Corp.
Joyce/Dayton offers standard motor starter controls for one-third to 15 horsepower motors in a variety of voltages. These motor starters are the heart of basic control systems for motorized jacks, actuators, electric cylinders, and ComDRIVE ® systems. They include extend and retract push buttons... [See More]
- Setup: Manual
- Phase : Single Phase (optional feature); Three Phase
- AC Input: 200 to 575
- Frequency: 50 Hz (optional feature)
from Enfield Technologies
Enfield Technologies ’ LS - C41 pneumatic systems controllers offer flexible PID with feed - forward control topology for the serious control systems engineer. The LS - C41contains the driver f or those valves that require it. The LS - C41 ’s adjustable gain, dead-band, and dither (both... [See More]
- Setup: Manual
- Motor / System: Linear; Pneumatic
- Axes: 1.0
- DC Input: 18 to 36
from Progressive Automations
The Brushless DC Motor Controller is used for controlling actuators with brushless DC motors. It can extend and retract the actuator as well as control the speed externally with a potentiometer connected between 'SPD' and 'GND'. It is only compatible with brushless DC motors. Our PA-14 and PA-14P... [See More]
- Setup: Manual
- DC Input: 12 to 24
- Product: Speed Controller
- Power: 100 to 200
from Sinotech
Motor controllers can be customized upon request. [See More]
- Setup: Manual
- Axes: 1.0
- Product: Speed Controller
- Motor / System: Induction
from Pittman Motors
PITTMAN ® integrated brushless DC motor and controller packages are designed to simplify system integration, minimize interconnection cabling, and reduce or eliminate noise and motor / drive compatibility issues. [See More]
- Setup: Manual
- Motor / System: DC Brushless
- Axes: 1.0
- DC Input: 11 to 52
from Critical Velocity Enterprises, LLC
Control the speed and direction of a DC motor using any 1k to 30k potentiometer. This PWM motor controller runs cool while handling up to 15 amps of continuous current. Features: Use any 1k to 30k pot for control Digital input filtering allows smooth control even with dirty pots Logic Controller... [See More]
- Setup: Manual
- Motor / System: DC Brushed
- Product: Speed Controller
- DC Input: 10 to 26
from Joyce/Dayton Corp.
Joyce/Dayton offers Variable Speed Positioning Systems (VSPS) for one-third to 3 horsepower motors in a variety of voltages. Variable speed positioning systems are programmable controllers that increase the capability of motorized jacks and actuators by allowing the operator to easily program up to... [See More]
- Setup: Manual
- AC Input: 208 to 575
- Product: Variable Speed
- Configuration: Stand Alone
from Enfield Technologies
The LS-C10 is a proportional system controller and driver. It is primarily used in conjunction with Enfield Technologies valves and other components to create pneumatic sub-systems. It may also be used to control or drive certain hydraulic and electric motors and systems. The LS-C10 can be... [See More]
- Setup: Manual
- Motor / System: Linear; Pneumatic; Hydraulic
- Axes: 1.0
- DC Input: 12 to 15
from Sinotech
Motor controllers can be customized upon request. [See More]
- Setup: Manual
- Axes: 1.0
- Product: Speed Controller
- Motor / System: Induction
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k to 30k potentiometer, 0-5V signal, push buttons or logic pulses from a microcontroller. This controller features a silent PWM switching frequency for use in noise-sensitive applications. It can also be used as a low voltage light dimmer for halogen lamps,... [See More]
- Setup: Manual
- Motor / System: DC Brushed
- Product: Speed Controller
- DC Input: 6 to 36
from Enfield Technologies
The C1 provides compact high flexibility controller in combination with efficient PWM-based valve driver designed to maximize the performance of LS and Enfinity valves. This powerful combination yields the ideal solution delivering exceptional pressure, position, force, vacuum and flow controls. [See More]
- Setup: Manual
- Axes: 1.0
- Product: Pulse Width Modulation Drive
- Motor / System: Pneumatic
from Critical Velocity Enterprises, LLC
This Analog / Digital PWM Controller gives you the most flexibility for your application. Give your project a high-tech feel with push button speed control. It can also be used as a low voltage light dimmer for halogen lamps, or for controlling heaters and irons. 4 Ways to Control: Analog: Use any... [See More]
- Setup: Manual
- Motor / System: DC Brushed
- Product: Speed Controller
- DC Input: 6 to 36
from Enfield Technologies
The D1 PWM Valve Driver is designed specifically to drive and manage Enfield Technologies proportional valves. It converts a proportional command voltage into a -1.1 …1.1A current signal to drive the valve ’s linear force motor (different from a solenoid valve). Its on board electronics... [See More]
- Setup: Manual
- Axes: 1.0
- Product: Pulse Width Modulation Drive
- Motor / System: Linear; Pneumatic
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k to 30k potentiometer. This PWM motor controller runs cool while handling up to 10 amps of continuous current. It can also be used as a low voltage light dimmer for halogen lamps, or for controlling heaters and irons. Features: Use any 1k to 30k pot for... [See More]
- Setup: Manual
- Motor / System: DC Brushed
- Product: Speed Controller
- DC Input: 6 to 58
from Enfield Technologies
Enfield ’s S2 is a servo pneumatic proportional control system offering an all in one pneumatic system capable of positioning heavy loads at high speeds for lower cost than competing electric drives and hydraulic systems. Simple by design, the S2 has an integrated controller, removing the need... [See More]
- Setup: Manual
- Motor / System: Pneumatic
- Axes: 1.0
- DC Input: 12 to 24