IC / PCB-Mounted Motor Controllers
from DigiKey
Motor Driver PWM 10-MSOP [See More]
- Configuration: PCB Mount; "10-TFSOP, 10-MSOP (0.118"", 3.00mm Width)"
- AC Input: 4 to 18
- Motor / System: DC Brushless
- DC Input: 4 to 18
from Texas Instruments
24-V, 3-Phase Sensorless BLDC Motor Controller 24-HTSSOP -40 to 125 [See More]
- Configuration: PCB Mount
- Peak Current: 3
- DC Input: 8 to 28
- Operating Temperature: -40 to 125
from PI (Physik Instrumente) L.P.
Motor control, servo control, and protective functions1 motor channel, 1 sensor channel. For three-phase linear motors with currents of 5 A per phase. Sine-commutated operation, field-oriented current control. Automatic adjustment of the commutation angle. PID controller for position and velocity. [See More]
- Configuration: PCB Mount
- Motor / System: Linear
- Axes: 1.0
- DC Input: 24 to 48
from Infineon Technologies AG
The MOTIX ™ IFX9201SG a general purpose 6A H-bridge for industrial applications, home appliance and building automation, power tools battery management and medical applications, designed for the control of small DC motors and inductive loads is available from Infineon now. The outputs can be... [See More]
- Configuration: PCB Mount
- DC Input: 5 to 36
- Motor / System: DC Brushed
- Operating Temperature: -40 to 125
from DigiKey
40V 3-PHASE GATE DRIVER WITH INT [See More]
- Configuration: PCB Mount; 40-VFQFN Exposed Pad
- AC Input: 6 to 28
- Motor / System: DC Brushless
- DC Input: 6 to 28
from Texas Instruments
12-V, 3-Phase Sensorless BLDC Motor Controller 16-HTSSOP -40 to 85 [See More]
- Configuration: PCB Mount
- Peak Current: 2
- DC Input: 5 to 16
- Operating Temperature: -40 to 85
from Infineon Technologies AG
The MOTIX ™ TLE 7209-2R H-Bridge is protected against over-temperature and short circuits and has an under voltage lockout for all the supply voltages “VS ” (main DC power supply). All malfunctions cause the output stages to go tristate. The device is configurable by the DMS pin. [See More]
- Configuration: PCB Mount
- DC Input: 5 to 28
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
40V 3-PHASE GATE DRIVER WITH INT [See More]
- Configuration: PCB Mount; 48-TQFP Exposed Pad
- AC Input: 6 to 28
- Motor / System: DC Brushless
- DC Input: 6 to 28
from Texas Instruments
3-Phase BLDC Controller and Pre-Driver (PWM ctrl) 40-VQFN -40 to 125 [See More]
- Configuration: PCB Mount
- DC Input: 8 to 32
- Product: Pulse Width Modulation Drive
- Operating Temperature: -40 to 125
from Infineon Technologies AG
The MOTIX ™ TLE4207G is a protected Dual-Half-Bridge-Driver designed specially for automotive and industrial motion control applications. The part is built using the Infineon bipolar high voltage power technology DOPL. The actuator (DC motor) can be connected direct between the halfbridges. [See More]
- Configuration: PCB Mount
- DC Input: 8 to 18
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Power MOSFET Parallel 28-QFN (4x4) [See More]
- Configuration: PCB Mount; 28-VFQFN Exposed Pad
- AC Input: 5 to 60
- Motor / System: DC Brushless
- DC Input: 5 to 60
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI. The half bridge drivers are designed to drive DC motor loads in sequential operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are controlled via... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 20
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Multiphase Motor Driver Power MOSFET PWM 28-QFN (4x5) [See More]
- Configuration: PCB Mount; 28-VFQFN Exposed Pad
- AC Input: 8 to 14
- Motor / System: DC Brushless
- DC Input: 8 to 14
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 20
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
5V TO 35V, THREE-PHASE, BRUSHLES [See More]
- Configuration: PCB Mount; "28-TSSOP (0.173"", 4.40mm Width) Exposed Pad"
- AC Input: 5 to 35
- Motor / System: DC Brushless
- DC Input: 5 to 35
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 20
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
IC MTR DRVR MULTPHAS 5-55V 40QFN [See More]
- Configuration: PCB Mount; 40-VFQFN Exposed Pad
- AC Input: 5 to 55
- Motor / System: DC Brushless
- DC Input: 5 to 55
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 20
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Multiphase Motor Driver Power MOSFET SPI 32-QFN (5x5) [See More]
- Configuration: PCB Mount; 32-VFQFN Exposed Pad
- AC Input: 6 to 40
- Motor / System: DC Brushed
- DC Input: 6 to 40
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 20
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Bipolar Motor Driver HVCMOS SPI 28-SO [See More]
- Configuration: PCB Mount; "28-SOIC (0.295"", 7.50mm Width)"
- AC Input: 3 to 6
- Motor / System: Bipolar
- DC Input: 3 to 6
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 20
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Bipolar Motor Driver HVCMOS SPI 28-QFN (5x5) [See More]
- Configuration: PCB Mount; 28-VFQFN Exposed Pad
- AC Input: 3 to 6
- Motor / System: Bipolar
- DC Input: 3 to 6
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 20
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
STEPPER MOTOR PREDRIVER IC, SPI, [See More]
- Configuration: PCB Mount; 32-VQFN Exposed Pad
- AC Input: 7 to 36
- Motor / System: Bipolar
- DC Input: 7 to 36
from Infineon Technologies AG
The MOTIX ™ BTN7030-1EPA is a protected half-bridge with integrated driver. The MOTIX ™ single half-bridge ICs (NovalithIC ™)Lite, MOTIX ™ BTN7030-1EPA, is a part of the MOTIX ™ single half-bridge ICs(NovalithIC ™) family and it is a protected half-bridge with... [See More]
- Configuration: PCB Mount
- DC Input: 4 to 28
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Bipolar Motor Driver Power MOSFET SPI, Step/Direction 32-QFN (5x5) [See More]
- Configuration: PCB Mount; 32-VFQFN Exposed Pad
- AC Input: 3 to 5
- Motor / System: Bipolar
- DC Input: 3 to 5
from Infineon Technologies AG
The MOTIX ™ BTN8962TA is an integrated high current half bridge for motor drive applications. It is part of the MOTIX ™ single half-bridge ICs (NovalithIC ™) family containing one p-channel highside MOSFET and one n-channel lowside MOSFET with an integrated driver IC in one... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 40
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Bipolar Motor Driver CMOS SPI 16-SSOP [See More]
- Configuration: PCB Mount; "16-SSOP (0.154"", 3.90mm Width)"
- AC Input: 3 to 5
- Motor / System: Bipolar
- DC Input: 3 to 5
from Infineon Technologies AG
The MOTIX ™ BTN8982TA is an integrated high current half bridge for motor drive applications. It is part of the MOTIX ™ single half-bridge ICs(NovalithIC ™) family containing one p-channel highside MOSFET and one n-channel lowside MOSFET with an integrated driver IC in one package. [See More]
- Configuration: PCB Mount
- DC Input: 6 to 40
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Bipolar Motor Driver CMOS SPI 24-SOP [See More]
- Configuration: PCB Mount; "24-SOIC (0.295"", 7.50mm Width)"
- AC Input: 3 to 5
- Motor / System: Bipolar
- DC Input: 3 to 5
from Infineon Technologies AG
The MOTIX ™ BTN9960LV is an integrated high current half bridge with low path resistance for motor drive applications. The MOTIX ™ BTN9960LV is part of the MOTIX ™ (NovalithIC ™) family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET with an... [See More]
- Configuration: PCB Mount
- DC Input: 4 to 40
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
IC MOTOR DRIVER 3.3V/5V 40QFN [See More]
- Configuration: PCB Mount; 40-VFQFN Exposed Pad
- DC Input: 3 to 5
- AC Input: 3 to 5
- Communication: SPI, Step/Direction
from Infineon Technologies AG
The MOTIX ™ IFX007T is an integrated high current half bridge for motor drive applications. It is part of the Industrial & Multi Purpose MOTIX ™ single half-bridge ICs(NovalithIC ™) family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET with an... [See More]
- Configuration: PCB Mount
- DC Input: 6 to 40
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
from DigiKey
Bipolar Motor Driver SPI, Step/Direction 144-FBGA (13x13) [See More]
- Configuration: PCB Mount; 144-LBGA
- AC Input: 2 to 3
- Motor / System: Bipolar; Piezo
- DC Input: 2 to 3
from Infineon Technologies AG
The MOTIX ™ TLE4205 is an integrated power full-bridge DC-motor driver for a wide temperature range, as required in automotive applications for example. The circuit contains two power comparators that can be combined to a full-bridge circuit. For inductive loads there are integrated... [See More]
- Configuration: PCB Mount
- Peak Current: 1
- Motor / System: DC Servo; Bipolar
- Operating Temperature: -40 to 150
from DigiKey
Multiphase Motor Driver Power MOSFET SPI 76-QFN (10.5x6.5) [See More]
- Configuration: PCB Mount; 76-VFQFN Exposed Pad
- AC Input: 3 to 3
- Motor / System: DC Brushless
- DC Input: 3 to 3
from Infineon Technologies AG
The part is built using the bipolar high voltage power technology DOPL. The standard enhanced power PG-DSO-14 package meets the application requirements and saves PCBboard space and costs. The package is lead- and halogen-free. The servo-loop-parameter pos.- and neg. Hysteresis, pos.- and neg. [See More]
- Configuration: PCB Mount
- DC Input: 8 to 18
- Motor / System: DC Servo
- Peak Current: 1
from DigiKey
Motor Driver Power MOSFET PWM 52-QFN (8x8) [See More]
- Configuration: PCB Mount; 52-VFQFN Exposed Pad
- AC Input: 3 to 5
- Motor / System: DC Brushless
- DC Input: 3 to 5
from Infineon Technologies AG
MOTIX ™ TLE4729G is a bipolar, monolithic IC for driving bipolar stepper motors, DC motors and other inductive loads that operate by constant current. It is fully pin and function compatible except the current programming is inverse to the MOTIX ™ TLE4728G with an additional inhibit... [See More]
- Configuration: PCB Mount
- Peak Current: 1
- Motor / System: DC Servo; Bipolar
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Power MOSFET Parallel 16-DIP [See More]
- Configuration: PCB Mount; "16-DIP (0.300"", 7.62mm)"
- AC Input: 2 to 8
- Motor / System: DC Servo
- DC Input: 2 to 8
from Infineon Technologies AG
The MOTIX ™ TLE 8444SL is a protected Quad-Half-Bridge-IC targeted towards automotive and industrial motion control applications. It is a monolithic die based on Infineon ’s smart mixed technology SPT which combines bipolar and CMOS control circuitry with DMOS power devices. DC-Motors... [See More]
- Configuration: PCB Mount
- DC Input: 8 to 18
- Motor / System: DC Servo
- Peak Current: 0.8000
from DigiKey
Motor Driver Power MOSFET Parallel 16-DMP [See More]
- Configuration: PCB Mount; "16-SOIC (0.209"", 5.30mm Width)"
- AC Input: 2 to 8
- Motor / System: DC Servo
- DC Input: 2 to 8
from DigiKey
Motor Driver Bipolar Parallel 16-DMP [See More]
- Configuration: PCB Mount; "16-SOIC (0.209"", 5.30mm Width)"
- AC Input: 4 to 18
- Motor / System: DC Brushless
- DC Input: 4 to 18
from DigiKey
Bipolar Motor Driver Parallel 22-DIP [See More]
- Configuration: PCB Mount; "22-DIP (0.400"", 10.16mm)"
- AC Input: 5 to 5
- Motor / System: Bipolar
- DC Input: 5 to 5
from DigiKey
Bipolar Motor Driver Parallel 28-PLCC (11.51x11.51) [See More]
- Configuration: PCB Mount; 28-LCC (J-Lead)
- AC Input: 5 to 5
- Motor / System: Bipolar
- DC Input: 5 to 5
from DigiKey
160V 3-PHASE INTEGRATED MOTOR DR [See More]
- Configuration: PCB Mount; 57-WFQFN Exposed Pad
- AC Input: 25 to 160
- Motor / System: DC Brushless
- DC Input: 25 to 160
from DigiKey
EMBEDDED MOTOR CONTROLLER [See More]
- Configuration: PCB Mount; 40-VFQFN Exposed Pad
- AC Input: 8 to 18
- Motor / System: DC Brushless
- DC Input: 8 to 18
from Power Amp Design
The PAD131 fan controller module works with all power op amps offered by Power Amp Design and may be added to the application circuit at any time. The module was designed to extend fan life and reduce audible fan noise for those power amplifier applications where maximum cooling is not required. The... [See More]
- Configuration: PCB Mount
- DC Input: 5
- Axes: 1.0
- Phase : Single Phase
from Data Device Corporation (DDC)
The PW-8256XNX series is a high performance family of flexible, turnkey motor controllers designed to precisely control torque, speed, and position of 3-phase BLDC motors, for applications subjected to demanding environments. [See More]
- Configuration: PCB Mount
- Phase : Three Phase
- Product: Speed Controller
- Voltage: 100
from Performance Motion Devices
Atlas ® Digital Amplifiers are compact single-axis amplifiers that provide high-performance torque control for Brushless DC, DC Brush, and Step motors. They are packaged in a compact, solderable module and are ideal for use in positioning motion control, velocity control, and precision force... [See More]
- Configuration: PCB Mount
- DC Input: 12 to 56
- Axes: 1.0
- Continuous Current: 1.5 to 14
from Data Device Corporation (DDC)
The PW-87 series is a modular and scalable DSP-based, full featured motor controller that offers multi-interface position, torque, and speed control, and is designed for demanding high reliability industrial, military, and aerospace applications. Benefits. Fully Integrated, Plug & Play Bus... [See More]
- Configuration: PCB Mount
- Voltage: 600 to 1200
- Product: Speed Controller
- Continuous Current: 75
from Performance Motion Devices
The Juno ® Family of ICs provides advanced velocity and torque control for brushless DC, DC brush, and step motors. Available as a single, one-axis IC, Juno ICs provide full four-quadrant motion control, direct quadrature encoder input, profile generation, field-oriented control (FOC), and much... [See More]
- Configuration: PCB Mount
- Setup: Computer
- DC Input: 12 to 56
- Communication: CANbus; RS232; RS485
from Performance Motion Devices
The Magellan ® MC58000 Motion Control IC provides high- performance motion control for medical, scientific, robotics, and automation applications. Available in 1, 2, 3, and 4-axis versions, the MC58000 is a two-IC chipset that provides position and velocity control for Brushless DC, step, and DC... [See More]
- Configuration: PCB Mount
- Resolution: 16
- Product: Multi-Axis
- Axes: 1.0 to 4.0
from Performance Motion Devices
The Magellan ® MC55000 Motion Control IC provides high- performance motion control for medical, scientific, robotics, and automation applications. Available in 1, 2, 3, and 4-axis versions, this flexible and powerful chipset provides profile generation, direct quadrature encoder input, and pulse... [See More]
- Configuration: PCB Mount
- Resolution: 16
- Product: Multi-Axis
- Axes: 1.0 to 4.0
from Performance Motion Devices
Our Magellan ® MC58113 Motion Control IC provides high-performance motion control with an integrated digital current loop for medical, scientific, robotics, and automation applications. Available as a single, one-axis IC, the MC58113 IC is a programmable device that provides positioning,... [See More]
- Configuration: PCB Mount
- Axes: 1.0
- Resolution: 16
- DC Input: 12 to 56