DC Brushed Motor Motor Controllers
from PI (Physik Instrumente) L.P.
The A-82x motion controller series from PI offers a fully integrated electronics solution with controller, drives, and power supplies in a compact 4-U-high 19-inch rack unit. The A-82x controllers are designed and optimized for PIglide air bearing stages that are equipped with direct drive linear... [See More]
- Motor / System: DC Brushed; DC Brushless; Voice Coil; Voice Coil Drives, DC Motors, and Brushless 3-phase Motors
- Axes: 4.0 to 8.0
- Product: Multi-Axis
- AC Input: 200 to 240
from DigiKey
Multiphase Motor Driver Power MOSFET SPI 32-QFN (5x5) [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 40
- AC Input: 6 to 40
- Continuous Current: 1
from Infineon Technologies AG
The device is designed for various motor control automotive applications. To support these applications, the device provides the main functions, such as a 5 V lowdropout voltage regulator one HS-CAN transceiver supporting CAN FD, CAN Partial Networking (incl. FD Tolerant Mode), one LIN transceiver,... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
- DC Input: 6 to 28
from DigiKey
Motor Driver Parallel 14-PDIP [See More]
- Motor / System: DC Brushed
- DC Input: 8 to 16
- AC Input: 8 to 16
- Configuration: PCB Mount; "14-DIP (0.300"", 7.62mm)"
from Infineon Technologies AG
The MOTIX ™ Full Bridge IC provides a cost optimized solution for easy design in. The supply voltage of the device is at 7 V to 18 V. It suits automotive applications with limitation of minimum 10A and covers PWM frequency of up to 20 kHz. BTM9010EP stands out due to its small (4,9 x 6,0mm)... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
- DC Input: 4 to 40
from DigiKey
Motor Driver Parallel 18-PDIP [See More]
- Motor / System: DC Brushed
- DC Input: 2 to 20
- AC Input: 2 to 20
- Configuration: PCB Mount; "18-DIP (0.300"", 7.62mm)"
from Infineon Technologies AG
The MOTIX ™ IFX9201SG a general purpose 6A H-bridge for industrial applications, home appliance and building automation, power tools battery management and medical applications, designed for the control of small DC motors and inductive loads is available from Infineon now. The outputs can be... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 5 to 36
- Operating Temperature: -40 to 125
from DigiKey
Motor Driver Parallel 20-PDIP [See More]
- Motor / System: DC Brushed
- DC Input: 10 to 36
- AC Input: 10 to 36
- Configuration: PCB Mount; "20-DIP (0.300"", 7.62mm)"
from Infineon Technologies AG
The MOTIX ™ TLE 7209-2R H-Bridge is protected against over-temperature and short circuits and has an under voltage lockout for all the supply voltages “VS ” (main DC power supply). All malfunctions cause the output stages to go tristate. The device is configurable by the DMS pin. [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 5 to 28
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Parallel 20-PLCC (9x9) [See More]
- Motor / System: DC Brushed
- DC Input: 10 to 36
- AC Input: 10 to 36
- Configuration: PCB Mount; 20-LCC (J-Lead)
from Infineon Technologies AG
The MOTIX ™ TLE4207G is a protected Dual-Half-Bridge-Driver designed specially for automotive and industrial motion control applications. The part is built using the Infineon bipolar high voltage power technology DOPL. The actuator (DC motor) can be connected direct between the halfbridges. [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 8 to 18
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Parallel 8-SOIC [See More]
- Motor / System: DC Brushed
- DC Input: 4 to 28
- AC Input: 4 to 28
- Configuration: PCB Mount; "8-SOIC (0.154"", 3.90mm Width)"
from Infineon Technologies AG
MOTIX ™ TLE9166EQ multi half-bridge IC is perfectly suited for door lock, safe lock, mirror fold and adjustment functionalities, offering precise and accurate motor control for optimized performance. MOTIX ™ TLE9166EQ offers a compact solution with small package and inrush current (IC)... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
- DC Input: 6 to 20
from DigiKey
Motor Driver Parallel 20-SOIC [See More]
- Motor / System: DC Brushed
- DC Input: 2 to 20
- AC Input: 2 to 20
- Configuration: PCB Mount; "20-SOIC (0.295"", 7.50mm Width)"
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI. The half bridge drivers are designed to drive DC motor loads in sequential operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are controlled via... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 20
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Power MOSFET PWM 16-TSSOP [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 16
- AC Input: 6 to 16
- Configuration: PCB Mount; "16-TSSOP (0.173"", 4.40mm Width)"
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 20
- Operating Temperature: -40 to 150
from DigiKey
Bipolar Motor Driver SPI, Step/Direction 38-HTSSOP [See More]
- Motor / System: DC Brushed; Bipolar
- DC Input: 8 to 52
- AC Input: 8 to 52
- Configuration: PCB Mount; "38-PowerTFSOP (0.173"", 4.40mm Width)"
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential operation. Operation modes forward (cw), reverse (ccw), brake and high impedance are... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 20
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Parallel 24-SOIC [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 4 to 6
- AC Input: 4 to 6
- Configuration: PCB Mount; "24-SOIC (0.295"", 7.50mm Width)"
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 20
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Power MOSFET Parallel 24-VQFN (4x4) [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 45
- AC Input: 6 to 45
- Voltage: 5.9 to 45
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 20
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Parallel 28-DIP [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 4 to 6
- AC Input: 4 to 6
- Configuration: PCB Mount; "28-DIP (0.600"", 15.24mm)"
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 20
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Parallel 28-PDIP [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 4 to 6
- AC Input: 4 to 6
- Configuration: PCB Mount; "28-DIP (0.600"", 15.24mm)"
from Infineon Technologies AG
It is part of a larger family offering half-bridge drivers from three outputs to twelve outputs with direct interface or SPI interface. The half bridge drivers are designed to drive DC motor loads in sequential or parallel operation. Operation modes forward (cw), reverse (ccw), brake and high... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 20
- Operating Temperature: -40 to 150
from DigiKey
105V MAX SINGLE HALF-BRIDGE SMAR [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 8 to 20
- AC Input: 8 to 20
- Voltage: 8 to 20
from Infineon Technologies AG
The MOTIX ™ BTN7030-1EPA is a protected half-bridge with integrated driver. The MOTIX ™ single half-bridge ICs (NovalithIC ™)Lite, MOTIX ™ BTN7030-1EPA, is a part of the MOTIX ™ single half-bridge ICs(NovalithIC ™) family and it is a protected half-bridge with... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 4 to 28
- Operating Temperature: -40 to 150
from DigiKey
IC MOTOR DRIVER [See More]
- Motor / System: DC Brushed; Bipolar
- DC Input: 5 to 37
- AC Input: 5 to 37
- Continuous Current: 0.0150
from Infineon Technologies AG
The MOTIX ™ BTN8962TA is an integrated high current half bridge for motor drive applications. It is part of the MOTIX ™ single half-bridge ICs (NovalithIC ™) family containing one p-channel highside MOSFET and one n-channel lowside MOSFET with an integrated driver IC in one... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 40
- Operating Temperature: -40 to 150
from DigiKey
PROTOTYPE [See More]
- Motor / System: DC Brushed; Bipolar
- DC Input: 8 to 45
- AC Input: 8 to 45
- Voltage: 8.2 to 45
from Infineon Technologies AG
The MOTIX ™ BTN8982TA is an integrated high current half bridge for motor drive applications. It is part of the MOTIX ™ single half-bridge ICs(NovalithIC ™) family containing one p-channel highside MOSFET and one n-channel lowside MOSFET with an integrated driver IC in one package. [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 40
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Power MOSFET Parallel [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 6 to 45
- AC Input: 6 to 45
- Communication: Parallel Interface
from Infineon Technologies AG
The MOTIX ™ BTN9960LV is an integrated high current half bridge with low path resistance for motor drive applications. The MOTIX ™ BTN9960LV is part of the MOTIX ™ (NovalithIC ™) family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET with an... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 4 to 40
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Power MOSFET Parallel PG-VQFN-48-72 [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 6 to 28
- AC Input: 6 to 28
- Configuration: PCB Mount; 48-VQFN Exposed Pad
from Infineon Technologies AG
The MOTIX ™ IFX007T is an integrated high current half bridge for motor drive applications. It is part of the Industrial & Multi Purpose MOTIX ™ single half-bridge ICs(NovalithIC ™) family containing one p-channel high-side MOSFET and one n-channel low-side MOSFET with an... [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount
- DC Input: 6 to 40
- Operating Temperature: -40 to 150
from DigiKey
Motor Driver Power MOSFET Parallel PG-LQFP-64-17 [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 6 to 28
- AC Input: 6 to 28
- Configuration: PCB Mount; 64-LQFP Exposed Pad
from DigiKey
IC MOTOR DRIVER 4.75V-5.25V [See More]
- Motor / System: DC Brushed
- DC Input: 5 to 5
- AC Input: 5 to 5
- Voltage: 5 to 28
from DigiKey
Motor Driver CMOS SPI 32-LQFP (7x7) [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 28
- AC Input: 6 to 28
- Configuration: PCB Mount; 32-LQFP
from DigiKey
Motor Driver Power MOSFET Serial 20-SO [See More]
- Motor / System: DC Brushed
- DC Input: 8 to 28
- AC Input: 8 to 28
- Configuration: PCB Mount; "20-SOIC (0.295"", 7.50mm Width)"
from DigiKey
OCTAL HALF-BRIDGE PRE-DRIVER [See More]
- Motor / System: DC Brushed; Bipolar
- DC Input: 6 to 28
- AC Input: 6 to 28
- Continuous Current: 0.1200
from DigiKey
Bipolar Motor Driver CMOS Parallel 40-PDIP [See More]
- Motor / System: DC Brushed; DC Brushless; Bipolar
- DC Input: 5 to 5
- AC Input: 5 to 5
- Configuration: PCB Mount; "40-DIP (0.600"", 15.24mm)"
from DigiKey
MAGELLAN DCB CTRL IC 1-AXIS v1.2 [See More]
- Motor / System: DC Brushed; Voice Coil
- DC Input: 3 to 4
- AC Input: 3 to 4
- Continuous Current: 0.0040
from Quarktwin Technology Ltd.
Bipolar Motor Driver PWM 8-DIP [See More]
- Motor / System: DC Brushed; Brushed DC
- Communication: PWM
from Aerotech, Inc.
Design Features. Up to six integrated drives in one stand-alone controller. Additional external drive axes can be added to provide up to nine axes of coordinated motion. Controller architecture capable of coordinating motion of up to five independent tasks. Capable of driving and controlling linear... [See More]
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Linear
- Axes: 6.0 to 9.0
- Product: Controller / Drive; Multi-Axis; Pulse Width Modulation Drive; DSP
- AC Input: 110 to 230
from Critical Velocity Enterprises, LLC
The BIDIR-309 is a fully solid-state motor controller that allows you to control the speed and direction of a brushed DC motor using a potentiometer or a 0-5V voltage level. Logic DIR and BRAKE inputs control motor direction and braking. Automatic current limiting protects the controller and motor... [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 26
- Product: Speed Controller
- Power: 230
from Performance Motion Devices
A programmable version of the standard ION ® 500 Digital Drive, the ION/CME 500 allows designers to download and run motion programs directly onto the ION 500 Digital Drive itself. This feature off-loads the host and allows for greater design flexibility with the distribution of motion programs... [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 12 to 56
- Axes: 1.0
- Continuous Current: 9.8
from Quarktwin Technology Ltd.
Bipolar Motor Driver Bipolar Parallel 24-DIP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Microstepping Motor; Linear
- Axes: 1.0
- Product: Controller / Drive; Pulse Width Modulation Drive; DSP
- DC Input: 10 to 80
from Critical Velocity Enterprises, LLC
Control the speed and direction of a DC motor using any 1k to 30k potentiometer. This PWM motor controller runs cool while handling up to 15 amps of continuous current. Features: Use any 1k to 30k pot for control Digital input filtering allows smooth control even with dirty pots Logic Controller... [See More]
- Motor / System: DC Brushed
- DC Input: 10 to 26
- Product: Speed Controller
- Power: 390
from Performance Motion Devices
ION ® 500 & ION 3000 Digital Drives are compact, fully enclosed modules that provide high-performance motion control, network connectivity and power amplification for Brushless DC, DC Brush, and step motors. Two power output levels are available, the ION 500 is rated at 500 Watts and the ION... [See More]
- Motor / System: DC Brushed; DC Brushless
- DC Input: 20 to 195
- Axes: 1.0
- Continuous Current: 9.8
from Quarktwin Technology Ltd.
Bipolar Motor Driver Bipolar Parallel 24-SOIC [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Aerotech, Inc.
Design Features. Networkable with any Ensemble drive to control up to ten axes of piezo and/or servomotor stages. Multi-axis Position Synchronized Output (PSO) for real-time triggering of events. High-precision 20-bit sensor resolution for capacitive sensor feedback. Thermally-stable feedback... [See More]
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Piezo or Servomotor Stages
- Resolution: 20
- Product: Controller / Drive; Multi-Axis
- Axes: 10.0
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k to 30k potentiometer, 0-5V signal, push buttons or logic pulses from a microcontroller. This controller features a silent PWM switching frequency for use in noise-sensitive applications. It can also be used as a low voltage light dimmer for halogen lamps,... [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 36
- Product: Speed Controller
- Power: 540
from Quarktwin Technology Ltd.
Bipolar Motor Driver Power MOSFET Parallel 10-TDFN (3x3) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Aerotech, Inc.
Design Features. High-power 6U modular drive chassis. 19 inch rack-mount design. Flexible design provides the ability to drive brush, brushless or stepper motors with the same amplifier. 5 A to 30 A peak output current. PWM or linear amplifiers. Integral power supplies. IEEE-1394 FireWire ®... [See More]
- Motor / System: DC Brushed; DC Brushless; Permanent Magnet
- Axes: 1.0 to 6.0
- Resolution: 16
- AC Input: 100 to 240
from Critical Velocity Enterprises, LLC
This Analog / Digital PWM Controller gives you the most flexibility for your application. Give your project a high-tech feel with push button speed control. It can also be used as a low voltage light dimmer for halogen lamps, or for controlling heaters and irons. 4 Ways to Control: Analog: Use any... [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 36
- Product: Speed Controller
- Power: 540
from Quarktwin Technology Ltd.
Motor Driver Power MOSFET Parallel 8-DFN/MLP (2x2) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: Parallel
from Aerotech, Inc.
Design Features. 3U plug-in drives. 19 inch rack-mount design. Flexible design provides the ability to drive brush, brushless, or stepper motors with the same amplifier. 5 A to 30 A peak output current. PWM or linear amplifier. Integral power supplies. IEEE-1394 FireWire interface. Digital current,... [See More]
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Linear
- Axes: 1.0 to 6.0
- Product: Controller / Drive; Multi-Axis; Pulse Width Modulation Drive; DSP
- DC Input: 10 to 320
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k, 5k, 10k or 25k potentiometer, 0-5V signal, push buttons or logic pulses from a microcontroller. This controller features a silent PWM switching frequency for use in noise-sensitive applications. It can also be used as a low voltage light dimmer for... [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 30
- Product: Speed Controller
- Power: 840
from Quarktwin Technology Ltd.
Bipolar Motor Driver DMOS Parallel 20-QFN-EP (4x4) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Aerotech, Inc.
Design Features. 3U, 19-inch rack-mount design with integral drives. Flexible design provides the ability to drive brush, brushless, or stepper motors with the same amplifier. 5 A continuous, 10 amp peak output current. PWM or linear amplifiers. Integral power supplies. IEEE-1394 FireWire interface. [See More]
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Linear
- Resolution: 12
- Product: Controller / Drive; Multi-Axis
- Axes: 4.0 to 8.0
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k to 30k potentiometer. This PWM motor controller runs cool while handling up to 10 amps of continuous current. It can also be used as a low voltage light dimmer for halogen lamps, or for controlling heaters and irons. Features: Use any 1k to 30k pot for... [See More]
- Motor / System: DC Brushed
- DC Input: 6 to 58
- Product: Speed Controller
- Power: 580
from Quarktwin Technology Ltd.
Bipolar Motor Driver DMOS Parallel 16-QFN/MLP (3x3) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: Parallel
from Aerotech, Inc.
Design Features. Single-axis digital servo controller with integral power supply and amplifier. Advanced software architecture shortens customer development time; use C#, VB.Net, C, and LabVIEW?? combined with our full IDE and multitasking operating system. Host-mode operation allows you to send... [See More]
- Motor / System: DC Brushed; DC Brushless; DC Servo; AC Servo; Permanent Magnet; Hybrid; Microstepping Motor; Linear
- Axes: 1.0
- Product: Controller / Drive; Pulse Width Modulation Drive; DSP
- DC Input: 10 to 80
from Quarktwin Technology Ltd.
Motor Driver Power MOSFET PWM 28-TSSOP-EP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: PWM
from Quarktwin Technology Ltd.
Motor Driver NMOS SPI 38-eTSSOP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: SPI
from Quarktwin Technology Ltd.
Motor Driver Power MOSFET Parallel 28-SOIC [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 135
- Communication: Parallel
from Quarktwin Technology Ltd.
Motor Driver NMOS SPI, Parallel 38-TSSOP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 125
- Communication: SPI, Parallel
from Quarktwin Technology Ltd.
Motor Driver DMOS Parallel 16-SOIC [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Quarktwin Technology Ltd.
Motor Driver DMOS Parallel 16-eTSSOP-EP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Quarktwin Technology Ltd.
Bipolar Motor Driver Bipolar Parallel 16-DIP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Quarktwin Technology Ltd.
Motor Driver Bipolar Parallel 16-DIP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Parallel
from Quarktwin Technology Ltd.
Motor Driver DMOS Serial 44-PLCC (16.59x16.59) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Serial
from Quarktwin Technology Ltd.
Bipolar Motor Driver DMOS Parallel 36-QFN (6x6) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 85
- Communication: Parallel
from Quarktwin Technology Ltd.
Bipolar Motor Driver DMOS Parallel 48-LQFP-EP (7x7) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 85
- Communication: Parallel
from Quarktwin Technology Ltd.
Bipolar Motor Driver DMOS Serial 32-QFN (5x5) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 150
- Communication: Serial
from Quarktwin Technology Ltd.
Motor Driver Power MOSFET On/Off 24-TSSOP-EP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: On/Off
from Quarktwin Technology Ltd.
Motor Driver DMOS Analog 8-SOIC-EP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: Analog
from Quarktwin Technology Ltd.
Motor Driver DMOS Parallel 10-MSOP-EP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: Parallel
from Quarktwin Technology Ltd.
Motor Driver NMOS Parallel 20-TSSOP-EP [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 105
- Communication: Parallel
from Quarktwin Technology Ltd.
Motor Driver Power MOSFET Parallel 24-QFN (4x4) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -20 to 85
- Communication: Parallel
from Quarktwin Technology Ltd.
Motor Driver Power MOSFET PWM 16-QFN-EP (4x4) [See More]
- Motor / System: DC Brushed; Brushed DC
- Operating Temperature: -40 to 150
- Communication: PWM