Reactive / Moisture Cured Architectural Coatings
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin; Aliphatic
from PPG TrueFinish
Excellent color and gloss retention, anti marring [See More]
- Cure / Setting Technology: Reactive or Moisture Cured
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Paint; Enamel; Clear Coat
- Coating Material: Polyurethane; Resin; Solvent
from Wacker Chemical Corp.
ELASTOSIL ® E91 is a self-levelling silicone rubber with very good mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It can also be cured in steam oven within 3 min. Properties. fast curing in steam oven. high elongation properties. acetic... [See More]
- Cure / Setting Technology: Reactive or Moisture Cured
- Substrate: Other; Textiles
- Type: Coating; Sealer
- Coating Material: Resin; Rubber; Silicone
from Owens Corning® FOAMGLAS® Insulation
A silicone-based, single-component coating, sealant and adhesive which cures by reaction with humidity. It is odorless, free of solvents, isocyanates and PVC. It provides good weathering, UV and mechanical resistance, as well as excellent chemical resistance, and is classified as a flame retardant... [See More]
- Cure / Setting Technology: Reactive or Moisture Cured
- Coating Material: Resin
- Type: Coating
- Operating Temperature: -58 to 248
from Sherwin-Williams Protective & Marine Coatings
Anti-Graffiti Coating is a clear, one-component, non-sacraficial, ready to use siloxane coating that cures with atmospheric moisture. Intended for use over properly prepared concrete surface. Excellent graffiti resistance. Excellent cleanability with either water power-washing, or solvent wipe. [See More]
- Cure / Setting Technology: Reactive or Moisture Cured
- Substrate: Concrete; Other; Previously Painted Surfaces
- Type: Coating
- Coating Material: Siloxane
from Owens Corning® FOAMGLAS® Insulation
A liquid applied moisture cure vapor retarder coating especially formulated for use with FOAMGLAS ® insulation. PITTCOTE ® 300E coating can be used as a protective/vapor retarder coating over FOAMGLAS ® insulation under metal jacket or other UV resistant finish or as vapor retarder... [See More]
- Cure / Setting Technology: Reactive or Moisture Cured
- Substrate: Asphalt (optional feature); Metallic (optional feature)
- Type: Coating
- Cure Temperature: 77
from Sherwin-Williams Protective & Marine Coatings
Corothane ® I ALIPHATIC FINISH COAT is a single component, VOC compliant, moisture curing urethane designed for low temperature or high humidity applications while providing UV resistance and chemical resistance equivalent to two part urethane coatings. Low temperature application - down to 20... [See More]
- Cure / Setting Technology: Reactive or Moisture Cured; Thermoset
- Substrate: Concrete; Metallic; Steel; Other; Iron
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin
from Sherwin-Williams Protective & Marine Coatings
Corothane ® I Ironox ® B is a single component, VOC compliant, moisture curing urethane intermediate coat with micaceous iron oxide designed for low temperature applications, providing chemical and abrasion resistance. Low temperature application - down to 20 °F. Outstanding adhesion... [See More]
- Cure / Setting Technology: Reactive or Moisture Cured; Thermoset
- Substrate: Concrete; Steel; Other; Iron
- Type: Coating; Primer (optional feature)
- Coating Material: Polyurethane; Resin; Micaceous Iron Oxide