Aluminum Architectural Coatings
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Substrate: Aluminum
- Cure / Setting Technology: Can Be Cured At Room or High Temperatures
- Type: Coating
- Coating Material: Fluoropolymers; Resin
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint; Clear Coat
- Coating Material: Alkyd; Polyurethane; Resin; Solvent
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Substrate: Aluminum; Concrete; Metallic; Plastic; Steel; Wood; Other; Fiberglass
- Cure / Setting Technology: Film Drying
- Type: Paint; Clear Coat
- Coating Material: Epoxy; Resin
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Cure Temperature: 400
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Polyurethane; Resin; Polyester
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Polyurethane; Resin
from FORREST Technical Coatings
We carry standard stock and RAL colors, but specialize in working with customers to create decorative and unique appearances for their specific needs. Our product catalog includes metallic, veins, textures and crinkle effects. We do expedient color matches and provide various other effects with... [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Epoxy; Resin
from FORREST Technical Coatings
FORREST Polyurethanes are designed to be long-lasting, highly-durable finishes with great color and gloss retention and excellent abrasion resistance. For use over multiple substrates in interior and exterior applications. 800 Series products comply with current environmental regulations in the... [See More]
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint; Clear Coat
- Coating Material: Alkyd; Polyurethane; Resin; Solvent
from FORREST Technical Coatings
A high-performance, high-gloss, two-component acrylic polyurethane enamel with excellent gloss retention, exterior durability and fast-dry characteristics. [See More]
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint; Clear Coat
- Coating Material: Alkyd; Polyurethane; Resin; Solvent
from FORREST Technical Coatings
A single-component, high-performance, high-gloss acrylic polysiloxane finish coat. Provides a polyurethane-like finish with outstanding weatherability, gloss and color retention. Isocyanate-free formulation makes it safer to use than conventional two-component polyurethanes. Less than 1.0 lbs/gallon... [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Other; Fiberglass
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Polyurethane; Resin; Solvent
from FORREST Technical Coatings
A high-solids, high-gloss acrylic aliphatic polyurethane finish formulated with the highest quality polyurethane resins and pigments. Provides outstanding performance in the most severe climates with excellent abrasion and chemical resistance. Less than 2.8 lbs/gallon VOCs. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Other; Fiberglass
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Polyurethane; Resin; Solvent
from FORREST Technical Coatings
A high-solids, polyester polyurethane finish formulated with the highest-quality resin. Chemically engineered to provide outstanding performance in the most severe climates while retaining original gloss and color for many years. Combines outstanding durability with exceptional quality and color... [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Other; Fiberglass
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Polyurethane; Resin; Solvent
from FORREST Technical Coatings
Polyester Epoxy hybrid powder coatings are designed for good electrostatic properties and surface flow over a wide range of film thickness. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Epoxy; Resin
from FORREST Technical Coatings
Stove Bright High Temperature Paint is a liquid coating sprayed on properly prepared metal substrate for a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Backed by decades of proven performance, these coatings are the industry standard for heat resistance in... [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
- Cure / Setting Technology: Film Drying; Thermoplastic
- Type: Coating; Paint
- Coating Material: Resin; Silicone; Solvent
from Protavic America, Inc.
PTV 28997. The PROTAVIC ® C 3513 S is a pure silver-filled electro-conductive ink which is supplied as a single substrates, and is specially adapted for silk screen printing. Its characteristic features are: fineness, good electrical conductivity and good adhesion on all substarates, especially... [See More]
- Substrate: Aluminum; Anodized; Asphalt; Ceramic; Concrete; Glass; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Ink
- Coating Material: Metal Filled; Resin; Silver
from Sherwin-Williams Protective & Marine Coatings
Acrolon ™ 218 HS acrylic polyurethane is a low VOC, polyester modified, aliphatic, acrylic polyurethane formulated specifically for in-shop applications. Also suitable for industrial applications. A fast drying, urethane that provides color and gloss retention for exterior exposure. [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Coating Material: Acrylic; Polyurethane; Resin; Aliphatic
from Chase Products Co.
CS+ Lubricant is a 4-way lube that stops annoying squeaks, guards against rust and corrosion, releases rusted or frozen metal parts with instant penetration, and removes moisture. It will displace water and moisture-proof all types of electrical equipment, relay switches, wet engines, distributors,... [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Form: Aerosol
from Redwood Plastics
Wearlon Super F-4 is the hardest in the line of Wearlon coatings, improving abrasion resistance and prolonging the life of your propeller. It is a water based, environmentally friendly coating that can be painted or sprayed on. Wearlon Super F-4 is a non-stick foul release coating that minimizes... [See More]
- Substrate: Aluminum
- Cure / Setting Technology: Film Drying
- Type: Coating; Non-Stick Foul Release
- Coating Material: Water
from Columbia Chemical Corporation
MARQUEE ® ENVY MP is an ELV compliant, mid phosphorous, electroless nickel plating process. It contains no lead nor cadmium, and meets ASTM-B-733 and AMS2404 C specifications. Being a two component process, it is easy to use and has a 1:1 replenishment rate. It provides a deep, brilliant... [See More]
- Substrate: Aluminum; Steel; Other; Brass
- Coating Material: Electroless Nickel Plating Solution
- Type: Coating; Electroless Nickel Deposit
- Form: Liquid
from Graphic Controls
Graphic Controls new line of solid inks for use in Markem ® printersare formulated with our customer needs in mind. Whether you have smallcharacter or large character ink jet printing systems, printing text,bar codes or graphics, Graphic Controls has a solution. . GraphicControls... [See More]
- Substrate: Aluminum; Glass; Plastic; Wood; Other
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Cure Temperature: 40 to 120
from Dampney Company, Inc.
Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides... [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating
- Coating Material: Rubber
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Sound Damping
- Coating Material: Resin; Rubber; Water
from Sanchem, Inc.
Enhances paint and coating adhesion specifically from filiform corrosion on aluminum castings such as (380, 383, 360, aluminum zinc die castings [See More]
- Substrate: Aluminum; Steel; Other; Magnesium
- Cure / Setting Technology: Film Drying
- Type: Sealer
- Coating Material: Chromate-Free
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel
- Cure / Setting Technology: Multicomponent
- Type: Coating; Enamel; Base Coat
- Coating Material: Acrylic; Polyurethane; Resin
from ADSIL Inc.
Effective barrier facilitates easy removal of most common forms of graffiti [See More]
- Substrate: Aluminum; Ceramic; Concrete; Metallic
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat; Sealer
- Coating Material: Inorganic (Silicate, Cement, Glaze); Inorganic Siloxane
from Valspar Corporation (The)
Priced to flow. Our Acrodize ® coating is a formula for success. A tough, hard, high-traffic warrior with a price that ’s easy on the budget. Developed for storefronts, fast food operations, schools, shopping malls and all manner of heavy-use public spaces. Looks great, wears incredibly... [See More]
- Substrate: Aluminum
- Coating Material: Fluoropolymers; Resin; 70% PVDF
- Type: Coating
- Features: Weather Resistant
from All-Spec Industries
The All-Spec CP100G-1 is a conductive formulation that has a water based coating manufactured with high quality acrylic latex and waterborne urethane. Produced to meet or exceed the ASTM-D-25780 specifications for conductivity and static decay rates. Use on floors, bench tops, tote boxes, etc. [See More]
- Substrate: Aluminum; Anodized; Ceramic; Concrete; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Paint; Base Coat
- Coating Material: Acrylic; Resin; Water
from Sherwin-Williams Protective & Marine Coatings
An alkyd primer formulated for use as a general primer for applications to steel and aluminum. This product complies with Military Specification TT-P-645C, Formula 84. Recommended Usage. For use on prepared steel and aluminum in marine and industrial environments: Marine Vessels - interior and... [See More]
- Substrate: Aluminum; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Primer
- Coating Material: Alkyd; Resin
from Columbia Chemical Corporation
COLGLEAM ® Sn is a process for bright acid tin plating. Baths are maintained with only one brightener additive, eliminating the need to juggle and balance brighteners. The COLGLEAM Sn process is extremely simple to control, requiring only a fraction of the lab and analysis time needed by... [See More]
- Substrate: Aluminum; Steel
- Coating Material: Acid Sulfate Tin Plating
- Type: Coating; Tin Plating
- Form: Liquid
from Dampney Company, Inc.
Selective Black, silicone-based paint which collects heat more efficiently than ordinary black paint and resists out gassing to 400F. It is designed to selectively absorb wavelengths with the greatest heat content when used on the metal surfaces of collector panels having glazed covers. It collects... [See More]
- Substrate: Aluminum; Metallic; Steel; Other; Stainless Steel
- Cure / Setting Technology: Film Drying; Thermoset (optional feature)
- Type: Coating; Paint
- Coating Material: Resin; Silicone
from Sanchem, Inc.
The Naval Air Development Center tested the 6 best chromate-free metal surface treatment to the Mil-C-5541 specification. Their conclusion was that SafeGard CC is the best non chromate conversion coating terms of paint adhesion and corrosion resistance [See More]
- Substrate: Aluminum; Steel; Other; Magnesium, Zinc
- Cure / Setting Technology: Film Drying
- Type: Coating; Primer; Conversion Coating
- Coating Material: Inorganic (Silicate, Cement, Glaze); Conversion; Chromate-Free
from Rust-Oleum Corporation
15 oz Aerosol; Safety Blue; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
Corothane ® II is a 2-component, VOC compliant, aliphatic acrylic modified polyurethane designed for use in industrial environments. A chemical and abrasion resistant urethane enamel. A heavy duty maintenance coating for use in "high visibility areas. RECOMMENDED USAGE. Use over prepared... [See More]
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Enamel
- Coating Material: Acrylic; Polyurethane; Resin; Aliphatic
from Rust-Oleum Corporation
15 oz Aerosol; Safety Yellow; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
DRY FALLOUT SPRAY EG-SHEL WHITE is a fast drying alkyd white paint for interior use. Overspray dries to a removable dust within eight feet @ 77 °F and 50% relative humidity. Eight foot dry fallout. 86% light reflectance. High hiding. Easy cleanup. Interior use. RECOMMENDED USAGE. For use over... [See More]
- Substrate: Aluminum; Concrete; Steel; Wood; Other; Galvanizing, Drywall, Iron
- Cure / Setting Technology: Film Drying
- Type: Paint
- Coating Material: Alkyd; Resin
from Rust-Oleum Corporation
15 oz, Aerosol Can; Red; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC COATING is a 100% acrylic, water reducible, corrosion resistant coating for light to moderate industrial use. Designed for new construction or maintenance use and can be used directly over prepared substrates. Chemical resistant. Corrosion resistant. Fast dry. Low odor. Flash rust/early... [See More]
- Substrate: Aluminum; Concrete; Steel; Wood; Other; Galvanizing, Drywall, Zinc Rich Primers
- Cure / Setting Technology: Film Drying
- Type: Coating
- Coating Material: Acrylic; Resin; Water
from Rust-Oleum Corporation
15 oz Aerosol; Flat Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
DTM ACRYLIC PRIMER/FINISH is a 100% acrylic emulsion, waterborne, corrosion resistant coating for both new construction and industrial maintenance applications. It can be used as a primer under most water based topcoats or alone as a primer/topcoat system. It can be used directly over multipe... [See More]
- Substrate: Aluminum; Concrete; Steel; Other; Zinc Rich Primers, Galvanizing
- Cure / Setting Technology: Multicomponent
- Type: Coating; Primer; Clear Coat
- Coating Material: Acrylic; Resin; Water
from Rust-Oleum Corporation
15 oz Aerosol; Gloss Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
Macropoxy ® 646-100 FAST CURE EPOXY is a high solids, less than 100 g/L VOC, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate... [See More]
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Thermoset
- Type: Coating
- Coating Material: Epoxy; Resin; Polyamide
from Rust-Oleum Corporation
15 oz Aerosol Can; Gray; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
Macropoxy ® 646-100 FAST CURE EPOXY is a high solids, less than 100 g/L VOC, high build, fast drying, polyamide epoxy designed to protect steel and concrete in industrial exposures. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate... [See More]
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
- Coating Material: Epoxy; Resin; Polyamide
- Type: Coating
- Cure Temperature: 40 to 100
from Rust-Oleum Corporation
15 oz Aerosol; Dark Machine Gray; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
Macropoxy ® HS HIGH SOLIDS EPOXY is a VOC compliant epoxy polyamide mastic designed for application to properly prepared steel surfaces. May be used as a one or two coat, direct-to-metal protective coating. Can be applied to marginally prepared surfaces. Long-term durability. Corrosion... [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Thermoset
- Type: Coating
- Coating Material: Epoxy; Resin; Polyamide Mastic
from Rust-Oleum Corporation
15 oz Aerosol; Gloss White; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
EPOXY MASTIC ALUMINUM II is a high solids, aluminum filled, polyamine bisphenol A epoxy coating formulated to provide a high performance system over marginally prepared steel surfaces. Outstanding adhesion over marginally prepared surfaces. Chemical and moisture barrier. As a barrier or universal... [See More]
- Substrate: Aluminum; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Thermoset
- Type: Coating; Primer; Clear Coat
- Coating Material: Aluminum; Epoxy; Metal Filled; Resin; Polyamine Bisphenol-A
from Rust-Oleum Corporation
12 oz Aerosol Can; Safety Blue; 12 min to Tack-free Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; Premium brand from Rustoleum; Multipurpose Paint [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
Fast Clad ® DTM URETHANE is a single coat, direct-to-metal urethane finish. It is a fast dry, polyaspartic urethane formulated to provide high build, high performance protection with excellent gloss and color retention through airless spray. Single coat application. Direct to metal. Corrosion... [See More]
- Substrate: Aluminum; Metallic; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating
- Coating Material: Polyurethane; Resin; Polyaspartic
from Rust-Oleum Corporation
12 oz, Aerosol Can; Gray Primer; Used with 1600 System Enamel Aerosol; Provides a solid base for adhesion of topcoat; Wet or dry Sandable; Use on wood, metal, masonry, etc.; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Sherwin-Williams Protective & Marine Coatings
Fast Clad ® HB Acrylic is a one component, fast dry, high build finish designed for one coat application directly to organic or inorganic zinc-rich primers or other recommended primers. May also be applied directly to prepared steel. High film build in one coat. Superior gloss and color... [See More]
- Substrate: Aluminum; Concrete; Steel; Wood; Other; Zinc Rich Primers, Drywall
- Cure / Setting Technology: Film Drying
- Type: Coating
- Coating Material: Acrylic; Resin
from Rust-Oleum Corporation
Low VOC, water based acrylic finish, indoor/outdoor use, gloss retention [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Paint; Enamel
- Coating Material: Acrylic; Resin; Water
from Sherwin-Williams Protective & Marine Coatings
Fast Clad ® URETHANE is a fast dry, single coat, polyaspartic urethane specifically formulated for accelerated maintenance painting. Fast drying minimizes dust and grit "pick-up". Allows entire maintenance coating systems to be completed in one shift. Single coat application. High film build in... [See More]
- Substrate: Aluminum; Concrete; Steel; Other; Iron, Galvanizing
- Cure / Setting Technology: Thermoset
- Type: Coating
- Coating Material: Polyurethane; Resin; Aliphatic
from Rust-Oleum Corporation
Two component, high solids, direct to metal, aliphatic acrylic polyurethane [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel
- Cure / Setting Technology: Multicomponent
- Type: Coating; Mastic
- Coating Material: Polyurethane; Resin