Wood Architectural Coatings
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Substrate: Aluminum; Concrete; Metallic; Plastic; Steel; Wood; Other; Fiberglass
- Cure / Setting Technology: Film Drying
- Type: Paint; Clear Coat
- Coating Material: Epoxy; Resin
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Cure Temperature: 400
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Polyurethane; Resin; Polyester
from FORREST Technical Coatings
FIRMmarker ® Road Marker Adhesive is a 2-part epoxy adhesive designed to affix traffic markers (RPMs), delineators, surface mount traffic indicators, and safety posts to concrete, but can also be used to bond concrete to a variety of other materials such as concrete, wood, or asphalt. FIRMmarker... [See More]
- Substrate: Asphalt; Concrete; Wood
- Coating Material: Epoxy Adhesive
- Type: Coating
- Form: Cartridge
from FORREST Technical Coatings
Powder coating is a versatile technology for use on multiple substrates and in multiple applications with the added benefit of low emissions. Available in both TGIC-free and low cure options, our product catalog includes metallic, veins, textures and crinkle effects. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Polyurethane; Resin
from FORREST Technical Coatings
We carry standard stock and RAL colors, but specialize in working with customers to create decorative and unique appearances for their specific needs. Our product catalog includes metallic, veins, textures and crinkle effects. We do expedient color matches and provide various other effects with... [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Epoxy; Resin
from FORREST Technical Coatings
A high-gloss alkyd enamel designed for brush and roll application on metal surfaces. Excellent for marking safety equipment, safety hazards and piping to comply with OSHA color standards. Multiple stocked bases allow for tinting on demand. [See More]
- Substrate: Metallic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Coating Material: Alkyd; Glass Enamel; Resin; Solvent
from FORREST Technical Coatings
Polyester Epoxy hybrid powder coatings are designed for good electrostatic properties and surface flow over a wide range of film thickness. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Epoxy; Resin
from FORREST Technical Coatings
Polyester Epoxy hybrid powder coatings are designed for good electrostatic properties and surface flow over a wide range of film thickness. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Epoxy; Resin; Polyester Epoxy Blend
from FORREST Technical Coatings
TGIC-free polyesters are used in applications where TGIC is not desired and offer the same advantages as the Polyester TGIC powders. [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Cure Temperature: 400
from FORREST Technical Coatings
Forrest is the distributor for TCI's TruRAL powder coatings in Oregon, Washington, Idaho and Montana. These Super Durable powders offer exceptional UV performance and robust application characteristics. Forrest provides these RAL standard colors in order minimums of 25 pounds, allowing us to focus... [See More]
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Paint
- Coating Material: Polyester
from Protavic America, Inc.
PTV 28997. The PROTAVIC ® C 3513 S is a pure silver-filled electro-conductive ink which is supplied as a single substrates, and is specially adapted for silk screen printing. Its characteristic features are: fineness, good electrical conductivity and good adhesion on all substarates, especially... [See More]
- Substrate: Aluminum; Anodized; Asphalt; Ceramic; Concrete; Glass; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Ink
- Coating Material: Metal Filled; Resin; Silver
from Dryvit UK
Interior/exterior acrylic PMR coating in standard and custom colours. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. [See More]
- Substrate: Concrete; Metallic; Wood; Other; Stucco and Acrylic-Based Textured Finishes
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Coating Material: Acrylic; Resin
from Epoxies Etc...
Deco-Coat 2501 Resin is a two component high gloss epoxy resin that forms a hard enamel like finish. This versatile coating is a liquid resin that is safe and easy to use. It does no contain any solvents or offensive odors. DC-2501R is also available in low viscosity (DC-2501R LV). [See More]
- Substrate: Concrete; Glass; Metallic; Plastic; Wood
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Clear Coat
- Coating Material: Epoxy; Resin
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Valspar Corporation (The)
Solid StainView stain colors. Total coverage gives maximum protection. VIEW PRODUCT DETAILS. Solid Color Acrylic Siding Stain. Solid Color Decking Stain. Semi-Solid StainView stain colors. Extra pigment adds longevity. VIEW PRODUCT DETAILS. Semi-Solid Siding and Fence. Semi-Solid Deck & Siding... [See More]
- Substrate: Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Substrate: Concrete; Steel; Wood
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Coating Material: Epoxy; Resin; Polyamide
from 3M Advanced Materials Division
Elastomer-based formula creates a tough, flexible, abrasion resistant coating. Resists heat, flame, and weathering for lasting, reliable performance. Resists gasoline, aircraft fuel, hydraulic oil and water. Can be applied by spraying, brushing or flow coating. 3M ™ Scotch-Weld ™... [See More]
- Substrate: Glass; Wood
- Form: Aerosol; Liquid
- Type: Coating
- Features: Abrasion, Erosion or Wear Resistant
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Type: Coating; Sound Damping
- Coating Material: Resin; Rubber; Water
from Graphic Controls
Graphic Controls new line of solid inks for use in Markem ® printersare formulated with our customer needs in mind. Whether you have smallcharacter or large character ink jet printing systems, printing text,bar codes or graphics, Graphic Controls has a solution. . GraphicControls... [See More]
- Substrate: Aluminum; Glass; Plastic; Wood; Other
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Cure Temperature: 40 to 120
from Rust-Oleum Corporation
Clear, fast drying, oil modified, single component waterborne polyurethane [See More]
- Substrate: Concrete; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin; Water
from Chase Products Co.
Silicone Mold Release Spray is a colorless, dry spray that reduces friction and buildup on molds without leaving an oily or greasy surface. Dries fast. Extends the life of equipment. Cuts cleanup time. This non-staining formula has a low surface tension and performs in temperatures from -47 °F... [See More]
- Substrate: Glass; Metallic; Wood; Other; Rubber
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Operating Temperature: -47 to 399
from Aervoe Industries Incorporated
Used for touch-up & installation of anodized & painted building components [See More]
- Substrate: Anodized; Concrete; Metallic; Wood
- Cure / Setting Technology: Film Drying
- Type: Paint
- Coating Material: Acrylic; Alkyd; Resin; Solvent
from All-Spec Industries
The All-Spec CP100G-1 is a conductive formulation that has a water based coating manufactured with high quality acrylic latex and waterborne urethane. Produced to meet or exceed the ASTM-D-25780 specifications for conductivity and static decay rates. Use on floors, bench tops, tote boxes, etc. [See More]
- Substrate: Aluminum; Anodized; Ceramic; Concrete; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Paint; Base Coat
- Coating Material: Acrylic; Resin; Water
from Epoxies Etc...
Deco-Coat 2570 Epoxy Resin is an ultra clear, high gloss, durable coating. This liquid polymer epoxy resin is formulated without solvents and is therefore safe and easy to use. It is formulated in a convenient 1:1 by volume mix ration. [See More]
- Substrate: Wood
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Clear Coat
- Coating Material: Epoxy; Resin
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®33 EPOXY PRIMER/SEALER is a low viscosity, 100% solids, high build, fast cure, epoxy primer designed for use under ArmorSeal ®650 or where a high build primer is needed. This primer/sealer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and... [See More]
- Substrate: Concrete; Wood
- Cure / Setting Technology: Multicomponent
- Type: Coating; Primer; Sealer
- Coating Material: Epoxy; Resin
from Graphic Controls
Ink Jet Fluids that Meet or Exceed OEM Standards. High Quality cost competitive inks providing optimal value for our customers. Exacting filtration standards eliminate more particulate matter than OEM inks. 100% "pour-over" compatible with OEM inks. Competitive lead times including available... [See More]
- Substrate: Wood; Other; Pourous Media
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Water
from Rust-Oleum Corporation
12 oz, Aerosol Can; Gray Primer; Used with 1600 System Enamel Aerosol; Provides a solid base for adhesion of topcoat; Wet or dry Sandable; Use on wood, metal, masonry, etc.; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel
- Operating Temperature: ? to 200
from Chase Products Co.
Multi-Purpose Mist Adhesive is a clear, waterproof, non-staining spray adhesive that forms a flexible, permanent bond between like and unlike surfaces. Contains no chlorinated solvents. Ideal for framing and matting, packaging and labeling, lightweight fabricating, general-purpose bonding, etc. [See More]
- Substrate: Metallic; Plastic; Wood; Other; Fabric
- Dispensing Method: Sprayable
- Form: Aerosol
- Location / Orientation: Exterior; Interior
from Aervoe Industries Incorporated
Quick-drying, asphalt-based material, forms a smooth, even, protective film [See More]
- Substrate: Concrete; Metallic; Plastic; Wood; Other; Vinyl
- Cure / Setting Technology: Film Drying
- Type: Coating; Primer
- Coating Material: Resin
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin; Aliphatic
from Graphic Controls
Graphic Controls thermal transfer ribbons are the ideal choice forcoding directly onto flexible packaging. Our thermal transfer ribbonsoffer excellent print quality combined with high durability on abroader range of flexible packaging substrates. Your expiration dates, lot numbers, barcodes and... [See More]
- Substrate: Plastic; Wood; Other; Flexible Packaging
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Resin; Water
from Rust-Oleum Corporation
Multi-surface sandable primer, zero VOC, zero HAP, single component [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Primer
- Coating Material: Acrylic; Resin; Water
from Chase Products Co.
Multi-Purpose Web Adhesive is a clear spray adhesive that forms a non-staining, flexible, permanent bond between like and unlike surfaces. Minimal overspray. Waterproof. Contains no chlorinated solvents. The adjustable spray tip rotates to control the vertical coverage of the spray. Adjustable spray... [See More]
- Substrate: Metallic; Plastic; Wood; Other; Fabric
- Form: Aerosol
- Operating Temperature: 32
- Dispensing Method: Sprayable
from Aervoe Industries Incorporated
Flexible, long-lasting coating, can be used to coat electrical components [See More]
- Substrate: Metallic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat
- Coating Material: Acrylic; Resin; Solvent
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX PRIMER is a general purpose, interior/exterior, VOC compliant, 100% acrylic, low odor, waterborne primer. One component. Water clean up. Fast dry. RECOMMENDED USAGE. For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor... [See More]
- Substrate: Concrete; Wood
- Coating Material: Acrylic; Resin; Water
- Type: Coating; Primer
- Cure Temperature: 50 to 120
from Graphic Controls
Graphic Controls thermal transfer ribbons are the ideal choice forcoding directly onto flexible packaging. Our thermal transfer ribbonsoffer excellent print quality combined with high durability on abroader range of flexible packaging substrates. Your expiration dates, lot numbers, barcodes and... [See More]
- Substrate: Plastic; Wood; Other; Flexible Packaging
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Resin; Water
from Sherwin-Williams
Paint. Highly durable, high quality coatings designed for superior performance on all exterior substrates. Our low-temp formulas let you expand your season. Primers. Get beautiful, long-lasting results for your exterior surfaces. Primers "anchor" finish coats, level uneven areas, seal porous... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Substrate: Concrete; Wood
- Coating Material: Acrylic; Resin; Water
- Type: Coating; Clear Coat
- Cure Temperature: 55 to 100
from Graphic Controls
Graphic Controls thermal transfer ribbons are the ideal choice forcoding directly onto flexible packaging. Our thermal transfer ribbonsoffer excellent print quality combined with high durability on abroader range of flexible packaging substrates. Your expiration dates, lot numbers, barcodes and... [See More]
- Substrate: Plastic; Wood; Other; Flexible Packaging
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Resin; Water
from Sherwin-Williams
Paint. A critical step for any painting project is choosing the right paint. Thanks to today's improved coatings and applicators, even first-time painters can achieve professional-quality results. Primers. Get the beautiful, long-lasting results you expect. Primers "anchor" finish coats, level... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
General Polymers AIRCRAFT HANGAR / INDUSTRIAL PLANT COATING is designed to provide a thin-mil, light reflective, and chemical resistant finish. Advantages. Excellent gloss retention. UV color stability. Chemical and stain resistant. Resists common acids, fuels grease, salt and Skydrol. Uses. [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Thickness: 0.0100 to 0.0120
from Graphic Controls
Graphic Controls thermal transfer ribbons are the ideal choice forcoding directly onto flexible packaging. Our thermal transfer ribbonsoffer excellent print quality combined with high durability on abroader range of flexible packaging substrates. Your expiration dates, lot numbers, barcodes and... [See More]
- Substrate: Plastic; Wood; Other; Flexible Packaging
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Resin; Water
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor “C ” Coating Systems is a 2-3 coat flooring system using a revolutionary new water-based resin technology, AquArmor WBE. It is installed quickly, environmentally friendly and is resistant to problems associated with moisture from the concrete. Advantages. No... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Coating Material: Water
from Graphic Controls
Graphic Controls thermal transfer ribbons are the ideal choice forcoding directly onto flexible packaging. Our thermal transfer ribbonsoffer excellent print quality combined with high durability on abroader range of flexible packaging substrates. Your expiration dates, lot numbers, barcodes and... [See More]
- Substrate: Plastic; Wood; Other; Flexible Packaging
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Resin; Water
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Coating Material: Acrylic; Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor Ceramic Carpet Decorative Flooring Systems combines the historical advantages of epoxy quartz flooring with integral protection against loss of bond due to moisture vapor issues for slabs on grade. Advantages. Withstands vapor emissons. Aesthetically pleasing appearance. [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Coating Material: Epoxy; Resin
from Graphic Controls
Ink Jet Fluids that Meet or Exceed OEM Standards. High Quality cost competitive inks providing optimal value for our customers. Exacting filtration standards eliminate more particulate matter than OEM inks. 100% "pour-over" compatible with OEM inks. Competitive lead times including available... [See More]
- Substrate: Wood; Other; Pourous Media
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Water
from Sherwin-Williams
Sherwin-Williams is a global provider of protective and marine coatings, offering a complete line of high performance coatings technologies to combat corrosion. We deliver unmatched service and coatings specification support to meet our customers ’ coatings needs. [See More]
- Substrate: Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Type: Coating
- Coating Material: Epoxy; Fluoropolymers; Formaldehyde Resins (Phenolic, Furan, Melamine); Resin
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor MCS High Build Hangar Flooring System is designed to provide an 1/8" thick. high gloss, easy to maintain floor finish in a hangar or industrial environment. The unique AquArmor technology offers a fast, environmentally friendly installation that is not susceptible to... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Dispensing Method: Brush / Roll-on
from Graphic Controls
Graphic Controls LLC offers you a risk-free conversion to the perfect inks for Drop-On-Demand (DOD) Large Character and fault detection ink jet coders. Exacting filtration standards eliminate more particulate matter that most OEM inks. ISO 9001 manufacturing standards ensure consistent formulations. [See More]
- Substrate: Wood; Other; Pourous Media
- Cure / Setting Technology: Film Drying
- Type: Ink; Marking Material
- Coating Material: Water; Diethylene Glycol
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor MOISTURE CONTROL SYSTEM is a low odor, self-leveling system to be applied to concrete to control moisture vapor emissions. AquArmor MOISTURE CONTROL SYSTEM can be applied with a v-notched trowel/squeegee. It is designed to provide a refinished surface on concrete prior to... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Dispensing Method: Brush / Roll-on; Sprayable
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor S Slurry System represents a family of flooring systems all built using a single revolutionary new water-based resin technology, AquArmor WBE. System designs include a coating and a 1/16 ” to 1/8 ” slurry. All systems are installed quickly, environmentally... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Dispensing Method: Brush / Roll-on; Sprayable
from Sherwin-Williams Protective & Marine Coatings
General Polymers CERAMIC CARPET #400 is an 1/8 ” system which incorporates decorative colored quartz aggregates with high solids epoxy resins and chemical resistant grout and topycoats to form a protective surfacing system which is aesthetically pleasing, slip resistant, durable and resistant... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Ceramic
- Coating Material: Epoxy; Resin
from Sherwin-Williams Protective & Marine Coatings
General Polymers CERAMIC CARPET #554 combines EPO-FLEX ® crack isolation system with colored quartz aggregate to provide the toughness and flexibility of EPO-FLEX with the beauty and durability of quartz broadcast flooring. Flexibility is achieved without the use of plasticizers or other... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Ceramic
- Operating Temperature: 50 to 90
from Sherwin-Williams Protective & Marine Coatings
General Polymers CHIP RESISTANT HIGH BUILD HANGAR INDUSTRIAL FLOOR is designed for interior concrete floors that requires an impact resistant, high gloss, easy to maintain finish. This 35 mil system is resistant to staining and chemical attack from certain common acids, alkalies, fuels, grease, salt... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Coating Material: Epoxy; Polyurethane; Resin; Vinyl; Water
from Sherwin-Williams Protective & Marine Coatings
General Polymers DECORATIVE MOSAIC WB COATING SYSTEM is a mosaic pattern floor covering. These vinyl chips are incorporated in a water-based epoxy and sealed with a clear coat of an abrasion resistant, water-based polyurethane that is available in a high gloss or satin finish. Its innovation base... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Operating Temperature: 50 to 90
from Sherwin-Williams Protective & Marine Coatings
General Polymers TPM #115-U1 DECORATIVE TROWELED SYSTEM is a 3/16 ” protective resurfacing systems utilizing an epoxy and silica aggregates mortar, high build grout and seal coats and selected decorative aggregates where a heavy duty decorative flooring system is required. Advantages. Low VOC... [See More]
- Substrate: Concrete; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Coating Material: Epoxy; Resin; Silica Aggregates Mortar, High Build Grout