Coating Architectural Coatings
from AGC Chemicals Americas, Inc.
AsahiGuard E-SERIES products are fluorinated water/oil repellents that contain no PFOA (at or above detection limits), longer chain PFCs or their precursors. Drawing on fluorine ’s extraordinary properties, these specialty chemicals provide excellent protection and durability against water,... [See More]
- Type: Coating; Sealer; Stain
- Features: Protective; Waterproof
- Form: Liquid
- Location / Orientation: Pavement / Walkway (optional feature)
from FORREST Technical Coatings
An industrial-grade, two-component acrylic polyurethane designed to provide added chemical and resistance with a satin gloss and textured appearance. Catalyst available for either interior or exterior use. [See More]
- Type: Coating; Paint; Clear Coat
- Substrate: Aluminum; Ceramic; Metallic; Plastic; Steel; Other; Fiberglass
- Cure / Setting Technology: Film Drying; Multicomponent
- Coating Material: Alkyd; Polyurethane; Resin; Solvent
from AGC Chemicals Americas, Inc.
AGC ’s new FibraLAST ™ non-fluorinated sizing additives protect paper products from both water and food oils. This new barrier technology is ideal for molded, formed fiber, and cardboard products such as fast-casual bowls, plates, containers and pizza boxes. FibraLAST grades are unique... [See More]
- Type: Coating
- Operating Temperature: 32 to 176
- Substrate: Other; Paper Products
- Form: Liquid
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Coating Material: Epoxy; Resin; Solvent
from AGC Chemicals Americas, Inc.
FibraLAST® non-fluorinated oil/water repellents are ideal for technical textiles. When applied as a thin polymeric coating on textiles, they form a microscopically rough texture that acts as a chemical barrier. This treatment enables textiles to repel oil-based stains and fluids, causing them to... [See More]
- Type: Coating
- Form: Liquid
- Substrate: Other; Paper Products
- Features: Chemical Resistant; Waterproof
from FORREST Technical Coatings
An electrostatic developed specifically to minimize the electrostatic discharge (ESD) created when two surfaces with different voltages meet one another. When properly applied these coatings can prevent significant damage caused by electrostatic discharge. [See More]
- Type: Coating; Paint
- Substrate: Metallic; Plastic; Steel
- Cure / Setting Technology: Thermoset
- Form: Powder
from AGC Chemicals Americas, Inc.
Fluon® PFA (perfluoro alkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional... [See More]
- Type: Coating
- Operating Temperature: -328 to 500
- Coating Material: Fluoropolymers; Resin
- Dispensing Method: Powder Coating
from FORREST Technical Coatings
Standard polyester TGIC powders are excellent coatings that protect the end product while also providing many decorative colors and special effects looks at the same time. These products can be used for interior or exterior applications. Variety of gloss levels and textures available. [See More]
- Type: Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Cure Temperature: 400
from AGC Chemicals Americas, Inc.
Fluon ® PTFE Micro powders are PTFE lubricants milled to a very fine powder while retaining excellent lubricity properties. These powders can be compounded in rubber and plastics or dispersed in liquids to improve friction and wear properties of the base material. Many grades are used in... [See More]
- Type: Coating
- Form: Powder or Granular Material
- Coating Material: Fluoropolymers
- Dispensing Method: Powder Coating
from FORREST Technical Coatings
Polyurethane coatings are formulated to have excellent flow characteristics while providing good mechanical and chemical resistance. These products also offer exterior durability. [See More]
- Type: Coating; Paint
- Substrate: Aluminum; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Coating Material: Polyurethane; Resin; Polyester
from AGC Chemicals Americas, Inc.
LUMIFLON ® is the first solvent-soluble fluoropolymer resin for coatings that can be cured at room temperature or at elevated temperatures. LUMIFLON resins, used in topcoats, are ultra-weatherable, and maintain their excellent appearance on buildings, bridges, and other structures, as well as on... [See More]
- Type: Coating
- Substrate: Aluminum
- Cure / Setting Technology: Can Be Cured At Room or High Temperatures
- Coating Material: Fluoropolymers; Resin
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Type: Coating; Paint; Primer; Base Coat
- Substrate: Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Alkyd; Formaldehyde Resins (Phenolic, Furan, Melamine); Resin; Solvent
from FORREST Technical Coatings
FIRMmarker ® Road Marker Adhesive is a 2-part epoxy adhesive designed to affix traffic markers (RPMs), delineators, surface mount traffic indicators, and safety posts to concrete, but can also be used to bond concrete to a variety of other materials such as concrete, wood, or asphalt. FIRMmarker... [See More]
- Type: Coating
- Coating Material: Epoxy Adhesive
- Substrate: Asphalt; Concrete; Wood
- Form: Cartridge
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Coating Material: Epoxy; Resin; Solvent
from FORREST Technical Coatings
Originally engineered for high temperature resistance, INFERNEX ® L-1200 has proven itself a reliable coating for more than 30 years due to its unique blend of pigments in a silicone polymer resin. Designed for rapid curing and good film integrity, this product also provides good corrosion... [See More]
- Type: Coating; Paint
- Substrate: Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Solvent
from FORREST Technical Coatings
Originally developed for exhausts, PS-1000 has earned its reputation for decades as the workhorse for protecting exhaust systems, engines, and silencers. It ’s recognized by its black smooth finish and ability to withstand temperatures up to 1000 ° F (538 ° C). It also features... [See More]
- Type: Coating; Paint
- Substrate: Metallic; Steel
- Cure / Setting Technology: Thermoset
- Cure Temperature: 450
from FORREST Technical Coatings
Stove Bright High Temperature Paint is a liquid coating sprayed on properly prepared metal substrate for a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Backed by decades of proven performance, these coatings are the industry standard for heat resistance in... [See More]
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
- Cure / Setting Technology: Film Drying; Thermoplastic
- Coating Material: Resin; Silicone; Solvent
from RDM Industrial Products, Inc.
Specially formulated to protect conductive/dissipative flooring, this finish will lengthen its life. It offers long lasting, high gloss, static dissipative properties. With low a VOC level this product is as safe as it is easy to use. Resistance: 107-109 Ohms/sq. Durable. Facilitates dirt removal. [See More]
- Type: Coating; Clear Coat
- Substrate: Ceramic; Plastic
- Cure / Setting Technology: Film Drying
- Coating Material: Water
from 3M Advanced Materials Division
Elastomer-based formula creates a tough, flexible, abrasion resistant coating. Resists heat, flame, and weathering for lasting, reliable performance. Resists gasoline, aircraft fuel, hydraulic oil and water. Can be applied by spraying, brushing or flow coating. 3M ™ Scotch-Weld ™... [See More]
- Type: Coating
- Form: Aerosol; Liquid
- Substrate: Glass; Wood
- Features: Abrasion, Erosion or Wear Resistant
from Columbia Chemical Corporation
COLSID ® AP is a process for acid chloride zinc plating specially designed for mixed NH4Cl/KCl baths. COLSID AP contains a special ductilizer compound which insures extremely ductile, bright deposits. It produces little or no foam and can operate at high temperatures - over 125 °F/52 °C. [See More]
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Acid Chloride Zinc Plating
- Substrate: Steel
- Form: Liquid
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Type: Coating; Enamel; Base Coat
- Substrate: Aluminum; Concrete; Metallic; Steel
- Cure / Setting Technology: Multicomponent
- Coating Material: Acrylic; Polyurethane; Resin
from Abrisa Technologies
Abrisa Technologies ’ CleanVue ™ PRO – Series of anti-reflection (AR) coatings combine improved handling, cleaning, water shedding, and robust performance with excellent anti-reflective properties making them ideal for displays and optical windows intended for use in “tough... [See More]
- Type: Coating
- Features: Weather Resistant
- Substrate: Glass
- Location / Orientation: Exterior; Interior
from Sherwin-Williams
Exterior Products. Whether it ’s new construction or a recoat, a single plane or a commercial fleet, we have the quality products you need to make every application last. Interior Primers. Aerospace Coatings offered by Sherwin-Williams are available in a variety of Primer products specifically... [See More]
- Type: Coating; Paint; Primer; Base Coat; Clear Coat
- Substrate: Metallic
- Cure / Setting Technology: Film Drying
- Coating Material: Resin
from Acoustical Solutions, Inc.
Sound Damping Compound is a water based damping compound for the treatment of vibrating metal, wood, glass, ceramic and most plastic surfaces. This material imparts vibration damping and a shift in the dominant frequency. The resulting structure borne noise reduction provides a means of improving... [See More]
- Type: Coating; Sound Damping
- Substrate: Aluminum; Anodized; Ceramic; Glass; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Thermoset
- Coating Material: Resin; Rubber; Water
from Dryvit UK
Acrylic coating for changing the colour of existing Dryvit finishes or use with Custom Brick. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for... [See More]
- Type: Coating; Paint
- Coating Material: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Sekisui Voltek, LLC
Our Volextra process is an extremely flexible extrusion coating capability. Using state of the art technology, solid plastic is permanently melt bonded to our Volara ® foams. Polyolefin based coatings can be engineered to match your design needs, in a range of thicknesses from 0.0015" to 0.055". [See More]
- Type: Coating
- Coating Material: Resin; Vinyl; Ethylene Vinyl Acetate Copolymer
- Cure / Setting Technology: Thermoplastic
- Thickness: 0.0015 to 0.0550
from Fosroc Limited
Dekguard CP is a single component weather resistant impregnation and glaze, based on acrylic copolymer and siloxane. Dekguard CP combines an unique ability to protect against attacks by water, carbon dioxide (CO2) and other chemicals, with an ability to allow water vapour to escape from the... [See More]
- Type: Coating; Sealer
- Location / Orientation: Floor
from Wacker Chemical Corp.
ELASTOSIL ® E91 is a self-levelling silicone rubber with very good mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It can also be cured in steam oven within 3 min. Properties. fast curing in steam oven. high elongation properties. acetic... [See More]
- Type: Coating; Sealer
- Substrate: Other; Textiles
- Cure / Setting Technology: Reactive or Moisture Cured
- Coating Material: Resin; Rubber; Silicone
from AkzoNobel N.V.
AkzoNobel offers an innovative range of concrete repair and protection solutions that combine leading technical performance with simple application.Whether it is at the new construction phase, where flooring, waterproofing or defect resolution may be required, or repair and remediation of existing... [See More]
- Type: Coating
- Location / Orientation: Exterior
- Substrate: Concrete
from Sanchem, Inc.
is the electrical contact grease of choice in new electrical installations and maintenance because of its excellent performance in keeping metals free from corrosion. This rust preventitive has been used for over 50 years to preventing corrosion in electrical connectors from low micro-power... [See More]
- Type: Coating; Primer; Rust Preventive Coating
- Substrate: Concrete; Metallic
- Cure / Setting Technology: Film Drying
- Form: Paste / Mastic
from Kansai Paint (America), Inc.
PROTECTING BUILDINGS AND CREATING BEAUTIFUL EXTERIORS WITH EXCEPTIONAL FUNCTIONAL COATINGS FOR ARCHITECTURAL USE.Our building paints allow dirt to be washed away by rain water and also fill and expand into cracks in the wall caused by time-related degradation in order to prevent further damage by... [See More]
- Type: Coating; Paint (optional feature); Sealer (optional feature)
- Location / Orientation: Exterior
- Features: Protective
from Sauereisen, Inc.
Arctikure No. 230 is a three-component epoxy monolithic floor system that is used to protect concrete and other substrates. from chemical and physical abuse. No. 230 is designed for cold room applications and will cure at temperatures as low as 35oF. Arctikure has the durability to withstand the... [See More]
- Type: Coating
- Substrate: Concrete
- Cure / Setting Technology: Film Drying; Multicomponent
- Coating Material: Epoxy; Resin
from Daikin America, Inc.
OPTOOL is fluorine compound which has very secific structure and has excellent fouling prevention performance. Especially it provides excellent fingerprint marking prevention capability. [See More]
- Type: Coating; Anti-Fouling Agent for Lenses/Displays
- Substrate: Glass
- Cure / Setting Technology: Film Drying
- Coating Material: Fluoropolymers; Resin; Fluorine
from Epoxies Etc...
Deco-Coat 2501 Resin is a two component high gloss epoxy resin that forms a hard enamel like finish. This versatile coating is a liquid resin that is safe and easy to use. It does no contain any solvents or offensive odors. DC-2501R is also available in low viscosity (DC-2501R LV). [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Glass; Metallic; Plastic; Wood
- Cure / Setting Technology: Multicomponent; Thermoset
- Coating Material: Epoxy; Resin
from National Photocolor Corp.
Adding to our large inventory of coatings, NPC now carries minimal loss 45%/55% R/T Average coatings for wavelength ranges 400nm to 700nm, 700nm to 900nm, 1um to 2um and 3um to 5um. We can select these coated pellicles for single wavelength and angle applications for P, S, or unpolarized light. [See More]
- Type: Coating
- Thickness: 8.00E-5 to 2.00E-4
- Substrate: Other; Nitrocellulose
- Operating Temperature: -40 to 257
from Valspar Corporation (The)
Priced to flow. Our Acrodize ® coating is a formula for success. A tough, hard, high-traffic warrior with a price that ’s easy on the budget. Developed for storefronts, fast food operations, schools, shopping malls and all manner of heavy-use public spaces. Looks great, wears incredibly... [See More]
- Type: Coating
- Coating Material: Fluoropolymers; Resin; 70% PVDF
- Substrate: Aluminum
- Features: Weather Resistant
from JARO Corp.
At Jaro Corp, we manufacture and apply our own dielectric coating: JARO 650 Series Polyimide. This coating is a proprietary polyimide thermo set material, offering outstanding characteristics which include: Remarkable resistance to high temperatures. It also performs well at cryogenic levels. High... [See More]
- Type: Coating; Nonconductive, Insulating Coating
- Substrate: Other; Electronic Component Substrates
- Cure / Setting Technology: Thermoset
- Coating Material: Polyimide
from Titebond
Titebond ® 531 Moisture Control System solves the challenges of moisture transfer from concrete subfloors to wood flooring by reducing the transmission rate of moisture. The system consists of two pre-measured components that are mixed together to form a coating that is applied to the concrete... [See More]
- Type: Coating
- Location / Orientation: Floor
- Substrate: Concrete
from ADSIL Inc.
Effective barrier facilitates easy removal of most common forms of graffiti [See More]
- Type: Coating; Clear Coat; Sealer
- Substrate: Aluminum; Ceramic; Concrete; Metallic
- Cure / Setting Technology: Film Drying
- Coating Material: Inorganic (Silicate, Cement, Glaze); Inorganic Siloxane
from Dampney Company, Inc.
Elastoid 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides... [See More]
- Type: Coating
- Substrate: Aluminum; Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Rubber
from ZIRCAR Refractory Composites, Inc.
ZIRCARMold Mix 6 is a refractory-molding compound designed to allow replication of three-dimensional objects in glass. It comes as a paste, which is applied to a suitably prepared pattern and hardens on drying. Properly prepared molds of Mold Mix 6 will resolve the finest details and possess good... [See More]
- Type: Coating; Ceramic; Refractory Molding Compound
- Substrate: Glass
- Cure / Setting Technology: Film Drying
- Coating Material: Inorganic (Silicate, Cement, Glaze)
from Chase Products Co.
Champion Sprayon ® Anti-Fog Plexiglass Cleaner makes cleaning easier and faster. Leaves a protective coating that repels dirt, dust, finger smudges, scratches and water spots. Contains no abrasives, silicones or ammonia. Foaming plexiglass cleaner and protectant. Does not contain ammonia,... [See More]
- Type: Coating
- Form: Aerosol
- Substrate: Other; Plexiglass
- Dispensing Method: Sprayable
from Sherwin-Williams Protective & Marine Coatings
SherPlate 360 is a 100% solids epoxy coating, formulated specifically for immersion service in refined fuel storage tanks, petroleum tanks, CHT tanks, and ballast tanks. The high build, edge-retentive properties provide superior protection compared to conventional epoxies. 100% solids, low VOC. 1:1... [See More]
- Type: Coating
- Coating Material: Epoxy; Resin
- Substrate: Concrete; Steel; Other; Iron
- Cure Temperature: 50 to 100
from Protavic America, Inc.
Silver filled epoxy system for tantalum & ceramic termination coating. This product is commonly used for flexible termination of capacitors and offers high strength and flexibility. This product is the "gold" standard for flexible termination. Solvent adjusted. Please contact us for product... [See More]
- Type: Coating; Varnish
- Substrate: Metallic
- Cure / Setting Technology: Thermoset
- Coating Material: Epoxy; Metal Filled; Resin; Silver
from Redwood Plastics
Wearlon Super F-4 is the hardest in the line of Wearlon coatings, improving abrasion resistance and prolonging the life of your propeller. It is a water based, environmentally friendly coating that can be painted or sprayed on. Wearlon Super F-4 is a non-stick foul release coating that minimizes... [See More]
- Type: Coating; Non-Stick Foul Release
- Substrate: Aluminum
- Cure / Setting Technology: Film Drying
- Coating Material: Water
from Crosslink
Coatings currently are available to prevent corrosion. However, many of them employ hexavalent chromium, a highly toxic chemical and known carcinogen. Current legislation in Europe (RoHS) and California (EWRA) are helping to phase out the use of this chemical.Crosslink offers a new, non-toxic smart... [See More]
- Type: Coating
- Substrate: Metallic
- Cure / Setting Technology: Film Drying
- Coating Material: Resin; Electroactive Polymer
from Owens Corning® FOAMGLAS® Insulation
A highly flexible, acrylic latex coating used with FOAMGLAS ® insulation where a superior weather barrier coating is required. It is available in colors and may be applied by glove, trowel, brush or spray. U.S. Stock Item. Available in standard 5 gallon pails. E.U. Stock Item. Available in... [See More]
- Type: Coating
- Coating Material: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Operating Temperature: -30 to 220
from Axalta Coating Systems, LLC
Axalta powder coatings offer a superb technology with benefits for many industrial applications. These products have earned a reputation for corrosion resistance and durability due to superior edge coverage, thick film build, and no primer required. With virtually zero levels of volatile organic... [See More]
- Type: Coating
- Coating Material: Epoxy (optional feature); Metal Filled (optional feature); Resin (optional feature); Silver
- Cure / Setting Technology: Thermoplastic (optional feature)
- Dispensing Method: Powder Coating
from Aervoe Industries Incorporated
Quick-drying, asphalt-based material, forms a smooth, even, protective film [See More]
- Type: Coating; Primer
- Substrate: Concrete; Metallic; Plastic; Wood; Other; Vinyl
- Cure / Setting Technology: Film Drying
- Coating Material: Resin
from RDM Industrial Products, Inc.
This industry popular finish offers low VOC, high gloss, and static dissipative properties. High abrasion resistance. High gloss. Non flaking. Non slippery. Low cost. Low tribogeneration generation. UL listed. No formaldehyde or phthalates. Water based. Surface resistance (RTT): 107-109 Ohms @100... [See More]
- Type: Coating; Clear Coat
- Substrate: Ceramic; Plastic
- Cure / Setting Technology: Film Drying
- Coating Material: Water
from Columbia Chemical Corporation
EXTREME ® 110 is an economical process for plating brilliant, level, ductile zinc deposits in acid chloride zinc plating electrolytes using potassium chloride and boric acid (ammonia-free). EXTREME 110 additives promote superior bath solubility and higher temperature tolerance compared to... [See More]
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Acid Chloride Zinc Plating
- Substrate: Steel
- Form: Liquid
from Rust-Oleum Corporation
Anti-slip one-step pedestrian grade, single component anti-slip coating [See More]
- Type: Coating; Paint
- Substrate: Concrete
- Cure / Setting Technology: Film Drying
- Coating Material: Epoxy; Resin
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
An acrylic stain used in conjunction with Drytex Wood to give a natural wood effect appearance. [See More]
- Type: Coating; Paint; Stain
- Coating Material: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Fosroc Limited
Nitocote EP403 is a two pack, solvent free, epoxy resin material. It is supplied in pre-measured quantities ready for site mixing and use. The material cures to provide a smooth, tough and resistant finish. It is available in light grey. [See More]
- Type: Coating; Sealer
- Location / Orientation: Floor
from AkzoNobel N.V.
Hammerite has a rich history. The name first appeared in 1962, when Allen Forster developed a hammered paint for use in electrical insulation. But Hammerite first appeared in the format we know today in 1984. It was launched to the UK DIY market as a single-pack, air-drying, corrosion-resistant... [See More]
- Type: Coating; Paint
- Features: Corrosion Resistant; Protective
- Substrate: Metallic
- Location / Orientation: Exterior
from Sanchem, Inc.
is a dry in place cleaner and conversion coating solution for use on iron, steel or zinc surfaces. When the surface reaction is complete the protected steel or iron becomes blue-black in color. This protective coating has excellent corrosion protection from the effects of hummidty and is an... [See More]
- Type: Coating; Primer; Conversion Coating
- Substrate: Metallic; Steel; Other; Zinc
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Kansai Paint (America), Inc.
PROVIDING POWERFUL PROTECTION FOR SUBSTRATES WHILE MINIMIZING ENVIRONMENTAL IMPACTAs a pioneer in ultra-thick film epoxy resin coatings, Kansai Paint has released a heavy-duty anticorrosion coating that protects infrastructures from the dangers of a harsh natural environment. In addition, we have... [See More]
- Type: Coating
- Features: Protective
- Coating Material: Epoxy; Resin
- Location / Orientation: Exterior
from Epoxies Etc...
Deco-Coat 2570 Epoxy Resin is an ultra clear, high gloss, durable coating. This liquid polymer epoxy resin is formulated without solvents and is therefore safe and easy to use. It is formulated in a convenient 1:1 by volume mix ration. [See More]
- Type: Coating; Clear Coat
- Substrate: Wood
- Cure / Setting Technology: Multicomponent; Thermoset
- Coating Material: Epoxy; Resin
from Valspar Corporation (The)
Solid StainView stain colors. Total coverage gives maximum protection. VIEW PRODUCT DETAILS. Solid Color Acrylic Siding Stain. Solid Color Decking Stain. Semi-Solid StainView stain colors. Extra pigment adds longevity. VIEW PRODUCT DETAILS. Semi-Solid Siding and Fence. Semi-Solid Deck & Siding... [See More]
- Type: Coating; Stain
- Substrate: Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Titebond
Titebond ® 531 PLUS Concrete Moisture Control System solves the challenges of moisture transfer from concrete subfloors to wood and resilient flooring by reducing the transmission rate of moisture. The system consists of two pre-measured components that are mixed together to form a coating that... [See More]
- Type: Coating
- Location / Orientation: Floor
- Substrate: Concrete
from Dampney Company, Inc.
Endcor 772 protects steel surfaces subjected to immersion in fresh or salt water, exposure in tidal or splash zones, or burial in soil. It is effective on the interiors of tanks and lines containing brine, crude oil, petroleum products, sewage or strong alkalies. It is resistant to a wide range of... [See More]
- Type: Coating; Clear Coat
- Substrate: Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Epoxy; Resin
from Chase Products Co.
Champion Sprayon ® Stainless Steel Cleaner, Polish and Protectant is a unique oil-in-water emulsion that quickly cleans, shines and protects without scratching. Heavy-duty cleaning agents and surfactants deep-clean, and remove smudges, soil, oil and grease stains, water marks and rust without... [See More]
- Type: Coating
- Form: Aerosol
- Substrate: Metallic; Steel
- Dispensing Method: Sprayable
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Type: Coating
- Substrate: Concrete; Steel; Wood
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin; Polyamide
from Redwood Plastics
Anti-Graffiti Wearlon ®. Put Scraping and Painting to an End. Our Wearlon ® Anti-Graffiti Coatings protects surfaces from graffiti vandals. An epoxy-silicone, three component, water-based, room temperature cure coating. The Wearlon coating with its slick surface resists spray paint,... [See More]
- Type: Coating; Anti-Graffiti
- Substrate: Metallic
- Cure / Setting Technology: Film Drying; Multicomponent; Room Temperature Cure Coating
- Coating Material: Epoxy; Resin; Silicone
from Owens Corning® FOAMGLAS® Insulation
A low temperature anti-abrasive (LTAA) coating that reduces abrasion from vibrating piping or equipment by providing a durable bore coating to insulation substrates across a wide range of service temperatures. Product is idea for application to FOAMGLAS ® insulation blocks, curved segments... [See More]
- Type: Coating
- Substrate: Other; Insulation
- Cure / Setting Technology: Film Drying
- Coating Material: Rubber; Water
from RDM Industrial Products, Inc.
This long lasting urethane enhanced static dissipative floor finish is the prime defense in ESD environments. With consistent resistance reading of 107-109 Ohms @100 volts, this water based finish is used worldwide to protect electronic devices from damage and to protect workers from explosion or... [See More]
- Type: Coating; Clear Coat
- Substrate: Ceramic; Plastic
- Cure / Setting Technology: Film Drying
- Coating Material: Water
from Columbia Chemical Corporation
COLZINC ® ACF-II is a process for alkaline cyanide-free zinc plating that produces brilliantly bright, and extremely ductile deposits. Its excellent low current density covering and throwing power make it especially suitable for steel parts with deep recesses such as fittings, tubes, or computer... [See More]
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Alkaline Zinc Plating
- Substrate: Steel
- Form: Liquid
from Rust-Oleum Corporation
Three component, epoxy resin polymer, brightly colored quartz aggregate [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
100% acrylic-based finish with multi-colored quartz aggregates. [See More]
- Type: Coating; Paint
- Coating Material: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Fosroc Limited
Galvafroid zinc rich coating is formulated as an easily applied, cold galvanising protection against corrosion on all ferrous metals. Galvafroid has a mid-grey, matt finish. [See More]
- Type: Coating
- Location / Orientation: Floor
from Dampney Company, Inc.
Prevents chloride induced external stress corrosion cracking from cryogenic to 1000F [See More]
- Type: Coating
- Substrate: Metallic; Steel; Other; Stainless Steel
- Cure / Setting Technology: Film Drying; Thermoset (optional feature)
- Coating Material: Resin; Silicone
from Chase Products Co.
These double-sided wipes are premoistened with a unique citrus-based formula designed to clean and polish stainless steel surfaces, while protecting them from the damaging effects of oxidation and corrosion. Each wipe is a dual-purpose engineered-cloth towel, with an abrasive (but non-scratching)... [See More]
- Type: Coating
- Features: Corrosion Resistant; Protective
- Substrate: Metallic; Steel
- Location / Orientation: Exterior; Interior
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1K Waterbased Urethane Floor Enamel is a gloss, high performance, one component polyester waterbased urethane, formulated specifically for industrial floor applications. Provides outstanding abrasion resistance, good chemical resistance, with excellent color and gloss retention. Fast... [See More]
- Type: Coating; Enamel
- Coating Material: Polyurethane; Resin; Water
- Substrate: Concrete
- Cure Temperature: 55 to 120
from Redwood Plastics
Wearlon ® provides a non-stick coating that adds lubricity to nearly any surface to decrease build up and lower maintenance costs. Clean up is faster and easier. Super F-3M has tremendous water shedding properties and is spectacular in its hydrophobic properies, even approaching that which is... [See More]
- Type: Coating; Non-Stick
- Features: Waterproof; Non-stick
- Cure / Setting Technology: Film Drying
- Location / Orientation: Exterior
from Owens Corning® FOAMGLAS® Insulation
A specially formulated primer that promotes adhesion of the PITTWRAP ® SS Jacketing when the laps are slightly dusty or the application is below 10 °C (50 °F). U.S. Stock Item. Available in standard 1 gallon containers. [See More]
- Type: Coating; Paint; Primer
- Operating Temperature: -27 to 180
- Coverage: 75
- Form: Liquid
from Columbia Chemical Corporation
EXCEL ® 800 is cutting edge technology for producing acid chloride-like zinc deposit brightness from an alkaline cyanide-free zinc plating solution. Deposits are extremely ductile even at thickness over 25 microns (1 mil). EXCEL 800 is deal for both rack and barrel plating lines, and performs... [See More]
- Type: Coating; Zinc Plating
- Coating Material: Zinc; Alkaline Zinc Plating
- Substrate: Steel
- Form: Liquid
from Rust-Oleum Corporation
Heavy duty static control floor topping, 3 component epoxy resin polymer [See More]
- Type: Coating; Clear Coat; Sealer
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
A premixed, 100% acrylic-based finish designed to replicate the appearance of limestone blocks. [See More]
- Type: Coating; Paint
- Coating Material: Acrylic; Resin
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Dampney Company, Inc.
Stainless steel coating prevents chloride induced external stress corrosion cracking to 1000F [See More]
- Type: Coating
- Substrate: Metallic; Steel; Other; Stainless Steel
- Cure / Setting Technology: Film Drying; Thermoset (optional feature)
- Coating Material: Resin; Silicone
from Chase Products Co.
CS+ Lubricant is a 4-way lube that stops annoying squeaks, guards against rust and corrosion, releases rusted or frozen metal parts with instant penetration, and removes moisture. It will displace water and moisture-proof all types of electrical equipment, relay switches, wet engines, distributors,... [See More]
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Multicomponent
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®33 EPOXY PRIMER/SEALER is a low viscosity, 100% solids, high build, fast cure, epoxy primer designed for use under ArmorSeal ®650 or where a high build primer is needed. This primer/sealer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and... [See More]
- Type: Coating; Primer; Sealer
- Substrate: Concrete; Wood
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin
from Owens Corning® FOAMGLAS® Insulation
PC ® 74 A1 is a pre-mixed mineral adhesive and basic plaster, class CS II according to DIN EN 998-1 for interior insulation. Hydraulic hardening and surfactant active. The PC ® 74 A1 is non-combustible (building material class A1 according to EN 13501). PC ® 74 A1 mixed with water, can... [See More]
- Type: Coating; Base Coat
- Coating Material: Water; Mixed Mineral
- Cure / Setting Technology: Film Drying
- Thickness: 0.1181 to 0.2756
from Columbia Chemical Corporation
COLCAD ® 100 is a brightener for cyanide cadmium plating for producing brilliant, ductile metal deposits over a wide current density range, and is suitable for both rack and barrel plating. COLCAD 100 is now the only Boeing approved cadmium brightener available for these applications. Under the... [See More]
- Type: Coating; Cadmium Plating
- Coating Material: Zinc; Cyanide Cadmium Zinc Plating
- Substrate: Steel
- Form: Liquid
from Rust-Oleum Corporation
Two component, water based epoxy coating, low risk of flammability [See More]
- Type: Coating
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin; Water
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
Architectural finish in the look of brick, stone, slate and tile for vertical surfaces. [See More]
- Type: Coating; Paint
- Coating Material: Resin
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Dampney Company, Inc.
Selective Black, silicone-based paint which collects heat more efficiently than ordinary black paint and resists out gassing to 400F. It is designed to selectively absorb wavelengths with the greatest heat content when used on the metal surfaces of collector panels having glazed covers. It collects... [See More]
- Type: Coating; Paint
- Substrate: Aluminum; Metallic; Steel; Other; Stainless Steel
- Cure / Setting Technology: Film Drying; Thermoset (optional feature)
- Coating Material: Resin; Silicone
from Chase Products Co.
Penetrating Oil and Demoisturant will displace water and moisture-proof all types of electrical equipment, even if the equipment is completely submerged. It saves production, maintenance and repair time, protects and preserves valuable equipment, waterproofs ignition systems, and protects metal... [See More]
- Type: Coating
- Substrate: Metallic
- Cure / Setting Technology: Multicomponent
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 PRIMER is a heavy duty, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor primer. Provides overall performance comparable to that of most solvent borne epoxy floor systems. Designed for use under ArmorSeal ®finish coats. [See More]
- Type: Coating; Primer
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin; Water; Polyamide
from Owens Corning® FOAMGLAS® Insulation
A silicone-based, single-component coating, sealant and adhesive which cures by reaction with humidity. It is odorless, free of solvents, isocyanates and PVC. It provides good weathering, UV and mechanical resistance, as well as excellent chemical resistance, and is classified as a flame retardant... [See More]
- Type: Coating
- Coating Material: Resin
- Cure / Setting Technology: Reactive or Moisture Cured
- Operating Temperature: -58 to 248
from Columbia Chemical Corporation
MARQUEE ® ENVY MP is an ELV compliant, mid phosphorous, electroless nickel plating process. It contains no lead nor cadmium, and meets ASTM-B-733 and AMS2404 C specifications. Being a two component process, it is easy to use and has a 1:1 replenishment rate. It provides a deep, brilliant... [See More]
- Type: Coating; Electroless Nickel Deposit
- Coating Material: Electroless Nickel Plating Solution
- Substrate: Aluminum; Steel; Other; Brass
- Form: Liquid
from Rust-Oleum Corporation
Two component, low odor, low VOC, 100% solids epoxy floor coating [See More]
- Type: Coating; Base Coat
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin
from Sherwin-Williams
Paint. Highly durable, high quality coatings designed for superior performance on all exterior substrates. Our low-temp formulas let you expand your season. Primers. Get beautiful, long-lasting results for your exterior surfaces. Primers "anchor" finish coats, level uneven areas, seal porous... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
Exterior and interior quartz aggregate finish. [See More]
- Type: Coating; Paint
- Coating Material: Resin
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Chase Products Co.
Silicone Lubricant frees sticking mechanisms, eliminates fan belt squeaks, metal-to-metal noises and rubber-to-metal squeaks. It repels water and ice and retards rust and corrosion, lubricates hinges and prevents freezing of exposed locks. Excellent for waterproofing ignition systems and other... [See More]
- Type: Coating; Primer
- Substrate: Metallic
- Cure / Setting Technology: Multicomponent
- Form: Aerosol
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 is a heavy duty, interior, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor coating. This dries rapidly to an extra tough, gloss finish which will withstand heavy industrial traffic, abrasion, and general chemical attack. Provides... [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin; Water; Polyamide
from Owens Corning® FOAMGLAS® Insulation
PITTSTOP ™ 196 Vapor Stop is a two component, butyl rubber elastomer specially designed for use in FOAMGLAS ® insulation systems. Its service temperature range is specifically suited for Liquid Natural Gas and other cryogenic insulation systems. U.S. Stock Item. Available in standard two... [See More]
- Type: Coating
- Thickness: 0.0551 to 0.0630
- Coating Material: Rubber
- Operating Temperature: -320 to 250
from Columbia Chemical Corporation
Lac-Chro-SEAL ® is a non-hazardous lacquer coating for enhanced corrosion resistance on electroplated deposits and base metals. It air dries quickly to a very thin, clear & glossy finish which prevents fingerprints and provides significant protection to high humidity conditions. [See More]
- Type: Coating; Clear Coat; Sealer; Lacquer
- Substrate: Metallic; Other; Zinc & Zinc Alloy Deposits Over Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Zinc; Water
from Rust-Oleum Corporation
Clear, fast drying, oil modified, single component waterborne polyurethane [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Polyurethane; Resin; Water
from Sherwin-Williams
Paint. A critical step for any painting project is choosing the right paint. Thanks to today's improved coatings and applicators, even first-time painters can achieve professional-quality results. Primers. Get the beautiful, long-lasting results you expect. Primers "anchor" finish coats, level... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
Flexible, elastomeric exterior finish. [See More]
- Type: Coating; Paint
- Coating Material: Resin; Rubber
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Chase Products Co.
Silicone Mold Release Spray is a colorless, dry spray that reduces friction and buildup on molds without leaving an oily or greasy surface. Dries fast. Extends the life of equipment. Cuts cleanup time. This non-staining formula has a low surface tension and performs in temperatures from -47 °F... [See More]
- Type: Coating
- Substrate: Glass; Metallic; Wood; Other; Rubber
- Cure / Setting Technology: Multicomponent
- Operating Temperature: -47 to 399
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron
- Cure / Setting Technology: Multicomponent
- Coating Material: Polyurethane; Resin
from Owens Corning® FOAMGLAS® Insulation
A liquid applied moisture cure vapor retarder coating especially formulated for use with FOAMGLAS ® insulation. PITTCOTE ® 300E coating can be used as a protective/vapor retarder coating over FOAMGLAS ® insulation under metal jacket or other UV resistant finish or as vapor retarder... [See More]
- Type: Coating
- Substrate: Asphalt (optional feature); Metallic (optional feature)
- Cure / Setting Technology: Reactive or Moisture Cured
- Cure Temperature: 77
from Columbia Chemical Corporation
Zinc-Chro-SHIELD ® is a unique sealer for chromated zinc deposits which dramatically increases corrosion protection at very little additional cost. And since it's added to the final stagnant rinse at low concentrations (1% to 8% by volume), no additional equipment is required. Zinc-Chro-SHIELD... [See More]
- Type: Coating; Sealer
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Zinc; Water; Silicate Based
from Rust-Oleum Corporation
High heat resistance, two coat system for exterior heat exposure conditions [See More]
- Type: Coating; Paint; Base Coat
- Substrate: Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Metal Filled; Resin; Silicone; Zinc
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
Interior/exterior acrylic PMR coating in standard and custom colours. Dryvit ’s exterior coatings have been formulated to outperform traditional exterior paints. Based on high performance acrylic and silicone technologies these finishes are the ideal solution for refurbishment or new build. [See More]
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Wood; Other; Stucco and Acrylic-Based Textured Finishes
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
- Coating Material: Polyurethane; Resin; Aliphatic
from Columbia Chemical Corporation
COLDIP ® Satin Zinc 900 is a unique all "trivalent" chromate conversion coating for electroplated zinc that provides a uniform satin zinc finish, similar in appearance to satin nickel and satin silver. It is an easy-to-use one part system that provides 96 - 168 hours of neutral salt spray to... [See More]
- Type: Coating; Chromates for Zinc Plating
- Coating Material: Conversion; Zinc
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
- Form: Liquid
from Rust-Oleum Corporation
Clear, unpigmented, two component, zero VOC waterborne epoxy primer. [See More]
- Type: Coating; Primer; Sealer
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Type: Coating; Paint; Enamel; Primer; Base Coat; Clear Coat; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Alkyd; Resin
from Dryvit UK
A coating used over Dryvit finishes that gives a pearlescent (metallic) appearance. [See More]
- Type: Coating; Paint
- Coating Material: Resin
- Cure / Setting Technology: Film Drying
- Form: Liquid
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX PRIMER is a general purpose, interior/exterior, VOC compliant, 100% acrylic, low odor, waterborne primer. One component. Water clean up. Fast dry. RECOMMENDED USAGE. For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor... [See More]
- Type: Coating; Primer
- Coating Material: Acrylic; Resin; Water
- Substrate: Concrete; Wood
- Cure Temperature: 50 to 120
from Columbia Chemical Corporation
COLDIP ® TRI-V 120 is a high corrosion resistant "Trivalent Blue-Bright" chromate conversion coating for electroplated zinc, providing over 120 hours of neutral salt spray to white corrosion. It is approved by General Motors Worldwide under the GMW 3044 specification. [See More]
- Type: Coating; Chromates for Zinc Plating
- Coating Material: Conversion; Zinc
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
- Form: Liquid
from Rust-Oleum Corporation
Modified silicone aluminum & colored finishes, high heat exposed surfaces [See More]
- Type: Coating; Paint; Primer (optional feature); Clear Coat (optional feature)
- Substrate: Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Aluminum; Metal Filled; Resin; Silicone
from Sherwin-Williams
Sherwin-Williams is a global provider of protective and marine coatings, offering a complete line of high performance coatings technologies to combat corrosion. We deliver unmatched service and coatings specification support to meet our customers ’ coatings needs. [See More]
- Type: Coating
- Substrate: Metallic; Plastic; Wood
- Cure / Setting Technology: Film Drying
- Coating Material: Epoxy; Fluoropolymers; Formaldehyde Resins (Phenolic, Furan, Melamine); Resin
from Dryvit UK
Ready to use polymer modified cementitious renders, used to create a brick effect finish. [See More]
- Type: Coating; Paint
- Coating Material: Resin
- Cure / Setting Technology: Film Drying
- Form: Cement
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Type: Coating; Clear Coat
- Coating Material: Acrylic; Resin; Water
- Substrate: Concrete; Wood
- Cure Temperature: 55 to 100
from Columbia Chemical Corporation
COLDIP ® TRI-V 121 is a high performance "Trivalent Blue-Bright" chromate conversion coating for electroplated zinc, providing over 175 hours of neutral salt spray to white corrosion. It is approved by General Motors Worldwide under the GMW 3044 specification. [See More]
- Type: Coating; Chromates for Zinc Plating
- Coating Material: Conversion; Zinc
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
- Form: Liquid
from Rust-Oleum Corporation
15 oz Aerosol; Safety Blue; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Type: Coating; Paint; Enamel
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Operating Temperature: ? to 200
from Dryvit UK
Polymer modified cementitious render and acrylic stain used to create a wood effect finish. [See More]
- Type: Coating; Paint; Stain
- Coating Material: Resin
- Cure / Setting Technology: Film Drying
- Form: Cement
from Sherwin-Williams Protective & Marine Coatings
SherPlate PW Epoxy. SherPlate PW Epoxy is an edge retentive, ultra high solids epoxyamine coating engineered for immersion service in potable water pipes and storage tanks. The rapid return to service and high build, edge retentive properties of this coating provide superior protection. One or two... [See More]
- Type: Coating
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Epoxy; Resin