Side mount Level Switches
from Arjay Engineering
Reliable level alarm and control of liquids and solids. As a liquid or solid rises or lowers around the probe, the capacitance field changes. This is monitored and used to control the two on-board relays. Each relay includes full differential control to allow the relay to activate and de-activate... [See More]
- Mounting Options: Side mount; Top mount
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
- Media Type: Liquid; Dry material (Bulk solids and powders)
- Max Current Rating: 10
from Plast-O-Matic Valves, Inc.
Series LLS Liquid Level Switch with pivot pin design features SPST reed switch for 120/240 VAC 50 Watt power or optional DC dry circuit for computer/PLC interface. PVC or Noryl body. [See More]
- Mounting Options: Side mount; Top mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST); Single Pole, Double Throw (SPDT) (optional feature)
from BinMaster, Inc.
The Compact Pro is a compact capacitance probe designed for tight spaces. It is used for high or low level measurement and plugged chute detection for liquids, powders, granules, and pelleted materials. It is appropriate for use in tanks, bins, silos, chutes, conveyors, pipes, or load out hoppers. [See More]
- Mounting Options: Side mount
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
- Media Type: Liquid; Dry material (Bulk solids and powders)
- Max Current Rating: 5
from RS Components, Ltd.
Mobrey side mount level switch, SPST out [See More]
- Mounting Options: Side mount
- Text for Description of Other Pole and Throw: Spst
- Pole and Throw Specifications: Single Pole, Single Throw (SPST); Other Type (Special Application)
- Maximum Operating Pressure: 261
from Intellisense Microelectronics Ltd.
The optical liquid level switch consists of an infrared LED and a receiver. In air, the light beam from the infrared LED is reflected back into the receiver. When rising liquid touches the tip of the sensor, the light is refracted away from the device, causing little light to return to the receiver. [See More]
- Mounting Options: Side mount; Bottom mount
- Repeatability (Point Level): 0.0394
- Media Type: Liquid
- Accuracy (Continuous Level): 0.0394
from Fluid Components Intl. (FCI)
The FLT93C insertion and inline type FlexSwitches for sanitary flow, level and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product is specifically designed for sanitary 3A process applications. FCI is the only thermal... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT); Double Pole, Double Throw (DPDT) (optional feature)
from ABB Measurement & Analytics
The LMS200 consists of two snap action switches operated by a precision actuation mechanism. The actuation mechanism consists of two cams arranged on a spindle assembly. A rod magnet is internally mounted to a spindle assembly in such a way as to cause the spindle to rotate when a magnetic... [See More]
- Mounting Options: Side mount; Top mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from RS Components, Ltd.
Mobrey side mount level switch, SPST out [See More]
- Mounting Options: Side mount
- Text for Description of Other Pole and Throw: Spst
- Pole and Throw Specifications: Single Pole, Single Throw (SPST); Other Type (Special Application)
- Maximum Operating Pressure: 490
from Intellisense Microelectronics Ltd.
The LLS.DTM12 series optical liquid level switch is a low cost single point level sensor designed for semitransparent, clear, and low viscosity liquids. The sensor is available in Trogamid or Polysulfone. The Polysulfone version with high chemical resistance is suitable for most acids and bases. The... [See More]
- Mounting Options: Side mount; Bottom mount
- Repeatability (Point Level): 0.0394
- Media Type: Liquid
- Meter Technology Type: Optical
from Fluid Components Intl. (FCI)
The FLT93F insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT); Double Pole, Double Throw (DPDT) (optional feature)
from ABB Measurement & Analytics
FEATURES: Liquids and Bulk Solids. KSHIELD ™ Sensing Probes and Single Setpoint. Electronics that Provide Immunity to Buildup. Integral and Remote Electronics. Easy Set Up Via External Magnet or Pushbuttons. Housing with Glass Viewing Cover. Wide Variety of Sensing Probes to (450 ºF / 800... [See More]
- Mounting Options: Side mount; Top mount
- Max Current Rating: 10
- Media Type: Liquid
- Max AC Voltage Rating: 250
from RS Components, Ltd.
Gems Sensors 090-0027 Level Switch [See More]
- Mounting Options: Side mount
- Pole and Throw Specifications: Single Pole, Single Throw (SPST); Other Type (Special Application)
- Configuration (Normal State): Normally Open (NO)
- Text for Description of Other Pole and Throw: Spst no
from Intellisense Microelectronics Ltd.
The electro-optical level sensor is used to monitor the level of liquids. The model LLS.ELS1150 is an enhanced electro-optical level switch from IMS sensors. This series utilize IMS advanced photoelectric sensor ASICs to achieve a fast, stable, cost-effective sensor with no moving parts. Equipped... [See More]
- Mounting Options: Side mount; Bottom mount
- Repeatability (Point Level): 0.0394
- Media Type: Liquid
- Meter Technology Type: Optical
from Fluid Components Intl. (FCI)
The FLT93M insertion type FlexSwitch for multipoint level monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Repeatability (Point Level): 0.1250
- Media Type: Liquid
- Accuracy (Continuous Level): 0.2500
from ABB Measurement & Analytics
FEATURES: Liquids and Bulk Solids. Integral and Remote Electronics Available. Easy Set Up Via External Magnet or Pushbuttons. Housing with Glass Viewing Cover. Wide Variety of 2-Element Sensing Probes Available (450 ºF / 3000 psig). Field Selectable Modes of Operation: Single Set Point... [See More]
- Mounting Options: Side mount; Top mount
- Max Current Rating: 10
- Media Type: Liquid; Dry material (Bulk solids and powders)
- Max AC Voltage Rating: 250
from RS Components, Ltd.
Delta-Mobrey S01DB/F68/1 Level Switch [See More]
- Mounting Options: Side mount
- Pole and Throw Specifications: Single Pole, Single Throw (SPST); Other Type (Special Application)
- Media Type: Liquid
- Text for Description of Other Pole and Throw: Spst
from Fluid Components Intl. (FCI)
The FLT93S insertion type FlexSwitch for level and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT); Double Pole, Double Throw (DPDT) (optional feature)
from ABB Measurement & Analytics
Since the Level Indicated by the ST95 is More Visible than with a Conventional Gauge Glass, it is Easier to Monitor Seal Performance. The ST95 was Developed to Decrease Installation Costs for Customers that were Sourcing the Pots without Gauge Glasses from Seal Manufacturers and Adding gauge to the... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Material Temperature Range: 400
from RS Components, Ltd.
Delta-Mobrey S01DB/F68/4 Level Switch [See More]
- Mounting Options: Side mount
- Pole and Throw Specifications: Single Pole, Single Throw (SPST); Other Type (Special Application)
- Media Type: Liquid
- Text for Description of Other Pole and Throw: Spst
from ABB Measurement & Analytics
The resonant frequency is continuously monitored for changes created by a wet or dry sensor and an alarm is provided via relay. The RS85 should be used when the application requires optional process connections, exotic materials of construction, coatings, finishes or adjustable time delay and... [See More]
- Mounting Options: Side mount; Top mount
- Repeatability (Point Level): 0.1000
- Media Type: Liquid
- Max Current Rating: 8
from RS Components, Ltd.
Baumer LBFS-01421.0 Level Sensor [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Text for Description of Other Pole and Throw: Pnp
- Pole and Throw Specifications: Other Type (Special Application)
- Maximum Operating Pressure: 145
from RS Components, Ltd.
Baumer LBFS-03421.0 Level Sensor [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Text for Description of Other Pole and Throw: Pnp
- Pole and Throw Specifications: Other Type (Special Application)
- Maximum Operating Pressure: 1450
from RS Components, Ltd.
Baumer LBFH-21.010.A03020.1.4003.0 [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Text for Description of Other Pole and Throw: Pnp
- Pole and Throw Specifications: Other Type (Special Application)
- Maximum Operating Pressure: 145
from RS Components, Ltd.
Baumer LBFH-21.010.A03020.3.4003.0 [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Meter Technology Type: Other (Such as tilt etc.)
- Maximum Operating Pressure: 145
- Communication Interface Options: Other Interface Type
from RS Components, Ltd.
Siemens 7ML5725-1ZC11-1AD0 J1E [See More]
- Mounting Options: Side mount; Top mount
- Max DC Voltage Rating: 30
- Max AC Voltage Rating: 250
- Meter Technology Type: Other (Such as tilt etc.)
from RS Components, Ltd.
Rosemount 211002R2NA [See More]
- Mounting Options: Side mount; Top mount
- Text for Description of Other Pole and Throw: Direct load
- Pole and Throw Specifications: Other Type (Special Application)
- Max AC Voltage Rating: 264
from RS Components, Ltd.
Rosemount 211000A1NA [See More]
- Mounting Options: Side mount; Top mount
- Text for Description of Other Pole and Throw: Direct load
- Pole and Throw Specifications: Other Type (Special Application)
- Max AC Voltage Rating: 264
from RS Components, Ltd.
Rosemount 211001A1NA [See More]
- Mounting Options: Side mount; Top mount
- Text for Description of Other Pole and Throw: Direct load
- Pole and Throw Specifications: Other Type (Special Application)
- Max AC Voltage Rating: 264
from RS Components, Ltd.
Rosemount 2120D1AT1NAAA0000 [See More]
- Mounting Options: Side mount; Top mount
- Text for Description of Other Pole and Throw: Direct load
- Pole and Throw Specifications: Other Type (Special Application)
- Maximum Operating Pressure: 1450
from RS Components, Ltd.
Rosemount 2120D1AK1I1AA0000 [See More]
- Mounting Options: Side mount; Top mount
- Text for Description of Other Pole and Throw: Namur
- Pole and Throw Specifications: Other Type (Special Application)
- Maximum Operating Pressure: 1450
from RS Components, Ltd.
Rosemount 2120D1AT1E1XA0000 [See More]
- Mounting Options: Side mount; Top mount
- Text for Description of Other Pole and Throw: Direct load
- Pole and Throw Specifications: Other Type (Special Application)
- Maximum Operating Pressure: 1450
from KOBOLD Instruments, Inc.
The KOBOLD NNE Series float level switch for liquids provides mercury-free level switching for tank applications requiring high current capability. With such capacities, pumps may be directly controlled in many applications. The body of this float-type, heavy-duty, tilt level switch is constructed... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Whitman Controls, LLC
The Whitman Controls L54 Series Bent Stem Side Mount Stainless Steel Liquid Level Switches have 3/8 ” – 24 straight thread or 1/8 ” NPT thread fittings allowing for insertion into the sides of topless tanks and for vertical actuation. The stainless steel wetted material in addition... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 900
- Media Type: Liquid
- Material Temperature Range: -40 to 300
from SONOTEC Ultraschallsensorik Halle GmbH
The ultrasonic level switch SONOCONTROL 15 is designed to detect with speed and precision whether or not a tube is filled with liquid or liquefied gas. The compact sensor can be used for contactless measurement through the tube wall and is particularly suited to applications within the pharmacy and... [See More]
- Mounting Options: Side mount
- Switch Type: Solid-state switch
- Media Type: Liquid
- Max Current Rating: 0.0220
from Automation Products, Inc.
The Type CL-10DJ Dynatrol ® Level Switch is designed for application to either high or low point level detection of bulk solids. Reliable operation can be achieved with this level control in problem applications where other types of controls may fail to operate at all. Versatile: This control is... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Monitor Technologies LLC
Economical point level detection in bins and hoppers [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Closed (NC)
from Madison Company
The M7790 side-mounted liquid level switch has a PBT stem and a PBT float. PBT is a stong plastic that features excellent structural integrity. It is best used where temperature resistance and permeability are not factors such as fuel and hydraulic systems up to 120 degrees C. The M7790 is not for... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from OMEGA Engineering, Inc.
The OMEGA LVK-90 single station horizontal level switch is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. When the float arm is raised to the switch housing, the switch is activated. As the float... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Automation24, Inc.
Side mounting float switch M5910 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M5910 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. 316 stainless steel... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 20
from FPI Sensors International
Specifications: Stem Material: Stainless Steel. Float Material: Stainless Steel. Maximum Temperature (F): 300 F. PSI @ 70 Degrees F: 300 PSI. Minimum Liquid Specific Gravity: .65. Switch Max Wattage Rating at 250V: 50 Watt. Leads: 24" PFTE. Common Options: Lead Length and Color. Cable (to replace... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC) (optional feature)
from KTR Corporation
Product features. Oil-level indicators with and without temperature indication. Oil-level indicator with electronic level control indication. Electric control as opener (KOO) or as closer (KOS). All oil-level indicators only for operation without pressure (max. 0.4 bar). Tightening torque for... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from CIRCOR Energy
Pneumatic or electric switches are designed to attach directly to tanks or vessels. These switches have mechanical “paddles ” which float upwards as liquid levels rise. Once the paddle rises to a precise point, the switch is activated, sending a pneumatic or electric signal to the... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 2000
- Media Type: Liquid
- Material Temperature Range: -20 to 400
from Albér
The Alber ELS is a non-invasive level sensor designed to save you time and money!. ● Designed specifically to comply with the NERC PRC-005 requirements for electrolyte level inspection. ● Eliminate the required quarterly inspection of battery electrolyte levels. ● No alarm …... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from DME Company
ifm efector ® raises the bar in sensing plastics materials. For years, ifm capacitive level sensors have been a proven solution for applications on loaders, blenders and grinders in the plastics processing industry. Traditional capacitive sensors can detect high-density materials with... [See More]
- Mounting Options: Side mount
- Switch Type: Solid-state switch
- Media Type: Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Shanghai Yuanben Magnetoelectric Tech. Co., Ltd.
1.Description. LS level switch is consisting of a magnetic float, unit stem with magnetic reed switch, the magnetic float moves with liquid level to actuate a hermetically sealed magnetic switch within the unit stem. The level switches usually used for high or low alarm vessels. Since technologies... [See More]
- Mounting Options: Side mount
- Accuracy (Continuous Level): 0.1181
- Media Type: Liquid
- Max AC Voltage Rating: 250
from Clark Solutions
The FS00Z level switch consists of a polypropylene housing with an integrated watertight and position dependent electromechanical microswitch. The unit works according to the lift principle. The hollow float is raised (lowered) by the rising (falling) liquid until it reaches an angle of 45 °... [See More]
- Mounting Options: Side mount
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
- Media Type: Liquid
- Max Current Rating: 15
from Sitron
Sitron ’s HFS high frequency limit level sensor is designed to effortlessy detect the level of fluids or paste-like media while ignoring the influence of deposits of viscous media (ketchup, yogurt, pastes, syrups, jams and jellies, creams, soap) as well as products such as detergents, alkalis,... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Max Current Rating: 0.3000
- Media Type: Liquid
- Maximum Operating Pressure: 1450
from FineTek
The FF Series is a magnetic float level switch specifically designed for mounting on the side of a vessel where float orientation is horizontal. It is suitable for industrial use with a wide range of fluids where the float level switch will operate with fluid density as low as 0.25 S.G.. FFX Side... [See More]
- Mounting Options: Side mount; Top mount
- Meter Technology Type: Mechanical/magnetic Floats
- Media Type: Liquid
- Operating Temp: 662
from Solutions with Innovation, LLC
The compact L007/L007TT are a low-cost, side mounted level switches that can be mounted inside or outside the tank and are available in a wide variety of materials for most any service. The no-leak construction ensures safe installation in tanks of any size and they can be easily converted from... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Barksdale Control Products
Barksdale's UNS-PA/PP family of level solutions are ideal for applications requiring a side-mounted switch. With their compact design, they are suitable for use in small tanks and vessels, as well as larger tanks where top mounting is not an option. A choice of polyamid (nylon) or polypropylene... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from elobau U.S., Inc.
Broken finger switches with teflon hinge. Switching point with an inclination of α = 12 ° ±3 ° at the top of the switch, measured in the air – Note that the container walls must be at least 3 mm thick. [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Uehling Instrument Company
Float switches are used to trip high/low level alarms, engage relays, control or start/stop pumps, open/close valves etc. They are a simple, inexpensive way to provide independent or redundant setpoints for emergency shut-down or backup. [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Repeatability (Point Level): 0.0300
- Media Type: Liquid
- Switch Type: Electro-mechanical switch
from Gems Sensors & Controls
Internal Mounting. Stainless Steel Construction. Complies with FDA Food Contact Regulations. Built for durability, our LS-7 Series switches utilize stainless steel, or zinc bodies. Ideal for any small tank or vessel destined for a rugged environment. All-stainless steel material construction of Type... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. 2 Wire Interface. SS Sensor. No Moving Parts. Position Independent. Visible Switch Condition. User Selectable Switch Logic. Good to 270 °F. NEMA 4X. KOBOLD's NQ is a compact, ultrasonic level switch which activates when immersed in liquid. Its short intrusion length (1.42... [See More]
- Mounting Options: Side mount
- Switch Type: Solid-state switch
- Media Type: Liquid
- Max Current Rating: 0.5000
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted CPVC Plastic Liquid Level Switches are typically used in water and potable water applications. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI. [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 100
- Media Type: Liquid
- Material Temperature Range: -40 to 180
from Automation Products, Inc.
The Type CL-10DJ-7 Dynatrol ® Level Switch is designed for application to either high or low point level detection of bulk solids. Reliable operation can be achieved with this level control in problem applications where other types of controls may fail to operate at all. Versatile: This control... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Madison Company
The M9700 side-mounted liquid level switch has a Kynar stem and a Kynar float. Kynar has chemical and solvent resistant proprties and the high purity of the material make it an outstanding choice for food handling, medical and laboratory, and sensitive test equipment. [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from OMEGA Engineering, Inc.
The LVD-800 Series fail-safe bin monitor is the state-of-the-art in rotary paddle technology. Utilizing magnetic sensing technology and a unique housing design, the LVD-800 Series fail-safe bin monitor is the most reliable, technician-friendly, rugged and economical truly fail-safe rotary paddle... [See More]
- Mounting Options: Side mount; Top mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
from Automation24, Inc.
Side mounting float switch M5920 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M5920 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. 316 stainless steel... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 20
from FPI Sensors International
Specifications: Stem Material: Polypropylene. Float Material: Polypropylene. Maximum Temperature (F): 180 F. PSI @ 70 Degrees F: 100 PSI. Minimum Liquid Specific Gravity: .55. Switch Max Wattage Rating at 250V: 50 Watt. Leads: 24" PFTE [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC)
from Shanghai Yuanben Magnetoelectric Tech. Co., Ltd.
1.Description. LS level switch is consisting of a magnetic float, unit stem with magnetic reed switch, the magnetic float moves with liquid level to actuate a hermetically sealed magnetic switch within the unit stem. The level switches usually used for high or low alarm vessels. Since technologies... [See More]
- Mounting Options: Side mount
- Accuracy (Continuous Level): 0.1181
- Media Type: Liquid
- Max AC Voltage Rating: 250
from Clark Solutions
The L007 series horizontal mount level switches have a no-leak construction and are ideal for small tanks. The units side-wall mount internally or externally and offer a broad range of media compatibility due to the selection of construction materials. Model L007 operates on falling or rising level. [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
- Media Type: Liquid
- Max Current Rating: 1
from Solutions with Innovation, LLC
The horizontally mounted L070/L071 are rugged, hazardous duty level switches providing a safe, isolated switch closure for monitoring high and low liquid levels. With an all stainless steel construction and ultra-light float, the L070/L071 series provide high performance in most any media and can be... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from elobau U.S., Inc.
Broken finger switches with teflon hinge. Switching point with an inclination of α = 12 ° ±3 ° at the top of the switch, measured in the air. [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Gems Sensors & Controls
External Mounting. 7/8" - 14UNF Thread. SAE Mounting. Built for durability, our LS-7 Series switches utilize stainless steel, or zinc bodies. Ideal for any small tank or vessel destined for a rugged environment. Type 6 - Zinc alloy body with polypropylene or nylon float. SAE Mounting. [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. For All Types of Liquids. SPDT Reed Switch (Mercury-Free). Stainless Steel Wetted Construction. Maximum Temperature to 302 °F. Maximum Pressure to 220 PSIG. KOBOLD Series NSE float switches enable liquid levels to be monitored easily. Filling levels may also be controlled by... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 220
- Media Type: Liquid
- Material Temperature Range: 32 to 302
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted CPVC Plastic Liquid Level Switches are typically used in water and potable water applications. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI. [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 100
- Media Type: Liquid
- Material Temperature Range: -40 to 180
from Automation Products, Inc.
The Type CL-10DJI Dynatrol ® Interface Level Detector has the unique ability to detect the interface: Between a liquid and a settled bed of solids. Between a liquid and a floating bed of solids. Between liquid phases of significantly different viscosities. Advantages. Versatile: This control is... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid; Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Madison Company
The M5900 side-mounted liquid level switch has a stainless steel stem and a stainless steel float. Stainless steel stems and floats are well suited for corrosive environments as well as food processing, medical, heating, and cooling applications. This model is also available with extended stem... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from OMEGA Engineering, Inc.
OMEGA non-intrusive RF capacitance sensors deliver accurate and reliable liquid level detection with an SPST mechanical relay output. A versatile weld-on fitting enables the sensor to be mounted directly to the wall of any standard polyethylene, fiberglass or polypropylene tank. Simply align the... [See More]
- Mounting Options: Side mount
- Switch Type: Solid-state switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Automation24, Inc.
Side mounting float switch M5970 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M5970 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. Stainless body and... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from FPI Sensors International
Specifications: Stem Material: Stainless Steel. Float Material: Stainless Steel. Maximum Temperature (F): 300 F. PSI @ 70 Degrees F: 300 PSI. Minimum Liquid Specific Gravity: .8. Switch Max Wattage Rating at 250V: 50 Watt. Leads: 24" PFTE [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC)
from Shanghai Yuanben Magnetoelectric Tech. Co., Ltd.
1. Description. LS level switch is consisting of a magnetic float, unit stem with magnetic reed switch, the magnetic float moves with liquid level to actuate a hermetically sealed magnetic switch within the unit stem. The level switches usually used for high or low alarm vessels. Since technologies... [See More]
- Mounting Options: Side mount
- Accuracy (Continuous Level): 0.1181
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO)
from Clark Solutions
The U00X Series Solid-State Level Switches are reliable, low-cost liquid level controls for use in installations where mechanical float-type switches are impractical. U00X models are compatible with many liquids, regardless of the fluid's density or conductivity. The units require no calibration,... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
from Solutions with Innovation, LLC
The 'bent stem' L090 mounts less than 3 inches into the side of the tank and detects liquid levels with specific gravities as low as .45. It is available with stainless steel or Buna-N floats, brass or stainless stem mounts and a choice of 1/8" NPT or 3/8"-24 straight threads for installation in a... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from elobau U.S., Inc.
Broken finger switches with teflon hinge. Switching point with an inclination of α = 12 ° ±3 ° at the top of the switch, measured in the air. [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Gems Sensors & Controls
External Mounting. 1/2" NPT. Ideal for Small Tanks. Built for durability, our LS-7 Series switches utilize stainless steel, or zinc bodies. Ideal for any small tank or vessel destined for a rugged environment. Type 8 - Zinc alloy body with nylon or polypropylene float. [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. For All Types of Liquids. Mechanical Switch (Mercury-Free). Polypropylene Float Construction. Maximum Temperature to 140 °F. Maximum Pressure to 45 PSIG. KOBOLD Series NSM float switches enable liquid levels to be monitored easily and cost effectively. Filling levels may also... [See More]
- Mounting Options: Side mount
- Max Current Rating: 6
- Media Type: Liquid
- Max AC Voltage Rating: 400
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted Kynar Plastic Liquid Level Switches are typically used with solvents and certain bases. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI. These... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 100
- Media Type: Liquid
- Material Temperature Range: -40 to 180
from Automation Products, Inc.
The Dynatrol ® Type CL-10RH liquid level probe and 102B control switch are used for application to either high or low point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level detectors. [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Madison Company
The M5970 side-mounted liquid level switch has a stainless steel stem and a stainless steel float. Stainless steel stems and floats are well suited for corrosive environments as well as food processing, medical, heating, and cooling applications. This model is also available with extended stem... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from OMEGA Engineering, Inc.
The LV-1100 and 1200 level switches feature a nonmagnetic design suitable for applications where magnetic particles (i.e., rust) are present. The LV-1100 series also features rugged metal construction and a buoyancy adjustment to allow the unit to be used with fluids down to SG (specific gravity) =... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
from Automation24, Inc.
Side mounting float switch M7700 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M7700 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. PBT body and teflon... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from FPI Sensors International
Specifications: Stem Material: Polypropylene. Float Material: Polypropylene. Maximum Temperature (F): 180 F. PSI @ 70 Degrees F: 100 PSI. Minimum Liquid Specific Gravity: .55. Switch Max Wattage Rating at 250V: 50 Watt. Leads: 24" PFTE. Common Options: Lead Length and Color. Cable (to replace lead... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC)
from Shanghai Yuanben Magnetoelectric Tech. Co., Ltd.
1. Description. LS level switch is consisting of a magnetic float, unit stem with magnetic reed switch, the magnetic float moves with liquid level to actuate a hermetically sealed magnetic switch within the unit stem. The level switches usually used for high or low alarm vessels. Since technologies... [See More]
- Mounting Options: Side mount
- Accuracy (Continuous Level): 0.1181
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO)
from Solutions with Innovation, LLC
The VLI-2500A and the compact VLI-1250A provide safe durable and accurate direct tank level indication for most any industrial liquid or environment. [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Measuring Range: ? to 240
- Media Type: Liquid
- Switch Type: Electro-mechanical switch
from elobau U.S., Inc.
Broken finger switches with mechanical joint. Switching point with an inclination of α = 12 ° ±4 ° at the top of the switch, measured in the air [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Gems Sensors & Controls
External Mounting. Stainless Steel Construction. Complies with FDA Food Contact Regulations. Built for durability, our LS-7 Series switches utilize stainless steel, or zinc bodies. Ideal for any small tank or vessel destined for a rugged environment. All stainless steel material construction... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. For All Types of Liquids. SPDT Mechanical Switch (Mercury-Free). Rugged Polypropylene Construction. Maximum Temperature to 140 °F. Maximum Pressure to 30 PSIG. KOBOLD Series NSP float switches enable liquid levels to be monitored easily and cost effectively. Filling levels may... [See More]
- Mounting Options: Side mount
- Max Current Rating: 6
- Media Type: Liquid
- Max AC Voltage Rating: 400
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted Kynar Plastic Liquid Level Switches are typically used with solvents and certain bases. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and plastic body provides use up to 100 PSI. These... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 100
- Media Type: Liquid
- Material Temperature Range: -40 to 180
from Automation Products, Inc.
The Dynatrol ® GJ Detector is designed for application to either high or low point level detection of bulk solids. The GJ Detector is constructed to handle sensitive or problem applications that have a tendency to bridge or pack. This level detector operates successfully with consistent results... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Madison Company
The M8750 side-mounted liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating and metal cleaning. It is also a great option for lower temperature food operations (up to 105 degrees... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from OMEGA Engineering, Inc.
Compact, rugged and virtually maintenance free, the LVK-160 series can effectively meet the needs of large volume OEM users. The sensor is designed for side mounting into tanks that have restricted space or inaccessible tops or bottoms. Construction is polypropylene for compatibility with a wide... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Automation24, Inc.
Side mounting float switch M7750 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M7750 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. PBT body and teflon... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from Shanghai Yuanben Magnetoelectric Tech. Co., Ltd.
Applications. The float level switch is used for level monitoring and measuring of various liquids such as water, oil, diesel. Available with various choices of mountings, 3A and 5A level switches can be provided. In addition, the switch integrated with level and temperature control is also... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Accuracy (Continuous Level): 0.1181
- Media Type: Liquid
- Maximum Operating Pressure: 261
from Solutions with Innovation, LLC
VLIT-2500 combines a magnetically coupled local tank indicator with a separate transmitter that sends a current or voltage signal back to a PLC, network or remote controller. The transmitter can be easily calibrated in the field for different liquids and the indicator can be supplied in custom... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Measuring Range: ? to 240
- Media Type: Liquid
- Switch Type: Electro-mechanical switch
from elobau U.S., Inc.
Broken finger switches with mechanical joint. Switching point with an inclination of α = 12 ° ±4 ° at the top of the switch, measured in the air. [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Gems Sensors & Controls
Float Design Eliminates Problems Associated With Liming, Calcifying Applications. NSF and WRC Material Compliant. This compact Side Mount Level Switch is optimized for calcifying hot water applications. The Drop Float design keeps critical sensor elements out of the water thus eliminating liming or... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. For All Types of Chemically Aggressive Liquids. SPDT Reed Switch (Mercury-Free). All PTFE Construction. Maximum Temperature to 302 °F. Maximum Pressure to 15 PSIG. KOBOLD Series NST float switches enable liquid levels to be monitored easily. Filling levels may also be... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted Polypropylene Liquid Level Switches are among the most versatile and durable of the side-mounted liquid level switch line. The polypropylene wetted material makes the switch highly compatible with numerous liquids from acids, to water, to bases. The... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 100
- Media Type: Liquid
- Material Temperature Range: -40 to 180
from Automation Products, Inc.
The Dynatrol ® GS Level Sensor Switch is designed for application to either high, intermediate, or low-point level detection of bulk solids. The GS Level Sensor Switch is constructed to handle lightweight media applications that are difficult to measure or detect. Reliable operation can be... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Madison Company
The M8790 side-mounted liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating and metal cleaning. It is also a great option for lower temperature food operations (up to 105 degrees... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from OMEGA Engineering, Inc.
These liquid level switches are sealed with potting compound. The only path for liquid to the electrical switch would be through the wires. If the wires are terminated in an appropriate manner (eg. NEMA-6 connectors), the level switch will meet or exceed a NEMA-6 rating, making them suitable for... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Automation24, Inc.
Side mounting float switch M8700 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M8700 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. Polypropylene body and... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from elobau U.S., Inc.
Over the last three decades, innovation, reliability, and flexibility have become elobau hallmarks. Today, elobau is one of the leading manufacturers in the field of non-contact sensor technology. In addition to a broad and continually expanding array of standard products, elobau offers customized... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO) (optional feature); Normally Closed (NC) (optional feature)
from Gems Sensors & Controls
Ideal for Potable Water. Broad Chemical Compatibility. This compact Side Mount Level Switch is optimized for calcifying hot water applications. The Drop Float design keeps critical sensor elements out of the water thus eliminating liming or mineral deposit problems that can affect other level... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
The KOBOLD Level Switch model NSV excels in low density bulk media and is easy to maintain. It detects level via vibration technology. The vibrations are induced into a stainless steel fork by a piezoelectric crystal. When the media contacts the fork and dampens the vibration, it is detected and... [See More]
- Mounting Options: Side mount; Top mount
- Measuring Range: 118
- Media Type: Dry material (Bulk solids and powders)
- Switch Type: Electro-mechanical switch
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted Polypropylene Liquid Level Switches are among the most versatile and durable of the side-mounted liquid level switch line. The polypropylene wetted material makes the switch highly compatible with numerous liquids from acids, to water, to bases. The... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 100
- Media Type: Liquid
- Material Temperature Range: -40 to 180
from Automation Products, Inc.
The Dynatrol ® GSS Level Detector is designed for application to either high, intermediate, or low-point level detection of bulk solids. The GSS Level Detector is constructed to handle extremely light weight applications that are difficult to measure or detect a reading. Reliable operation can... [See More]
- Mounting Options: Side mount; Top mount; Bottom mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Madison Company
The M4010 side-mounted liquid level switch has a brass stem and a Buna-N float. Buna-N is typically suitable for use with aromatic hydrocarbons, diluted acids, and bases within a temperature range of -50 degrees C to 120 degrees C. Applications include fuel tanks, transmissions, and hydraulic... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from OMEGA Engineering, Inc.
Compact, rugged and virtually maintenance free, the LV-90 Series level switch can effectively meet the needs of large volume OEM users. The sensor is designed for side mounting into tanks that have restricted space or inaccessible tops or bottoms. Construction is all polysulfone (PSF) for... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Automation24, Inc.
Side mounting float switch M8710 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M8710 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. Polypropylene body and... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from elobau U.S., Inc.
Over the last three decades, innovation, reliability, and flexibility have become elobau hallmarks. Today, elobau is one of the leading manufacturers in the field of non-contact sensor technology. In addition to a broad and continually expanding array of standard products, elobau offers customized... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Gems Sensors & Controls
Nylon is Ideal for Oils and Fuels. NSF-Approved Polypropylene is Ideal for Potable Water and Broad Chemicals. Versaplast is ideal for corrosive fluids. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water,... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. Unique Single Probe Design Resists Fouling. Can Be Top or Side Mounted. Maximum Temperature to 320 °F. Maximum Pressure to 360 PSIG. Contact Parts - All 1.4571 SS. The NVI series vibrating level switch is an excellent choice for monitoring the level of powdered, granular or... [See More]
- Mounting Options: Side mount; Top mount
- Switch Type: Electro-mechanical switch
- Media Type: Dry material (Bulk solids and powders)
- Pole and Throw Specifications: Single Pole, Double Throw (SPDT)
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted Polypropylene Liquid Level Switches are among the most versatile and durable of the side-mounted liquid level switch line. The polypropylene wetted material makes the switch highly compatible with numerous liquids from acids, to water, to bases. The... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 100
- Media Type: Liquid
- Material Temperature Range: -40 to 180
from Madison Company
The M5010 side-mounted liquid level switch has a stainless steel stem and a stainless steel float. Stainless steel stems and floats are well suited for corrosive environments as well as food processing, medical, heating, and cooling applications. This model is also available with extended stem... [See More]
- Mounting Options: Side mount
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
- Media Type: Liquid
- Maximum Operating Pressure: 300
from Automation24, Inc.
Side mounting float switch M8750 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M8750 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. Polypropylene body and... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from elobau U.S., Inc.
Over the last three decades, innovation, reliability, and flexibility have become elobau hallmarks. Today, elobau is one of the leading manufacturers in the field of non-contact sensor technology. In addition to a broad and continually expanding array of standard products, elobau offers customized... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Closed (NC)
from Gems Sensors & Controls
Nylon is Ideal for Oils and Fuels. NSF-Approved Polypropylene is Ideal for Potable Water and Broad Chemicals. Versaplast is Ideal for Corrosive Fluids. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water,... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. All Plastic Construction. Tolerates Foaming, Turbulence and Coatings. Reliable Solid State Design. No Wear Components. NEMA 6 rating. KOBOLD's NWP level switch works on the vibrating fork principle. The tuning fork vibrates at a frequency of 400 Hz in air. When the fork becomes... [See More]
- Mounting Options: Side mount; Top mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from Whitman Controls, LLC
The Whitman Controls L20 / L25 Series Side Mounted 316L Stainless Steel Liquid Level Switches are commonly used in potable water, hot water, various acids, and in solvents. The side mount provides added versatility, allowing the switch to be used as a high or low level indicator, and stainless steel... [See More]
- Mounting Options: Side mount
- Maximum Operating Pressure: 500
- Media Type: Liquid
- Material Temperature Range: -40 to 300
from Madison Company
The M7740 side-mounted liquid level switch has a PBT stem and a PBT float. PBT is a stong plastic that features excellent structural integrity. It is best used where temperature resistance and permeability are not factors such as fuel and hydraulic systems up to 120 degrees C. The M7740 is not for... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from Automation24, Inc.
Side mounting float switch M8790-14/4184 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M8790-14/4184 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from Gems Sensors & Controls
NSF-Approved Polypropylene. Ideal for Potable Water and Broad Chemicals. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water, oils and chemicals. Type 7 - Polypropylene or Nylon; conduit connection. [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. Small and Compact. No Wear Components. Unaffected by External Vibrations. Works with Many Liquids. User Selectable Switch Logic. KOBOLD's NWS level switch works on the vibrating tuning-fork principle. A piezoelectric crystal is matched to the frequency of a tuning fork in air, and... [See More]
- Mounting Options: Side mount
- Switch Type: Solid-state switch
- Media Type: Dry material (Bulk solids and powders)
- Max Current Rating: 0.5000
from Madison Company
The M7700 side-mounted liquid level switch has a PBT stem and a PBT float. PBT is a stong plastic that features excellent structural integrity. It is best used where temperature resistance and permeability are not factors such as fuel and hydraulic systems up to 120 degrees C. The M7700 is not for... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from Automation24, Inc.
Side mounting float switch M9700 from Madison provides reliable single point detection of tank level via tried and true mechanical float switch actuation. The M9700 is also suited to a wide range of voltages from 0-240 V AC/DC and a current rating of 0.14 A at maximum voltage. Kynar body and teflon... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Maximum Operating Pressure: 6.9
from Gems Sensors & Controls
Nylon is Ideal for Oils and Fuels. NSF-Approved Polypropylene is Ideal for Potable Water. These low-cost units are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers broad compatibility in water, oils and chemicals. Type 10 - Externally mounts through and... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from KOBOLD Instruments, Inc.
Product Features. No Moving Parts. Low Hysteresis. Fast Response. Wide Applicability. KOBOLD's OPT level switch is well suited to act as a level limit detector for various process liquids. Its small geometry ensures a very low switching hysteresis of merely ±1 mm. Our optical design is free... [See More]
- Mounting Options: Side mount; Top mount
- Repeatability (Point Level): 0.0394
- Media Type: Liquid
- Maximum Operating Pressure: 145
from Madison Company
The M8700 side-mounted liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating and metal cleaning. It is also a great option for lower temperature food operations (up to 105 degrees... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
from KOBOLD Instruments, Inc.
The KOBOLD RFS level switch is a cost-effective liquid level switch for mounting in the side walls of tanks. The RFS Series level switch is constructed in stainless steel for maximum media compatibility. The straightforward design is distinguished by a small footprint, sturdy construction, and a... [See More]
- Mounting Options: Side mount
- Switch Type: Electro-mechanical switch
- Media Type: Liquid
- Configuration (Normal State): Normally Open (NO); Normally Closed (NC)
from Madison Company
The M3827-1 side-mounted liquid level switch has a stainless steel stem and a stainless steel float. This side-mounted switch uses a vertical float that with a bent stem suited for tank-side mounting. Stainless steel stems and floats are well suited for corrosive environments as well as food... [See More]
- Mounting Options: Side mount
- Configuration (Normal State): Normally Closed (NC)
- Media Type: Liquid
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)