English DC Motors
from ElectroCraft
Our ElectroCraft RapidPowerTM Nema 17 is a small-sized, high-performance and high-speed brushless BLDC motor with ball-bearing construction, dynamically balanced rotors, and low audible and magnetic noise. It does not include brushes or a commutator. It is compatible with all three-phase brushless... [See More]
- Units: English; Metric
- DC Voltage Range: 60.0
- Commutation: Brushless
- Torque Constant: 31.1
from DigiKey
Brushed DC Motor Servomotor 8400 RPM 4.65W Incremental 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Commutation: Brush
- DC Voltage Range: 12.0
from ElectroCraft
Our ElectroCraft RapidPowerTM Nema 23 is a high-performance, high-speed brushless BLDC motor with ball-bearing construction, dynamically balanced rotors, and low audible and magnetic noise. It does not include brushes or a commutator. It is compatible with all three-phase brushless DC BLDC motor... [See More]
- Units: English; Metric
- Standard DC Voltage: 160V
- Commutation: Brushless
- DC Voltage Range: 160.0
from DigiKey
DC Motor Standard 135 RPM 1.5W 6VDC [See More]
- Units: English
- Output Power: 0.0020
- DC Voltage Range: 6.0
- Continuous Torque: 1.3
from ElectroCraft
Our ElectroCraft RapidPowerTM Nema 34 is a compact, high-performance brushless BLDC motor incorporating ball bearing construction, a low cogging electro-magnetic design with both low audible and magnetic noise. It is available with a hall-effect commutation encoder or a variety of optical encoders... [See More]
- Units: English; Metric
- Standard DC Voltage: 160V
- Commutation: Brushless
- DC Voltage Range: 160.0
from DigiKey
Continuous Rotation DC Motor Servomotor, RC (Hobby) 82 RPM 4.8 ~ 6VDC [See More]
- Units: English
- Continuous Torque: 1.1
- DC Voltage Range: 4.8 to 6.0
- Shaft Speed: 82
from ElectroCraft
Exquisitely efficient small form factor BLDC motor that has peak operating efficiency at traditional RPM ranges, allowing custom integration with a planetary gearbox. High torque from a small form factor, with low power consumption and peak performance at lower RPM for quiet operation. Traditional... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V; 48V
- Commutation: Brushless
- DC Voltage Range: 12.0 to 48.0
from DigiKey
GEARMOTOR 230 RPM 6VDC [See More]
- Units: English
- DC Voltage Range: 6.0
- Commutation: Brush
- Continuous Torque: 0.7
from ElectroCraft
Exquisitely efficient small form factor BLDC motor that has peak operating efficiency at traditional RPM ranges, allowing custom integration with a planetary gearbox. High torque from a small form factor, with low power consumption and peak performance at lower RPM for quiet operation. Traditional... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V; 48V
- Commutation: Brushless
- DC Voltage Range: 12.0 to 48.0
from DigiKey
MOTOR 35000 RPM 3.7VDC [See More]
- Units: English
- DC Voltage Range: 3.7
- Commutation: Brush
- Shaft Speed: 35000
from ElectroCraft
Exquisitely efficient small form factor BLDC motor that has peak operating efficiency at low RPM allowing custom integration with planetary gearbox. High torque from a small form factor, with low power consumption and peak performance at low RPM for quiet operation. Traditional BLDC motors have peak... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V; 48V
- Commutation: Brushless
- DC Voltage Range: 12.0 to 48.0
from DigiKey
MOTOR 1000 RPM [See More]
- Units: English
- Shaft Speed: 1000
- Commutation: Brushless
from ElectroCraft
The Hansen series 116-1 permanent magnet DC brush motor is available to serve the industrial, instrumentation and automotive markets in either open-loop or close-loop applications. Rotor laminations are skewed to provide very low cogging torque and no preferred rotor position. Standard catalog stall... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V
- Commutation: Brush
- DC Voltage Range: 12.0 to 24.0
from DigiKey
SERVOMOTOR, RC 82 RPM 4.8-6VDC [See More]
- Units: English
- Continuous Torque: 1.1
- DC Voltage Range: 4.8 to 6.0
- Shaft Speed: 82
from ElectroCraft
Our ElectroCraft DirectPowerTM Plus 240 Series features up a rugged, heavy-gauge steel housing construction for long-life and durability. This high-efficiency motor includes dynamically balanced armatures, sealed ball bearings, and replaceable brushes. Size: 2.25-inch or 57mm. Peak Torque: to 240... [See More]
- Units: English; Metric
- DC Construction: Disc Armature
- Commutation: Brush
- DC Voltage Range: 60.0
from DigiKey
SERVOMOTOR RC 54 RPM 4.8-7VDC [See More]
- Units: English
- Continuous Torque: 5.2
- DC Voltage Range: 4.8 to 7.0
- Shaft Speed: 54
from ElectroCraft
Our ElectroCraft DirectPowerTM Plus 640 Series features a rugged, heavy-gauge steel housing construction for long-life and durability. This high-efficiency motor includes dynamically balanced armatures, sealed ball bearings, and replaceable brushes. Size: 4.1 inches or 106 mm. Peak Torque: to 240... [See More]
- Units: English; Metric
- DC Construction: Disc Armature
- Commutation: Brush
- DC Voltage Range: 60.0
from DigiKey
DC GEAR MOTOR - 430RPM (3-6V) [See More]
- Units: English
- DC Voltage Range: 3.0 to 6.0
- Commutation: Brush
- Continuous Torque: 0.0
from ElectroCraft
Our ElectroCraft DirectPowerTM Plus 680 Series features a rugged, heavy-gauge steel housing construction for long-life and durability. This high-efficiency motor includes dynamically balanced armatures, sealed ball bearings, and replaceable brushes. Size: 3.25-inch or 82.5mm. Peak Torque: to 1100... [See More]
- Units: English; Metric
- DC Construction: Disc Armature
- Commutation: Brush
- DC Voltage Range: 60.0
from DigiKey
Positional Rotation DC Motor Servomotor, RC (Hobby) 5VDC [See More]
- Units: English
- Continuous Torque: 1.4
- DC Voltage Range: 5.0
- Operating Temperature: -22 to 140
from ElectroCraft
High-Torque. Long life. Our ElectroCraft DirectPower ™ Plus 700 Series features a rugged, heavy-gauge steel housing construction for long-life and durability. This series offers high output for low to mid voltages, high torque applications. This high-efficiency motor includes dynamically... [See More]
- Units: English; Metric
- DC Construction: Disc Armature
- Commutation: Brush
- Standard DC Voltage: 90V
from DigiKey
Positional Rotation DC Motor Servomotor, RC (Hobby) 5VDC [See More]
- Units: English
- Continuous Torque: 8.8
- DC Voltage Range: 5.0
from ElectroCraft
High-Torque. Long life. Our ElectroCraft DirectPower ™ Plus 720 Series features a rugged, heavy-gauge steel housing construction for long-life and durability. This high-efficiency motor offers smooth and highly accurate performance across the operating speed range. It includes dynamically... [See More]
- Units: English; Metric
- DC Construction: Disc Armature
- Commutation: Brush
- DC Voltage Range: 120.0
from DigiKey
Positional Rotation DC Motor Servomotor, RC (Hobby) 5VDC [See More]
- Units: English
- Continuous Torque: 1.9
- DC Voltage Range: 5.0
from ElectroCraft
The Synchron model 148-5 is a permanent magnet DC motor mounted on our Synchron C mount gearbox. Hundreds of gear ratios are available ranging from 1.3:1 up to 6,000,000:1 with a maximum torque rating on most gearheads of 30 oz-in. For overload torque protection the gearheads may be selected with... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 12V; 24V
from DigiKey
DC Motor Servomotor, RC (Hobby) [See More]
- Units: English
- Continuous Torque: 5.6
from ElectroCraft
The Synchron model 148-6 is a permanent magnet DC motor mounted to our round Synchron gearbox. Dozens of gear ratios are available ranging from 1.3:1 up to 720:1 with a maximum torque rating on most gearheads of 30 oz-in. For overload torque protection the gearheads may be selected with two-way slip... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 12V; 24V
from DigiKey
DC Motor Servomotor, RC (Hobby) [See More]
- Units: English
- Continuous Torque: 1.4
from ElectroCraft
ElectroCraft's MP24 integrates a 4-pole Brushless DC motor with a 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. The MP24 combines optimum performance with increased efficiency,... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brushless
- Standard DC Voltage: 48V
from DigiKey
Positional Rotation DC Motor Servomotor, RC (Hobby) 6VDC [See More]
- Units: English
- Continuous Torque: 1.6
- DC Voltage Range: 6.0
from ElectroCraft
ElectroCraft's MP26 integrates a 4-pole PMDC brush motor with a 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. ElectroCraft MobilePower ™ gearmotors feature an integrated... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 48V
from DigiKey
Positional Rotation DC Motor Servomotor, RC (Hobby) 4.8VDC [See More]
- Units: English
- Continuous Torque: 0.5
- DC Voltage Range: 4.8
from ElectroCraft
The Hansen series 116-8 gear motor matches our 1.6" diameter DC brush motor with a metal planetary gearbox. This is an ideal motor for medical applications where strong, coordinated, accurate motion control is required. The planet gears share the load attached to the output shaft giving the... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 24V
from DigiKey
Positional Rotation DC Motor Servomotor, RC (Hobby) 6VDC [See More]
- Units: English
- Continuous Torque: 3.1
- DC Voltage Range: 6.0
from ElectroCraft
The Hansen series 116-9 gear motor matches our 1.6" diameter DC brush motor with a plastic planetary gearbox. The motor is ideal for medical applications where strong, coordinated, accurate motion control is required. The planet gears share the load attached to the output shaft giving the planetary... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 24V
from DigiKey
DC Motor Standard 9100 RPM 6VDC [See More]
- Units: English
- Continuous Torque: 0.0
- DC Voltage Range: 6.0
- Shaft Speed: 9100
from ElectroCraft
The Hansen series 121-8 gear motor matches our 2.1" diameter DC brush motor with a 2" diameter metal planetary gearbox. The planet gears share the load attached to the output shaft giving the planetary arrangement a higher torque to volume ratio with low backlash compared to a spur gear arrangement. [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 24V
from DigiKey
DC Motor Vibration, ERM 11000 RPM 5VDC [See More]
- Units: English
- Shaft Speed: 11000
- DC Voltage Range: 5.0
from ElectroCraft
The Hansen series 121-9 gear motor matches our 2.1" diameter DC brush motor with a 2" diameter plastic planetary gearbox. The planet gears share the load attached to the output shaft giving the planetary arrangement a higher torque to volume ratio with low backlash compared to a spur gear... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 24V
from DigiKey
Continuous Rotation DC Motor Servomotor, RC (Hobby) 5VDC [See More]
- Units: English
- Continuous Torque: 2.8
- DC Voltage Range: 5.0
from ElectroCraft
ElectroCraft's MPP24 integrates a 4-pole Brushless DC motor with a very robust 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. The MPP24 combines optimum performance with... [See More]
- Units: English
- Standard DC Voltage: 48V
- Commutation: Brushless
- DC Voltage Range: 48.0
from DigiKey
Continuous Rotation DC Motor Servomotor, RC (Hobby) 130 RPM 5VDC [See More]
- Units: English
- Continuous Torque: 1.3
- DC Voltage Range: 5.0
- Shaft Speed: 130
from ElectroCraft
ElectroCraft's MPP26 integrates a 4-pole PMDC brush motor with a very robust 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. ElectroCraft MobilePower ™ gearmotors feature an... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 48V
from DigiKey
Positional Rotation DC Motor Servomotor, RC (Hobby) 5VDC [See More]
- Units: English
- DC Voltage Range: 5.0
from ElectroCraft
Hansen offers an inexpensive, 1.4" diameter DC brush motor on our 2" diameter spur gearbox. This motor is offered in voltages up to 24 volts DC along with several optional features. 4 ratios are offered, 12:1, 48:1, 192:1 and 768:1. The 2" gearbox motor life is rated at 1000 hours continuous duty... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 24V
from DigiKey
DC Motor Standard 130 RPM 5VDC [See More]
- Units: English
- Continuous Torque: 1.3
- DC Voltage Range: 5.0
- Shaft Speed: 130
from ElectroCraft
Hansen offers our 1.6" diameter DC brush motor on a 2" diameter spur gearbox. This motor is offered in a wide range of operating voltages along with several optional features. Optional features offered include encoders, voltages, noise suppressors, custom shafting, custom leads and terminations,... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 24V
from DigiKey
Continuous Rotation DC Motor Servomotor, RC (Hobby) 120 RPM Absolute 6VDC [See More]
- Units: English
- Continuous Torque: 1.9
- DC Voltage Range: 6.0
- Shaft Speed: 120
from ElectroCraft
Hansen offers our 2.1" diameter DC brush motor on our 2" diameter spur gearbox. This motor package is offered in a wide range of operating voltages and with 4 gear ratio options, 12:1, 48:1, 192:1 and 768:1. Optional features include encoders, noise suppressors, custom shafts, custom leads and... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 24V
from DigiKey
Brushed DC Motor Gearmotor 200 RPM 3 ~ 6VDC [See More]
- Units: English
- DC Voltage Range: 3.0 to 6.0
- Commutation: Brush
- Continuous Torque: 5.3
from OMEGA Engineering, Inc.
OMPM-DC Series permanent magnet DC motors are designed for long motor life with permanently lubricated ball bearings and are TEFC (totally enclosed fan cooled) or TENV (totally enclosed nonventilated). All OMPM-DC motors are constructed from heavy duty gauge steel including frames, endbells,... [See More]
- Units: English; Metric
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 12V; 24V; 48V; 72V; 90V; 160V
from Island Components Group
Our brushless motors are among the most advanced in our industry. DC brushless motors offer superior performance and have the advantage of reduced maintenance since there are no brushes or commutators. These motors provide solutions for rigorous applications requiring maximum performance and... [See More]
- Units: English
- DC Voltage Range: 28.0
- Commutation: Brushless
- Torque Constant: 4.38
from Boston Gear
Overview. Boston Gear offers a wide range of ODP (open drip proof) AC motors, including brake motors. These motors are offered in C-Face models for mounting to our enclosed gear drives, and they are available in 1/6 - 20 HP and cover voltage ranges from 115 VAC to 460 VAC. These motors are ideally... [See More]
- Units: English
- Standard DC Voltage: 90V; 160V
- DC Construction: Permanent Magnet; Shunt Wound
- DC Voltage Range: 90.0 to 180.0
from Aerotech, Inc.
Design Features. Slotless, brushless ring motors with high torque output and zero cogging. Frameless design for easy integration into OEM machines. Various winding options available. Includes Hall effect sensors for commutation [See More]
- Units: English; Metric
- DC Construction: Permanent Magnet; Coreless / Slotless
- Commutation: Brushless
- Standard DC Voltage: 160V
from Anaheim Automation, Inc.
Long life brushless motor, quality and reliability, low cost [See More]
- Units: English
- Torque Constant: 1.94
- Commutation: Brushless
- Shaft Speed: 8000
from Autotrol Corporation
The 200 motor is a permanent magnet gearmotor utilizing a cylindrical barium ferrite 2 pole field magnet. A three bar commutator and a choice of carbon brushes or bifurcated silver alloy brushes provide long life, quiet operation and low starting voltage. The three slot rotor is supported by... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 6V
from Wolong Electric Industrial Motors
GE ’s general-purpose DC motors are available in commercial and industrial offerings. They are designed for complete compatibility with industrial DC drive applications. Motors are available in drip proof and totally enclosed enclosures. These motors are used for conveyors, textile machines,... [See More]
- Units: English
- Standard DC Voltage: 90V; 160V
- DC Construction: Permanent Magnet (optional feature); Shunt Wound (optional feature)
- DC Voltage Range: 90.0 to 500.0
from Venture Mfg. Co.
Venture ’s 8500 series motor gearbox has been an industry standard for years. Our standard unit is available in three gear ratios – 18:1, 28:1 and 58:1 and with a multitude of options, we ’re sure to have one that meets your needs …. Features: 20% Duty Cycle typical (1on/4... [See More]
- Units: English
- Gearbox Ratio: 18 to 58
- Gear Type: Spur (optional feature)
- Shaft Orientation: Offset / Parallel
from DOGA, S.A.
DOGA DC Motors and Gear Motors are developed with optimal adaptation capabilities so that each motor can be customized for the client. As part of its main mission to offer custom Design Motors and Gear Motors already for very low production volumes, DOGA is able to provide a wide range of customized... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 12V
from Dart Controls, Inc.
The advantages of DC adjustable speed drives with PM motors for low horsepower applications are: higher starting torque, wider usable speed and torque range, simpler dynamic braking, lower system cost, faster response, smaller size, more efficient and reliable. Standard features include: permanent... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 90V
from ARC Systems, Inc.
Brushless DC motors are ideal for various applications such as: Pump, Medical, Aerospace, and Industrial. ARC Systems, Inc. uses high energy materials including Neodymium- Iron-Boron, Samarium Cobalt, and Hyperco 50, enabling us to meet and exceed the rigid performance requirements of our customers. [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brushless
- DC Voltage Range: 28.0
from Koford Engineering, LLC
bull; High performance slotless brushless motors for military, aerospace, medical/den-tal, electric power tools, and industrial applications. •Medium and long lengths available. •Speeds up 200,000 rpm. • Autoclavable versions for surgical/dental applications. • Vacuum versions... [See More]
- Units: English
- DC Voltage Range: 12.0 to 48.0
- Standard DC Voltage: 12V; 24V; 48V
- Gear Type: Planetary
from M.H. Rhodes/Cramer Company
The Cramer line of DC Permanent Magnet Motors offers application solutions requiring fast starts, high starting torque and drive reversibility. Warning lights. Graphic plotters. Automatic teller machines. Printers. Medical pump and drive valves. Transit ticket dispensers. Card readers [See More]
- Units: English
- Standard DC Voltage: 6V; 9V; 12V; 24V
- DC Construction: Permanent Magnet
- DC Voltage Range: 6.0 to 24.0
from Kollmorgen Corporation
These permanent magnet DC (PMDC) motors are SCR-rated and adhere to NEMA standards. They are available in a variety of DC voltages, from 1/4 to 3/4 HP. Features. 1/4 to 3/4 HP, 90 volt, 1750 rpm. 1/4 to 3/4 HP, 180 volt, 1750 rpm. 1/3 HP, 12 volt, 1750 rpm. 1/3 to 3/4 HP, 24 volt, 1750 rpm. Patented... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 12V; 24V; 48V; 72V; 90V; 160V
from Groschopp, Inc.
Groschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. Steel housing with powder coating. High efficiency synthetic oil lubricant. Ball bearing construction. Industry-wide compatibility. Low noise, long life. 12-inch standard... [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0646
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.1
from Aerotech, Inc.
Design Features. Industry-standard NEMA 23, 34, and 42 frame sizes for ease of installation. Torque of 0.27 to 7.42 N ·m (38 to 1050 oz ·in) covers virtually any application requirement. Standard 200 full step (1.8 degree/step) design is ideal for microstepping to 50,000... [See More]
- Units: English; Metric
- Standard DC Voltage: 48V; 72V
- DC Construction: Permanent Magnet
- DC Voltage Range: 40.0 to 80.0
from Autotrol Corporation
The 250 motor is a permanent magnet gearmotor utilizing a cylindrical barium ferrite 2 pole field magnet. Carbon brushes provide long life, quiet operation and low starting voltage. The rotor is supported by permanently lubricated sintered bronze bearings. The 250 motor is availble in a wide range... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 12V
from Wolong Electric Industrial Motors
GE has been designing and building DC machines for over 100 years. We can offer new designs and re-rates up to 12,000 HP. Features and Benefits. This low base speed, high torque motor is used in high performance, automatic control systems that require a fast transient response. These motors are... [See More]
- Units: English
- Output Power: 5 HP / 3.6 KW
- DC Construction: Shunt Wound (optional feature); Series Wound (optional feature); Compound Wound (optional feature)
- Output Power: 5 to 250
from Venture Mfg. Co.
This versatile, motorized standard duty combination worm drive and spur gear driven gearbox can be produced with a variety of output shaft configurations and is also available with manual crank capabilities. Features: 20% Duty Cycle typical (1on/4 off). 12, 24, 36, 90 and 120vdc. Manual crank. Metal... [See More]
- Units: English
- Continuous Torque: 324.0
- Continuous Current: 30
- Gear Type: Spur; Worm
from Koford Engineering, LLC
4 pole ultra high performance, rugged, slotless design provides unmatched power density,high con-tinuous and peak torque and is cog free. Available with optical encoders and gearheads (contact factory). 240 °C rated ML wire and 205 °C rated thermosetting thermally conductive resin are used... [See More]
- Units: English
- DC Voltage Range: 12.0 to 24.0
- Standard DC Voltage: 12V; 24V
- Gear Type: Planetary
from Kollmorgen Corporation
Kollmorgen ’s permanent magnet DC motors offer rugged, quality construction and dependable operation. The PMDC motor design is based on the use of permanent magnets in place of a wound field design thus enabling a lighter, more compact and efficient motor with a wider speed range and an... [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 90V; 160V
from Groschopp, Inc.
Groschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. Steel housing with powder coating. High efficiency synthetic oil lubricant. Ball bearing construction. Industry-wide compatibility. Low noise, long life. 12-inch standard... [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.1442
from H2W Technologies
Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. The result is a... [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Output Power: 1/4 HP
from Venture Mfg. Co.
This versatile, medium duty, worm drive, right angle drive gearbox is commonly used in RV slide out systems, but can also be used in many other applications, maybe it will fit into one of yours. Features: 12 vdc. 20% Duty Cycle typical (1on/4 off). Manual crank. Metal Gears. Lifetime lubrication. [See More]
- Units: English
- Continuous Torque: 1000.0
- Continuous Current: 5 to 30
- Gear Type: Worm
from Koford Engineering, LLC
4 pole ultra high performance, rugged, slotless design provides unmatched power density,high continuous and peak torque and is cog free. Available with optical encoders and gearheads. 240 °C rated ML wire and 205 °C rated thermosetting thermally conductive resin are used for the windings for... [See More]
- Units: English
- DC Voltage Range: 24.0 to 48.0
- Standard DC Voltage: 24V; 48V
- Gear Type: Planetary
from Kollmorgen Corporation
These permanent magnet DC (PMDC) motors are SCR-rated and adhere to NEMA standards. They are available 90 or 180 VDC, from 1/4 to 2 HP. Features. Washdown duty, SCR-rated, NEMA standards. 1/4 to 1 HP, 90 volt, 1750 rpm. 1/2 to 2 HP, 180 volt, 1750 rpm [See More]
- Units: English
- DC Construction: Permanent Magnet
- Commutation: Brush
- Standard DC Voltage: 90V; 160V
from Groschopp, Inc.
Groschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. Steel housing with powder coating. High efficiency synthetic oil lubricant. Ball bearing construction. Industry-wide compatibility. Low noise, long life. 12-inch standard... [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.1352
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.2
from Venture Mfg. Co.
This versatile, heavy duty combination worm drive and spur gear driven gearbox can be used for virtually any application imaginable where strength and reliability are needed.. Features: 12 vdc. 20% Duty Cycle typical (1on/4 off). Manual crank. Metal Gears. Lifetime lubrication. Cast aluminum... [See More]
- Units: English
- Continuous Torque: 960.0
- Continuous Current: 30
- Gear Type: Spur; Worm
from Koford Engineering, LLC
4 pole ultra high performance, rugged, slotless design provides unmatched power density,high continuous and peak torque and is cog free. 240 °C rated ML wire and 205 °C rated thermosetting thermally conductive resin are used for the windings for the ultimate in ruggedness. Available in hall... [See More]
- Units: English
- DC Voltage Range: 24.0 to 48.0
- Standard DC Voltage: 24V; 48V
- Gear Type: Planetary
from Groschopp, Inc.
Groschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. Steel housing with powder coating. High efficiency synthetic oil lubricant. Ball bearing construction. Industry-wide compatibility. Low noise, long life. 12-inch standard... [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.1709
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Torque Constant: 4
from Venture Mfg. Co.
The M-9000 motor gearbox is available with or without a switch and wire harness. It is used to power most landing gear systems and can easily be added if a motor did not come as OEM equipment. For heavy coaches or to add the ability to level, Dual motors can be added to virtually any system. [See More]
- Units: English
- Continuous Torque: 150.0
- Continuous Current: 25 to 30
- Shaft Orientation: Offset / Parallel
from Koford Engineering, LLC
High performance design uses special low loss lamination material. Four pole design is optimum for positioning applications using hall signals for speed feedback because it offers twice the resolution, as well as increased power and speed compared to two pole motors. Slotless design is cog free for... [See More]
- Units: English
- DC Voltage Range: 12.0 to 24.0
- Standard DC Voltage: 12V; 24V
- Gear Type: Planetary
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Standard DC Voltage: 24V
- Commutation: Brushless
- DC Voltage Range: 24.0
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.6
from Venture Mfg. Co.
Venture ’s very versatile 890 Series actuators combine our standard 8500 series DC motor gearbox with a right angle worm drive gearbox providing a rugged and reliable motorized gearbox typically used with the above floor rack and pinion style slide out system. It is available in a large... [See More]
- Units: English
- Gearbox Ratio: 18 to 58
- Gear Type: Spur (optional feature); Worm
- Shaft Size: 0.625
from Koford Engineering, LLC
High power density high efficiency slotless design is cog free, cost effective, quiet, and provides high efficiency and cool operation. ML insulation is used for the greatest possible durability. 200 °C Neo magnets are used along with hard-ened and ground 440C stainless shaft, and high temp TFE... [See More]
- Units: English
- DC Voltage Range: 12.0 to 48.0
- Standard DC Voltage: 12V; 24V; 48V
- Gear Type: Planetary
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 163.0
- Commutation: Brushless
- Output Power: 0.0966
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 16.6
from Koford Engineering, LLC
Slotless design is cog free, and provides high efficiency and cool operation at high speed. Large bear-ings for long life.150 °C rated Neo rare earth magnets standard. Available with 120 ° hall sensors or sensorless. Hall sensors recomended for positioning or where a significant inertial... [See More]
- Units: English
- DC Voltage Range: 16.0 to 24.0
- Standard DC Voltage: 24V
- Gear Type: Planetary
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0134
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.6
from Koford Engineering, LLC
Cog free, slotless, low inductance design for highest performance, perfect for direct drive applications and other precision servo applications. ML insulation is used for the greatest possible durability. 150 °C Neo magnets are used along with stainless shaft, and high temp TFE insulated lead... [See More]
- Units: English
- DC Voltage Range: 24.0 to 48.0
- Standard DC Voltage: 24V; 48V
- Gear Type: Planetary
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0179
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 2.4
from Koford Engineering, LLC
Slotless design is cog free, and provides very smooth rotation and very low heat rise to avoid affecting temperature sensitive components in scientific instruments and other de-vices. Typically these motors are used to rotate optics, filters, and mirrors mounted onto the end of the motor shaft. They... [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Gear Type: Planetary
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0533
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 27.4
from Koford Engineering, LLC
Neo rare earth magnets standard for high performance. Electrographite brushes for longmotor life at high speeds. Available with EMI filters. Compact and cost efficient designmakes it suitable for a variety of applications such as medical/dental handpieces, intermittentduty pumps, lab mixers... [See More]
- Units: English
- DC Voltage Range: 12.0 to 30.0
- Standard DC Voltage: 12V; 24V
- Gear Type: Planetary
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Turned, heat-treated and ground shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Standard DC Voltage: 24V
- Commutation: Brushless
- DC Voltage Range: 24.0
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 54.7
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Turned, heat-treated and ground shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Standard DC Voltage: 24V
- Commutation: Brushless
- DC Voltage Range: 24.0
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.3
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Turned, heat-treated and ground shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Standard DC Voltage: 24V
- Commutation: Brushless
- DC Voltage Range: 24.0
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 6.2
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Output Power: 0.0122
- DC Voltage Range: 115.0
- Continuous Current: 0.4700
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 15.6
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0329
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.1
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.1290
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.4
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.1177
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.8
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic lubricant. Hardened output shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Standard DC Voltage: 24V
- Commutation: Brushless
- DC Voltage Range: 24.0
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Torque Constant: 4.18
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0233
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 0.6
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0318
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Units: English; Metric
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Commutation: Brushless
- Continuous Torque: 12.5
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0556
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- DC Voltage Range: 12.0
- Standard DC Voltage: 12V
- Output Power: 0.0216
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Output Power: 0.0097
- DC Voltage Range: 115.0
- Continuous Current: 0.4700