Direct Backplane Interface Data Input Modules
from Dataforth Corporation
SCMD digital input modules provide highly reliable and safe interfaces to harsh industrial measurement and control applications. With SCMD modules installed near individual field signals, a reliable isolation barrier is provided between the field wiring computer system. Other benefits include... [See More]
- Host Connection: Direct Backplane Interface; TTL
- Form Factor: Rack Mount
- Digital I/O Channels: 1
- DC Voltage: 3.3 to 60V
from Gefran
The R-A/D8 module has 8 optically isolated analog inputs at 16 bit ±10V and can be used to send reference signals to drives, servocontrols, solid state power units with linear input, or to retransmit variables to recording devices, other units, etc. Maximum current for each output is 20 mA. [See More]
- Host Connection: Direct Backplane Interface
- Resolution: 16
- Analog Channels: 8
- Isolation: Isolated Analog Voltage Input
from VersaLogic Corporation
VersaLogic's SPX expansion modules provide a new level of economy and convenience for routine I/O expansion. Their small size, low cost, and simplified system interface are possible due to high levels of integration and miniaturization that were not previously available. Unlike larger expansion... [See More]
- Host Connection: Direct Backplane Interface
- Resolution: 12
- Analog Channels: 8
- Form Factor: PC Board
from OMEGA Engineering, Inc.
#162;Measures Type J, K, T, E, R, S, B & N Thermocouples as well as Voltage up to ±100mV. ¢Low Noise, High Accuracy, High Stability 100 kHz Maximum Scan Rate, Compatible with all OMB-LOGBOOK, OMB-DAQBOOK & DAQBOARD Models Operating at Maximum Sampling Rates. ¢High Noise... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 14
- Differential Channels: Yes
- Sampling Frequency: 100
from American Portwell Technology Inc.
32 Channels TTL-Level digital input board for PCI [See More]
- Host Connection: Direct Backplane Interface
- Form Factor: PC Board
- Digital I/O Channels: 32
- Inputs: Relay / Switch Input; TTL
from Campbell Scientific, Inc.
Terminal input modules (TIMs) are small peripherals that provide completion resistors for resistive bridge measurements, or act as voltage dividers or precision current shunts. The modules attach directly to the datalogger?s input terminals. Each module provides circuitry to connect one sensor,... [See More]
- Host Connection: Direct Backplane Interface
- Inputs: Bridge Input
- Form Factor: Module
- Application: General Lab & Industrial
from Electro Standards Laboratories
The CellMite ® ProD Model 4349 is a high performance data acquisition and sensor monitoring module from Electro Standards Laboratories that is suitable for embedded applications that require a ruggedized high speed analog and digital data acquisition unit that is accessible via an Ethernet... [See More]
- Host Connection: Direct Backplane Interface; Ethernet
- Resolution: 12
- Analog Channels: 11
- Isolation: Isolated Digital Inputs; Isolated Analog Voltage Input
from Apix, Inc.
Model DAQ8-80mV41-SPi. ISODAQ SPi INTERFACE MODULE. The Daqpak SPi Series millivolt Input Modules feature 8 independent channels and an SPi interface. They are fully isolated with 3 KVrms between Input, Power, SPi serial link and 2 KVr [See More]
- Host Connection: Direct Backplane Interface
- Sampling Frequency: 1
- Analog Channels: 8
- Resolution: 16
from Measurement Computing
PCI-based 16 electromechanical relays, 16 isolated (500 V) digital input board. KEY HIGHLIGHTS. The PCI-PDISO8 Series relay interface boards are designed for high voltage applications. Each device provides isolated Form C and Form A electromechanical relay output and high current output. [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Isolated Digital Inputs
- Digital I/O Channels: 16
- Form Factor: PC Board
from Acromag, Inc.
16D/32SE input channels. ±5V, ±10V, 0-5V, and 0-10V input ranges. 16-bit A/D converter, 8 µS conversion time (125KHz). AcPC330 boards provide fast, high resolution A/D conversion. The AcPC330 has many features to improve your overall system throughput rate. You can scan all... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 32
- Resolution: 16
from WINSYSTEMS, INC.
WinSystems ’ ISM-TRM-ISO-IN provides 24 lines of optically isolated and digitally debounced inputs to provide easy connections and signal conditioning from field wiring. The board is needed for applications requiring signal isolation between an embedded computer and monitoring points. [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Isolated Digital Inputs
- Analog Channels: 24
- Form Factor: PC Board
from ACCES I/O Products, Inc.
Features. Supports mixed Sensors: Thermocouples, RTDs, strain gages, voltage and current inputs. Multiplexes 16 differential inputs to one analog single-ended output. Cold junction compensation and break detect for thermocouple inputs. Gain programmable (0.5 to 1000) channel-by-channel. Screw... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 16
- Form Factor: PC Board
from Gefran
The R-E16 module has 16 optically isolated digital inputs, 24 VDC, PNP, and acquires logic signals from proximity sensors, drives, etc. It is installed on the backplanes of the R-BUS(x), from which it receives auxiliary power supply (LED). Each input is protected against inversion of polarity and... [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Isolated Digital Inputs
- Digital I/O Channels: 16
- Form Factor: Modular Bay or Slot System
from OMEGA Engineering, Inc.
The OME-A-822PGH/L are 12-bit multifunction analog and digital I/O boards for PC/AT compatible computers. The OME-A-822PGH/L offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bit resolution. In addition,the OME-A-822PGH/PGL has 16 digital inputs, 16... [See More]
- Host Connection: Direct Backplane Interface; TTL
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 16
from American Portwell Technology Inc.
TTL-Level digital input board for PCI [See More]
- Host Connection: Direct Backplane Interface
- Form Factor: PC Board
- Digital I/O Channels: 64
- Inputs: Relay / Switch Input; TTL
from Campbell Scientific, Inc.
The 4WPB100 provides completion resistors for measurement of a 100 Ohm Platinum Resistive Thermometer (PRT). [See More]
- Host Connection: Direct Backplane Interface
- Inputs: Bridge Input
- Form Factor: Module
- Application: General Lab & Industrial
from Measurement Computing
48-channel, 12-bit analog input board with software programmable gains. KEY HIGHLIGHTS. ISA data acquisition (DAQ) boards are available in a variety of configurations to meet the needs of most applications. Features include analog I/O, digital I/O, and counter/timer functions. Available with... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 48
- Resolution: 12
from Acromag, Inc.
AcPC341 boards provide fast, high resolution, simultaneous A/D conversion of eight channels. These boards have sixteen analog inputs which are sampled as two eight-channel banks. Eight A/D converters (ADCs) permit simultaneous conversion of all eight channels in a bank. All 16 channels share two... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 16
- Resolution: 14
from ACCES I/O Products, Inc.
Features. 16, 32, or 48 individually optically isolated AC/DC inputs. Change-of-state detection (IRQ) on selected inputs (certain models). Polarity insensitive AC/DC inputs accept up to 60VDC or AC rms. Optically isolated channel to channel and channel to ground. Universal PCI, PCI-X, 3.3V and 5V... [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Isolated Digital Inputs; Channel-to-Channel Isolation; Channel to Computer, Channel to Ground
- Digital I/O Channels: 16
- Form Factor: PC Board
from Gefran
The R-C3 module has 3 independent 32 bit counters, each with 3 optically isolated digital inputs. For each counter you can: - program operating mode: up/down counting, mono and bidirectional encoder, or measurement of period or frequency. - select the digital filter (from 100Hz up to 400KHz). Each... [See More]
- Host Connection: Direct Backplane Interface
- Resolution: 32
- Digital I/O Channels: 3
- Isolation: Isolated Digital Inputs
from OMEGA Engineering, Inc.
The OME-A-826PG is a 16-bit multifunction analog and digital I/O board for PC/AT compatible computers. The OME-A-826PG offers 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bits resolution. In addition, the OME-A-826PG has 16 digital inputs, 16 digital... [See More]
- Host Connection: Direct Backplane Interface; TTL
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 16
from American Portwell Technology Inc.
Isolated Digital Input Board for PCI [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Isolated Digital Inputs; Optocoupler Isolation
- Digital I/O Channels: 128
- Form Factor: PC Board
from Campbell Scientific, Inc.
The CR7 723 Card provides 14 differential or 28 single-ended inputs for analog voltage measurements in the range of ±5 V. Each CR7 723 is placed in an open slot on the CR7 720 or CR7 720XL I/O module (the CR7 720 can accommodate up to 7 Cards; the CR7 720XL can hold up to 14). More than one... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 14
- Form Factor: PC Board
from Measurement Computing
PCI data acquisition (DAQ) board with eight analog inputs, 12-bit resolution, 40 kS/s sample rate, three 16-bit counters, four digital outputs and three digital inputs. KEY HIGHLIGHTS. The PCI-DAS08 data acquisition (DAQ) board is ideal for low channel count applications and features analog inputs,... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 7
- Analog Channels: 8
- Sampling Frequency: 40
from Acromag, Inc.
bull;64 digital input/output channels. 16-bit counter/timer channels. with six operating modes. Change of state and level interrupts. The AcPC464 module provides 64 digital input/ output channels and four 16-bit multifunction counter/timers. All 64 I/O channels, when set as inputs, support... [See More]
- Host Connection: Direct Backplane Interface
- Form Factor: PC Board
- Digital I/O Channels: 64
- DC Voltage: 0 to 5V
from ACCES I/O Products, Inc.
Features. 16, 32, or 48 individually optically isolated solid-state outputs. Solid-state design permits high-speed switching and long-life expectancy. Load voltages up to 60 Volts, current up to 2A. Lower cost per point than externally-racked solid-state relay modules. Optically isolated channel to... [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Isolated Digital Inputs; Channel-to-Channel Isolation; Channel to Computer, Channel to Ground
- Digital I/O Channels: 16
- Form Factor: PC Board
from OMEGA Engineering, Inc.
The OME-DB-16P is a 16 channel isolated digital input daughter board. The optically isolated inputs of the OME-DB-16P consist of a bi-directional OPTO-coupler with a resistor for current sensing. You can use the OME-DB-16P to sense DC signals from TTL levels up to 24V. You can also use OME-DB-16P to... [See More]
- Host Connection: Direct Backplane Interface; TTL
- Isolation: Isolated Digital Inputs
- Analog Channels: 16
- Form Factor: PC Board
from Campbell Scientific, Inc.
The CR7 723T Card provides 14 differential or 28 single-ended inputs. The CR7 723T also contains an RTD that provides a reference junction for thermocouple measurements that is accurate to ±0.1 °C over the range of -40 ° to +60 °C. Each CR7 723T is placed in an open slot on the... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 28
- Form Factor: PC Board
from Measurement Computing
PCI-based 16-channel, 16-bit, 1 MS/s analog input board. KEY HIGHLIGHTS. The PCI-2500 Series of PCI data acquisition (DAQ) boards provide high speed analog functions along with synchronous analog, digital, and counter/timer functions. Each device supports quadrature encoders, and up to four analog... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 24
from Acromag, Inc.
24 differential I/O, 16 TTL I/O. Four 16-bit counter/timer channels with six operating modes. The AcPC424 provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multifunction counter/timers. The 16 TTL input/output channels can be programmed as inputs or as outputs on... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 40
- Differential Channels: Yes
- Form Factor: PC Board
from ACCES I/O Products, Inc.
Features. 16 Single-Ended / 8 Differential Analog Inputs. 12-Bit Resolution, 100kHz A/D Converter. Eight Programmable Voltage Ranges (Unipolar & Bipolar) and 4-20mA Current Range. FIFO Data and Point List Buffers ('A' version). Both FIFOs 2K. On-board Pacer Clock and Counter Timers. Universal... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 4
from OMEGA Engineering, Inc.
The OME-DB-16R 16-channel relay output board consists of 16 form C relays for efficient switching of loads by programmed control. The relays are energized by applying 5 V signal to the appropriate relay channel on the 20-pin flat cable connector. Sixteen LED ’s (one for each relay) light when... [See More]
- Host Connection: Direct Backplane Interface
- Form Factor: PC Board
- Analog Channels: 16
- Application: General Lab & Industrial
from Campbell Scientific, Inc.
The CR9050 is for use with the CR9000X-series or CR9000-series Measurement and Control Systems. The CR9050 has 14 differential or 28 single-ended inputs for measuring voltages up to ±5 V. An on-board PRT provides a reference temperature for thermocouple measurements, while a heavy copper... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 14
- Form Factor: PC Board
from Measurement Computing
PCI quadrature encoder board with four input channels, an interrupt controller, and one 24-bit counter. KEY HIGHLIGHTS. The PCI-QUAD04 quadrature encoder board provides input channels compatible with industry standard encoders and an interrupt controller for powerful interrupt management options. [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 4
- Form Factor: PC Board
from Acromag, Inc.
16D/32SE analog inputs, 16-bit A/D. Eight analog outputs, 16-bit D/A. 16 TTL digital I/O. One 32-bit counter/timer. AcPC730 I/O boards provide a variety of I/O functions on a single card. These new high-density boards perform both high-speed and high-resolution A/D and D/A conversion and also handle... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 32
- Digital I/O Channels: 16
from ACCES I/O Products, Inc.
Features. 48 individually optically isolated AC/DC inputs. Polarity-insensitive AC/DC inputs accept up to 60 VDC or AC rms. AC or voltage transient filtering. Optically isolated channel-to-channel and channel-to-ground. Factory Options: (call for pricing and availability). 0 to 70 °C and -40 to... [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Isolated Digital Inputs; Channel-to-Channel Isolation; Channel to Ground, Channel to Computer
- Digital I/O Channels: 48
- Form Factor: PC Board
from OMEGA Engineering, Inc.
The OME-DB-24P is a 24 channel isolated digital input daughter board for OME-PIO-D144 digital input board. The optically isolated inputs of the OME-DB-24P consist of a bi-directional opto-couples with a resistor for current sensing. You can use the OME-DB-24P to sense DC signals from TTL levels up... [See More]
- Host Connection: Direct Backplane Interface; TTL
- Isolation: Isolated Digital Inputs
- Analog Channels: 24
- Form Factor: PC Board
from Campbell Scientific, Inc.
The CR9051E Fault-Protected Analog Input Module is for use with the CR9000X-series or CR9000-series Measurement and Control Systems. The CR9051E provides 14 differential (28 single-ended) fault-protected input channels for measuring voltages up to ±5 V. Each input channel is fault-protected... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 14
- Form Factor: PC Board
from Acromag, Inc.
16 differential or 32 single-ended input channels. 200KHz throughput. 5 µS/conversion. Selectable input range ( ±5V, ±10V, 0-5V, 0-10V). IP330A Industrial I/O Pack (IP) modules provide fast, high resolution A/D conversion. The IP330A has many features to improve your overall... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 32
- Resolution: 16
from ACCES I/O Products, Inc.
Features. Eight single-ended analog inputs. 12-bit resolution. Up to 40,000 conversions/second. Programmable scan rate. Can be used with AIM-16 to support up to 128 differential inputs with programmable gains. On-board counter/timer for event counting, pulse and waveform generation, and frequency... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 16
- Analog Channels: 8
- Resolution: 12
from OMEGA Engineering, Inc.
#162;Provides 8 High-Voltage Input Channels. ¢Per-Channel Selection of Three Voltage Ranges Via Jumper. ¢Buffered Inputs on Each Channel for High-Speed Scanning. The OMB-DBK8 provides eight high-impedance, high-voltage input channels for OMEGA's OMB-LOGBOOK and OMB-DAQBOARD-2000 Series... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 8
- Differential Channels: Yes
- Form Factor: PC Board
from Campbell Scientific, Inc.
The CR7 726 provides 8 differential or 16 single-ended inputs. The 726 is software configurable for full-scale measurement ranges of 50 Vdc or 15 Vdc. Each CR7 726 is placed in an open slot on the CR7 720 or CR7 720XL I/O module (the CR7 720 can accommodate up to 7 Cards; the CR7 720XL can hold up... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 8
- Form Factor: PC Board
from Acromag, Inc.
16D/32SE channels ( ±5V, ±10V, 0-5V, and 0-10V input ranges). 16-bit A/D converter. 8 µS conversion time (125KHz). APC330 boards provide fast, high resolution A/D conversion. The APC330 has many features to improve your overall system throughput rate. You can scan all channels or... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 32
- Resolution: 16
from ACCES I/O Products, Inc.
Features. Eight single-ended or differential analog inputs. 12-bit resolution. Nine software programmable voltage ranges. Programmable scan rate. Foreground/background operation. Three 16-bit counter/timers for event counting, pulse and waveform generation, and frequency measurement. Seven bits of... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 8
- Resolution: 12
from OMEGA Engineering, Inc.
#162;16 Differential Input Channels. ¢Unity Gain Combines with OMB-BOARD-2000 Series/OMB-LOGBOOK Gains to Provide Full Scale Inputs from ±156mV to ±10V ( ±625mV to ±5V). ¢Convenient On-Board Screw Terminal Signal Connection. ¢Compact Form Factor Mounts in any... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 16
- Differential Channels: Yes
- Sampling Frequency: 100
from Campbell Scientific, Inc.
This high-performance anti-alias filter module can be used in either the CR9000X-series or CR9000-series Measurement and Control Systems. The CR9052DC module measures accelerometers, strain gages, and microphones. The CR9052DC includes 6 anti-aliased analog measurement channels with differential... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 6
- Form Factor: PC Board
from Acromag, Inc.
40 I/O channels: 24 differential and 16 TTL. Four 16-bit or two 32-bit counter/timers. The APC424 provides 24 differential input/outputs, 16 TTL input/output channels, and four 16-bit multifunction counter/timers. The 16 TTL input/output channels can be programmed as inputs or as outputs on an... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 40
- Differential Channels: Yes
- Form Factor: PC Board
from ACCES I/O Products, Inc.
Features. Eight A/D channels, 12-bit resolution. Programmable scan rate. Foreground/background operation. Seven bits digital I/O. Three 16-bit programmable counter/timers. Can assert interrupts. Event, period, pulse, and pulse-width counting. AIO8 is an economical multifunction, moderate-speed,... [See More]
- Host Connection: Direct Backplane Interface
- Digital I/O Channels: 4
- Analog Channels: 8
- Sampling Frequency: 40
from Acromag, Inc.
Field Input: ±10mV to ±100mV ranges. Host Output: 0-5V or ±5V ranges. Acromag ’s microBlox ™ uB Series I/O modules offer a compact, high-performance solution for interfacing sensors and field devices with data acquisition systems. uB signal conditioning modules are... [See More]
- Host Connection: Direct Backplane Interface
- Isolation: Channel-to-Channel Isolation
- Analog Channels: 1
- Form Factor: Modular Bay or Slot System
from ACCES I/O Products, Inc.
Features. 16 Single-ended or 8 differential analog inputs. Eight-bit resolution. Over 16,000 conversions per second. Programmable scan rate and voltage ranges. Two 8-bit analog outputs. Three programmable counter/timers. Eight digital inputs. Eight digital outputs. +5V output, 1 amp, fused. Model... [See More]
- Host Connection: Direct Backplane Interface
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 8