Steel - Carbon / Alloy Strainers

55 Results
Automatic Backwash Strainer
from Acme Engineering Products

The ACME Automatic Backwash Strainer has been designed to remove solids from 25mm in size down to 30-micron particles. The general literature piece describes the various connection options available as well as the advantages of the Acme backwash arm design over that of competing manufacturers. [See More]

  • Materials: Composite / FRP; Monel; Steel - Carbon / Alloy; Stainless Steel; Duplex 2205
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: Industrial
Cone & Basket Strainer -- CS & BS
from Thermon, Inc

CS & BS Series Cone & Basket Strainers are used to protect fluid and gas handling equipment by removing debris during system start-up. They are easily installed or placed between large flange faces without modifying the surrounding pipe work, and are also easily removable. [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Simplex Basket; Conical Line
  • Strainer Style: Strainer Assembly; Strainer Element
  • Applications: Coolant
Automatic Scraper-Strainer -- ACRS-OF-01-150-CS/SS
from Acme Engineering Products

The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are... [See More]

  • Materials: Composite / FRP; Monel; Steel - Carbon / Alloy; Stainless Steel; Duplex 2204
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: Chemical; Coolant; Water
Basket Type Strainers -- FB1 SERIES
from Acme Engineering Products

The ACME Basket strainer consists of a removable screen that can easily be removed from the top. Basket Strainers are used to trap suspended solids and particulate too large to be caught by most filter media. Basket strainers temporarily disrupt  a  system  when cleaning is... [See More]

  • Materials: Composite / FRP; Steel - Carbon / Alloy; Stainless Steel; Duplex,Super Duplex
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: Chemical; Industrial; Oil/Fuel; Water
AGS Tee Type Strainer -- Series W730
from Victaulic Co. of America

Lighter than flanged wye-type strainers and provides straight-through flow for lower pressure drop. Sizes from 14 – 24 ″ | DN350 -DN600. Pressures up to 300 psi | 2068 kPa | 21 bar [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: TeeType
  • Strainer Style: Strainer Assembly
  • Pipe Size: 14 to 24
Y-Type Cast Carbon Steel Strainer B Series -- 1/2" B * SC/SW
from Armstrong International

Screen chambers won ’t leak or crush. Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; HighTemp; Water; Steam
Alloy Steel Strainer -- Fig 18HP
from Spirax-Sarco

The Fig 18HP is an alloy steel butt weld Y-type strainer with flanged screen cover that has been designed in accordance with ASME B16.34:2004 and ASME VIII. The standard stainless steel screen in the DN15 to DN50 size range has 0.8 mm perforations – See 'Optional extras' for alternative... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Flanged or Weld End Strainer -- NORI 40 FSL/FSS
from KSB AG

Flanged or weld end strainer with standard or fine mesh; all nominal diameters with drain plug in the cover; optional magnetic inserts. Applications. In heat transfer systems, industrial plants, building services and shipbuilding. For thermal oils, water, steam, gas and other non-aggressive fluids. [See More]

  • Materials: Steel - Carbon / Alloy; Cast Steel
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; HighTemp; Oil/Fuel; Water; Shipbuilding
Carbon Steel Y-Type Strainer -- 1/2" WCSY
from Watson McDaniel Company

The WCSY/WSSY Y-Strainers are used to strain dirt particles from fluid in pipe lines and provide inexpensive protection for costly pumps, meters, valves, traps, turbines, and compressors. [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Basket Strainers -- Phönix, 820 - Strainer
from Curtiss-Wright, Valve Group

Strainer basket type with extremely huge filtrating area and low pressure drop. Placed in front of measuring equipment to protect sensitive valves, pumps, aggregates and similar plant components under consideration of the material resistance. [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Hastelloy
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Media: Liquid
Model 50 Plug Type Duplex Strainer
from ISC Sales, Inc.

The Eaton Model 50 plug type duplex strainer (also called a twin basket strainer) consists of two separate high quality strainer baskets, and a pressure rated plug valve. The design is such that it is impossible for this operation to stop the flow because of the unique port design in the diverter... [See More]

  • Materials: Bronze; CastIron; Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Duplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Basket Strainer -- Model 91 T Type
from Eaton

The Eaton Model 91 Tee Strainer offers several advantages over other strainer designs. The strainer is very compact, important in applications where space is restricted. Unlike most other strainers, the Model 91 can be used in either vertical or horizontal installations. A real time saving feature... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: TeeType
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Chemical; Coolant; Food Processing; Lab; Industrial; HighTemp; HighViscosity; Hydraulic; Medical / Pharmaceutical; Oil/Fuel; Refrigerant; Water
Basket Strainers -- Lined True Basket Strainer 1/2"
from G.I.E. Inc.

Fabricated steel body and basket, zinc plated carbon steel bolting [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Element
  • Applications: General Purpose; Chemical; Medical / Pharmaceutical; Water
Steel Epoxy-Coated UL/FM Fire Service Strainers -- 0690891
from Watts

Series 7001, 7002 UL/FM Fire Service Strainers are used in fire service protection applications in conjunction with a water spray system. They feature an epoxy-coated, steel body with flanged or grooved connections. Series 7001, 7002 strainers are UL listed and FM approved. Maximum Working Pressure:... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: TeeType
  • Strainer Style: Strainer Assembly
  • Applications: Fire Service Strainer
Strainers
from Kerotest Manufacturing Corp.

We at Kerotest produce American-made valves that are among the best you can buy anywhere in the world. As an employee-owned TQM company, we don't just talk about quality, we produce it. That's why everyone here is empowered to give you the best product, the best value, and the best service. It's the... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: TeeType
  • Strainer Style: Strainer Assembly
  • Applications: Industrial; Natural Gas
High Pressure Strainers -- Brand: Hydroseal
from CIRCOR Energy

CIRCOR Energy offers a line of ‘Y ’ strainers designed for high pressure applications requiring an easy maintenance, collapse resistance screen. The use of a spiral wound stainless steel screen with in-line cleanout access makes them an excellent choice for the oil & gas industry. [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: Oil & Gas Industry
FIA 15-200 strainer (SVL product range)
from Danfoss A/S

FIA are a range of angleway and straightway strainers, which are carefully designed to give favourable flow conditions. The design makes the strainer easy to install, and ensures quick strainer inspection and cleaning. FIA strainers are used ahead of automatic controls, pumps, compressors etc., for... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: In-line Strainers; Y-strainers (optional feature)
  • Strainer Style: Strainer Assembly
  • Applications: Refrigerant
Steel Strainer -- FS-Series
from Liquid Controls Group; a Unit of IDEX Corporation

Straight-through flow standard... angle inlet to outlet configurations optional. When air eliminator is used, cover is replaced with air eliminator cover assembly. [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: TeeType
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Ball-Plex™ C-Steel Duplex Strainers -- 796FD
from Mueller Steam Specialty

Designed for use in fluid handling systems where the flow cannot be shut down for basket cleaning. Typical applications include: cooling water, compressors, condensers, fire lines, fuel lines, lubrication systems, salt and fresh water systems, chemical process systems, pump suction service and other... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Buna-N, PTFE
  • Strainer Type: Duplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Chemical; Coolant; Industrial; Oil/Fuel; Water; Fire Lines, Lubrication Systems
TopFilter -- TFOW/O
from Johnson Pump, An SPX Brand

For applications where the requirement is for continuous flow with minimum loss of pressure, the TopFilter TFOW provides quality of design and performance. The filter is of cast construction and incorporates two chambers each containing a high quality stainless steel basket. Flow is diverted from... [See More]

  • Materials: CastIron; Steel - Carbon / Alloy; Stainless Steel; Viton, Brass
  • Strainer Type: Duplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Hydronic Strainer -- 730-1-1/2-E-STD
from Victaulic Co. of America

TEE TYPE. 1-1/2 INCH NOMINAL SIZE. 1.5 NOMINAL SIZE - DECIMAL. 1-1/2 NOMINAL SIZE - FRACTIONAL. -30 TO 230 DEG F TEMPERATURE RATING. ORANGE PAINTED CARBON STEEL BODY MATERIAL. 300 PSI PRESSURE RATING. 1-1/2 INCH IPS GROOVED X 1-1/2 INCH IPS GROOVED END CONNECTION. EPDM GASKET SEAL MATERIAL. 5.5 INCH... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: TeeType
  • Strainer Style: Strainer Assembly
  • Pipe Size: 1.5
Y-Type Cast Chrome Moly Steel Strainers C Series -- 1/2" C * SC/SW
from Armstrong International

Screen chambers won ’t leak or crush. Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; HighTemp; Water; Steam
Carbon Steel 'T' Type or Basket Type Strainer -- Fig B34
from Spirax-Sarco

The Fig B34 basket type strainer has been designed for fitting into a horizontal pipeline and has a drain plug fitted at the bottom of the body to drain the unit. The Fig B34 'T' type strainer has been designed for fitting into a vertical pipeline and can has an optional drain plug fitted on the... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Y- type Strainers -- Phönix, 829 - Strainer
from Curtiss-Wright, Valve Group

Supplied as either a Straight pattern or Y-pattern body. Placed in front of measuring equipment to protect sensitive valves, pumps, aggregates and similar plant components under consideration of the material resistance. [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Hastelloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Media: Liquid
Model 53 Ball Type Duplex Basket Strainer
from ISC Sales, Inc.

Eaton's model 53BTX duplex basket strainer can operate continuously, eliminating the need to shut down processes for cleaning of strainers. When the first basket is full, a unique flow diverter cartridge shifts flow to a second basket to permit removal and cleaning with no interruption to... [See More]

  • Materials: Bronze; CastIron; Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Duplex Basket Strainer -- Model 50 5-8 inch
from Eaton

Duplex strainers remove damage causing particulate matter from the process media, and never have to be shut down for cleaning …the line can run continuously. When one strainer basket becomes full, flow is switched to the other by simply turning the operating handle of the strainer. The first... [See More]

  • Materials: Bronze; CastIron; Monel (optional feature); Steel - Carbon / Alloy; Stainless Steel; Stainless or Monel Basket
  • Strainer Type: Duplex Basket; Plug Type
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Steel, UL/FM, Fire Service Basket Strainers -- 0823255
from Watts

Series 97FB-FSFE Steel, UL/FM, Fire Service Strainers are used in fire service protection applications in conjunction with a water spray system. They feature an epoxy-coated, steel body with flanged (Model 97FB-FSFE connections. Series 97FB-FSFE strainers are UL listed and FM approved. Maximum... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Water; Fire Service
Carbon Steel Flanged End Y Strainers -- 781
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. These are especially critical where weld debris is often present in the pipeline. Well suited for long service in high pressure and temperature... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; Water
Hydronic Strainer -- 730-10IN-E-GLV
from Victaulic Co. of America

TEE TYPE. 10 INCH NOMINAL SIZE. 10 NOMINAL SIZE - DECIMAL. 10 NOMINAL SIZE - FRACTIONAL. -30 TO 230 DEG F TEMPERATURE RATING. GALVANIZED CARBON STEEL BODY MATERIAL. 300 PSI PRESSURE RATING. 10 INCH IPS GROOVED X 10 INCH IPS GROOVED END CONNECTION. EPDM GASKET SEAL MATERIAL. 18 INCH END TO END... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: TeeType
  • Strainer Style: Strainer Assembly
  • Pressure Rating: 300
Y-Type Forged Steel Strainer D Series -- 1/2" D * SW
from Armstrong International

Screen chambers won ’t leak or crush. Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; HighTemp; Water; Steam
Carbon Steel 'Y' Type Strainer - EN Material -- Fig 34
from Spirax-Sarco

The Fig 34 is an integrally flanged Y-type strainer designed to remove rust, scale and other debris from the pipeline. The standard stainless steel screen is 3 mm perforations. Please note: Low temperature carbon steel or stainless steel versions of this strainer are available on reques [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Y- type Strainers -- Strack, S29 - Strainer
from Curtiss-Wright, Valve Group

Supplied as either a Straight pattern or Y-pattern body. Placed in front of measuring equipment to protect sensitive valves, pumps, aggregates and similar plant components under consideration of the material resistance. [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Media: Liquid
Duplex Basket Strainer -- Model 53 BTX up to 4 inches
from Eaton

The Model 53BTX Duplex Strainer will give years of trouble-free service, protecting expensive pipeline system components from damage by unwanted particles. Because the system flow never has to be shut down for basket cleaning, the Model 53BTX duplex strainer is perfect for lines that must run... [See More]

  • Materials: Bronze; CastIron; Monel (optional feature); Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Duplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Carbon Steel or Alloy Steel Y Strainers -- 764
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. They are especially critical where weld debris is often present in the pipeline. Well suited for long service in high pressure and temperature... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; HighTemp; Water
Hydronic Strainer -- 732-10IN-E-GLV
from Victaulic Co. of America

Y TYPE. 10 INCH NOMINAL SIZE. 10 NOMINAL SIZE - DECIMAL. 10 NOMINAL SIZE - FRACTIONAL. -30 TO 230 DEG F TEMPERATURE RATING. GALVANIZED CARBON STEEL BODY MATERIAL. 300 PSI PRESSURE RATING. 10 INCH IPS GROOVED X 10 INCH IPS GROOVED END CONNECTION. EPDM GASKET SEAL MATERIAL. 27 INCH END TO END... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Pressure Rating: 300
Carbon Steel Strainer -- Fig 14
from Spirax-Sarco

The Fig 14 is a carbon steel Y-type strainer designed to remove scale, rust and other debris from the pipeline. The standard stainless steel screen is 0.8 mm perforations. [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Fabricated Strainer -- Model 90 1-48 inch
from Eaton

Designed for manufacturing flexibility, the Eaton Model 90 Fabricated Simplex Strainer can be manufactured for pipeline sizes from 1 ˝ to 48 ˝ in carbon steel or stainless steel. Other materials are available upon request. Simplex pipeline strainers remove damage causing particulate matter... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Chemical; Coolant; Food Processing; Lab; Industrial; HighTemp; HighViscosity; Hydraulic; Medical / Pharmaceutical; Oil/Fuel; Refrigerant; Water
Carbon Steel or Alloy Steel Y Strainers -- 766M
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. They are especially critical where weld debris is often present in the pipeline. Well suited for long service in high pressure and temperature... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; HighTemp; Water
Hydronic Strainer -- 732-10IN-E-STD
from Victaulic Co. of America

Y TYPE. 10 INCH NOMINAL SIZE. 10 NOMINAL SIZE - DECIMAL. 10 NOMINAL SIZE - FRACTIONAL. -30 TO 230 DEG F TEMPERATURE RATING. CARBON STEEL BODY MATERIAL. 300 PSI PRESSURE RATING. 10 INCH IPS GROOVED X 10 INCH IPS GROOVED END CONNECTION. EPDM GASKET SEAL MATERIAL. 27 INCH END TO END DISTANCE. 2 INCH... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Pressure Rating: 300
Carbon Steel Strainer -- Fig 34HP
from Spirax-Sarco

The Fig 34HP is a cast carbon steel Y-type strainer that has been designed in accordance with ASME B16.34:2004 and ASME VIII, that is readily available with integrally flanged or butt weld connections. The standard stainless steel screen in the DN15 to DN80 size range has 0.8 mm perforations, and... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Fabricated Strainer -- Model 950B Duplex Offset Strainer Bolted Cover (BC) 2-24 inch
from Eaton

The Eaton Model 950 features two strainer basket housing with a valve flow diverter assembly connecting them. A duplex type basket strainer can operate continuously and the pipeline never has to be shut down. The Eaton Model 950B fabricated duplex strainers operate continuously and feature two... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Duplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Carbon Steel or Alloy Steel Y Strainers -- 782
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. These are especially critical where weld debris is often present in the pipeline. They are well suited for long service in high pressure and... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Tang Graphite
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; Water
Carbon Steel Strainer -- Fig 7
from Spirax-Sarco

The Fig 7 is a carbon steel integrally flanged pot type strainer. The standard stainless steel screen is 3.2 mm perforations. The body has two bosses that can be drilled and tapped to accomodate pressure gauges and the cover has a " UNC-2B tapping for fitting an eyebolt. The body can also be drained... [See More]

  • Materials: Steel - Carbon / Alloy
  • Strainer Type: Pot Type Strainer
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose
Fabricated Strainer -- Model 950B Duplex Offset Strainer Quick Opening Cover (QOC) 2-24 inch
from Eaton

The Eaton Model 950 features two strainer basket housing with a valve flow diverter assembly connecting them. A duplex type basket strainer can operate continuously and the pipeline never has to be shut down. The Eaton Model 950B fabricated duplex strainers operate continuously and feature two... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Duplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Carbon Steel or Alloy Steel Y Strainers -- 861
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. These are especially critical where weld debris is often present in the pipeline. They are well suited for long service in high pressure and... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; HighTemp; Water
Simplex Basket Strainer -- Model 510 Multi-Basket
from Eaton

The Model 510 simplex strainer is unlike other large size simplex strainers because of its multi-basket design. Four strainer baskets strain the process media and give the strainer an extremely high dirt removal capability. The strainer protects system components such as flow meters, pumps, and... [See More]

  • Materials: Bronze (optional feature); CastIron; Monel (optional feature); Steel - Carbon / Alloy; Stainless Steel (optional feature); Stainless or Monel Basket
  • Strainer Type: Simplex Basket; TeeType; Multi-Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Carbon Steel or Alloy Steel Y Strainers -- 862
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. These are especially critical where weld debris is often present in the pipeline. They are well suited for long service in high pressure and... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; HighTemp; Water
Simplex Basket Strainer -- Model 72 Basket
from Eaton

The Eaton Model 72 simplex basket strainer is perfect for applications in which the line can be temporarily shut down for strainer basket cleaning or changeout. A reason for its popularity is the unusually large basket capacity. The free straining area with a perforated basket is a minimum of six... [See More]

  • Materials: Bronze; CastIron; Monel (optional feature); Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Carbon Steel or Alloy Steel Y Strainers -- 863M
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. They are especially critical where weld debris is often present in the pipeline. Well suited for long service in high pressure and temperature... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; HighTemp; Water
Simplex Basket Strainer -- Model 73 Straight Flow
from Eaton

The Eaton Model 73 simplex basket strainer, with its straight flow design, greatly reduces pressure loss and results in a compact strainer that can fit in tight spaces. American Bureau of Shipping (ABS) Type Approved for ship designers, builders and owners. Large size pipelines with high flow rates... [See More]

  • Materials: Bronze; CastIron; Monel (optional feature); Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Simplex Basket; TeeType
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Carbon Steel or Alloy Steel Y Strainers -- 865
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. They are especially critical where weld debris is often present in the pipeline. Well suited for long service in high pressure and temperature... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; HighTemp; Water
Y-Strainers (Wye Strainers)
from Eaton

Eaton Y strainers are a cost-effective solution for the mechanical removal of unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process... [See More]

  • Materials: Monel (optional feature); Steel - Carbon / Alloy; Stainless Steel
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial
Carbon Steel Simplex Basket Strainers -- 126F-CS
from Mueller Steam Specialty

Designed for use chemical processes including brine, paint, fuel oil, organic and inorganic chemicals, condensers, heat exchangers and other similar applications. These strainers provide protection for costly pumps, meters, valves and other similar mechanical equipment. [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; 316SS Graphite
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Chemical; Coolant; Industrial; Oil/Fuel; Water; Brine, Paint, Condensers
Cast Carbon Steel Y Strainers -- 581
from Mueller Steam Specialty

Used to strain foreign matter from pipelines and provide economical protection for costly pumps, meters, valves, and other similar mechanical equipment. These are especially critical where weld debris is often present in the pipeline. Well suited for long service in high pressure and temperature... [See More]

  • Materials: Steel - Carbon / Alloy; Stainless Steel; Spiral Wound Graphite Filled
  • Strainer Type: Y-strainers
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Industrial; Water
Cast Iron Basket Strainers -- 165
from Mueller Steam Specialty

Designed for cooling water, seawater, hot water systems and other similar applications. These strainers are especially suited for medium or coarse straining. [See More]

  • Materials: CastIron; Steel - Carbon / Alloy; Stainless Steel; Compressed Fiber, A516-70 Plate
  • Strainer Type: Simplex Basket
  • Strainer Style: Strainer Assembly
  • Applications: General Purpose; Coolant; Industrial; Water; Sea Water, Hot Water Systems