DC Brushed Motor Motor Speed Controllers
from ElectroCraft
The ElectroCraft PRO Series Programmable Servo Drives are based on the latest in digital drive technology, offering a cost effective, compact and modular solution for the control of rotary or linear brushless, stepper or PMDC brush motors. The ElectroCraft PRO Series drives integrate advanced motion... [See More]
- Motor / System: DC Brushed; DC Brushless
- Power: 385
- Axes: 1.0
- PC-Based Bus: CANbus; CANopen; USB
from DigiKey
6-CH INTELLIGENT FAN CONTROLLER [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount; 40-WFQFN Exposed Pad
- Operating Temperature: -40 to 85
- AC Input: 3 to 6
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Motor / System: DC Brushed; DC Brushless
- Power: 720
- Axes: 1.0
- PC-Based Bus: USB
from DigiKey
70V GATE DRIVER WITH MOTION CONT [See More]
- Motor / System: DC Brushed; DC Brushless
- Operating Temperature: -40 to 125
- PC-Based Bus: SPI, UART
- Configuration: PCB Mount; 64-WFQFN Exposed Pad
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Motor / System: DC Brushed; DC Brushless
- Power: 2400
- Axes: 1.0
- PC-Based Bus: USB
from DigiKey
11-V 4-A H-BRIDGE MOTOR DRIVER W [See More]
- Motor / System: DC Brushed; Bipolar
- Configuration: PCB Mount; 16-WFQFN Exposed Pad
- Operating Temperature: -40 to 125
- AC Input: 2 to 6
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Motor / System: DC Brushed; DC Brushless
- Power: 4800
- Axes: 1.0
- PC-Based Bus: USB
from DigiKey
Motor Driver PWM 20-TSSOP [See More]
- Motor / System: DC Brushed
- Operating Temperature: -30 to 95
- PC-Based Bus: PWM
- Configuration: PCB Mount; "20-TSSOP (0.173"", 4.40mm Width)"
from ElectroCraft
The Universal Drive takes performance, efficiency and flexibility to the next level, utilizing state-of-the-art digital drive technology combined with an intuitive and highly configurable user interface. Perfect for a wide range of industrial, commercial market, and consumer product applications. [See More]
- Motor / System: DC Brushed; DC Brushless
- Power: 288
- Axes: 1.0
- PC-Based Bus: USB
from DigiKey
IC 2PHS PREDRVR 4.5-28V 28TSSOP [See More]
- Motor / System: DC Brushed; Bipolar
- Operating Temperature: -40 to 150
- PC-Based Bus: PWM
- Configuration: PCB Mount; "28-TSSOP (0.173"", 4.40mm Width) Exposed Pad"
from DigiKey
BLDC_DRIVER_IC [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 150
- PC-Based Bus: CANbus
- Configuration: PCB Mount; 48-VFQFN Exposed Pad
from DigiKey
AUTOMOTIVE DRIVER [See More]
- Motor / System: DC Brushed; Bipolar
- Operating Temperature: -40 to 125
- PC-Based Bus: PWM, SPI
- Configuration: PCB Mount; 40-VFQFN Exposed Pad
from DigiKey
VFQFPN 7X7X1.0 48 PITCH 0.5 [See More]
- Motor / System: DC Brushed
- Configuration: 48-TFQFN Exposed Pad
- Operating Temperature: -40 to 125
- AC Input: 7 to 45
from DigiKey
JUNO DCB VEL CTRL IC, 64PIN [See More]
- Motor / System: DC Brushed; Voice Coil
- Operating Temperature: -40 to 105
- PC-Based Bus: CANbus; RS232; RS485
- Configuration: PCB Mount; 64-TQFP
from DigiKey
2CH HALF-BRIDGE GATE DRIVERTHE B [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 125
- PC-Based Bus: SPI
- Configuration: PCB Mount; "24-VSSOP (0.220"", 5.60mm Width) Exposed Pad"
from DigiKey
Motor Driver 8-SOP [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount; "8-SOIC (0.173"", 4.40mm Width)"
- Operating Temperature: -20 to 75
- AC Input: 2 to 5
from DigiKey
Motor Driver Power MOSFET PWM 20-SSOP-C [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 100
- PC-Based Bus: PWM
- Configuration: PCB Mount; "20-LFSOP (0.173"", 4.40mm Width)"
from DigiKey
Motor Driver Parallel, PWM 14-SOIC [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 85
- PC-Based Bus: Parallel Interface
- Configuration: PCB Mount; "14-SOIC (0.154"", 3.90mm Width)"
from DigiKey
Motor Driver PMOS I ²C, SMBus 16-SSOP [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount; "16-SSOP (0.154"", 3.90mm Width)"
- Operating Temperature: 0 to 70
- AC Input: 3 to 6
from DigiKey
Motor Driver I ²C 28-TQFN (5x5) [See More]
- Motor / System: DC Brushed
- Configuration: PCB Mount; 28-WFQFN Exposed Pad
- Operating Temperature: -40 to 125
- AC Input: 3 to 6
from DigiKey
Motor Driver Bi-CMOS PWM 48-HTSSOP [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 125
- PC-Based Bus: PWM
- Configuration: PCB Mount; "48-TFSOP (0.240"", 6.10mm Width) Exposed Pad"
from DigiKey
Motor Driver Analog PG-DSO-8 [See More]
- Motor / System: DC Brushed
- Operating Temperature: 0 to 70
- PC-Based Bus: Analog
- Configuration: PCB Mount; "8-SOIC (0.154"", 3.90mm Width)"
from Critical Velocity Enterprises, LLC
The BIDIR-309 is a fully solid-state motor controller that allows you to control the speed and direction of a brushed DC motor using a potentiometer or a 0-5V voltage level. Logic DIR and BRAKE inputs control motor direction and braking. Automatic current limiting protects the controller and motor... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 60
- Power: 230
- Configuration: PC Board
from Dart Controls, Inc.
A compact, cost-efficient, reliable control for PM, Shunt Wound DC motors and Universal motors. The 125 Series variable speed control incorporates up-to-date design and engineering into an amazingly small package. Installation and field adjustment are facilitated using a barrier type terminal strip... [See More]
- Motor / System: DC Brushed
- Power: 14.92
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The DCH series combines an AC to DC switching power supply with a regenerative PWM drive, creating an all in one solution to applications requiring control of 12 or 24 VDC motors when only 115 or 230 VAC power is available. The microprocessor design allows the drive to be programmed for custom... [See More]
- Motor / System: DC Brushed
- Power: 20 to 30
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from PERFORMANCE CONTROLS, INC.®
The DCD Series of four-quadrant and two-quadrant DC motor servo drives utilizes a high performance Digital Signal Processor (DSP), high efficiency MOSFETS, and proprietary control techniques to perform smooth, reliable motor control functions with a high degree of flexibility. Parameters are... [See More]
- Motor / System: DC Brushed; DC Servo
- Configuration: Stand Alone
- Operating Temperature: 0 to 50
- DC Input: 24 to 48
from Critical Velocity Enterprises, LLC
Control the speed and direction of a DC motor using any 1k to 30k potentiometer. This PWM motor controller runs cool while handling up to 15 amps of continuous current. Features: Use any 1k to 30k pot for control Digital input filtering allows smooth control even with dirty pots Logic Controller... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 60
- Power: 390
- Configuration: PC Board
from Dart Controls, Inc.
A compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes Dart's Micro-Drive the ultimate value in accuracy and control. [See More]
- Motor / System: DC Brushed
- Power: 373
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The DCH series combines an AC to DC switching power supply with a regenerative PWM drive, creating an all in one solution to applications requiring control of 12 or 24 VDC motors when only 115 or 230 VAC power is available. The microprocessor design allows the drive to be programmed for custom... [See More]
- Motor / System: DC Brushed
- Power: 20 to 100
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k to 30k potentiometer, 0-5V signal, push buttons or logic pulses from a microcontroller. This controller features a silent PWM switching frequency for use in noise-sensitive applications. It can also be used as a low voltage light dimmer for halogen lamps,... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 85
- Power: 540
- Configuration: PC Board
from Dart Controls, Inc.
A general purpose, economical variable speed control for small DC and universal motor applications featuring: dual input voltages of 12/24 VAC or 120/240 VAC with DC output current rating of 2 Amps, adjustable trimpot settings, and quick connect terminal pins. The 15 Series is available in two... [See More]
- Motor / System: DC Brushed
- Power: 18.65
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The DCN series of drives are reliable low voltage drives that provide both speed control and current limiting in low HP applications. Roughly the size of a quarter, these drives are being implemented in applications in which the customer traditionally powers the motor directly off a power supply or... [See More]
- Motor / System: DC Brushed
- Power: 10 to 20
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from Critical Velocity Enterprises, LLC
This Analog / Digital PWM Controller gives you the most flexibility for your application. Give your project a high-tech feel with push button speed control. It can also be used as a low voltage light dimmer for halogen lamps, or for controlling heaters and irons. 4 Ways to Control: Analog: Use any... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 85
- Power: 540
- Configuration: PC Board
from Dart Controls, Inc.
Rated for 10 amps continuous current, the 65E10 is a high performance PWM control for 12, 24, and 36-volt battery powered equipment. Features include adjustable maximum speed, minimum speed, current limit, I.R. compensation, and acceleration, plus a quiet operating frequency of 18kHz. A speed... [See More]
- Motor / System: DC Brushed
- Product: Battery Controlled; Pulse Width Modulation Drive; Variable Speed
- Axes: 1.0
- Operating Temperature: -10 to 45
from American Control Electronics
The DCN series of drives are reliable low voltage drives that provide both speed control and current limiting in low HP applications. Roughly the size of a quarter, these drives are being implemented in applications in which the customer traditionally powers the motor directly off a power supply or... [See More]
- Motor / System: DC Brushed
- Power: 20 to 30
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k, 5k, 10k or 25k potentiometer, 0-5V signal, push buttons or logic pulses from a microcontroller. This controller features a silent PWM switching frequency for use in noise-sensitive applications. It can also be used as a low voltage light dimmer for... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 100
- Power: 840
- Configuration: PC Board
from Dart Controls, Inc.
A high performance control for 12, 24, and 36 volt battery powered equipment providing smooth control with high efficiency. The 65 Series is a pulse width modulated battery control utilizing power FET's. The control's advanced design permits a substantial increase in the equipment running time... [See More]
- Motor / System: DC Brushed
- Product: Battery Controlled; Pulse Width Modulation Drive; Variable Speed
- Axes: 1.0
- Operating Temperature: -10 to 45
from American Control Electronics
The DCN series of drives are reliable low voltage drives that provide both speed control and current limiting in low HP applications. Roughly the size of a quarter, these drives are being implemented in applications in which the customer traditionally powers the motor directly off a power supply or... [See More]
- Motor / System: DC Brushed
- Power: 10 to 50
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from Critical Velocity Enterprises, LLC
Control the speed of a DC motor using any 1k to 30k potentiometer. This PWM motor controller runs cool while handling up to 10 amps of continuous current. It can also be used as a low voltage light dimmer for halogen lamps, or for controlling heaters and irons. Features: Use any 1k to 30k pot for... [See More]
- Motor / System: DC Brushed
- Operating Temperature: -40 to 85
- Power: 580
- Configuration: PC Board
from Dart Controls, Inc.
The 130 Series reversing control from Dart Controls utilizes Dart's unique zero-speed detect and solid state dynamic braking circuits. These circuits eliminate the contact arcing and failed braking problems associated with other reversing and dynamic braking controls. Dart's zero-speed detect... [See More]
- Motor / System: DC Brushed
- Power: 93.27
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively.The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for aPLC and/or sensors. They can even be programmed for use in the... [See More]
- Motor / System: DC Brushed
- Power: 70 to 1100
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from Dart Controls, Inc.
The 250 Series offers superb flexibility, reliability, and value. A general purpose, economical control rated to 2 horsepower, it provides the ultimate in standard features and versatility including: dual voltage (120/240VAC), adjustable H.P. settings, packaged power bridge, barrier terminal strip,... [See More]
- Motor / System: DC Brushed
- Power: 14.92
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and/or sensors. They can even be programmed for use in the... [See More]
- Motor / System: DC Brushed
- Power: 10 to 200
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from Dart Controls, Inc.
Dart's top of the line DC speed control is reliable, versatile, and economical. Rated to 3 horsepower, it provides many standard features typically offered as options. The Dart 500 Series control combines advanced engineering design, quality component selection and rigorous quality control to... [See More]
- Motor / System: DC Brushed
- Power: 93.27
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively.The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for aPLC and/or sensors. They can even be programmed for use in the... [See More]
- Motor / System: DC Brushed
- Power: 150 to 2300
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively.The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for aPLC and/or sensors. They can even be programmed for use in the... [See More]
- Motor / System: DC Brushed
- Power: 20 to 250
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively. The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for a PLC and/or sensors. They can even be programmed for use in the... [See More]
- Motor / System: DC Brushed
- Power: 10 to 50
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The DCR series are microprocessor based, low voltage PWM drives that are capable of braking and reversing regeneratively.The microprocessor allows for custom programming to fit any OEMs custom needs, sometimes eliminating the need for aPLC and/or sensors. They can even be programmed for use in the... [See More]
- Motor / System: DC Brushed
- Power: 30 to 500
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The ELC series is American Control Electronics approach to competition...by adding value. We've taken the LGC400-10 and kept the most commonly requested features; 115 VAC input for a 90 VDC permanent magnet motor. We've compressed the physical footprint of the drive to save space for customers who... [See More]
- Motor / System: DC Brushed
- Power: 100 to 750
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The LGC series is our most widely used series for general purpose 90/180 VDC brushed DC motor applications. This compact, non-filtered SCR drive series offers many user friendly adjustments. With the use of the on-board trim pots you can quickly set maximum speed, acceleration rate, deceleration... [See More]
- Motor / System: DC Brushed
- Power: 40 to 200
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The LGD series of motor drives is a versatile and compact SCR drive designed for any 1Q application where a field output is not required. With most of the features offered by the LGC family of drives, the LGD series offers even more flexibility. Unlike the LGC series where it ’s inhibit... [See More]
- Motor / System: DC Brushed
- Power: 40 to 200
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
With the LGM series, the features list just keeps growing. With its Burr Brown linear isolated input, the LGM series can accept a grounded 4-20 mA or 0-10 VDC signal from any Programmable Logic Control (PLC) or motion card to control motor speed. With its isolated inputs, the LGM series can easily... [See More]
- Motor / System: DC Brushed
- Power: 20 to 400
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The LGP series is a non-filtered SCR drive with isolation designed to run permanent magnet DC motors. These 1Q drives can accept any 0-10 VDC signal range for motor speed control. Single voltage units utilize our compact industry standard footprint, while dual voltage units come pre-mounted on a... [See More]
- Motor / System: DC Brushed
- Power: 40 to 150
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The MHS series of drives adds to our already feature rich 1Q offering. With an isolated input that can accept a grounded 4-20 mA or 0-10 VDC signal, Programmable Logic Control (PLC) or motion card connectivity is easy. The addition of cage clamp terminals on all logic connections, and power... [See More]
- Motor / System: DC Brushed
- Power: 40 to 200
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The MUN series is American Control Electronics approach to competition...by adding value. We've taken the LGC400-10 and kept the most commonly requested features; 115 VAC input for a 90 VDC permanent magnet motor. We've compressed the physical footprint of the drive to save space for customers who... [See More]
- Motor / System: DC Brushed
- Power: 100 to 750
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The PAT series is a versatile and robustly designed full feature drive for PM or shunt-wound motors. The standard NEMA 4X plastic enclosure makes this series the perfect choice for harsh environments where protection from moisture is needed. With its factory installed heat sink, this series can... [See More]
- Motor / System: DC Brushed
- Power: 100 to 1500
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
The PMB series is American Control Electronics's choice for a 4Q PWM series. PMB Series drives can control motors rated for 90, 130, 180, or 240 VDC range with either a 115 or 230 VAC line input, up to 7 amps or 1.5 HP. With the use of on-board trim pots, you can quickly set the forward and reverse... [See More]
- Motor / System: DC Brushed
- Power: 40 to 600
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The PWL series adds to the versatility of our PWM offering by adding field voltage outputs for shunt-wound motors. With on-board selector switches, this series can easily be setup to accept 115 VAC or 230 VAC power. This full featured series comes with on-board fusing and cage clamp terminals to... [See More]
- Motor / System: DC Brushed
- Power: 40 to 400
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The flagship of our Pulse Width Modulation family, the PWM series combines the most sought after features and options all in one package. With its auto ranging switch mode power supply, the need for selecting AC power input modes is no longer needed. Available with isolated inputs, this series can... [See More]
- Motor / System: DC Brushed
- Power: 40 to 250
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The PWP series is an economical and compact solution for those who seek the benefits of Pulse Width Modulation (PWM) technology. The almost pure DC voltage provided by the PWP series allows for quieter and cooler operation of any permanent magnet DC motor. The 1.05 form factor of the DC output... [See More]
- Motor / System: DC Brushed
- Power: 40 to 150
- Axes: 1.0
- Product: Pulse Width Modulation Drive; Variable Speed
from American Control Electronics
The RGA series of 4Q drives is well suited for applications that require the control of overhauling loads, frequent reversing or breaking. With on-board fusing and cage clamp power and logic terminals, installation has been made simple. Available in either open chassis style or in a NEMA 4X... [See More]
- Motor / System: DC Brushed
- Power: 40 to 400
- Axes: 1.0
- Product: Variable Speed
from American Control Electronics
When simplicity and a compact package are important factors in a machine design, the SPM series offers several cost effective solutions. While costs are kept low by providing no frills speed control, the SPM series still supplies the same type of full-wave DC voltage found on more expensive drives. [See More]
- Motor / System: DC Brushed
- Power: 20 to 150
- Axes: 1.0
- Product: Variable Speed