Single Phase Motor Speed Controllers
from Yaskawa America, Inc. - Motion Division
10W to 55kW, 1.6 kHz Bandwidth. The Sigma-5 servo amplifier delivers the highest performance in the industry due its unmatched frequency response, reduced settling times and more precise control. In addition it provides a faster set up, simpler tuning, and vibration suppression. With a wide range of... [See More]
- Phase : Single Phase; Three Phase
- Motor / System: Linear
- Axes: 1.0
- Product: Multi-Axis
from Yaskawa America, Inc. - Drives Division
1/8 - 25 HP. The V1000 is a world-class compact current vector drive that defines a new world standard. Demands for efficient production and better maintainability are on the rise, spurred by global competition. Yaskawa pays off the promise of being in control with products that make businesses... [See More]
- Phase : Single Phase
- Motor / System: Vector Feedback
- Axes: 1.0
- Power: 93.27 to 187
from Yaskawa America, Inc. - Motion Division
The SGMJV small capacity brushless Sigma-5 servo motor can be used in a variety of applications. Features. Medium inertia. Instantaneous peak torque (350% of rated torque). Mounted high resolution serial encoder: 13, 20 bit. Maximum speed: 6,000 rpm. Wide selection: 50W to 750W capacity, holding... [See More]
- Phase : Single Phase
- Power: 50
- Axes: 1.0
- AC Input: 200
from Yaskawa America, Inc. - Drives Division
1/8 - 25 HP. The V1000-4X is a version of the standard V1000 in an integral enclosure that meets NEMA type 4X/12 indoor use requirements, UL type 4X/12 standards, and the IP66 rating of IEC 529. This enclosure provides the protection required in tough washdown or dust-tight environments, common in... [See More]
- Phase : Single Phase
- Motor / System: Vector Feedback
- Axes: 1.0
- Power: 93.27 to 187
from Nidec Control Techniques
Commander SK is a compact, easy-to-use general purpose drive that simplifies the installation and configuration of the drive to save time, yet has the performance and depth of functions required to solve more complex applications challenges, delivering superior value and motor control. All drives in... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector
- Axes: 1.0
- Power: 250
from Ziehl-Abegg Inc.
Specification: For simple manual speed regulation 5-step transformer-based controllers for single-phase and three-phase fans are available. We supply the corresponding switchgear for multi-speed motors. Motor protection devices are available for thermal monitoring based on thermostats or thermistors... [See More]
- Phase : Single Phase
- Configuration: Panel Mount
- Product: Variable Speed
- AC Input: 230
from Dart Controls, Inc.
A compact, cost-efficient, reliable control for PM, Shunt Wound DC motors and Universal motors. The 125 Series variable speed control incorporates up-to-date design and engineering into an amazingly small package. Installation and field adjustment are facilitated using a barrier type terminal strip... [See More]
- Phase : Single Phase
- Motor / System: DC Brushed
- Axes: 1.0
- Power: 14.92
from American Control Electronics
The ACT series drive delivers the features and benefits of a microprocessor based drive and the low cost of a triac control. The ACT output is a variable voltage with a constant frequency, making it perfect for a small speed range control of a single phase AC motor, such as a permanent split... [See More]
- Phase : Single Phase
- Power: 373 to 746
- Axes: 1.0
- Product: TRIAC Control
from Magnatex Pumps, Inc.
Advanced performance makes it possible to support a wide range of variable speed applications from conveyance and chemical machines to line control applications such as winding and printing machines. Improved flexibility allows users to tailor their VFD to meet their application requirements. Real... [See More]
- Phase : Single Phase
- Product: Variable Speed
- Axes: 1.0
- PC-Based Bus: RS485
from Gefran
The SIEIDrive ADL200 is the result of GEFRAN ’s experience in the civil lift engineering sector, gained from its commitment to working in close partnership with leading operators in the sector to develop technical solutions and application programs. The ADL200 integrates the most complete and... [See More]
- Phase : Single Phase; Three Phase
- Power: 1100 to 75000
- Motor / System: Sensorless Vector
- PC-Based Bus: RS485; Modbus RTU
from Shenzhen Power Motor Industrial Co., Ltd.
Introduction: High voltage switch board, AC universal motor speed regulation, AC 230V input Application: AC universal motor Size: 48*48*H40 [See More]
- Phase : Single Phase
- Configuration: PC Board
- Motor / System: Induction
- AC Input: 230
from Electro-Sensors, Inc.
MicroSpeed Controller. Features. • 0.01% speed regulation in Master Mode. • Zero cumulative error in Follower Mode. • Isolated drive reference voltage. • Incremental speed adjustment for operator control. • Diagnostics for easy troubleshooting. • DIN standard steel... [See More]
- Phase : Single Phase
- PC-Based Bus: RS422
- Axes: 1.0
- Operating Temperature: 0 to 50
from OMEGA Engineering, Inc.
The NFX9000 adjustable frequency AC Drives are designed to provide adjustable speed control of 3-phase motors. These microprocessor-based drives have standard features that can be programmed to tailor the drive's performance to suit a wide variety of application requirements. The NFX9000... [See More]
- Phase : Single Phase; Three Phase
- Product: Variable Speed
- Power: 187 to 1492
- PC-Based Bus: RS485
from Mitsubishi Electric Automation, Inc.
The FR-F800-E is a pump and fan control VFD that combines performance, accuracy and reliability with embedded Ethernet based communications to enhance overall system flexibility. With 100Mbps Ethernet TCP/IP and BACnet/IP connectivity as the standard, the FR-F800-E provides an increased ability for... [See More]
- Phase : Single Phase; Three Phase
- Product: Variable Speed
- Power: 746 to 447688
- PC-Based Bus: Ethernet
from Sinotech
Motor controllers can be customized upon request. [See More]
- Phase : Single Phase
- Motor / System: Induction
- Axes: 1.0
- Power: 6 to 140
from Eaton Corporation - Drives
These microprocessor-based, sensorless vector drives provide adjustable speed control for three-phase motors. They come with standard features that can be programmed to customize the drive's performance to suit a wide variety of applications, and they include a digital display and operating and... [See More]
- Phase : Single Phase
- Motor / System: Sensorless Vector
- Axes: 1.0
- Power: 187
from Nidec Control Techniques
Commander SK is a compact, easy-to-use general purpose drive that simplifies the installation and configuration of the drive to save time, yet has the performance and depth of functions required to solve more complex applications challenges, delivering superior value and motor control. All drives in... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector
- Axes: 1.0
- Power: 750
from Dart Controls, Inc.
A compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes Dart's Micro-Drive the ultimate value in accuracy and control. [See More]
- Phase : Single Phase
- Motor / System: DC Brushed
- Axes: 1.0
- Power: 373
from American Control Electronics
The PMF Series is a variable frequency drive designed to run 115 or 230 VAC motors, whether single phase or three phase, at 50 or 60 Hz. With our "Doubler Mode", a 115 VAC line can be doubled to control 230 VAC motors. And unlike most variable frequency drives, the PMF Series will allows a 230 VAC... [See More]
- Phase : Single Phase
- Power: 60 to 600
- Axes: 1.0
- Configuration: PC Board
from Magnatex Pumps, Inc.
Low Cost Sub-Micro VFD. Digital setting dial with integrated display, making configuration fast and easy. Control remotely or with built-in digital control. Low cost and Mitsubishi Electric quality ensure solid solutions. Magnetic Flux Vector Control with auto-tuning. Safety stop function [See More]
- Phase : Single Phase
- Product: Variable Speed
- Axes: 1.0
- Configuration: Panel Mount
from Gefran
ADL300 AC Lift Drive Series for Gearless and Geared Elevator systems. The ADL300 Series, suitable for new installations and modernization, encompasses safety, comfort, and cost advantages besides a long life reliability, being the ideal drive for modern high demanding elevator systems. Product at a... [See More]
- Phase : Single Phase; Three Phase
- Power: 1100 to 75000
- Motor / System: Vector Feedback
- PC-Based Bus: CANopen
from Mitsubishi Electric Automation, Inc.
The FR-A800-E adds an integrated web server and 100Mbit Ethernet TCP/IP connectivity as standard to the existing network options of the FR-A800 flagship multi-use inverter. The FR-A800-E provides machine builders and systems integrators an increased ability for remote system monitoring and parameter... [See More]
- Phase : Single Phase; Three Phase
- Product: Variable Speed
- Power: 0.7500 to 600
- PC-Based Bus: Ethernet
from Sinotech
Motor controllers can be customized upon request. [See More]
- Phase : Single Phase
- Motor / System: Induction
- Axes: 1.0
- Power: 6 to 140
from Eaton Corporation - Drives
Cutler-Hammer ® NFX9000 adjustable frequency AC Drives from Eaton ’s electrical business are designed to provide adjustable speed control of three-phase motors. These microprocessor- based drives have standard features that can be programmed to tailor the drive ’s performance to suit... [See More]
- Phase : Single Phase
- Motor / System: Sensorless Vector
- Axes: 1.0
- Power: 187
from Nidec Control Techniques
Commander SK is a compact, easy-to-use general purpose drive that simplifies the installation and configuration of the drive to save time, yet has the performance and depth of functions required to solve more complex applications challenges, delivering superior value and motor control. All drives in... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector
- Axes: 1.0
- Power: 2200
from Dart Controls, Inc.
The MD plus is a field-programmable closed loop DC drive system employing an advanced velocity-form PID algorithm for accurate and responsive control. The MD plus system also features a unique, isolated 4-20mA input and output for easy integration with existing Process Control systems. The MD plus... [See More]
- Phase : Single Phase
- Power: 373
- Axes: 1.0
- Product: Velocity-form PID; Variable Speed
from American Control Electronics
The PMF Series is a variable frequency drive designed to run 115 or 230 VAC motors, whether single phase or three phase, at 50 or 60 Hz. With our "Doubler Mode", a 115 VAC line can be doubled to control 230 VAC motors. And unlike most variable frequency drives, the PMF Series will allows a 230 VAC... [See More]
- Phase : Single Phase
- Power: 60 to 1100
- Axes: 1.0
- Configuration: PC Board
from Magnatex Pumps, Inc.
The cost-effective variable speed control solution for general purpose applications. Magnetic Flux Vector Control. Auto-tuning. Selectable cooling fan operation mode. Adjustable carrier frequency (0.7kHz to 14.5kHz). Compatible with FR-PU04 user interface. UL & cUL listed / CE marked [See More]
- Phase : Single Phase
- Product: Variable Speed
- Axes: 1.0
- Configuration: Panel Mount
from Gefran
Gefran has applied its application experience to the new series of ADV200 WA industrial drive inverters for the Water Treatment and HVAC sectors. Specific power structures for variable or quadratic loads, combined with intelligent optimisation of energy consumption and specialised functions, offer... [See More]
- Phase : Single Phase; Three Phase
- Power: 1500 to 1.20E6
- Motor / System: Vector Feedback
- PC-Based Bus: CANopen; DeviceNet; Ethernet; PROFIBUS; RS485; Ethercat, BACnet, LonWorks
from Mitsubishi Electric Automation, Inc.
The A700 is a high performance drive that replaces the popular A500(L) series. It features many of the special technologies originally developed for Mitsubishi Electric servo drive products, such as adaptive auto-tuning that automatically compensates for changes in load inertia. The result is... [See More]
- Phase : Single Phase; Three Phase
- PC-Based Bus: SSCNETIII Fiber Optic Communication Network
- Product: Variable Speed
- Operating Temperature: -10 to 50
from Nidec Control Techniques
Commander SK is a compact, easy-to-use general purpose drive that simplifies the installation and configuration of the drive to save time, yet has the performance and depth of functions required to solve more complex applications challenges, delivering superior value and motor control. All drives in... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector
- Axes: 1.0
- Power: 3000
from Dart Controls, Inc.
A general purpose, economical variable speed control for small DC and universal motor applications featuring: dual input voltages of 12/24 VAC or 120/240 VAC with DC output current rating of 2 Amps, adjustable trimpot settings, and quick connect terminal pins. The 15 Series is available in two... [See More]
- Phase : Single Phase
- Motor / System: DC Brushed
- Axes: 1.0
- Power: 18.65
from Magnatex Pumps, Inc.
lsquo;Big Drive ’ Vector Control Capability in a micro drive - delivering outstanding performance for a wide range of demanding loads. Advanced Magnetic Flux Vector Control gives 120:1 speed range. All capacities have built-in brake chopper. USB communications for fast commissioning. Standard... [See More]
- Phase : Single Phase
- Product: Variable Speed
- Axes: 1.0
- PC-Based Bus: RS485; USB
from Mitsubishi Electric Automation, Inc.
The D700 series is the direct replacement for the S500 & S500E series and includes the following improvements: Increased capacity up to 10HP in both 230V and 460V. Safety stop compliant. RoHS compliant. Includes brake chopper circuit as standard. Modbus RTU included as standard via the RJ45... [See More]
- Phase : Single Phase; Three Phase
- Product: Variable Speed
- Power: 93.27 to 7461
- PC-Based Bus: SSCNETIII Fiber Optic Communication Network
from Nidec Control Techniques
Digitax ST servo drives are optimized for pulse duty servo applications requiring high peak torque (up to 300% peak), dynamic response, ease of use and flexible integration features. Digitax ST drives are perfectly matched for use with Unimotor hd servo motors. 230V models are suitable for single... [See More]
- Phase : Single Phase
- Power: 609
- Axes: 1.0 to 1.5
- PC-Based Bus: CANopen (optional feature); DeviceNet (optional feature); Ethernet (optional feature); Interbus-S (optional feature); PROFIBUS (optional feature); RS485; SERCOS (optional feature); Modbus RTU Standard, Optional Features: PROFINET, EtherCAT, CTNet, CTSync, CAN
from Dart Controls, Inc.
The 150D Series from Dart Controls sets a new standard for SCR drive design. The 150D Series was developed specifically with the OEM in mind, with standard features and convenient options required for most applications. The 150D Series is also a drive designed with the future in mind – a... [See More]
- Phase : Single Phase
- Product: Variable Speed
- Axes: 1.0
- Operating Temperature: -10 to 45
from Magnatex Pumps, Inc.
Built to optimize 3-phase motor control, saving energy for virtually all general purpose applications. UL Type 1, plenum rated, enclosure designs (NEMA 1). Built-in EMC filter. FR-DU07 programming dial and FR-Configurator programming software. Bi-directional coasting motor restart. RS-485... [See More]
- Phase : Single Phase
- Product: Variable Speed
- Axes: 1.0
- PC-Based Bus: RS485
from Mitsubishi Electric Automation, Inc.
The E700 Series is the latest generation of Mitsubishi Electric ’s Micro Sized Variable Frequency Drives. It replaces the popular E500 Series and utilizes the same mounting foot print. Advanced features and functions such as USB port for commissioning and monitoring, embedded M-dial and... [See More]
- Phase : Single Phase; Three Phase
- Product: Variable Speed
- Power: 93.27 to 14923
- PC-Based Bus: SSCNETIII Fiber Optic Communication Network
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Phase : Single Phase
- Power: 775
- Axes: 1.0 to 1.5
- PC-Based Bus: DeviceNet (optional feature); Ethernet (optional feature); PROFIBUS (optional feature); Modbus RTU Standard
from Dart Controls, Inc.
The 130 Series reversing control from Dart Controls utilizes Dart's unique zero-speed detect and solid state dynamic braking circuits. These circuits eliminate the contact arcing and failed braking problems associated with other reversing and dynamic braking controls. Dart's zero-speed detect... [See More]
- Phase : Single Phase
- Motor / System: DC Brushed
- Axes: 1.0
- Power: 93.27
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Phase : Single Phase
- Power: 770
- Axes: 1.0 to 1.5
- Product: Variable Speed
from Dart Controls, Inc.
The 250 Series offers superb flexibility, reliability, and value. A general purpose, economical control rated to 2 horsepower, it provides the ultimate in standard features and versatility including: dual voltage (120/240VAC), adjustable H.P. settings, packaged power bridge, barrier terminal strip,... [See More]
- Phase : Single Phase
- Motor / System: DC Brushed
- Axes: 1.0
- Power: 14.92
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Phase : Single Phase
- Power: 1270
- Axes: 1.0 to 1.5
- Product: Variable Speed
from Dart Controls, Inc.
Dart's top of the line DC speed control is reliable, versatile, and economical. Rated to 3 horsepower, it provides many standard features typically offered as options. The Dart 500 Series control combines advanced engineering design, quality component selection and rigorous quality control to... [See More]
- Phase : Single Phase
- Motor / System: DC Brushed
- Axes: 1.0
- Power: 93.27
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Phase : Single Phase
- Power: 1770
- Axes: 1.0 to 1.5
- Product: Variable Speed
from Dart Controls, Inc.
The Accu-Set is a compact, economical control that can be used with conventional AC, DC, or Brushless DC adjustable speed drive systems to provide an LED display of set speeds and precise, digital closed loop motor speed control. An on-board microprocessor with non-volatile memory coupled with... [See More]
- Phase : Single Phase
- Motor / System: DC Brushless; DC Servo; AC Servo
- Axes: 1.0
- Product: Variable Speed
from Nidec Control Techniques
The compact, easy-to-use Epsilon EP servo drive is scalable from a simple amplifier to a completely programmable 1.5-axis motion controller capable of the performance necessary for applications that require a high degree of precision. For added application flexibility, the Epsilon EP is available in... [See More]
- Phase : Single Phase
- Power: 2320
- Axes: 1.0 to 1.5
- Product: Variable Speed
from Dart Controls, Inc.
A dependable, economical and compact variable AC voltage supply manufactured especially for the vibratory feeder, fan, pump, heating, and lighting industries. All models feature single-phase AC input and fully variable AC output. The enclosed version comes with a rugged housing, power on/off switch,... [See More]
- Phase : Single Phase
- Motor / System: AC Shaded Pole Motor; Permanent Split Capacitor Motor; Permanent Split-Phase, Universal, or Resistive Load Motors
- Axes: 1.0
- Power: 1150
from Nidec Control Techniques
Unidrive M motor controls have superior open and closed loop control of AC induction, permanent magnet and servo motors, and deliver maximum machine throughput. Available onboard real-time Ethernet (IEEE 5188) models provide highly accurate drive-to-drive synchronization solutions. Scalable machine... [See More]
- Phase : Single Phase; Three Phase
- Motor / System: Induction; Sensorless Vector; Vector Feedback; AC Servo
- Axes: 1.0
- Power: 1119
from Dart Controls, Inc.
Variable AC voltage supply . For use with resistive loads, permanent split-capacitor, permanent split-phase, or universal motor (not for capacitor start motors). Typically used on small blowers and lighting. THIS IS NOT THE EQUIVALENT OF A VARIABLE FREQUENCY / AC INVERTER DRIVE. [See More]
- Phase : Single Phase
- Motor / System: AC Shaded Pole Motor; Permanent Split Capacitor Motor; Permanent Split-Phase, Universal, or Resistive Load Motors
- Axes: 1.0
- Operating Temperature: -10 to 45
from Nidec Control Techniques
Unidrive M motor controls have superior open and closed loop control of AC induction, permanent magnet and servo motors, and deliver maximum machine throughput. Available onboard real-time Ethernet (IEEE 5188) models provide highly accurate drive-to-drive synchronization solutions. Scalable machine... [See More]
- Phase : Single Phase; Three Phase
- Motor / System: Induction; Sensorless Vector; Vector Feedback; AC Servo
- Axes: 1.0
- Power: 3731
from Nidec Control Techniques
Unidrive M motor controls have superior open and closed loop control of AC induction, permanent magnet and servo motors, and deliver maximum machine throughput. Available onboard real-time Ethernet (IEEE 5188) models provide highly accurate drive-to-drive synchronization solutions. Scalable machine... [See More]
- Phase : Single Phase; Three Phase
- Motor / System: Induction; Sensorless Vector; Vector Feedback; AC Servo
- Axes: 1.0
- Power: 7461
from Nidec Control Techniques
Unidrive M motor controls have superior open and closed loop control of AC induction, permanent magnet and servo motors, and deliver maximum machine throughput. Available onboard real-time Ethernet (IEEE 5188) models provide highly accurate drive-to-drive synchronization solutions. Scalable machine... [See More]
- Phase : Single Phase; Three Phase
- Motor / System: Induction; Sensorless Vector; Vector Feedback; AC Servo
- Axes: 1.0
- Power: 11192
from Nidec Control Techniques
Unidrive M100 AC drive - Value drive with quality and performance for open loop applications. 0.33hp - 10hp (0.25kW - 7.5kW). 100V / 200V / 400V. M100 delivers an economical open loop drive for general Manufacturing Automation applications, with Control Techniques ’ proven quality and class... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector; Variable Frequency Drive
- Axes: 1.0
- Power: 246
from Nidec Control Techniques
Unidrive M200 AC drive - Flexible machine integration through communications. 0.33hp - 30hp (0.25kW - 22kW). 100V / 200V / 400V / 575V. M200 adds useful networking capability, additional I/O and improved motor control performance. Easy upgrade for existing Commander SK users. M200 delivers... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector; Variable Frequency Drive, Rotor Flux Control (RFC)
- Axes: 1.0
- Power: 246
from Nidec Control Techniques
Unidrive M300 AC drive - Enhance throughput with Machine Safety. 0.33hp - 30hp (0.25kW - 22kW). 100V / 200V / 400V / 575V. M300 adds integrated Machine Safety. M300 helps machine builders maximize up-time and meet modern functional safety standards. Dual onboard Safe Torque Off (STO) inputs offer... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector; Variable Frequency Drive, Rotor Flux Control (RFC)
- Axes: 1.0
- Power: 246
from Nidec Control Techniques
Unidrive M400 AC drive - Fast set-up and diagnosis with real-text display, plus integrated CODESYS based PLC. 0.33hp - 150hp (0.25kW - 110kW). 100V / 200V / 400V / 575V / 690V. M400 adds an optional enhanced LCD keypad, precise frequency following and onboard Programmable Logic Control (PLC). Easy... [See More]
- Phase : Single Phase
- Motor / System: Induction; Sensorless Vector; Variable Frequency Drive, Rotor Flux Control (RFC)
- Axes: 1.0
- Power: 246
from Nidec Control Techniques
Unidrive SP drives can be configured to operate in the following modes: Open-loop V/Hz AC drive. Open-loop Vector AC drive. Open-loop Rotor Flux Control (RFC). Closed-loop Vector AC drive. Servo for synchronous permanent magnet motors / brushless servo motors. The drives are easy to install and... [See More]
- Phase : Single Phase; Three Phase
- Motor / System: Induction; Sensorless Vector; Vector Feedback
- Axes: 1.0
- Power: 370